Manual Bosch LCD

32 pages 7.08 mb
Download

Go to site of 32

Summary
  • Bosch LCD - page 1

    IMPOR T ANT : IMPOR T ANT : IMPOR T ANTE: Read Before Using Lire avant usage Leer antes de usar Operating/Safety Instructions Consignes de fonctionnement/sécurité Instrucciones de funcionamiento y seguridad 1944LCD For English Version Version française Versión en español See page 2 Voir page 12 Ver la página 22 1-877-BOSCH99 (1-877-267-2499) ...

  • Bosch LCD - page 2

    -2 - Paint Stripping Safety Instructions Extreme care should be taken when stripping paint. The peelings, residue and vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on surfaces, hand to mouth contact can result in the ingest ...

  • Bosch LCD - page 3

    -3- General Safety Rules for Heat Guns Never use heat guns as hairdryers! You will be seriously injured. Avoid contact with nozzle of heat gun during use. This heat gun generates temperatures as high as 1200 degrees Fahrenheit. You may be seriously burned. Do not use heat guns in the rain, moisture or immerse in water. Exposing the heat gun element ...

  • Bosch LCD - page 4

    -4- When operating a heating appliance with an extension cord while outdoors, use only extension cords marked W–A or W. These cords are rated for outdoor use and reduce the risk of electric shock. Personal Safety Stay alert, watch what you are doing and use COMMON SENSE when operating a heating appliance. A moment of inattention or use of drugs, ...

  • Bosch LCD - page 5

    -5- Model number .................................. 1944LCD Size ............................... 8"L x 5-1/4"W x 9-1/2"H Nozzle opening ............................... 1-3/16" dia. Avg. air volume .............................. 3.6-17.6 cfm Net weight ....................................... 2.2 Ibs. Voltage rating .............. ...

  • Bosch LCD - page 6

    -6- FIG. 2 FIG. 3 BM 1619929572 08-07 8/28/07 9:45 AM Page 6 ...

  • Bosch LCD - page 7

    Your Bosch Heat Gun is a heavy-duty, industrial-quality, general-purpose heat gun. You can do more heating jobs faster with this heat gun because of its high power and air flow ratings. This product provides a fast flow of heated air for applications such as activating adhesives, bending and forming plastics, curing epoxies, deburring plastics, def ...

  • Bosch LCD - page 8

    SETTING THE AIR FLOW The air flow can be regulated with the air flow button (Fig. 1). Minimum air flow (approx. 3.6-8.8 CFM, depending on temperature setting) Maximum air flow (approx. 17.6 CFM) The CFM at each of the 10 airflow settings depends on the temperature setting. For example, at the lowest temperature (120 degrees) the lowest airflow sett ...

  • Bosch LCD - page 9

    -9- T ypical Applications Temperature settings given in the application examples are suggested values that, depending on the material characteristics, can deviate. The distance between the nozzle and workpiece is dependent on the material to be processed. The ideal temperature should first be ascertained by performing a test. Therefore, begin with ...

  • Bosch LCD - page 10

    SHRINK TUBING Attach the optional HG020 concentrator or H G040 reflector nozzle. Select the diameter of t he heat-shrink tubing according to the workpiece, for example, a cable lug (Fig. 7). Use stand to free both hands. Slide tubing over area to be insulated. Place in air stream and move with a side to side motion until tubing has shrunk. Remove f ...

  • Bosch LCD - page 11

    - 11 - Service Preventive maintenance p erformed by unauth- o rized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recommend that all tool service be performed by a Bosch Factory Service Center or Autho- rized Bosch Service Station. Cleaning To avoid accidents always disconnect the tool from ...

  • Bosch LCD - page 12

    -12- Important consignes de sécurité pour pistolets chauffants Vous devez lire et comprendre toutes les instructions. Le non-respect, même partiel, des instructions ci-après entraîne un risque de choc életrique, d'incendie et/ou de blessures graves. A VERTISSEMENT ! Consignes de sécurité pour le décapage de la peinture Il faut être t ...

