Manual Barco R9001070

121 pages 5.09 mb
Download

Go to site of 121

Summary
  • Barco R9001070 - page 1

    OWNER'S MANUAL DATA 2100 R9001070 Art. No. :R5975696 Date: 140798 BARCO PROJECTION SYSTEMS OWNER'S MANUAL DATA 2100 R9001070 Art. No. :R5975696 Date: 140798 BARCO PROJECTION SYSTEMS Rev. : 04 Rev. : 04 ...

  • Barco R9001070 - page 2

    Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998 All rights reserved. Trademarks are the rights of their respective owners. Printed in Belgium Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, July 1998 All ...

  • Barco R9001070 - page 3

    Table of contents 5975696 BARCODATA 2100 140798 1-1 Table of contents 5975696 BARCODATA 2100 140798 1-1 WARNINGS & SAFETY INSTRUCTIONS ................................................................................................. ............................................ 1 - 1 AVERTISSEMENTS & PRESCRIPTIONS DE SECURITE ............... ...

  • Barco R9001070 - page 4

    Table of contents 1-2 5975696 BARCODATA 2100 140798 Table of contents 1-2 5975696 BARCODATA 2100 140798 INSTALLATION SET UP ............................................................................................................ .......................................................... 4 - 1 LOCATION AND FUNCTION OF CONTROLS .................. ...

  • Barco R9001070 - page 5

    Table of contents 5975696 BARCODATA 2100 140798 1-3 Table of contents 5975696 BARCODATA 2100 140798 1-3 Picture Controls with D irect Access. ........................................................................................... ............................................... 8 - 4 Sound Controls with Direct Access. ........................... ...

  • Barco R9001070 - page 6

    Table of contents 1-4 5975696 BARCODATA 2100 140798 Table of contents 1-4 5975696 BARCODATA 2100 140798 INSTALLATION ................................................................................................................... .............................................................. 11-1 Starting Up the Installation Mode ............... ...

  • Barco R9001070 - page 7

    Table of contents 5975696 BARCODATA 2100 140798 1-5 Table of contents 5975696 BARCODATA 2100 140798 1-5 Appendix D : Lens Cleaning Procedure ............................................................................................................................... .............. D-1 Appendix E : Source numbers 90 - 99 .......................... ...

  • Barco R9001070 - page 8

    Safety Instructions 5975696 BARCODATA 2100 140798 1-1 Safety Instructions 5975696 BARCODATA 2100 140798 1-1 WARNINGS AVERTISSEMENTS Safety Instructions Prescriptions de sécurité On Safety sécurité On Installation installation On Servicing entretien et réparation On Cleaning nettoyage On Repacking re-emballage On Illumination éclairage WARNING ...

  • Barco R9001070 - page 9

    Presciptions de sécurité 1-2 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-2 5975696 BARCODATA 2100 140798 Remarque sur la Sécurité Les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales EN60950, UL 1950 et CSA C22.2 No. 950. Ces normes de sécurité sont imposées aux équipements de l ...

  • Barco R9001070 - page 10

    Safety Instructions 5975696 BARCODATA 2100 140798 1-3 Safety Instructions 5975696 BARCODATA 2100 140798 1-3 Notice on Safety Projectors are built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2 No. 950, which are the safety standards of information technology equipment including electrical bu ...

  • Barco R9001070 - page 11

    Presciptions de sécurité 1-4 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-4 5975696 BARCODATA 2100 140798 RISQUE D'ELECTRO- CUTION NE PAS OUVRIR ATTENTION ATTENTION : AFIN DE REDUIRE LE RISQUE DE CHOCS ELECTRIQUES, NE PAS ENLEVER LE COUVERCLE (OU LE DOS) IL N'Y A PAS DE PIECES REPARABLES PAR L'UTILISATEUR A L'INT ...

  • Barco R9001070 - page 12

    Safety Instructions 5975696 BARCODATA 2100 140798 1-5 Safety Instructions 5975696 BARCODATA 2100 140798 1-5 The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons. The exclamation point within a triangle is in- tended to tell the user that important ...

  • Barco R9001070 - page 13

    Presciptions de sécurité 1-6 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-6 5975696 BARCODATA 2100 140798 Instructions pour lutilisateur : Si cet équipement cause des interférences de radio ou de télévision, lutilisateur peut essayer de corriger les interférences en appliquant une ou plusieurs de les mesures suivantes : - ...

  • Barco R9001070 - page 14

    Safety Instructions 5975696 BARCODATA 2100 140798 1-7 Safety Instructions 5975696 BARCODATA 2100 140798 1-7 Instructions to the user : if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures : - Re-orientation of the receiving antenna for the r ...

  • Barco R9001070 - page 15

    Presciptions de sécurité 1-8 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-8 5975696 BARCODATA 2100 140798 * Pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * Si on utilise une rallonge, vérifier que le total des courants des appareils raccordés à cette rallonge ne dépasse pas la capacité ...

  • Barco R9001070 - page 16

    Safety Instructions 5975696 BARCODATA 2100 140798 1-9 Safety Instructions 5975696 BARCODATA 2100 140798 1-9 * Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. * To disconnect the cord, pull it out by the plug. Never pull the cord itself. * If an extension cord is used with this product ...

