English dropdown-ico

Manual Hobart 1612P

8 pages 1.5 mb
Download

Go to site of 8

Summary
  • Hobart 1612P - page 1

    1612P EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 19370 (4-95) MODEL 1612P SLICER MODEL 1612P ML-104587 ...

  • Hobart 1612P - page 2

    – 2 – Installation, Operation, and Care of MODEL 1612P SLICER SA VE THESE INSTRUCTIONS GENERAL The model 1612P Slicer is equipped with a Hobart-designed motor and features the exclusive Hobart Stay-Sharp cast solid stainless steel knife. The model 1612P is available for single-phase electrical service and is furnished with a cord and plug as st ...

  • Hobart 1612P - page 3

    – 3 – INST ALLA TION UNPACKING Immediately after unpacking the slicer, check it for possible shipping damage. If this machine is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery. Prior to installing the slicer, test the electrical service to assure it agrees with the specifications on the machi ...

  • Hobart 1612P - page 4

    – 4 – OPERA TION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE. The TOP KNIFE COVER (Fig. 2) must be in position and secured with the LATCH KNOB. The RING GUARD (Fig. 3) is not removable. The DEFLECTOR accessory, if equipped, is mounted behind the blade on a spring cl ...

  • Hobart 1612P - page 5

    – 5 – CLEANING This machine MUST be thoroughly cleaned and sanitized after each day’s operation or anytime it is not to be used for an extended period of time. WARNING : THE SLICER KNIFE IS VERY SHARP. EXERCISE EXTREME CAUTION WHEN WORKING NEAR THE KNIFE. WARNING : UNPLUG MACHINE POWER CORD AND TURN THE INDEX KNOB FULLY CLOCKWISE BEFORE CLEAN ...

  • Hobart 1612P - page 6

    – 6 – Carefully reassemble the top knife cover to the slicer by placing it on the guide pins, rotating the latch knob counterclockwise until it drops into position, and releasing the knob. If equipped, clip the deflector accessory to the knife support. The ring guard is not removable. The Model 1612P has a cleaning leg located underneath the sl ...

  • Hobart 1612P - page 7

    – 7 – Remove the carriage tray and set the Index Knob at 50. Unscrew the thumb screw on the sharpener and assemble the sharpener in the slot at the bottom of the gauge plate. Lift the sharpener upward in the slot and tighten the thumb screw to fit (Fig. 8). Fig. 8 Plug in the power cord and pull the switch knob to start the slicer. With the lef ...

  • Hobart 1612P - page 8

    – 8 – LUBRICATION WARNING : UNPLUG MACHINE POWER CORD. The carriage slide rod reservoir (Fig. 11) should be filled monthly with several drops of Lubriplate FM0-200-AW oil. A four-ounce container of this oil was supplied with the slicer. DO NOT use vegetable oil. Occasionally, the gauge plate slide rods (Fig. 12) should be lightly coated with Lu ...

Manufacturer Hobart Category Kitchen Utensil

Documents that we receive from a manufacturer of a Hobart 1612P can be divided into several groups. They are, among others:
- Hobart technical drawings
- 1612P manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart 1612P
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart 1612P.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart 1612P, service manual, brief instructions and user manuals Hobart 1612P. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart 1612P.

Similar manuals

A complete manual for the device Hobart 1612P, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart 1612P by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart 1612P.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart 1612P - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart 1612P, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart 1612P, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart 1612P - which should help us in our first steps of using Hobart 1612P
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart 1612P
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart 1612P in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart 1612P?

Use the form below

If you did not solve your problem by using a manual Hobart 1612P, ask a question using the form below. If a user had a similar problem with Hobart 1612P it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)