Manual Aastra Telecom DT390

91 pages 0.82 mb
Download

Go to site of 91

Summary
  • Aastra Telecom DT390 - page 1

    1424_EN_LZT10 3087.doc Rev B2 2009-09-11 DT390 Cordless Phone for MX-ONE™ User Guide ...

  • Aastra Telecom DT390 - page 2

    DT390 Cordless Phone for MX-ONE™ Copyright © Copyright Aastra Telecom Sweden, 2009. All rights reserved. Disclaimer No part of this material may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due t o continued progress in methodology, design an ...

  • Aastra Telecom DT390 - page 3

    DT390 Cordless Phone for MX-ONE™ Contents 1 Welcome ................................................................................................. 9 2 Important User Information .................................................................. 9 2.1 Safety Instructions .......................................................................... ...

  • Aastra Telecom DT390 - page 4

    DT390 Cordless Phone for MX-ONE™ 6.1.4 Rejecct a call ......................................................................................... 33 6.1.5 End the call ............................................................................................ 34 6.2 Parallel Ringing ................................................................. ...

  • Aastra Telecom DT390 - page 5

    DT390 Cordless Phone for MX-ONE™ 9.8.1 Resume a Call ....................................................................................... 51 9.8.2 Resume on Another Extension .............................................................. 52 9.9 Call Waiting ....................................................................................... ...

  • Aastra Telecom DT390 - page 6

    DT390 Cordless Phone for MX-ONE™ 14.3 Night Service ......................................................................................... 69 14.4 Emergency Mode .................................................................................. 69 14.5 Malicious Call Tracing ..................................................................... ...

  • Aastra Telecom DT390 - page 7

    DT390 Cordless Phone for MX-ONE™ 1424_EN_LZT103087.doc Rev B2 2009-09-11 © Cop yright Aastra Telecom Sweden, 2009. All rights reserved. VII 17 Troubleshooting .................................................................................. 86 18 Glossary .......................................................................................... ...

  • Aastra Telecom DT390 - page 8

    ...

  • Aastra Telecom DT390 - page 9

    1 We l c o m e Welcome to the user guide for the DT390 cordless phone. This guide describes the available features of the phone when it is connected to MX- ONE™. The phone is designed to be used in a medium demanding environment, such as hospital envir onment, light industry environment, and office environment. Depending on the version and config ...

  • Aastra Telecom DT390 - page 10

    However, there is no guarantee that interference will not occur in a particular installation. If this equipm ent does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorie ...

  • Aastra Telecom DT390 - page 11

    will disable alarm equipment, consult your telephone company or qualified installer. Electrical Safety Advisory Electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. Customer is thus recommended to use a surge arrestor for the equipment that requires AC power. 2.1 Safet ...

  • Aastra Telecom DT390 - page 12

    • To avoid hearing impairment, accept the call before holding your product (or portable handsfree device) to your ear. Warning! The handset may retain small magnetic objects around the mouthcap or earcap region. Please check and remove before use. 2.1.2 Disposal of the product Your product should not be placed in municipal waste. Please check loc ...

  • Aastra Telecom DT390 - page 13

    Single chargers shall only be connected with power adapters supplied by the manufacturer, see list above. Precautions: Please read carefully the following important precautions before the first time use of the batteries. Make sure to understand and observe all cautionary instructions stated, so as to avoid any possible safety hazards that are cause ...

  • Aastra Telecom DT390 - page 14

    • Do not cover the product while being charged. Do not charge the phone in a closed cabinet or drawer. The charging of the battery is a chemical process and causes the battery to become warm during charging. Make sure the environment in which the phone is charged, is well vented. • The cordless phone can be charged either when switched on or of ...

  • Aastra Telecom DT390 - page 15

    • Moving the equipment rapidly between warm and cold temperatures may cause condensation (water droplets) to form on its internal and external surfaces. Water droplets may cause malfunction of the equipment and corrupt or end communication or damage the equipment. When condensation is noticed, stop using the equipment. Switch off the phone, remov ...

