English dropdown-ico

Manual Aiphone 0207 AIC

47 pages 3.81 mb
Download

Go to site of 47

Summary
  • Aiphone 0207 AIC - page 1

    - 1 - 0207 AI C GH SERIES Apar tment Inter com System INSTALLATION &OPERATION MANUAL ...

  • Aiphone 0207 AIC - page 2

    - 2 - General Prohibitions General Precautions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water W ARNING (Negligence could result in death or serious injur y to people) 1. The unit must be installed and wired by a qualified technician. 2. Do not dismantle or alter the unit. Fire or electric shock could result. 3. Do not ...

  • Aiphone 0207 AIC - page 3

    - 4 - 1 SYSTEM CONFIGURA TION GH-D A/A + GH-SW GH-D A/A + GH-NS, GH-10K GH-V A + GH-D A/A + GH-SW GH-V A + GH-D A/A + GH-NS, GH-10K GH-BC GH-VBC 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 GH-MK Max. 5 (3 per trunk) Max. 2 GH-1KD GH-1KD GH-1KD GH-V A GH-DA/A GH-4Z GH-1KD GH-1KD GH-1KD GH-1KD a b c d e 1-1 GH-1KD + GH-HS ...

  • Aiphone 0207 AIC - page 4

    - 5 - Standard System Configuration (1) Audio signal line (2) V ideo signal line (3) Power supply line a. Entrance station (For details, see 2-1 and 2-2) [1] Audio/video + digital name scrolling type GH-V A + GH-D A/A + GH-NS, GH-10K [2] Audio/video + direct selection type GH-V A + GH-D A/A + GH-SW [3] Audio + digital name scrolling type GH-D A/A + ...

  • Aiphone 0207 AIC - page 5

    - 3 - 1 SYSTEM CONFIGURA TION Standard System Configuration 4 Expanded System Configuration 6 W iring Distance 7 2 COMPONENTS Unit (Entrance Station) 8 Combination Examples for Entrance Station, Unit (Bus Control Unit and Others) 9 Residential Station, Security Guard Station 10 3 MOUNTING Mounting the Entrance Station (1) 11 Mounting the Entrance S ...

  • Aiphone 0207 AIC - page 6

    - 6 - GH-V A + GH-D A/A + GH-NS, GH-10K GH-MK Max. 8 (3 per trunk) Max. 2 GH-V A GH-V A GH-1KD / GH-4Z a e 1-2 #2 #3 #4 #2 #3 #4 (1) (2) (3) :A :V :P [1] 1 #1 #2 a e a e f GH-BC GH-BC 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 GH-DA/A GH-DA/A GH-BC GH-VBC b GH-VBX GH-BCX/A [2] #1 #1 f #2 #4 #3 DP GH-V A + GH-D A/A + GH- ...

  • Aiphone 0207 AIC - page 7

    - 7 - 1-2 Expanded System Configuration Diagram 1. Common trunk line #1, 2 2. Sub trunk line #1 - 4 Sub trunk line #2 - #4 are the same as #1. Maximum 125 units per sub trunk line. (1) Audio signal line (2) V ideo signal line (3) Power supply line a. Entrance station (For details, see 2-1 and 2-2) b . Bus control unit c. Residential station (For de ...

  • Aiphone 0207 AIC - page 8

    - 8 - 2 COMPONENTS 2-1 Unit (Entrance Station) [1] Speech module panel GH-DP [2] Speech module GH-D A/A [3] Camera module panel GF-VP [4] Camera module GH-V A [5] 1-call button panel GF-1P [6] 2-call button panel GF-2P [7] 3-call button panel GF-3P [8] 4-call button panel GF-4P [9] Call switch module GH-SW [10] Digital name scroll module panel GF-N ...

  • Aiphone 0207 AIC - page 9

    - 9 - 2-2 2-3 Combination Examples for Entrance Station 1. Audio only . Direct selection (8 stations). 2. Audio/video. Direct selection (8 stations). 3. Audio only . Digital name scrolling. 4. Audio/video. Digital name scrolling. Unit (Bus Control Unit and Other s) [1] Bus control unit GH-BC (mounting bracket is not included) [2] Special scre wdriv ...

