English dropdown-ico

Manual Cisco Systems WIP300

90 pages 2.3 mb
Download

Go to site of 90

Summary
  • Cisco Systems WIP300 - page 1

    User Guide Model No . WIP300 IP Phone Wir eless- G Voi ce ...

  • Cisco Systems WIP300 - page 2

    ...

  • Cisco Systems WIP300 - page 3

    Wireless-G IP Phone Copyright and T r ademarks Specifications are subject to change withou t notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/ or its affiliates in the U .S. and certain other countries. Copyright © 2006 Ci sco Systems, Inc . All rights reserved. Othe r brands and product names are trademark s or re ...

  • Cisco Systems WIP300 - page 4

    Wireless-G IP Phone Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in This User Guide? 2 Chapter 2: Getting to Kn ow the Wireless-G IP Phone 5 The Bottom Panel 5 The Front Panel 6 The Side Panel 7 The Back Panel 8 Chapter 3: Installing and Us ing the Wireless-G IP Phone 9 Overview 9 Charging the IP Phone’s Battery 10 Setting up th ...

  • Cisco Systems WIP300 - page 5

    Wireless-G IP Phone Profile Password 32 Secure Setup 33 Settings 33 Language 33 Clock 34 Alarm Clock 34 Call Settings 35 cSpeed Dial 35 Sound Settings 36 Display Settings 36 Keypad 37 Tools 38 Chapter 5: Using the Web-based Utility 39 Overview 39 How to Access the We b-based Utility 39 Phonebook 41 E-mail 42 Network Prof ile 43 SIP 44 Settings 45 S ...

  • Cisco Systems WIP300 - page 6

    Wireless-G IP Phone Appendix B: Glossary 57 Appendix C: Specifications 61 Appendix D: Warranty Information 63 Appendix E: Regulatory Information 65 Appendix F: Contact Information 79 ...

  • Cisco Systems WIP300 - page 7

    Wireless-G IP Phone List of Figures Figure 2-1: Bottom Panel 3 Figure 2-2: Front Panel 4 Figure 2-3: Side Panel 5 Figure 2-4: Back Panel 6 Figure 3-1: Press the Button 7 Figure 3-2: Insert the Battery 7 Figure 3-3: Connect the Power 8 Figure 3-4: Front Panel 9 Figure 3-5: Scan for Wireless Networks 10 Figure 3-6: Select Wireless Network 10 Figure 3 ...

  • Cisco Systems WIP300 - page 8

    Wireless-G IP Phone Figure 4-15: Forwarding 31 Figure 4-16: Enter Phone Number 31 Figure 4-17: Select Network Settings 32 Figure 4-18: Network Settings - DHCP 32 Figure 4-19: Network Settings - Fixed IP 33 Figure 4-20: Enter IP Address 33 Figure 4-21: Edit Subnet Mask 3 3 Figure 4-22: Enter Subnet Mask 33 Figure 4-23: Select Phone Settings 34 Figur ...

  • Cisco Systems WIP300 - page 9

    Wireless-G IP Phone Figure 4-67: Enter Register Proxy IP 47 Figure 4-68: Enter Register Proxy Port 47 Figure 4-69: Change Outbound Proxy IP 48 Figure 4-70: Edit Outbound Proxy Port 48 Figure 4-71: Change Expire Time 48 Figure 4-72: Change Phone Number 48 Figure 4-73: Change User Name 49 Figure 4-74: Change Password 49 Figure 4-75: Edit Payload Type ...

  • Cisco Systems WIP300 - page 10

    Wireless-G IP Phone 1 Chapter 1: Introduction Welcome Chapter 1: Introduction W elcome Thank you for choosing the Lin ksys Wireless-G IP Phone . It will allow you to make phone calls using your br oadband connection, whether you’re at home or in your office . How does the IP Phone do this? It connects to your wireless rout er or access point to r ...

  • Cisco Systems WIP300 - page 11

    Wireless-G IP Phone 2 Chapter 1: Introduction What’s in This User Guide? What’ s in This User Guide? This guide covers installing, configuring, and troubleshooting the Wireless-G IP Phone. • Chapter 1: Introduction Describes the IP Phone’ s applic ations and this User Guide. • Chapter 2: Getting to Know the Wireless- G IP Phone Describes ...