  • Barco R9001070 - page 17

    Presciptions de sécurité 1-10 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-10 5975696 BARCODATA 2100 140798 Contacter le service technique qualifié dans les cas suivants : - Si le cordon secteur ou la prise de courant est endommagé ou effiloché. - Si on a répandu du liquide dans le projecteur. - Si lappareil a été exposé ? ...

  • Barco R9001070 - page 18

    Safety Instructions 5975696 BARCODATA 2100 140798 1-11 Safety Instructions 5975696 BARCODATA 2100 140798 1-11 risk of electric shock! Refer all projector service to a qualified BARCO service center. Call for service in the following conditions : - When the power cord or plug is damaged or frayed. - If liquid has been spilled into the projector. - I ...

  • Barco R9001070 - page 19

    Presciptions de sécurité 1-12 5975696 BARCODATA 2100 140798 Presciptions de sécurité 1-12 5975696 BARCODATA 2100 140798 Eclairage Pour garantir la meilleure qualité possible de limage projetée, il est essentiel que léclairage ambiant incident sur lécran soit réduit au strict minimum. Lors de linstallation du projecteur et de l? ...

  • Barco R9001070 - page 20

    Safety Instructions 5975696 BARCODATA 2100 140798 1-13 Safety Instructions 5975696 BARCODATA 2100 140798 1-13 in handy if you ever have to ship your projector. For maximum protection, repack your set as it was originally packed at the factory. On Illumination In order to obtain the best quality for the projected image, it is essential that the ambi ...

  • Barco R9001070 - page 21

    Unpacking & Dimensions 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 5975696 BARCODATA 2100 140798 2-1 2-1 UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU ...

  • Barco R9001070 - page 22

    Unpacking & Dimensions 2-2 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 2-2 5975696 BARCODATA 2100 140798 Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is mounted on a wooden board with 3 bolts (M ...

  • Barco R9001070 - page 23

    Unpacking & Dimensions 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 5975696 BARCODATA 2100 140798 2-3 2-3 Projector Dimensions (units : mm) 641.5 405 20 0.5 63 33 5 22 4 14 1 55 35 141.2 20 250 22 0 278 127 5 194.9 603 2 25 245 67.5 Projector Dimensions (units : mm) 641.5 405 20 0.5 63 335 224 141 55 35 141.2 20 250 220 278 127 5 19 ...

  • Barco R9001070 - page 24

    Unpacking & Dimensions 2-4 5975696 BARCODATA 2100 140798 Unpacking & Dimensions 2-4 5975696 BARCODATA 2100 140798 310a. DRW Battery Installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. Before using the RCU, start first the battery installation procedure ...

  • Barco R9001070 - page 25

    Installation Guidelines 5975696 BARCODATA 2100 140798 3-1 Installation Guidelines 3-1 5975696 BARCODATA 2100 140798 INSTALLATION GUIDELINES Environment What about Ambient Light? Which Screen Type? What Image Size? How Big should the Image be? Where to Install the Projector? How to Install the Projector? INSTALLATION GUIDELINES Environment What abou ...

  • Barco R9001070 - page 26

    Installation Guidelines 3-2 5975696 BARCODATA 2100 140798 Installation Guidelines 5975696 BARCODATA 2100 140798 3-2 Installation Guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. * Environment Do not install the proje ...

  • Barco R9001070 - page 27

    Installation Guidelines 5975696 BARCODATA 2100 140798 3-3 Installation Guidelines 3-3 5975696 BARCODATA 2100 140798 * Which Screen Type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications. Screens are rated by how much light they reflect (or trans ...

  • Barco R9001070 - page 28

    Installation Guidelines 3-4 5975696 BARCODATA 2100 140798 Installation Guidelines 5975696 BARCODATA 2100 140798 3-4 * Where to Install the Projector? Definitions of the Abbreviation on drawings B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projecto ...

  • Barco R9001070 - page 29

    Installation Guidelines 5975696 BARCODATA 2100 140798 3-5 Installation Guidelines 3-5 5975696 BARCODATA 2100 140798 Table mounting of the BARCODATA 2100 (70% off-axis projection) Ceiling mounting of the BARCODATA 2100 (70% off-axis projection) Screen PD B Ce i ling Pr oj ec to r CD A CD = B + (S W x 0. 225) - A SH Opti c al axi s pr oj e ct i on le ...

  • Barco R9001070 - page 30

    Installation Guidelines 3-6 5975696 BARCODATA 2100 140798 Installation Guidelines 5975696 BARCODATA 2100 140798 3-6 ice technician. * How to Install a Projection Lens? The BARCODATA 2100 is supplied without any lens. The following lens is available : SD(1.2:1) - Video SD(1.2:1) SD(1.7:1) How to install the lens on the BARCODATA 2100? Remove the foa ...