  • Aastra Telecom DT390 - page 16

    2.5 Software V ersion To view the phone’s software version: 1. Enter *#34# in idle mode mode. 2. Select Software . 2.6 Accessibility and V oice Quality The base network is not always available. If you do not get in contact with your system, contact your system administrator. For best voice quality, avoid positioning near computer, radio or simila ...

  • Aastra Telecom DT390 - page 17

    3 Description This section describes the DT390 cordless phone and its display information, menu structure, and tones. A picture of the phone is shown in Figure 1 . Figure 1 Overview of the DT390 Cordless Phone 1. Soft keys Used with Graphical User Interface. 2. Off-hook key To connect calls, and as a short cut to the Call list. 3. Voice mail access ...

  • Aastra Telecom DT390 - page 18

    7. Navigation key Navigation key with left, right, up and down. 8. On-hook key and power on and off Combined button; to end a call, to return to idle mode, and to switch the handset on and off by long press. 9. Color display The full graphic type display is 112 pixels wide and 115 pixels high. The display is monochrome black and white, with back li ...

  • Aastra Telecom DT390 - page 19

    Table 2 Accessories Desk Charger Desk PDM Charger Rack PDM Charger Carry Case Standard Clip Security (swivel) Clip Security chain Headset with microphone on boom Headset with microphone on cable Case The plastic cover parts are made of durable PC/ABS material. Antenna The antenna is integrated inside the phone. Loudspeaker The cordless phone has a ...

  • Aastra Telecom DT390 - page 20

    3.2 Display Information The icons and text in the display indicate functions and settings available to the user. The display gives visual feedback on all actions performed, and also textual warnings, see Figure 2. The owner ID can manually be set by the user. Note: If a name is available it is displayed instead of, or together with, the number. Fig ...

  • Aastra Telecom DT390 - page 21

    Depending on the state and setting of your phone, different information can be shown, see the following list: • Idle phone o Normal. The display shows the programmed name of your network, your name and extension number, time, date, and so on, see Figure 2. o Follow-me activated. The display shows your own extension number followed by a > and t ...

  • Aastra Telecom DT390 - page 22

    No access Access Indication Your phone has contact with a system, calling is not allowed. No Subscription System Indication The phone is not in contact with any system. Please ask your system administrator to log on the phone. (1) When reentering the co verage area it can take a couple of minutes before the phone automatically has registered into t ...

  • Aastra Telecom DT390 - page 23

    Voice mail message Displayed in the header bar when there are voice mails. The icon remains until voice mail has been listened to. Keys locked Indicates a locked keypad. Phone locked Indicates a locked phone. Headset Indicates that a corded headset is connected to the phone. Microphone off Indicates a silenced microphone. It is displayed after a lo ...

  • Aastra Telecom DT390 - page 24

    Calls Contains call lists, call time, and call services (2) . Settings Contains personal phone settings such as chan ging the ringer volume, selecting language, and so on. (1) Company p hon ebook and central pho neb ook are system dependent and config ured by system administrator. (2) Call services are configured by the syst em administrator from t ...

  • Aastra Telecom DT390 - page 25

    Figure 5 Calls structure Note: Call services functions are system dependent. Parameters are set up in the CPDM or WinPDM. Contac t your system administrator. 1424_EN_LZT103087.doc Rev B2 2009-09-11 © Cop yright Aastra Telecom Sweden, 2009. All rights reserved. 25 ...

  • Aastra Telecom DT390 - page 26

    3.3.2 Contacts Tab An overview of the Contacts tab is presented in Figure 6 . Figure 6 Contacts structure 1424_EN_LZT103087.doc Rev B2 2009-09-11 © Cop yright Aastra Telecom Sweden, 2009. All rights reserved. 26 ...

  • Aastra Telecom DT390 - page 27

    3.3.3 Settings Tab An overview of the Connection tab is presented in Figure 7 . Figure 7 Settings structure 1424_EN_LZT103087.doc Rev B2 2009-09-11 © Cop yright Aastra Telecom Sweden, 2009. All rights reserved. 27 ...