  • Aiphone 0207 AIC - page 10

    - 10 - 2-5 Security Guard Station [1] Security guard station GH-MK [2] Mounting screws (enclosed with GH-MK) [3] RS-232C cable (enclosed with GH-MK) 2-4 Residential Station [1] Audio residential station GH-1AD [2] Color monitor residential station GH-1KD [3] Mounting screws (enclosed with GH-1AD and GH-1KD) [4] Black-and-white monitor residential s ...

  • Aiphone 0207 AIC - page 11

    - 11 - Mounting the Entrance Station (1) [1] Back box [2] Joint pipe [3] Back box assembly dimensions [4] Special screwdri ver (enclosed with GH-BC) 1. Mounting the back box • Make a hole for the cable. • Use the joint pipe to assemble the back box. • Make sure the back box is mounted le vel. • Mount the camera and GH-NS module at eye-le ve ...

  • Aiphone 0207 AIC - page 12

    - 12 - 3-2 3-3 Mounting the Entrance Station (3) 1. Example of interconnection of modules. 2. Use GF-C to connect to the name scrolling module. 3. T o position the speech module in the center row , run GF-C through the joint pipe in adv ance. Mounting the Entrance Station (2) 1. Remov e the terminal cov er . 2. From the speech module to the next mo ...

  • Aiphone 0207 AIC - page 13

    - 13 - 3-4 Bus Control Unit and P ower Supply [1] Din rail (W -DIN11) [2] Screw hole [3] POWER switch [4] Power On LED (green) [5] Lock release lever [6] W all mounting screws (x2) 1. Mount GH-BC and GH-VBC to the Din rail. Click unit into place. ∗ T o remove GH-BC and GH-VBC, pull the lock release le ver do wn. ∗ If there is a problem with the ...

  • Aiphone 0207 AIC - page 14

    - 14 - 3-5 3-6 Residential Station [1] Mounting scre ws (x2) [2] Mounting bracket [3] 1-gang box or round back box [4] T erminal block (GH-1AD, GH-1KD) 1. Mount the mounting bracket on the 1-gang box. 2. Connect the wiring to the terminal block. 3. Mount the station unit to the mounting bracket. Strip away the jack et of the cable and insert all wi ...

  • Aiphone 0207 AIC - page 15

    - 15 - Security Guard Station (Desk-top Mounting Using GFW -S Stand) [1] Screws included with GFW -S (x4) [2] Cable tie included with GFW -S 1. Separate the mounting bracket and the protecti ve co ver from the back of the unit. 2. Mount the mounting bracket to GFW -S as shown in the drawing. 3. Connect the wiring to the terminal block, inserting th ...

  • Aiphone 0207 AIC - page 16

    - 16 - 4 WIRING 1P Entrance #2 - #5 T r unk line #3 - #6 Door release Entrance station #1 1P(Audio) 1P(Video) 1P GH-BC GH-MK #1 GH-VBC 1Px2 T r unk line #1 T r unk line #2 1Px2 1P 1P 1Px2 1Px2 1Px2 1Px2 1Px2 PS24 PS24 PS24 Distribution point R1 R2 GH-4Z GH-4Z 1Px2 1Px2 1Px2 1Px2 1Px2 1P 1P 1Px2 1Px2 1Px2 1Px2 Doorbell GH-1MD GH-1KD GH-1AD GH-1AD GH ...

  • Aiphone 0207 AIC - page 17

    - 17 - Light Orange Orange White Blue GH-4Z B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2 B1 B2 R1 R2 OUT 3 OUT 4 B1 B2 R1 R2 B1 B2 R1 R2 OUT 1 LINE OUT LINE IN OUT 2 B A GH-4Z B A B A 1Px2 1Px2 1Px2 1Px2 1Px2 T er minate the last GH-4Z 1Px2 1Px2 1Px2 1P R1 R2 B1 B2 C CE C CE B1 B2 B1 B2 OUT IN R1 R2 R1 R2 OUT IN GH-1MD GH-1KD GH-1KD OUT OUT IN I ...