  • Barco R9001070 - page 31

    Installation Guidelines 5975696 BARCODATA 2100 140798 3-7 Installation Guidelines 3-7 5975696 BARCODATA 2100 140798 Always use the BARCO ceiling support to attach your BARCODATA 2100 to the ceiling. The installation instruction for this support is enclosed in the packet of the set. Note : A ceiling mount adapter plate is needed to mount the project ...

  • Barco R9001070 - page 32

    Installation Set Up Installation Set Up 5975696 BARCODATA 2100 140798 4-1 4-1 5975696 BARCODATA 2100 140798 INSTALLATION SET UP Projector Configuration INSTALLATION SET UP Projector Configuration ...

  • Barco R9001070 - page 33

    Installation Set Up 4-2 Installation Set Up 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 4-2 The BARCODATA 2100 can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. 5 H D U 7 D E OH 5 HDU & HL O LQJ )U RQW  7DEO H )URQW &HLO LQJ The BARCODAT ...

  • Barco R9001070 - page 34

    Installation Set Up Installation Set Up 5975696 BARCODATA 2100 140798 4-3 4-3 5975696 BARCODATA 2100 140798 To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER . Highlight Installation by pushing the control disk up or down and press ENTER to select. The installation menu will be displayed. ENTER displays the Installat ...

  • Barco R9001070 - page 35

    Location and Functions of Control 5975696 BARCODATA 2100 140798 5-1 Location and Functions of Control 5975696 BARCODATA 2100 140798 5-1 LOCATION AND FUNCTION OF CONTROLS Front Panel Terminology Local Keypad Remote Control LOCATION AND FUNCTION OF CONTROLS Front Panel Terminology Local Keypad Remote Control ...

  • Barco R9001070 - page 36

    Location and Functions of Control 5-2 Location and Functions of Control 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 5-2 Front Panel Terminology 0 I SO UR CE 1 SO UR CE 4 SO UR CE 5 SO UR CE 2 SO UR CE 3 AUDIO OUT AU DIO IN C AUDIO IN B AU DI O IN A VID EO VI DEO S VID EO RGB H/ CV RGBH/CV L - R L - R L - R L - R IR RR G G BB H/C H/ ...

  • Barco R9001070 - page 37

    Location and Functions of Control 5975696 BARCODATA 2100 140798 5-3 Location and Functions of Control 5975696 BARCODATA 2100 140798 5-3 Power switch : '1 ' = o n, '0 ' = o ff Power input : switchable between 120 VAC and 230 VAC IR receiver : receiver for control signals transmitted from the RCU. Diagnostics code : a) source numb ...

  • Barco R9001070 - page 38

    Location and Functions of Control 5-4 Location and Functions of Control 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 5-4 Control Panel Terminology a. Local Keypad Getting access The keypad is located behind a door, screened with the name of the projector. To open the door, push once on the indicated side of the door and turn it to th ...

  • Barco R9001070 - page 39

    Location and Functions of Control 5975696 BARCODATA 2100 140798 5-5 Location and Functions of Control 5975696 BARCODATA 2100 140798 5-5 Remote Control (RCU) Local keypad COLO R PHASE SHARPN TINT BRIGH TN ST AN DB Y ENTER TEXT EX IT PAUSE CO NTRAST - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 - + - + - + - + - + Remote Control (RCU) Local keypad COLO R P ...

  • Barco R9001070 - page 40

    Location and Functions of Control 5-6 Location and Functions of Control 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 5-6 Terminology Back light key : when activated, all keys will lit up and visible in the dark. ADJ. : ADJUST key, to enter the adjustment mode or for quick exit in the adjustment mode. A ddress key (sunk key), to enter ...

  • Barco R9001070 - page 41

    Power Connection Power Connection 5975696 BARCODATA 2100 140798 6-1 6-1 5975696 BARCODATA 2100 140798 POWER CONNECTION POWER CONNECTION ...

  • Barco R9001070 - page 42

    Power Connection 6-2 Power Connection 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 6-2 0I SOURCE 1 SOURCE 4 SOURCE 5 SOURCE 2 SOURCE 3 AUDI O OUT AUDIO IN C AUDIO IN B AUDIO IN A VIDEO VIDEO S VID EO RGBH/CV RGBH/CV L - R L - R L - R L - R IR R R GG BB H/C H/C VV RS 23 2 I N RS 232 OU T CO MM PORT CTRL hardw ired remote Read ins truc ...

  • Barco R9001070 - page 43

    Power Connection Power Connection 5975696 BARCODATA 2100 140798 6-3 6-3 5975696 BARCODATA 2100 140798 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 - + - + - + - + - + When switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red. To start image projection, press the 'Stand by' but ...

  • Barco R9001070 - page 44

    Power Connection 6-4 Power Connection 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 6-4 Lamp Lifetime 30 hours before end of lamp lifetime, the following message will scroll over the screen for 1 minute. This message will be repeated every 30 minutes. Press EXIT to remove the message before the minute is over. When the end of the lamp ...

  • Barco R9001070 - page 45

    Connections Connections 5975696 BARCODATA 2100 140798 7-1 7-1 5975696 BARCODATA 2100 140798 INPUT CONNECTIONS Connecting a Video Source to the Video Input Connecting a S- Video Source to the S- Video Input Connecting a RGB Analog Source to the RGB Analog Input Connecting a Component Video Source to the RGB Inputs. Peripheral Equipment Connection Co ...