  • Bosch LCD - page 13

    -13- Consignes générales de sécurité aux pistolets thermiques N’utilisez jamais de pistolet thermique comme sèche-cheveux ! Vous risquez des blessures graves. Évitez de toucher la buse du pistolet thermique pendant l’utilisation. Ce pistolet thermique génère des températures pouvant atteindre 1000 degrés Fahrenheit. Vous risquez des b ...

  • Bosch LCD - page 14

    alors que vous utilisez un appareil chauffant peut être dangereux. Utilisez du matériel de sécurité. Portez toujours des lunettes à coques latérales. Un masque anti- poussières, des gants protecteurs, des chaussures de sécurité ou des chaussures antidérapantes doivent être portés dans les conditions appropriées. Évitez la mise en marc ...

  • Bosch LCD - page 15

    -15- Description fonctionnelle et spécifications Débranchez la fiche de la prise de courant avant d'effectuer quelque assemblage ou réglage que ce soit ou de changer les accessoires. Ces mesures de sécurité préventive réduisent le risque d'une mise en marche accidentelle de l'outil. A VERTISSEMENT ! Pistolet thermique Numéro ...

  • Bosch LCD - page 16

    -16- FIG. 2 FIG. 3 BM 1619929572 08-07 8/28/07 9:45 AM Page 16 ...

  • Bosch LCD - page 17

    Consignes de fonctionnement -17- Votre pistolet thermique Bosch est un pistolet à air chaud polyvalent de capacité élevée et de qualité industrielle. Sa puissance et son débit élevés vous permettront d’accomplir plus rapidement vos travaux à chaud. Cet appareil émet un flux rapide d’air chaud pouvant servir à activer les adhésifs, p ...

  • Bosch LCD - page 18

    -18- RÉGLAGE DU DÉBIT D'AIR Le débit d'air peut être contrôlé au moyen du bouton de réglage du débit d'air (Fig. 1). Débit d'air minimum (approx. 3,6-8,8 pi cu/mn en fonction du réglage de température) Débit d'air maximum (approx. 17,6 pi cu/mn) Le débit d'air à chacun des 10 réglages de débit d'ai ...

  • Bosch LCD - page 19

    -19- Les réglages de températures présentés dans les exemples d'applications ne sont que des suggestions de valeurs. Les réglages peuvent varier en fonction des circonstances matérielles. La distance idéale entre la buse et la pièce à travailler dépend du matériau en cours d'usinage. Faites un test pour déterminer la températ ...

  • Bosch LCD - page 20

    -20- TUBES THERMORÉTRÉCISSABLES Attachez le concentrateur HG020 ou la buse à réflecteur en option HG040. Sélectionnez le diamètre de tube thermorétrécissable désiré en fonction de la pièce sur laquelle vous travaillez – par exemple, une cosse de câble de batterie (Fig. 7). Posez l’appareil sur son support afin de garder les deux mai ...

  • Bosch LCD - page 21

    Service Tout entretien préventif effectué par des personnels non autorisés peut résulter en mauvais placement de fils internes ou de pièces, ce qui peut présenter un danger grave. Nous vous conseillons de faire faire tout l’entretien par un centre de service d’usine Bosch ou une station service agréée Bosch. Nettoyage Pour éviter les a ...

  • Bosch LCD - page 22

    -22- Importante instrucciones de seguridad para pistolas de aire caliente Lea y entienda todas las instrucciones. El incumplimiento de todas las instrucciones indicadas a continuación puede dar lugar a sacudidas eléctricas, incendios y/o lesiones personales graves. A DVERTENCIA ! Instrucciones de seguridad para la remoción de pintura Debe teners ...

  • Bosch LCD - page 23

    -23- Normas generales de seguridad pa ra pi st ol as de ai re ca li en te Nunca utilice las pistolas de aire caliente como secadores de pelo! Si lo hace, sufrirá lesiones graves. Evite el contacto con la boquilla de la pistola de aire caliente durante el uso. Esta pistola de aire caliente genera temperaturas de hasta 1000 grados Fahrenheit. Usted ...