  • Aastra Telecom DT390 - page 28

    3.3.4 In Call Functions from the In call menu , see overview in Figure 8 , are reached during a call from the soft key More . Note: The displayed options when pressing More are programmed from the WinPDM or CPDM. Please cont act your system administrator. Figure 8 In call 1424_EN_LZT103087.doc Rev B2 2009-09-11 © Cop yright Aastra Telecom Sweden, ...

  • Aastra Telecom DT390 - page 29

    3.4 T ones The following different tones are sent from the exchange to your phone. 3.5 Indicators 3.5.1 Phone Indicator The following indications are used: Table 3 Cordless Phone Indicator Indicator Description Orange, fixed (phone placed in charger) Battery is being charged. Green, fixed (phone placed in charger) Battery is fully charged. Red, fix ...

  • Aastra Telecom DT390 - page 30

    Table 4 Desk PDm Charger Indicator Indicator Description None Not connected to power. Green, fixed Logged on to CPDM or WinPDM. Orange, fixed Not logged on to CPDM or WinPDM. Orange, flashing (1000 ms on, 1000 ms off) • Software download • File transfer during Easy Replacement Orange, flashing (100 ms on, 800 ms off) “ Change phone ” indica ...

  • Aastra Telecom DT390 - page 31

    4 Switching On and Of f In this section, switching on and off th e phone is described. Note: If the message No System is displayed you cannot make or answer calls. Depending on system programming, your phone can be automatically locked. To unlock the phone, enter your four-digit code (factory default is “0000”). 4.1 Switching on To switch on th ...

  • Aastra Telecom DT390 - page 32

    5.1 Logging on To log on, do the following: 1. Press *11*. 2. Enter the Authorization Code and press *. 3. Enter your extension number, press # and then . Wait for the call timer to start in the display. 4. Press to finish the procedure. The display shows your phone number. 5.2 Logging of f To log off, do the following: 1. Press #11# and press . Wa ...

  • Aastra Telecom DT390 - page 33

    8. Press the answering button on the headset. Note: Calls can be answered at any time even during programming, or while keying in a number. When the phone is in idle mode, you can change the answering method, see Section 15.6. Other answering methods; Automatically or Loudspeaking, can be set from the Settings tab, see Section 15. When automatic an ...

  • Aastra Telecom DT390 - page 34

    6.1.5 End the call To end a call: • Press .The display shows the duration of the call. The total t ime of the call can also be retrieved from the calls tab 6.2 Parallel Ringing Parallel ringing makes it possible for an incoming call to rin g several phones simultaneously and for the call to be answered on any of the phones. The main advantage of ...

  • Aastra Telecom DT390 - page 35

    1. Press #21# and . Wait for the call timer to start in the display. Note: U.K., press #2#. 2. Press to finish the procedure. Note: If you want to restore parallel ringing for all phones defined in the list, follow the procedure for restoring the function from the phone with the main extension number and enter the number of the answering position. ...

  • Aastra Telecom DT390 - page 36

    7.1.1 Dialing a Number from the Call List The 25 last received, dialed and missed phone numbers are stored in the call list. If Clock and Date function is set, it is possible to see the time for the calls made or received that day. The following day, the time stamp is changed to a date stamp. For more information on time and date settings, see Sect ...

  • Aastra Telecom DT390 - page 37

    1. Press . 2. You are connected to the call via the loudspeake r and microphone. 7.3 End the call To end a call, do the following: • Press . The display shows the duration of the call. The total time of the call can also be retrieved from the Calls menu. 7.4 Number Presentation Restriction Note: This function can be blocked for use on your extens ...

  • Aastra Telecom DT390 - page 38

    • Callback • Activate Call Waiting • Intrusion on a busy extension Note: These functions need to be programmed via the WinPDM or CPDM. Please contact your system administrator. 7.6.1 Callback During an outbound call, the soft key More is displayed, leading to the In call menu. To initiate callback, when a called extension is b usy or there is ...