  • Barco R9001070 - page 46

    Connections Connections 7-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-2 Signal Input Connection to the Projector. The following sources can be connected to the projector : - Composite Video - S-Video - RGBS or RGsB - RGBHV - RGB3S or RG3sB - Component Video Source input Input type Digit button on Audio input R C U (lock is off) ...

  • Barco R9001070 - page 47

    Connections Connections 5975696 BARCODATA 2100 140798 7-3 7-3 5975696 BARCODATA 2100 140798 Connecting a Video Source to the BNC Input (source 1) Coposite video signals from a VCR, OFF air signal decoder, etc. ... 1 x BNC 1.0Vpp ± 3 dB Connect the audio input signals to the AUDIO A input when the audio lock is OFF (see also chapter "Controlli ...

  • Barco R9001070 - page 48

    Connections Connections 7-4 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-4 Connecting a Video source to the Cinch (RCA) input (source 2) Coposite video signals from a VCR, OFF air signal decoder, etc. ... 1 x Cinch (RCA) 1.0Vpp ± 3 dB Connect the audio input signals to the AUDIO A input when the audio lock is OFF (see also chapter ...

  • Barco R9001070 - page 49

    Connections Connections 5975696 BARCODATA 2100 140798 7-5 7-5 5975696 BARCODATA 2100 140798 Connecting a S-Video Source to the 4-pin mini DIN Input (source 3) Separate Y-luma/C-chroma signals for higher quality playback of Super VHS signals.. 1 x 4 pins plug pin configuration : 1 ground luminance 2 ground chrominance 3 luminance 1.0 Vpp ± 3 dB 4 c ...

  • Barco R9001070 - page 50

    Connections Connections 7-6 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-6 Connecting a RGB Analog Source to Source 4 or 5 RGB analog input terminals with automatic sync detection. Sync can be separate Horizontal and Vertical sync (RGB-HV), Composite sync (RGB-S) or Sync signals on green(RGsB). Always use an interface when a comput ...

  • Barco R9001070 - page 51

    Connections Connections 5975696 BARCODATA 2100 140798 7-7 7-7 5975696 BARCODATA 2100 140798 All input signals can be 75 ohm terminated via soft switches (see also Service mode). Connect the possible audio input signals for source 4 to the AUDIO B input when the audio lock is OFF and for source 5 to the AUDIO C input when the audio lock is OFF (see ...

  • Barco R9001070 - page 52

    Connections Connections 7-8 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-8 Connecting a RGB3S Analog Source to Source 4 or 5. Connect your RGB signals with Tri-level sync, e.g. a professional VCR to the RGB input terminals of source 4 or source 5. RGB3S/RG3sB analog : 5 x BNC Red : 0.7 Vpp ± 3 dB Blue : 0.7 Vpp ± 3 dB Green : 0.7 ...

  • Barco R9001070 - page 53

    Connections Connections 5975696 BARCODATA 2100 140798 7-9 7-9 5975696 BARCODATA 2100 140798 Connecting a Computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 Input of the Projector. The BARCODATA 2100 projector has a RS232 port that allows it to communicate with a computer. Applications : remote control and data communications. a) r ...

  • Barco R9001070 - page 54

    Connections Connections 7-10 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 7-10 Connecting a RCVDS 800 or RCVDS 05 to the BARCODATA 2100. - Up to 10 inputs with one RCVDS800 or 20 inputs with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module. - Serial communication with the projector. - Remote control bu ...

  • Barco R9001070 - page 55

    Controlling Controlling 5975696 BARCODATA 2100 140798 8-1 8-1 5975696 BARCODATA 2100 140798 CONTROLLING How to Use the RCU Projector Address How to Display a Projector Address How to Program an Address into the RCU Picture Controls with Direct Access Sound Controls with Direct Access The Pause Key The Mute Key CONTROLLING How to Use the RCU Project ...

  • Barco R9001070 - page 56

    Controlling 8-2 Controlling 8-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 The BARCODATA 2100 can be controlled with a. the RCU b. the hardwired RCU (cable is not included) c. the local keypad. Controlling the projector with the RCU and the hardwired RCU is equal. How to Use the RCU? a) Point the front of the RCU to the reflective ...

  • Barco R9001070 - page 57

    Controlling Controlling 5975696 BARCODATA 2100 140798 8-3 8-3 5975696 BARCODATA 2100 140798 c) Point the front of the RCU directly at one of the IR sensors of the projector. When using the wireless remote control, make sure you are within the effective operating distance (30m (100ft) in a straight line). The remote control unit will not function pr ...

  • Barco R9001070 - page 58

    Controlling 8-4 Controlling 8-4 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 How to Display a Projector Address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds. To continue using the RCU, it is necess ...

  • Barco R9001070 - page 59

    Controlling Controlling 5975696 BARCODATA 2100 140798 8-5 8-5 5975696 BARCODATA 2100 140798 Contrast Control A correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions. Use the + button for a higher contrast. Use the - button for lower contrast. ...