  • Cisco Systems WIP300 - page 12

    Wireless-G IP Phone 3 Chapter 1: Introduction What’s in This User Guide? • Appendix E: Regulator y Information Provides regulatory information regarding the IP Phone . • Appendix F: Contact Inform ation Provides contact information fo r a variety of Linksys resources, including T echnical Support. ...

  • Cisco Systems WIP300 - page 13

    Wireless-G IP Phone 4 Chapter 1: Introduction What’s in This User Guide? ...

  • Cisco Systems WIP300 - page 14

    Wireless-G IP Phone 5 Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom Panel Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom P anel The IP Phone’s USB mini-B port is located on the bo ttom panel of the Phone . Use the USB mini-B port to connect the included AC adapter to the IP Phone to charge its battery . USB mini-B P ...

  • Cisco Systems WIP300 - page 15

    Wireless-G IP Phone 6 Chapter 2: Getting to Know the Wireless-G IP Phone The Front Panel The Front P anel The IP Phone’s buttons and their functions are described in the table below: Icon Button Name Function Softkeys Press the Soft Keys to select menu it ems directly above the Soft Keys. Navigation Button Move the Navigation butto n up or down t ...

  • Cisco Systems WIP300 - page 16

    Wireless-G IP Phone 7 Chapter 2: Getting to Know the Wireless-G IP Phone The Side Panel The Side P anel The IP Phone’s Headset jack is located on the si de panel of the Phone . Use it to connect a he adset for hands-free operation. Headset Jack ...

  • Cisco Systems WIP300 - page 17

    Wireless-G IP Phone 8 Chapter 2: Getting to Know the Wireless-G IP Phone The Back Panel The Back P anel The IP Phone’s battery compartment is located on the back panel o f the IP Phone . For directions on how to insert the batter y , r ef er to “Chapter 3: Installi ng and Using the Wireless-G IP Phone”. Battery compartment ...

  • Cisco Systems WIP300 - page 18

    Wireless-G IP Phone 9 Chapter 3: Installing and Using the Wireless-G IP Phone Overview Chapter 3: Installing and Using the Wireless-G IP Phone Overview This chapter provides instructions for firs t-time installation and basic use of the IP Phone . Follow the steps below to get sta rted. Once you have finished configuring the phone you will be able ...

  • Cisco Systems WIP300 - page 19

    Wireless-G IP Phone 10 Chapter 3: Installing and Using the Wireless-G IP Phone Charging the IP Phone’s Battery Charging the IP Phone’ s Battery 1. Connect the small end of the included AC power adapter to the USB mini-B po rt on the bottom of the IP Phone. 2. Plug the other end of the adapter into a standard electrical ou tlet. Y ou see a charg ...

  • Cisco Systems WIP300 - page 20

    Wireless-G IP Phone 11 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone Setting up the Wire less-G IP Phone Before you begin, make sure you have an active Intern et connection and the account informa tion provided by your Internet phone ser vice provider . 1. Press the Po we r button to turn on the Pho ne . ...

  • Cisco Systems WIP300 - page 21

    Wireless-G IP Phone 12 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 5. When you are finished entering a password, press the Navigation button to save it. 6. Scroll to SIP Account , then press the Select Soft Key to enter the SIP Account menu. 7. Press the Option Soft Key , then press the Select Soft Key ...

  • Cisco Systems WIP300 - page 22

    Wireless-G IP Phone 13 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 8. Highlight each setting your ser vice provid er requires you to change , then press the Select Soft Key to change the setting. When you are finished changing a setting , press the Navigation button to sa ve your changes. If you need t ...

  • Cisco Systems WIP300 - page 23

    Wireless-G IP Phone 14 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 10. When you are finished making changes in the advanced settings menu, press the Back Soft Key until you return to the Profile menu. 11. Highlight Network Prof ile , then pr ess the Select Soft key to enter the Network Profile menu. ...

  • Cisco Systems WIP300 - page 24

    Wireless-G IP Phone 15 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 12. Highlight the network profile that matches the type of securi ty you’ re using for your wireless netw ork. If you don’t have se curity enabled on your wireless network, highlight OPEN . 13. Press the Option Soft Key to enter the ...