  • Bosch LCD - page 24

    cordones tienen capacidad nominal para el uso a la intemperie y reducen el riesgo de sacudidas eléctricas. Seguridad personal Manténgase alerta, fíjese en lo que está haciendo y use EL SENTIDO COMUN al utilizar un aparato de aire caliente. Un momento de distracción o el uso de drogas, alcohol o medicinas mientras se maneja un aparato de aire c ...

  • Bosch LCD - page 25

    -25- Descripción funcional y especificaciones Desconecte el enchufe de la fuente de energía antes de realizar cualquier ensamblaje o ajuste, o cambiar accesorios. Estas medidas de seguridad preventivas reducen el riesgo de arrancar la herramienta accidentalmente. ADVERTENCIA ! Pistola de aire caliente Número de modelo ........................... ...

  • Bosch LCD - page 26

    -26- FIG. 2 F IG. 3 BM 1619929572 08-07 8/28/07 9:45 AM Page 26 ...

  • Bosch LCD - page 27

    -27- Instrucciones de funcionamiento Su es una pistola de aire caliente Bosch con calidad industrial, para usos múltiples y servicio pesado. Su alta potencia y flujo de aire extra fuerte le permitirán realizar más trabajos de calentamiento con mayor rapidez. Este producto proporciona un flujo rápido de aire caliente para usos tales como la acti ...

  • Bosch LCD - page 28

    -28- AJUSTE DEL FLUJO DE AIRE El flujo de aire se puede regular con el botón de flujo de aire (Fig. 1). Flujo de aire mínimo (aprox. 3.6-8.8 PCM, dependiendo del ajuste de temperatura) Flujo de aire máximo (aprox. 17.6 PCM) Los PCM en cada uno de los 10 ajustes de flujo de aire dependen del ajuste de temperatura. Por ejemplo, a la temperatura m? ...

  • Bosch LCD - page 29

    -29- Aplicaciones típicas Los ajustes de temperatura dados en los ejemplos de aplicaciones son valores sugeridos que, dependiendo de las características del material, se pueden desviar. La distancia entre la boquilla y la pieza de trabajo depende del material que se vaya a procesar. La temperatura ideal se debería determinar primero realizando u ...

  • Bosch LCD - page 30

    -30- CONTRACCIÓN TÉRMICA DE TUBOS Instale la boquilla concentradora HG020 opcional o la boquilla reflectora HG040 opcional. Seleccione el diámetro del tubo termocontraíble de acuerdo con la pieza de trabajo, por ejemplo, un talón de cable (Fig. 7). Ponga la pistola en su pedestal para dejar las manos libres. Deslice el tubo sobre el área a ai ...

  • Bosch LCD - page 31

    -31- (* = equipo estándar) (** = accesorios opcionales) * Estuche de transporte ** Reflector ** Concentrador ** Esparcidor ** Deflector Accesorios Servicio El mantenimiento preventivo realizado por personal no autorizado pude dar lugar a la colocación incorrecta de cables y componentes internos que podría constituir un peligro serio. Recomendamo ...

  • Bosch LCD - page 32

    1 619 929 572 08/07 Printed in Germany LIMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from d efects in material or workmanship for a period of one year from date of purchase. SELLER’S SOL ...

Manufacturer Bosch Category Impact Driver

Documents that we receive from a manufacturer of a Bosch LCD can be divided into several groups. They are, among others:
- Bosch technical drawings
- LCD manuals
- Bosch product data sheets
- information booklets
- or energy labels Bosch LCD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bosch LCD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bosch LCD, service manual, brief instructions and user manuals Bosch LCD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bosch LCD.

Similar manuals

A complete manual for the device Bosch LCD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bosch LCD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bosch LCD.

A complete Bosch manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bosch LCD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bosch LCD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bosch LCD, that we can find in the current document
3. Tips how to use the basic functions of the device Bosch LCD - which should help us in our first steps of using Bosch LCD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bosch LCD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bosch LCD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bosch LCD?

Use the form below

If you did not solve your problem by using a manual Bosch LCD, ask a question using the form below. If a user had a similar problem with Bosch LCD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)