  • Barco R9001070 - page 60

    Controlling 8-6 Controlling 8-6 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Volume Control Volume control adjusts the volume. Use the + button for a higher volume. Use the - button for a lower volume. Bass Control Bass control adjusts the bass level (low tones). Use the + button for more low tones. Use the - button for less low tone ...

  • Barco R9001070 - page 61

    Start Up of the Adjustment Mode 9-1 Start Up of the Adjustment Mode 9-1 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 START UP OF THE ADJUSTMENT MODE START UP OF THE ADJUSTMENT MODE ...

  • Barco R9001070 - page 62

    Start Up of the Adjustment Mode 9-2 Start Up of the Adjustment Mode 9-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Adjustment Mode All source set ups, picture tunings and geometry are made while in the 'Adjustment mode' . Press the ADJUST or ENTER key to enter the 'Adjustment mode'. You are now in the 'Adju ...

  • Barco R9001070 - page 63

    Start Up of the Adjustment Mode 9-3 Start Up of the Adjustment Mode 9-3 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks to enter your password (Password protection is only available when the password strap on the controller module ...

  • Barco R9001070 - page 64

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-1 Random Access Adjustment Mode 10-1 5975696 BARCODATA 2100 140798 RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Audio Tuning Geometry RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Audio Tuning Geometry ...

  • Barco R9001070 - page 65

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-2 10-2 5975696 BARCODATA 2100 140798 Starting Up the Random Access Adjustment Mode Push the control disk up or down to highlight 'Random Access' and then press ENTER . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE S ...

  • Barco R9001070 - page 66

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-3 Random Access Adjustment Mode 10-3 5975696 BARCODATA 2100 140798 File Service Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these f ...

  • Barco R9001070 - page 67

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-4 10-4 5975696 BARCODATA 2100 140798 Load File Push the control disk up or down to select LOAD and press ENTER to display the Load menu. The Load menu displays the corresponding files depending on the installed filter. This filter can be "Fit" or ...

  • Barco R9001070 - page 68

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-5 Random Access Adjustment Mode 10-5 5975696 BARCODATA 2100 140798 Edit File The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult the source specification before entering the data. To start up the EDIT me ...

  • Barco R9001070 - page 69

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-6 10-6 5975696 BARCODATA 2100 140798 a file with LOAD) Active vertical lines Vertical shift in lines Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD) All settings can individually be chang ...

  • Barco R9001070 - page 70

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-7 Random Access Adjustment Mode 10-7 5975696 BARCODATA 2100 140798 How to find the correct values for the displayed item? During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled ...

  • Barco R9001070 - page 71

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-8 10-8 5975696 BARCODATA 2100 140798 Select "Vertical" by pushing the control disk key up or down and press ENTER . The full image is displayed. The "Vertical Total lines" are already filled when an active file is selected to be edited. ...

  • Barco R9001070 - page 72

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-9 Random Access Adjustment Mode 10-9 5975696 BARCODATA 2100 140798 Options Source number : The source number of a non-active source can be changed to any other source number. This makes it possible to create already a file for future source numbers. Clamp pulse width : The width of the ...

  • Barco R9001070 - page 73

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-10 10-10 5975696 BARCODATA 2100 140798 Rename To change the name of a selected file. Use the control disk to select RENAME and press ENTER . The Rename selection menu will be displayed. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS RENAME FILE Filename ...

  • Barco R9001070 - page 74

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-11 Random Access Adjustment Mode 10-11 5975696 BARCODATA 2100 140798 Copy To copy a selected file into a new file. Use the control disk to select COPY and press ENTER . The Copy selection menu will be displayed. Use the control disk to select a file name and press ENTER to select. The C ...

  • Barco R9001070 - page 75

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-12 10-12 5975696 BARCODATA 2100 140798 Delete To delete a selected file out of the list of files. Use the control disk to select DELETE and press ENTER . The delete selection menu will be displayed. DELETE FILE Fi len am e Src Resolution ------------------- ...

  • Barco R9001070 - page 76

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-13 Random Access Adjustment Mode 10-13 5975696 BARCODATA 2100 140798 File Options Use the control disk to select OPTIONS and press ENTER . The option selection menu will be displayed. FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Press ENTER to toggle between [name] and [index] [nam ...

  • Barco R9001070 - page 77

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-14 10-14 5975696 BARCODATA 2100 140798 Sync SLOW/FAST Only active for sources 1, 2 and 3. When not source 1, 2 or 3, the following indication will be given on the menu : Sync (-). Highlight Sync by pushing the control disk up or down and press ENTER to togg ...

  • Barco R9001070 - page 78

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-15 Random Access Adjustment Mode 10-15 5975696 BARCODATA 2100 140798 Color Balance Highlight Color Balance by pushing the control disk up or down and press ENTER to select the color balance selection menu. The next choices are possible : Fixed color balance : - 3200 K (reddish) - 6500 K ...

  • Barco R9001070 - page 79

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-16 10-16 5975696 BARCODATA 2100 140798 Gamma With the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower gamma values) or to reduce the importance of these details (higher gamma values). To change t ...