  • Cisco Systems WIP300 - page 25

    Wireless-G IP Phone 16 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 14. Highlight Wireless Settings , then press the Select Soft Key to enter the Wireless Settings menu. 15. Highlight ESSID , then press the Select Soft Key to enter the ESSID menu. 16. Highlight Site Sur vey , then press the Na vigation ...

  • Cisco Systems WIP300 - page 26

    Wireless-G IP Phone 17 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone Y ou see a list of wireless networ ks in range of the Phone . High light your wireless network’ s ESSID name i n the list, then press the Navigatio n button to select it. Continue with step 18. 17. If you don’t see your wireless net ...

  • Cisco Systems WIP300 - page 27

    Wireless-G IP Phone 18 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 18. Press the Back Soft Key until you return to the Wireless Settings menu. 19. Highlight Security , then press the Navigation button to enter the Security menu. ...

  • Cisco Systems WIP300 - page 28

    Wireless-G IP Phone 19 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 20. Highlight the type of security you have en abled on your wireless network and press the Navigatio n button to select it. Then ch ange the settings to match your wireless network. If you don’t have security enabled on your wireless ...

  • Cisco Systems WIP300 - page 29

    Wireless-G IP Phone 20 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 22. Highlight Account Cho ice and press the Navigation button to enter the Account Choice menu. 23. Press the Naviga tion button to assign the default SIP acco unt to the current network profile . ...

  • Cisco Systems WIP300 - page 30

    Wireless-G IP Phone 21 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 24. Highlight On , then press the Navigation button to ac tivate the SIP Account. 25. Press the Back Soft Key until you return to the Phone’ s home screen. Installation is complete. Proceed to the next section, “Using the Wir eless- ...

  • Cisco Systems WIP300 - page 31

    Wireless-G IP Phone 22 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone Using the Wireless-G IP Phone T o make a call, enter the phone number you want to dial, then press the Call button. T o answer an incoming call, press the Accept Soft Key or the Call button. When you’re on a phone call, you can select the ...

  • Cisco Systems WIP300 - page 32

    Wireless-G IP Phone 23 Chapter 4: Configuring the Wireless-G IP Phone Home Screen Chapter 4: Configuring the Wireless-G IP Phone Home Screen The home screen displays a variety of informati on about the IP Phone . Refer to the table below for a list of icons that appear on the ho me screen and their meanings: Y ou can also display a summary of the p ...

  • Cisco Systems WIP300 - page 33

    Wireless-G IP Phone 24 Chapter 4: Configuring the Wireless-G IP Phone Main Menu Main Menu Press the Menu Soft Key on the Phone’s home screen to enter the Main menu. Refer to the sections below for inform ation on the options availab le in the Main menu. Phonebook The Phonebook can store and displa y up to 200 contacts. T o view a contact’s info ...

  • Cisco Systems WIP300 - page 34

    Wireless-G IP Phone 25 Chapter 4: Configuring the Wireless-G IP Phone E-mail T o get more information about a call in your call log, highlight the call, then press the Navigation button to display date and ti me information for the call. Refer to the table be low for a list of options available in the Missed Calls, Dialed Calls, and Received Cal ls ...

  • Cisco Systems WIP300 - page 35

    Wireless-G IP Phone 26 Chapter 4: Configuring the Wireless-G IP Phone Using the E-mail Client Using the E-mail Client Refer to the ta ble below for a list of opti ons availbe in the E-mail menu: Option Description Write New Compose a new e-mail message . Press the Navigation button to create a new e-mail message , then enter a subject, the recipien ...

  • Cisco Systems WIP300 - page 36

    Wireless-G IP Phone 27 Chapter 4: Configuring the Wireless-G IP Phone Speed Dial Speed Dial The Speed Dial menu allows you to assign up to nine phone numbers you frequently call to the number keys on the phone . Follow t he steps below to assign a contact to your Speed Dial list. 1. If necessary , press the Menu Soft Key , scroll to Speed Dial , th ...

  • Cisco Systems WIP300 - page 37

    Wireless-G IP Phone 28 Chapter 4: Configuring the Wireless-G IP Phone Profile Profile The Profile menu allows you to ma ke changes to your SIP accounts, network profiles, roaming options, profile password, or confi gure your IP phone using SecureEasySetup. Refer to the sections below for the options available in the Profile menu. Network Profile Th ...