  • Aiphone 0207 AIC - page 18

    - 18 - IN1 IN2 IN3 IN4 IN5 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 A1 A2 A1 A2 A1 A2 A1 A2 A1 A2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 + – GH-VBC IN1 IN2 IN3 IN4 IN5 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 A1 A2 A1 A2 A1 A2 A1 A2 A1 A2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 + – GH-VBC GH-VA #2 - #5 GH-DA/A #1 GH-MK #1 GH-10K #1 CN100 CN1 CN3 + – A1 A2 GH-NS #1 CN3 + ...

  • Aiphone 0207 AIC - page 19

    - 19 - Standard System (2) Station-to-Station Wiring [1] Residential station GH-1KD, GH-1AD • There can be a maximum of 25 stations per trunk. • For the terminating residential station GH-1KD, set the setting switch (SW1) to "A". [2] Short lead • T o use the emergency alarm switch (see 11-7 for details), disconnect the short lead an ...

  • Aiphone 0207 AIC - page 20

    - 20 - SW1 A B IN OUT R1 R2 R1 R2 C 0.65 10 9 CE K KE Do not remove the wires (For end users) 4-3 [2] [1] [5] GH-1KD GH-1KD GH-4Z GH-4Z d GH-VBC GH-BC b SW1 B A SW1 B A SW1 B A SW1 B A 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP AC B GH-RY [4] [3] [3] [3] [3] b a e d R2 R1 B2 B1 R2 R1 B2 B1 R2 R1 B2 B1 R2 R1 ...

  • Aiphone 0207 AIC - page 21

    - 21 - 4-3 Standard System (3) Homerun Wiring [1] 4-way video junction unit GH-4Z • For the terminating GH-4Z (maximum of 6 units per trunk), set the setting switch (SW1) to "A". [2] Residential station GH-1KD, GH-1AD, GH-1MD • For GH-1KD, set the setting switch (SW1) to "A". [3] Short lead • T o use the emergency alarm sw ...

  • Aiphone 0207 AIC - page 22

    - 22 - 1P 1P(Audio) 1P(Video) 1P GH-BC GH-BC GH-BC GH-VBC 1P 1P 1P Distribution point Distribution point Distribution point 1Px2x5 1Px2 1Px2 1Px2 GH-MK #2 GH-MK #2 GH-NS #2 , #3 GH-NS #4 - #6 GH-NS #7 , #8 1Px2 1Px2 Door release Entrance station #1 Expanded system GH-MK #1 Doorbell GH-MK #1 GH-1KD Doorbell GH-1KD Doorbell 1Px2 1Px2 R1 R2 T r unk li ...

  • Aiphone 0207 AIC - page 23

    - 23 - AC GH-NS #2 , #3 GH-MK #2 + - ELB ELC ELM + RY RY - CN2 CN1 GH-D A/A GH-NS GH-10K GH-V A CN3 CN100 Entrance station #1 CN1 CN3 GH-MK #1 - C CE + - AC 1Px2 B1 B2 B1 B2 B1 B2 OUT1 IN1 A1 A2 IN2 A1 A2 IN3 A1 A2 IN4 A1 A2 IN5 OUT2 OUT3 OUT4 OUT5 OUT6 + 1Px2 + - AC GH-BC GH-VBC + - AC + + + - AC GH-BC + - + - AC GH-MK #1 , #2 GH-BC + - Distributi ...

  • Aiphone 0207 AIC - page 24

    - 24 - 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP 1P NP A1 A2 PS-2410LC PS-2410LD PS-2410DIN AC AC AC [7] PS24 GH-VBC A1 A2 B1 B2 B1 B2 + – IN1 OUT6 OUT1 d c () GH-BC + – R1 R2 R1 42 31 R2 [6] DP A B b b A b B b PS24 PS24 R1 R2 [5] GH-BC + – R ...