  • Barco R9001070 - page 80

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-17 Random Access Adjustment Mode 10-17 5975696 BARCODATA 2100 140798 Audio Tuning Highlight Audio Tuning by pushing the control disk up or down and press ENTER to select. The Audio Tuning menu will be displayed. The next items are available : - volume - balance - bass - treble - mute - ...

  • Barco R9001070 - page 81

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-18 10-18 5975696 BARCODATA 2100 140798 ling'. Mute Select 'Mute' to stop the sound reproduction. The image is still displayed. Highlight 'Mute' with the control disk and press ENTER to toggle Select with é o r ê then <ENTER> ...

  • Barco R9001070 - page 82

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-19 Random Access Adjustment Mode 10-19 5975696 BARCODATA 2100 140798 Fade Select Fade by pushing the control disk up or down. The fade can be adjusted between -15 and 15. Fade on -15 : no sound reproduction on the external loudspeakers, max on the internal loudspreaker with the same vol ...

  • Barco R9001070 - page 83

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-20 10-20 5975696 BARCODATA 2100 140798 Geometry Highlight Geometry by pushing the control disk up or down and press ENTER to select the geometry selection menu. The following adjustment are possible : - horizontal and vertical image shift. - horizontal and ...

  • Barco R9001070 - page 84

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-21 Random Access Adjustment Mode 10-21 5975696 BARCODATA 2100 140798 Size Highlight Size by pushing the control disk up or down and press Select with é o r ê then <ENTER> <EXIT> to return. GEOMETRY SHIFT SIZE ZOOM BLANKING SCALE ENTER to select. The size can be adjusted in ...

  • Barco R9001070 - page 85

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-22 10-22 5975696 BARCODATA 2100 140798 Zoom Highlight Zoom by pushing the control disk up or down and press ENTER to select. Push the control disk to the right or forward to zoom in (more detail). Push the control disk to the left or backward to zoom out (l ...

  • Barco R9001070 - page 86

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-23 Random Access Adjustment Mode 10-23 5975696 BARCODATA 2100 140798 Blanking Highlight Blanking by pushing the control disk up or down and press ENTER to select. Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen ...

  • Barco R9001070 - page 87

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-24 10-24 5975696 BARCODATA 2100 140798 BLANKING BLANKING [ON] TOP BOTTOM LEFT RIGHT RESET Select with é o r ê then <ENTER> <EXIT> to return. Adjustment of the blanking on the top of the image Adjustment of the blanking on the bottom of the ima ...

  • Barco R9001070 - page 88

    Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-25 Random Access Adjustment Mode 10-25 5975696 BARCODATA 2100 140798 Scale [1:1] When 'Scale 1:1' is selected, the real input signal without image conversion is displayed on the screen witha resolution of 800 x 600 pixels. Parts of the image cannot be displayed and will be los ...

  • Barco R9001070 - page 89

    Random Access Adjustment Mode Random Access Adjustment Mode 5975696 BARCODATA 2100 140798 10-26 10-26 5975696 BARCODATA 2100 140798 ...

  • Barco R9001070 - page 90

    Installation 11-1 Installation 5975696 BARCODATA 2100 140798 11-1 5975696 BARCODATA 2100 140798 INSTALLATION Configuration Internal Patterns INSTALLATION Configuration Internal Patterns ...

  • Barco R9001070 - page 91

    Installation 11-2 Installation 11-2 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 Starting Up the Installation Mode Push the control disk up or down to highlight Installation and then press ENTER . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Source 01 INSTALLATION CONFIGURATION INTERNAL PATTERNS Selec ...

  • Barco R9001070 - page 92

    Installation 11-3 Installation 5975696 BARCODATA 2100 140798 11-3 5975696 BARCODATA 2100 140798 Configuration Highlight "Configuration" by pushing the control disk up or down and press ENTER to select. For more information, see Projector configuration in chapter Instal- lation Set Up. Select with é o r ê then <ENTER> <EXIT> ...

  • Barco R9001070 - page 93

    Installation 11-4 Installation 11-4 5975696 BARCODATA 2100 140798 5975696 BARCODATA 2100 140798 ...

  • Barco R9001070 - page 94

    Service Mode 5975696 BARCODATA 2100 140798 12-1 Service Mode 5975696 BARCODATA 2100 140798 12-1 SERVICE MODE Identification Change Password Change Projector Address Change Baudrate PC Reset Lamp Run Time Lamp Run Time History Preset Input Balance Change Language I²C Diagnosis 75 W Termination Dimming SERVICE MODE Identification Change Password Cha ...

  • Barco R9001070 - page 95

    Service Mode 12-2 5975696 BARCODATA 2100 140798 Service Mode 12-2 5975696 BARCODATA 2100 140798 Starting Up the Service Mode Push the control disk up or down to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password pr ...

  • Barco R9001070 - page 96

    Service Mode 5975696 BARCODATA 2100 140798 12-3 Service Mode 5975696 BARCODATA 2100 140798 12-3 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY PRESET INPUT BALANCE MORE ... SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... BARCO DATA 2100 Proj. address : ...