  • Cisco Systems WIP300 - page 38

    Wireless-G IP Phone 29 Chapter 4: Configuring the Wireless-G IP Phone Editing a Network Pro file Editing a Network Profile The Edit menu allows you to edit the cur rently selected network profile . Refer to the table below for a list of options availab le in the Edit menu: Option Description Preview View a summary of the current network profie. Wir ...

  • Cisco Systems WIP300 - page 39

    Wireless-G IP Phone 30 Chapter 4: Configuring the Wireless-G IP Phone SIP Account SIP Account The SIP Account menu allows you to assign up to six SIP acco unts to your IP P hone . T o vi ew the details of an account, press the Navigation button. T o edit a SIP account, highlight the account you would like to edit, press the Option Soft Key , then p ...

  • Cisco Systems WIP300 - page 40

    Wireless-G IP Phone 31 Chapter 4: Configuring the Wireless-G IP Phone SIP Account T o rename a SIP account, highlight the account you would like to rename, pr ess the Option Soft Key , highlight Rename , then press the Select Soft Key to rename the SIP account. T o de lete a SIP account, highli ght the account you would like to delete, press the Se ...

  • Cisco Systems WIP300 - page 41

    Wireless-G IP Phone 32 Chapter 4: Configuring the Wireless-G IP Phone Roaming Roaming The Roaming menu allows you to set specific parameters for roaming from one wireless ac cess point to another . Refer to table be low for a list of optio ns available in the Roaming menu: Profile P assword The Profile Password menu allows y ou to cha nge the passw ...

  • Cisco Systems WIP300 - page 42

    Wireless-G IP Phone 33 Chapter 4: Configuring the Wireless-G IP Phone Secure Setup Secure Setup The Secure Setup menu allows you to configur e your IP Phone’ s wireless ne twork settings with the push of a button. If you have a Links ys wireless router or access point that supports Secure EasySetup, you can use the Secur e Setup feature to quickl ...

  • Cisco Systems WIP300 - page 43

    Wireless-G IP Phone 34 Chapter 4: Configuring the Wireless-G IP Phone Clock Clock The Cloc k menu allows you to se t the IP Phone’ s time and date settings. R efer to the table below for a li st of options a vailabl e in the Clock menu. Alarm Clock The Alarm Cloc k allows you to set an al arm to go off at a spe c ified time . Y ou can also set th ...

  • Cisco Systems WIP300 - page 44

    Wireless-G IP Phone 35 Chapter 4: Configuring the Wireless-G IP Phone Call Settings Call Settings The Call Settings menu allows you to change all call related settings on the IP Phone. Refer to the table below for a list of o ptions availabe in the Call Settings m enu. c Speed Dial The Speed Dial menu allows you to change the way the phone’ s spe ...

  • Cisco Systems WIP300 - page 45

    Wireless-G IP Phone 36 Chapter 4: Configuring the Wireless-G IP Phone Sound Settings Sound Settings The Sound Settings menu allows you to change the IP Phone ’ s speaker volume , ri nger settings, and wa rning tones. Refer to the ta ble below for a list of options available in the Sound Setting menu. Display Settings The Display Settings menu all ...

  • Cisco Systems WIP300 - page 46

    Wireless-G IP Phone 37 Chapter 4: Configuring the Wireless-G IP Phone Keypad Key pa d The Keypad menu allows you to customize the IP Phone’s ke ypad settings. Refer to the table belo w for a list of options availabl e in the Keypad menu. Option Description Keypad Lock Lock the IP Phone’ s keypad . T o unlock the keypad, press the Left Soft Key ...

  • Cisco Systems WIP300 - page 47

    Wireless-G IP Phone 38 Chapter 4: Configuring the Wireless-G IP Phone Tools T ools Use the T ools menu to view infor mation about your IP Phone and network st atus. Refer to the sect ions below for the options av ai lable in the T ools menu. Option Description Signal Quality View signal status information for the wireless access point you’re conn ...