  • Aastra Telecom DT390 - page 39

    3. Press . The system calls the external number. Note: Only one callback can be activated on a busy external line. 7.6.2 Cancel any single Callback To cancel a callback, do the following: 1. Press #37* and enter the extension number. (To cancel a sin gle callback on a specific external line, dial the digit or digits to get a line instead of the ext ...

  • Aastra Telecom DT390 - page 40

    4. When the called extension or the external line becomes free, it will be called automatically. Note: If Call Waiting is not programmed and shown when pressing More, you can press 5 to activate. France and New Zealand, press 6; Sweden, press 4. 7.6.5 Intrusion on a busy extension Note: The warning tone might be disabled for your system, and the In ...

  • Aastra Telecom DT390 - page 41

    1. Dial the common Speed Dialing number. Please refer to your phone directory. 2. Press to make the call. 7.9 Authority There are two types of authorization codes, common and individual, presented in the following sections. 7.9.1 Authorization Code, common If you are assigned to use a common Authorization Code (1 to 7 digits) you can temporarily ch ...

  • Aastra Telecom DT390 - page 42

    3. Press to finish the procedure. 7.9.2 Individual authorization code If you are assigned to an individual Authorization Code (1 to 7 digits, assigned to your own extension) you can lock your own extension to a common authority level, for example when out of the office. You can also temporarily change any other used phone within the exchange to the ...

  • Aastra Telecom DT390 - page 43

    4. Dial the digit or digits to get an external line and the external number. To change your individual Authorization Code, do the following: 1. Press *74*. 2. Enter old Authorization Code and press *. 3. Enter new Authorization Code and press # and . 4. Press to finish the procedure. 8 Contact s The phone is equipped with the following phonebooks: ...

  • Aastra Telecom DT390 - page 44

    2. Select Call contact, and press Select . A name list is shown. 3. Select the a contact from the list, or search a name or number by enter characters in the Search field. 4. Press or Call. 8.2 Dialing a Contact from Comp any Phonebook To dial a contact from the company phonebook, do the following: 1. Press Menu, select Contacts, and pr ess Select. ...

  • Aastra Telecom DT390 - page 45

    8.3.2 Search by Name To search for a contact by name in the central phonebook, do the following: 1. Press Menu, select Contacts, and pr ess Select. 2. Select Central phonebook, and press Select. 3. Select Search by name, and press Select. 4. Enter the first or last name and press Search. A message box saying Searching is displayed. 5. Press Call or ...

  • Aastra Telecom DT390 - page 46

    b. Mark Name, Work number, Mobile number, or Other number, and press Add. c. Enter number and press OK. d. Press Save. If From call list is chosen: a. Navigate to the desired number in the call list and press Add . b. Mark Work number, Mobile number or Other number, and press Select. c. Mark Name and press Add. d. Enter the name of the contact and ...

  • Aastra Telecom DT390 - page 47

    OR • Enter the first character(s) in the name and press Search. 3. Press Delete and select Yes to delet e the entry. 8.7 W rite T ext and Numbers This section explains how to write text and numbers, useful when adding a new entry in the phonebook. For example, to add Smith in the phonebook, do the following: 1. Press 7777 for S. The marked charac ...

  • Aastra Telecom DT390 - page 48

    Figure 9 Available characters Note: Depending on the selected menu language, other characters can be available. This means that the character order can differ from the figure above. 9 During Calls What can be done during a call is described in th is section, for example volume control, muting the microphone, and functions such as call forwarding, c ...

  • Aastra Telecom DT390 - page 49

    2. is displayed. This means that the other part in an ongoing call with you will not here you. To switch the microphone back on, do the following: 1. Press More, select Microphone on, and press Select. It is also possible to switch on and off the microphone during a call by pressing and holding . Note: It is advised to use this feature inste ad of ...

  • Aastra Telecom DT390 - page 50

    3. Do one of the following: • Enter the third party's phone number and press . OR • Press the soft key, select a contact, press Select, and then press Call. Note: It is only possible to select a contact from the local and company phonebook, but not from the central phonebook, when making an inquiry. When the third party answers, it is poss ...