  • Barco R9001070 - page 97

    Service Mode 12-4 5975696 BARCODATA 2100 140798 Service Mode 12-4 5975696 BARCODATA 2100 140798 Select with ê o r é then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTIME HISTORY PRESET INPUT BALANCE MORE ... SERVICE CHANGE LANGUAGE 75 W TERMINATION ...

  • Barco R9001070 - page 98

    Service Mode 5975696 BARCODATA 2100 140798 12-5 Service Mode 5975696 BARCODATA 2100 140798 12-5 Identification To display the Identification sreen, push the control disk up or down to highlight Identification and press ENTER to display the Identification screen. The Identification screen gives an overview of : - type of projector - projector addres ...

  • Barco R9001070 - page 99

    Service Mode 12-6 5975696 BARCODATA 2100 140798 Service Mode 12-6 5975696 BARCODATA 2100 140798 - Baud rate : transfer speed for communication with a IBM PC (or compatible) or MAC. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a difference, consult Set up of the baud rate for commu- nicati ...

  • Barco R9001070 - page 100

    Service Mode 5975696 BARCODATA 2100 140798 12-7 Service Mode 5975696 BARCODATA 2100 140798 12-7 How to Change the Password ? Highlight Change password by pushing the control disk up or down and press ENTER to display the Change Password menu. ENTER displays the Change Password menu EXIT returns to the adjustment selection menu. The old password is ...

  • Barco R9001070 - page 101

    Service Mode 12-8 5975696 BARCODATA 2100 140798 Service Mode 12-8 5975696 BARCODATA 2100 140798 Change Projector Address Every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to highlight Change Proj. Address and press ENTER . The Change Pro ...

  • Barco R9001070 - page 102

    Service Mode 5975696 BARCODATA 2100 140798 12-9 Service Mode 5975696 BARCODATA 2100 140798 12-9 The next baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 The actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press ENTER to accept the new baud rate setting. Reset Lamp Run ...

  • Barco R9001070 - page 103

    Service Mode 12-10 5975696 BARCODATA 2100 140798 Service Mode 12-10 5975696 BARCODATA 2100 140798 Lamp Run Time History To get an overview of the different lamp run times, highlight Lamp Run Time History by pushing the control disk up or down and press ENTER . ENTER displays the Lamp Run Time History menu. EXIT returns to the adjustment selection m ...

  • Barco R9001070 - page 104

    Service Mode 5975696 BARCODATA 2100 140798 12-11 Service Mode 5975696 BARCODATA 2100 140798 12-11 Preset Input Balance Highlight the Black Balance by pushing the control disk up or down and press ENTER to select. With the Black Balance adjustment, the black level of the red and blue channels can be adjusted in comparison with the green channel. Use ...

  • Barco R9001070 - page 105

    Service Mode 12-12 5975696 BARCODATA 2100 140798 Service Mode 12-12 5975696 BARCODATA 2100 140798 Change Language Highlight Language by pushing the control disk up or down and press ENTER to select the Language Selection menu. For the moment, only English is available. SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... CHANGE ...

  • Barco R9001070 - page 106

    Service Mode 5975696 BARCODATA 2100 140798 12-13 Service Mode 5975696 BARCODATA 2100 140798 12-13 S e l e ct w it h o r then <ENTER> <EXIT> to return. SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... DIMMING 0 100 50 Dimming (for lamps with order numbers R9829510 and R9829740) Highlights 'Dimming' by p ...

  • Barco R9001070 - page 107

    Service Mode 12-14 5975696 BARCODATA 2100 140798 Service Mode 12-14 5975696 BARCODATA 2100 140798 SERVICE CHANGE LANGUAGE 75 Ω TERMINATION DIMMING I2C DIAGNOSIS MORE ... I2C DIAGNOSIS DCA INPUT ANALOG TDA8444 42H # # # INPUT ANALOG PC F8574A 74H # # # INPUT ANALOG PC F8574A 78H # # # INPUT ANALOG TDA8444 4EH # # # DECODER 40H # # # LA MP DR IVE R ...

  • Barco R9001070 - page 108

    Optional Equipment 5975696 BARCODATA 2100 140798 13-1 Optional Equipment 5975696 BARCODATA 2100 140798 13-1 OPTIONAL EQUIPMENT IR Remote Receiver Hardwired RCU RCVDS800/RCVDS05 VS05 Interfaces Adapter and Communication Cables Ceiling Mount Kit CM50 OPTIONAL EQUIPMENT IR Remote Receiver Hardwired RCU RCVDS800/RCVDS05 VS05 Interfaces Adapter and Comm ...

  • Barco R9001070 - page 109

    Optional Equipment 13-2 5975696 BARCODATA 2100 140798 Optional Equipment 13-2 5975696 BARCODATA 2100 140798 IR Receiver 800 This infra red receiver unit makes it possible to control the BARCODATA 2100 from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS. The control information from the ...