  • Cisco Systems WIP300 - page 48

    Wireless-G IP Phone 39 Chapter 5: Using the Web-based Utility Overview Chapter 5: Using the Web-based Utilit y Overview For your convenience , you can use the Web-base d utility on your PC to view , change or ed it the most commonly used featur es of y our IP Phone. How to Access the Web-based Utility 1. T o start, you wi ll need the IP phone’ s ...

  • Cisco Systems WIP300 - page 49

    Wireless-G IP Phone 40 Chapter 5: Using the Web-based Utility How to Access the Web-based Utility Status Click on the Status tab to view the IP phone’s IP Address, Mac address, ESSID and BSSID . Note: T o make a selection or confirm an e ntry , you must click on the option at the bottom of the screen. Pressing the Enter key will not confirm your ...

  • Cisco Systems WIP300 - page 50

    Wireless-G IP Phone 41 Chapter 5: Using the Web-based Utility Phonebook Phonebook The Phonebook can store and display up to 200 cont acts. Use this option to add, edit or delete a contact. 1. Click on the Phonebook tab . T o add a contact, click New . The Phone Book Edit sc reen will display . On this sc reen , you can enter the contact’ s name, ...

  • Cisco Systems WIP300 - page 51

    Wireless-G IP Phone 42 Chapter 5: Using the Web-based Utility E-mail E-mail The IP Ph one’ s built-in e-mail client allows you to send and receive messages us ing your POP3 e-mail account. Click on the E-mail tab. Y ou can choose to Configure a new e-mail contact, Remove an existing contact, or make a contact Active . T o Configure a new account, ...

  • Cisco Systems WIP300 - page 52

    Wireless-G IP Phone 43 Chapter 5: Using the Web-based Utility Network Profile Network Profile The Network Profile menu allows you to assi gn up to six wireless access points for your IP Phone connection. Cl ick on the Netwo rk tab to see the Network Profile List. This list shows the six account s, including the one that is Active . Only one account ...

  • Cisco Systems WIP300 - page 53

    Wireless-G IP Phone 44 Chapter 5: Using the Web-based Utility SIP SIP Y ou can use SIP to Configure or Remove th e SIP Account Settings. Y ou can assign up to si x SIP accounts to your IP Phone . T o vie w the SIP settings, select the SIP tab . Y ou will see the Account List. This list shows the conf igured accounts and which ones ar e active . T o ...

  • Cisco Systems WIP300 - page 54

    Wireless-G IP Phone 45 Chapter 5: Using the Web-based Utility Settings Settings Click the Settings tab to make changes to Call, Sound and Display Settings a nd the Clock. Refer to the table below for a list o f options in the Settings Menu. Figure 5-6: Settin gs scr een ...

  • Cisco Systems WIP300 - page 55

    Wireless-G IP Phone 46 Chapter 5: Using the Web-based Utility Settings Sound Settings Click the Sound Settings tab to change the IP Phone’ s speaker volume, ringer settings, and w a rning to nes. Refer to the table be low for a list of options available in the Sound Settings menu. Option Description Call Waiting Check to enable Ca ll Waiting , un ...

  • Cisco Systems WIP300 - page 56

    Wireless-G IP Phone 47 Chapter 5: Using the Web-based Utility Settings Display Settings Click the Display Settings tab to customize the IP Phone’s display . R efer to the table below for a list of options available in the Display Settings menu. Clock Click the Clock tab to set the IP Phone’ s time and date settings . Refer to the table below fo ...

  • Cisco Systems WIP300 - page 57

    Wireless-G IP Phone 48 Chapter 5: Using the Web-based Utility Software Software Select the Software tab . Y ou ca n view the Software Information for your Wi-Fi phone. Click on Upgr ade to confirm the settings, or click on Cancel Settings if you do not want to upgrade . Software Information Option Description Active View the Active software appl ic ...

  • Cisco Systems WIP300 - page 58

    Wireless-G IP Phone 49 Chapter 5: Using the Web-based Utility Bootcode Bootcode Select the Bootcode tab . Y ou can view the Current Version of the Wi-Fi phone’ s Bootco de Information. Y ou can update the Bootcod e Image by entering the Bootcode Image infor mation, selecting it by clicking on Choose . Click on Upgrade to confirm the settings, or ...