  • Aastra Telecom DT390 - page 51

    2. Dial the third party and press . You can dial the number, or use the phonebook or the call list to make the call. 3. Press More, select Transfer, and pr ess Select. The ongoing call is transferred. Note: If Transfer does not show when pressing More, you can also do the following to transfer a call: Press R, dial the third party, and press before ...

  • Aastra Telecom DT390 - page 52

    9.8.2 Resume on Another Extension To resume the call on another extension: 1. Call the extension where the call was put on hold and press . 2. Press 8. Note: France and New Zealand, press 4; Sweden, press 6. 9.9 Call W aiting Note: The call waiting function might be blocked for use on your extension. This needs to be configured in the WinPDM or CPD ...

  • Aastra Telecom DT390 - page 53

    Note: This feature needs to be configured in the WinPDM or CPDM by your system administrator. When having an ongoing conversation and wanting to establish a phone conference, do the following: 1. Press More, mark New Call, and press Select. This will put the first call on hold. 2. Dial the number, and press . When the third party has answered, cont ...

  • Aastra Telecom DT390 - page 54

    10.1 Diversion from Call Services Menu All calls to your extension can be diverted to an internal or external answering position of your choice. All calls, that is, calls when busy or calls at no answer, can be diverted to other phone numbers. Note: This feature needs to be programmed in the WinPDM or CPDM. Please contact your system administrator. ...

  • Aastra Telecom DT390 - page 55

    10.2 Internal Follow-me All calls to your extension are dive rted to an extension of your choice (within the private network). During Follow-me, the display shows a > after your number. On the next row, the answering position number is shown. A special dial tone will be heard. Your phone can still be used fo r outgoing calls. Also see Section 10 ...

  • Aastra Telecom DT390 - page 56

    2. Press to finish the procedure. To cancel follow-me remotely: 1. Press #21* diverted extension number # and press . Note: U.K., press #2*. 2. Press to finish the procedure. 10.3 External Follow-me If external follow-me is allowed, calls to your extension can be diverted to an external number of your choice. During follow-me, the display shows a&g ...

  • Aastra Telecom DT390 - page 57

    10.4 Personal Number With this feature you can be reached on your office phone number even if when out of the office. Depending on the functionality of your office exchange, you can have either one individual single search profile (standard) or choose between five individual search profiles ( optional). A search profile can be designed to fit the s ...

  • Aastra Telecom DT390 - page 58

    3. Press to finish the procedure. 10.4.3 Activating or Changing to Anothe r Profile from an External Phone To be able to use this function, the external phone must be of push button type and provided with the following keys # and *, or a mobile phone adapted for dial tone pulses (DTMF). To from an external phone, do the following: 1. Call the DISA ...

  • Aastra Telecom DT390 - page 59

    5. Press #10*. 6. Dial your own extension number and press #. 7. Replace the handset. 10.4.5 Designing and Ordering Search Profiles The search profiles are installed or changed by your system administrator. To set up your profiles, copy the setting forms below (Table 7, Table 8, Table 9, Table 10 and Table 11), fill in your new or changed profiles ...

  • Aastra Telecom DT390 - page 60

    2 Cordless 5234 15 Table 6 Profile 2 –At home Search order Type of phone or Answering position Phone number Ring time (seconds) 1 External 222222 20 2 Mobile 0706666666 20 10.5 Setting form for search profiles Fill in your: • Name: _____________________________________ • Department: _________________________________ • Phone Number: ________ ...

  • Aastra Telecom DT390 - page 61

    Table 8 Profile 2 – ____________ Search order Type of phone or Answering position 1) Phone number Ring time (seconds) 1 2 3 (1) Can be, for example, Desk, Co rd less, Mobile, External, Voice Mail, Operator, and so on. Table 9 Profile 3 – ____________ Search order Type of phone or Answering position 1) Phone number Ring time (seconds) 1 2 3 (1) ...