  • Barco R9001070 - page 110

    Optional Equipment 5975696 BARCODATA 2100 140798 13-3 Optional Equipment 5975696 BARCODATA 2100 140798 13-3 RCVDS 800 / RCVDS 05 An optional RCVDS 800 source selector makes it possible to connect up to ten sources to the projector, an optional RCVDS 05 source selector makes it possible to connect up to 20 sources to the projector. When RCVDS's ...

  • Barco R9001070 - page 111

    Optional Equipment 13-4 5975696 BARCODATA 2100 140798 Optional Equipment 13-4 5975696 BARCODATA 2100 140798 Interface Universal Analog Interface Order number : R9826100 RGB 120 MHz Analog Interface Order number : R9826570 VGA interface Order number : R9828070 (230V) R9828079 (120V) MAC interface Order number : R9828050 (230V) R9828059 (120V) Multif ...

  • Barco R9001070 - page 112

    Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-1 Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-1 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z CGA 640 X 200 59,924 15,700 14,318 912 640 262 200 NTSC 675 X 240I 29,970 15,734 13,500 858 720 263 240 PAL 675 X 278I 25,000 15,625 1 ...

  • Barco R9001070 - page 113

    Appendix A : Standard Source Set Up Files A-2 5975696 BARCODATA 2100 140798 Appendix A : Standard Source Set Up Files A-2 5975696 BARCODATA 2100 140798 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z VGA75ISO 640 X 480 75,000 39,375 31,500 800 640 525 480 MAC_2 640 X 480 66,667 35,000 30,240 864 640 525 480 MA C_L C 640 X 480 66,619 ...

  • Barco R9001070 - page 114

    Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-3 Appendix A : Standard Source Set Up Files 5975696 BARCODATA 2100 140798 A-3 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z SG_60_3 960 X 680 60,000 43,200 54,432 1260 960 720 68 0 NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MH z SG_60_3 960 X ...

  • Barco R9001070 - page 115

    Appendix B : Battery Replacement in the RCU 5975696 BARCODATA 2100 140798 B-1 Appendix B : Battery Replacement in the RCU 5975696 BARCODATA 2100 140798 1-1 Battery Replacement in the RCU. Remove the battery cover on he backside of the remote control by pushing the indicated handle a little to the bottom of the RCU. Lift up the top side of the cover ...

  • Barco R9001070 - page 116

    Appendix C : Focusing the Lens 5975696 BARCODATA 2100 140798 C-1 Appendix C : Focusing the Lens 5975696 BARCODATA 2100 140798 C-1 Focusing the Lens Loosen the fastener ring of the lens by turning counter clock- wise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will ...

  • Barco R9001070 - page 117

    Appendix D : Lens Cleaning Procedure 5975696 BARCODATA 2100 140798 D-1 Appendix D : Lens Cleaning Procedure 5975696 BARCODATA 2100 140798 D-1 Lens Cleaning Procedure Cleaning procedure for the SD lens To minimize the possibility of damaging the optical coating or scratch- ing exposed lens surfaces, we have developed recommendations for cleaning len ...

  • Barco R9001070 - page 118

    Appendix E : Source Number 90 - 99 5975696 BARCODATA 2100 140798 E-1 Appendix E : Source Number 90 - 99 5975696 BARCODATA 2100 140798 E-1 Source Numbers 90 - 99 These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 800 or RCVDS 05 or VS05. An additional adjustment file can be cr ...

  • Barco R9001070 - page 119

    Appendix F : Lenses 5975696 BARCODATA 2100 140798 A-1 Appendix F : Lenses 5975696 BARCODATA 2100 140798 A-1 Lenses This APPENDIX gives an overview of the table and formula for the available lenses for the BARCODATA 2100. An overview of all tables, diagrams and formulas can also be found in the manual "Installation diagrams for BARCO projectors ...

  • Barco R9001070 - page 120

    Appendix F : Lenses A-2 5975696 BARCODATA 2100 140798 Appendix F : Lenses A-2 5975696 BARCODATA 2100 140798 Lens formulas to calculate the projector distance. SD(1. 15:1) Metric PD= 1.079 x SW + 0.2929 Inch PD= 1.079 x SW + 11.53 SD(1 .2:1) Metric PD= 1.135 x SW + 0.334 Inch PD= 1.135 x SW +13.15 SD(1. 7:1) Metric PD= 1.4304 x SW + 0.4908 Inch PD= ...

  • Barco R9001070 - page 121

    Insert card RCU 5975696 BARCODATA 2100 140798 Insert card RCU 5975696 BARCODATA 2100 140798 " " ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco R9001070 can be divided into several groups. They are, among others:
- Barco technical drawings
- R9001070 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco R9001070
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco R9001070.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco R9001070, service manual, brief instructions and user manuals Barco R9001070. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco R9001070.

Similar manuals

A complete manual for the device Barco R9001070, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco R9001070 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco R9001070.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco R9001070 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco R9001070, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco R9001070, that we can find in the current document
3. Tips how to use the basic functions of the device Barco R9001070 - which should help us in our first steps of using Barco R9001070
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco R9001070
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco R9001070 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco R9001070?

Use the form below

If you did not solve your problem by using a manual Barco R9001070, ask a question using the form below. If a user had a similar problem with Barco R9001070 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)