  • Cisco Systems WIP300 - page 59

    Wireless-G IP Phone 50 Chapter 5: Using the Web-based Utility Password Pa s s w o r d This screen allows you to change the passw ord information of the Wi-Fi phone . Select th e Password tab. Enter the new Username a nd/o r Password for the IP Phone . Select Save Settings to immediately change the password, or selec t Cancel Se tt ings to cancel. R ...

  • Cisco Systems WIP300 - page 60

    Wireless-G IP Phone 51 Appendix A: Troubleshooting Common Problems and Solutions Appendix A: Troubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G IP Phone . Read the description b elow to solve your problems. If you can't find an answer here, chec k the website of y ...

  • Cisco Systems WIP300 - page 61

    Wireless-G IP Phone 52 Appendix A: Troubleshooting Common Problems and Solutions If you have a Linksys router , th en follow these instructions: 1. On on e of your networked computers, open your web browser . 2. Access the Router ’ s Web-ba sed Utility by going to http://192.168.1.1 or the IP address of the Router . 3. A login sc reen will appear ...

  • Cisco Systems WIP300 - page 62

    Wireless-G IP Phone 53 Appendix A: Troubleshooting Common Problems and Solutions 2. When I’m on a telephone call, wor d s ar e dropped intermittently . Go through this checklist until your problem is solved: • Are you using a wireless router and cordless phone? If so, the router and cordless phone may be using the same frequency and interfere w ...

  • Cisco Systems WIP300 - page 63

    Wireless-G IP Phone 54 Appendix A: Troubleshooting Common Problems and Solutions 6. Wait 10 seconds. Power on the IP Phone by pres sing and holding down the Power On/Off button for two seconds. 7. Re boot one of your networked computers, and check for an active Internet conn ection. • Set up port forwarding on your router . Y o u must sp ecify th ...

  • Cisco Systems WIP300 - page 64

    Wireless-G IP Phone 55 Appendix A: Troubleshooting Common Problems and Solutions 8. Repeat steps 5-7 until you have entered all four port ranges for the IP Phone . 9. Check the Enable option for the port services you want to use . 10. When you have completed th e configuration, click the Save Settings button. 4. The power LED does not light up. Go ...

  • Cisco Systems WIP300 - page 65

    Wireless-G IP Phone 56 Appendix A: Troubleshooting Frequently Asked Questions Frequently Ask ed Questions Can I make calls if my Internet connection is down? No. Y our high-speed Internet connection must be active when you make Inte rnet phone calls. Can I use the IP Phone to make a call an d browse the Internet a t the same time? No. The IP Phone ...

  • Cisco Systems WIP300 - page 66

    Wireless-G IP Phone 57 Appendix B: Glossary Appendix B: Glossar y This glossary contains some basic netw orking terms you may come ac ross when using this product. For more advanced terms, see the complete Linksys glossary at http://www .linksys.com/glossary . Access Po int - A device that allows wireless-equi pped computers and other devices to co ...

  • Cisco Systems WIP300 - page 67

    Wireless-G IP Phone 58 Appendix B: Glossa ry DMZ ( D e m ilitarized Z one) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS ( D omain N ame S erver) - The IP address of your ISP's server , which translates the names of websi tes into IP addresses. Domain - A specific name for a ne ...

  • Cisco Systems WIP300 - page 68

    Wireless-G IP Phone 59 Appendix B: Glossary ISP ( I nternet S er vice P rovider) - A company that prov ides access to the Internet. LAN - The computers and networking produc ts that make up your local network. MAC ( M edia A ccess C ontrol) Address - The unique address that a manufacturer assigns to each networking device . Mbps ( M ega B its P er ...

  • Cisco Systems WIP300 - page 69

    Wireless-G IP Phone 60 Appendix B: Glossa ry Switch - 1. A data switch that conn ects com puting devices to host computers, allowi ng a large number of devices to s hare a limited number of ports. 2. A device fo r making, br eaking, or cha nging the connections in an electrical cir cuit. TCP ( T ransmission C ontrol P rotocol) - A netw ork protocol ...