  • Aastra Telecom DT390 - page 62

    3 (1) Can be, for example, Desk, Co rd less, Mobile, External, Voice Mail, Operator, and so on. 11 Messages When receiving a message, the indicator starts flashing, accompanied by a message tone or beep or vibrating alert. If a message is received during a call, a beep notifies the user. The voice mail icon together with a popup message are shown i ...

  • Aastra Telecom DT390 - page 63

    11.1.3 Cancel Manual Message Waiting to Another Extension To cancel manual message waiting, do the following: 1. Press #31* and enter the extension number. Note: North America, press #56*. 2. Press # and . Wait for the call timer to start in the display. 3. Press to finish the procedure. 11.2 V oice Mail (optional) The voice mail application allows ...

  • Aastra Telecom DT390 - page 64

    • Press Call from the popup message. OR • Press and hold 1, when in idle mode. In case the following message pops up: Voice mail number not defined, the voice mail number needs to be configured to the voice mail button. Contact your system administrator. 12 Absence Information (Optional) Absence information is used to inform callers why you are ...

  • Aastra Telecom DT390 - page 65

    12.2 Cancel To cancel absence information, do the following: 1. Press Menu, select Calls, and press Select. 2. Select Call services, and press Select. 3. Select Absence and pre ss Select. 4. Select Deactivate and press Select. The phone calls up the system. Wait for the call timer to start in the display. 5. Press to finish the procedure. The progr ...

  • Aastra Telecom DT390 - page 66

    2. Dial the extension number, press # and . Wait for the call timer to start in the display. Note: If the special dial tone is received, the Authorization Code for the other extension is required. Add the code and press # before pressing . 3. Press to finish the procedure. 13 Group Features The group features available for this cordless phone are p ...

  • Aastra Telecom DT390 - page 67

    13.3.1 Leaving the Group Temporarily To leave the group temporarily, do the following: 1. Press *21* and enter your own extension number. Note: U.K., press *2* and then extension number. 2. Press # and . Wait for the call timer to start in the display. 3. Press to finish the procedure. 13.3.2 Reentering the Group To reenter the hunting group, do th ...

  • Aastra Telecom DT390 - page 68

    14 Other Useful Features In this section, other useful features with the cordless phone and MX-ONE are presented. 14.1 Account Code The Account Code function is used to charge a call to an account number or to prevent unauthorized calls from your phone. The Account Code can have 1 to15 digits. To enable this function, do the following: 1. Press *61 ...

  • Aastra Telecom DT390 - page 69

    14.2 General Deactivation The following features can be simultaneously cancelled: • Callback (all Callbacks are cancelled). • Internal and External Follow-me. 14.2.1 Order To order general deactivation, do the following: 1. Press #001# and press . Wait for the call timer to start in the display. Note: North America, press #0#.. 2. Press to fini ...

  • Aastra Telecom DT390 - page 70

    14.5 Malicious Call T racing If being disturbed by bothersome or malicious external incoming calls, it is possible to request number tracing from the network provider. Tracing can be invoked during or after an ongoing conversation. The external line can be held for a limited period of time. 14.5.1 Order To order call tracing during an ongoi ng conv ...

  • Aastra Telecom DT390 - page 71

    14.6.2 With Individual Authorization Code When using an individual authorization code, do the following: 1. Call the DISA function at your office. Wait for dial tone. 2. Press *75*. Note: Germany, The Netherlands, and Sweden, press *75*; North America, press *6* 3. Dial the Authorization Code and press *. 4. Dial your own extension number and press ...

  • Aastra Telecom DT390 - page 72

    2. Select Sound & Alerts, and press Select. 3. Select Ring Signals, and press Select. Different signals for internal calls, external calls and call ba ck can be set. 4. Select Internal call, Ext ernal call or Callback, and press Select. 5. Select a ring signal, pres s Select, and press Back to save the setting. 15.1.3 Switching Vibrator On and ...

  • Aastra Telecom DT390 - page 73

    2. Select Mic on boom or Mic on cable, and press Select. If the preconfigured headset profiles do not match the headset in use, or the audio performance is bad, it is possible to configure an own headset profile. This is done in WinPDM or CPDM, please contact your system administrator. 15.2 Display Display settings concern brightness and screen sav ...