  • Cisco Systems WIP300 - page 70

    Wireless-G IP Phone 61 Appendix C: Specifications Appendix C: Specifications Model WIP330 Standards 802.11b , 802.11g Channels 11 Channels (US , Canada), 13 Channels (Europe) T ransmit Power 12 dBm for 802.11b and 802.11g @ Normal T emp Range External Interface One Mini USB 1.1 Port, O ne Stereo Ear Phone Jack Display 2.2 inch (55.9 mm) (240 x 320 ...

  • Cisco Systems WIP300 - page 71

    Wireless-G IP Phone 62 Appendix C: Specifications DTMF T ransmission In-band, Out-band (RFC2833) Voice Quality Acoustic Echo Cancellation Jitter Buffer Control Comfortable Noise Generation Packet Loss Concealment Dimensions 1.84" x 5.32" x 0.74" (W x H x D) (46.7 mm x 135.2 mm x 18.8 mm) Unit Weight 4.20 oz. (0.12 kg) Power 3.7V , 12 ...

  • Cisco Systems WIP300 - page 72

    Wireless-G IP Phone 63 Appendix D: Warranty Information Appendix D: Warrant y Information LIMITED WARRANTY Y our Internet phone ser vice provider w arran ts to Y ou that, for a period of one year (the “W arranty Period”), your Linksys Produ ct will be substantially free of defects in materials and workmans hip under normal use. Y our exclusive ...

  • Cisco Systems WIP300 - page 73

    Wireless-G IP Phone 64 Appendix D: Warranty Information ...

  • Cisco Systems WIP300 - page 74

    Wireless-G IP Phone 65 Appendix E: Regulatory Information Appendix E: Regulator y Information FCC Statement This product has been tested a nd complies with the specificatio ns for a Class B digital d evice , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a residentia ...

  • Cisco Systems WIP300 - page 75

    Wireless-G IP Phone 66 Appendix E: Regulatory Information Safety Notices Caution: T o reduce the risk of fire , use only No. 26 A WG or larger tele communicatio n line cord. Do not use this product near water , for example , in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of ...

  • Cisco Systems WIP300 - page 76

    Wireless-G IP Phone 67 Appendix E: Regulatory Information User Information for Consumer Products Covered by EU Dire ctive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains import ant infor mation for users with rega rds to th e proper disposal and recy clin g of Linksys products. Consumers are required to comply wi ...

  • Cisco Systems WIP300 - page 77

    Wireless-G IP Phone 68 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 78

    Wireless-G IP Phone 69 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 79

    Wireless-G IP Phone 70 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 80

    Wireless-G IP Phone 71 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 81

    Wireless-G IP Phone 72 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 82

    Wireless-G IP Phone 73 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 83

    Wireless-G IP Phone 74 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 84

    Wireless-G IP Phone 75 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 85

    Wireless-G IP Phone 76 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 86

    Wireless-G IP Phone 77 Appendix E: Regulatory Information ...

  • Cisco Systems WIP300 - page 87

    Wireless-G IP Phone 78 Appendix E: Regulatory Information For more information, visit w ww .linksys.com. ...

  • Cisco Systems WIP300 - page 88

    Wireless-G IP Phone 79 Appendix F: Contact Information Appendix F: Contact Information Need to contact Linksys? Visit us online for information on the latest prod ucts and updates to your existing products at: http://www .linksys.com or ftp.linksys.com Can't find information about a product you want to buy on the web? Do you want to know more ...

  • Cisco Systems WIP300 - page 89

    Wireless-G IP Phone 80 Appendix F: Contact Information ...

  • Cisco Systems WIP300 - page 90

    www .linksys.com ...

Manufacturer Cisco Systems Category IP Phone

Documents that we receive from a manufacturer of a Cisco Systems WIP300 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- WIP300 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems WIP300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems WIP300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems WIP300, service manual, brief instructions and user manuals Cisco Systems WIP300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems WIP300.

Similar manuals

A complete manual for the device Cisco Systems WIP300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems WIP300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems WIP300.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems WIP300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems WIP300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems WIP300, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems WIP300 - which should help us in our first steps of using Cisco Systems WIP300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems WIP300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems WIP300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems WIP300?

Use the form below

If you did not solve your problem by using a manual Cisco Systems WIP300, ask a question using the form below. If a user had a similar problem with Cisco Systems WIP300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)