  • Aastra Telecom DT390 - page 74

    15.3.2 Setting Date Format To set the date, do the following: 1. Press Menu, select Settings, and press Select. 2. Select Time & Date, and press Select. 3. Select Date format, and press Select. The formats to select from are the following: • DD/MM/YYYY. (That is, 17/09/2007 (also called Europe)). • MM/ DD/YYYY. (That is, 09/17/2007 (also ca ...

  • Aastra Telecom DT390 - page 75

    Note: It is possible to answer or reject incoming calls while the keypad is locked. If configured in the WinPDM or CPDM, it is also possible to make an emergency call while the keypad is locked. 15.4.2 Activating Manual Key Lock It is recommended to always have the automatic lock on, but it is possible to manually lock and unlock the keypad as well ...

  • Aastra Telecom DT390 - page 76

    When the phone is locked, is show n in the display. Note: If configured in the WinPDM or CPDM, it is also possible to make an emergency call while the phone is locked. If PIN code is lost it is possible to configure a new, or to do a factory reset in WinPDM or CPDM, contact your system administrator. 15.4.4 Deactivating Phone Lock To deactivate the ...

  • Aastra Telecom DT390 - page 77

    2. Mark Owner ID, and press Select. 3. Enter a name and press Save to save the setting. 15.6 Changing Answering Method The phone can be set to answer a call automatically when a headset is used, or to answer a call by a press on any key. You can also change the answering behavior to: • Use Loudspeaking function directly when is pressed. • Autom ...

  • Aastra Telecom DT390 - page 78

    To remove the setting, press Change. Note: You can also set the answering behavior to automatically connect incoming call in loudspeaker, see Section 15.6. 3. 15.6.3 Loudspeaking (Handsfree) To use Loudspeaking directly when pressing do the following: 1. Press Menu, select Settings, and press Select. 2. Mark Answering, and press Select. 3. Mark Ans ...

  • Aastra Telecom DT390 - page 79

    15.8 Connections Your DT390 cordless phone supports GAP standard. This makes it possible to log on to any GAP compatible system with your phone. Only available systems are displayed. 15.8.1 System To select a system, do the following: 1. Press Menu, select Connections, an d press Select. 2. Select System, and press Select. 3. Select Change system, ...

  • Aastra Telecom DT390 - page 80

    5. Press Next. 6. Enter the PARK code. 7. Enter the AC code and press Next. Protection on? is displayed. 8. Select Yes, if the new system is to be protected, or No if the new system is not to be protected. Note: It is not possible to delete a protected subscrip tion. 9. Press OK. A searching mode starts. 15.8.1.3 Unsubscribe System To unsubscribe f ...

  • Aastra Telecom DT390 - page 81

    15.8.2.1 Redirecting Calls and Messages when Placed in Charger To divert calls or messages when the phone is placed in the charger, do the following: 1. Press Menu, select Settings, and press Select. 2. Select In charger, and press Select. 3. Select Redirect, and press Select. 4. Press Back to save the setting. 15.8.2.2 Detach from Sy stem while Ch ...

  • Aastra Telecom DT390 - page 82

    16.2 Replacing the Battery If the standby time for the cordless phone becomes too low, replace the battery with a new one. Contact your sy stem administrator or your certified Aastra Sales partner for information on new batteries. The battery is connected to the cordless phone in such a way that no miss- contact is possible. To replace the battery, ...

  • Aastra Telecom DT390 - page 83

    16.4 Desk PDM Charger The Desk PDM charger is used for charging, but can also be used for software download, and synchronizing of parameters. The charger is delivered with a plug-in power supply and is connected into an ordinary wall socket. Figure 12 Desk PDM Charger Note: Only use the charger within the temperature range of 5 - 40º C. Using the ...

  • Aastra Telecom DT390 - page 84

    16.7 Belt Clip With the clip on the back of the phone you can fasten the phone to a belt or similar. To attach or remove the clip: spread the clip sligh tly. The ends of the clip fit into holes on the side of your phone. 16.7.1 Attaching Standard Clip Attach the standard clip as describe d in Figure 14. Figure 14 Click on the clip 16.7.2 Attaching ...

  • Aastra Telecom DT390 - page 85

    WinPDM is used together with the Desk PDM charger. The Desk PDM charger is connected to the PC with WinPDM software through the network or USB connectors at the back of the charger, see Figure 16. Figure 16 Desk PDM Charger connected to a PC through USB Connector For more information on WinPDM and CPDM or upgrading of your cordless phone, contact y ...

  • Aastra Telecom DT390 - page 86

    17 T roubleshooting This section contains information on how to solve common operational problems, see Table 12, and warnings, see Table 13, you may receive. Go through the following lists if you encounter any problems. If the checklists do not solve the problem, contact your system administrator. If others have similar problems, there may be a sys ...

  • Aastra Telecom DT390 - page 87

    No system The phone beeps once a minute (during max 30 minutes) with a low tone followed by a high tone (if enabled, the vibrator also follows the beeps). The phone is out of coverage or phone is defective. Stop the beep with the Sound off key and go into range, or contact system administrator. (When reentering the coverage area it can take a coupl ...

  • Aastra Telecom DT390 - page 88

    18 Glossary AC Authentication code. Abbreviated number Short numb er. Initiating a call to a preprogrammed number by dialing a code or pressing a key. Conference If you have an ongoing conversation you can include other persons and esta blish a phone conference. CPDM Centralized Portable Device Manager: A system version with more features than the ...

  • Aastra Telecom DT390 - page 89

    IP call Internal call sent through an internal data network (LAN or WAN). IPEI International Portable part Equipment Identity, unique identity assigned to your phone by the manufacturer. IPDI The unique global GAP identity number for the DECT registration. IPDI is exchanged between handsets during Easy replacement procedure. ISDN Integrated Service ...

  • Aastra Telecom DT390 - page 90

    19 T elephony Function Codes This section describes the country specific function codes used in MX- ONE that are relevant for the DT390 cordless phone. The codes are listed in Table 14. The following application systems are concerned: Australia, Austria, Belgium, Brazil, China, Denmark, Export, Finland, France, Germany, Hong Kong A-law, Hong Kong M ...

  • Aastra Telecom DT390 - page 91

    1424_EN_LZT103087.doc Rev B2 2009-09-11 © Cop yright Aastra Telecom Sweden, 2009. All rights reserved. 91 Ordering or Cancellation of Interception Message 23 North America: 24 Print Interception Message 26 Sweden: N/A Manual Message Waiting 31 Cancellation of Message Waiting 31 North America: 56 Automatic Call Back, Cancellation 37 North America: ...

Manufacturer Aastra Telecom Category Cordless Telephone

Documents that we receive from a manufacturer of a Aastra Telecom DT390 can be divided into several groups. They are, among others:
- Aastra Telecom technical drawings
- DT390 manuals
- Aastra Telecom product data sheets
- information booklets
- or energy labels Aastra Telecom DT390
All of them are important, but the most important information from the point of view of use of the device are in the user manual Aastra Telecom DT390.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Aastra Telecom DT390, service manual, brief instructions and user manuals Aastra Telecom DT390. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Aastra Telecom DT390.

A complete manual for the device Aastra Telecom DT390, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Aastra Telecom DT390 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Aastra Telecom DT390.

A complete Aastra Telecom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Aastra Telecom DT390 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Aastra Telecom DT390, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Aastra Telecom DT390, that we can find in the current document
3. Tips how to use the basic functions of the device Aastra Telecom DT390 - which should help us in our first steps of using Aastra Telecom DT390
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Aastra Telecom DT390
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Aastra Telecom DT390 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Aastra Telecom DT390?

Use the form below

If you did not solve your problem by using a manual Aastra Telecom DT390, ask a question using the form below. If a user had a similar problem with Aastra Telecom DT390 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)