  • Aiphone 0207 AIC - page 25

    - 25 - Expanded System 1. Common trunk line: maximum of 2 trunk lines 2. Sub trunk line: maximum of 4 trunk lines Maximum of 125 units (maximum of 48 units for standard system) • The wiring of the sub trunk line is the same as the standard system. For details, see 4-1 to 4-3. [1] Entrance Station • Basic System #1 - #5 • Expanded System (#1 - ...

  • Aiphone 0207 AIC - page 26

    - 26 - 6-1 Entrance Station 1. Digital name scrolling entrance station • Camera module GH-V A [1] Camera • Speech module GH-D A/A [2] Speaker [3] In Use LED [4] Microphone • Digital name scrolling module GH-NS [5] Display [6] Cancel button (or set and return) [7] Back search button (or mov e cursor to the left) [8] Forward search b utton (or ...

  • Aiphone 0207 AIC - page 27

    - 27 - 6-2 Residential station (GH-1MD) [1] V ideo monitor 4 inch black and white CR T [2] Microphone [3] Speaker [4] Light button / Security guard station call b utton [5] Door release / Monitor button [6] T alk button [7] T alk LED [8] Monitor brightness control [9] Receiv e volume control [10] Call tone volume control Security Guard Station [1] ...

  • Aiphone 0207 AIC - page 28

    - 28 - 8-1 Adjusting the Camera Angle 1. V iew from the initial camera position 2. Changing the camera angle • Remov e the rubber cap. Mov e the lev er to the desired position. ∗ Do not forget to reset the rubber cap. 3. Image vie w area after adjustment [1] When camera has been adjusted to the left [2] When camera has been adjusted to the righ ...

  • Aiphone 0207 AIC - page 29

    - 29 - 8-3 Making Adjustments with the Mounting Gauge [1] Mounting gauge • T o mount multiple rows of panels, apply the mounting gauge to the mounting bracket. While using the mounting gauge to make adjustments, tighten the scre ws. ∗ There is a mounting gauge for the built-in back box of GF-2B and GF-3B. [1] [1] ...

  • Aiphone 0207 AIC - page 30

    - 30 - Setting up the System 1. Make sure that all units are installed and wired properly . T urn on the power switch in GH-BC. When the system includes GH- NS, program the resident information (names and room numbers) in adv ance. (For details, see 8-5) 2. Loosen the base screw and open and remov e the front panel. 3. Set the system to program mod ...

  • Aiphone 0207 AIC - page 31

    - 31 - 8-5 Programming (GH-NS) a. Programming with a PC • Y ou can use a PC to enter data and write in or change resident names. • Use the connection cable that comes with GH-NS to connect your PC to GH-NS. • In your PC, install the setup tool program from the CD that comes with the GH-BC. ∗ For information on ho w to use the setup tool, se ...

  • Aiphone 0207 AIC - page 32

    - 32 - 8-6 4 5 6 1 2 3 7 8 ENGLISH FRANCAIS DEUTSCH ESPANOL NEDERLANDS SELECT LANGUAGE ENGLISH Y OUR OPERA TION DISPLA Y MENU Menu 2 SELECT LANGUAGE DECIDE & BA CK FORW ARD Scroll BACKW ARD DECIDE & NEXT Max. 20 (01)~(20) programmab le ACCESS CODE ACCESS CODE (01) ID 01 (4-digit) ACCESS CODE (02) 8910 Enter a code. ACCESS CODE (01) 4567 Y O ...

  • Aiphone 0207 AIC - page 33

    - 33 - 8-6 Program Mode (GH-NS) 1. Menu 1: Select language Choose language to be displayed on GH-NS. 2. Menu 2: Change ID code Enter new ID code starting with " ∗ ", then 4-digit number . (Example: ∗ 1234) 3. Menu 3: Set access code Enter new 4-digit Access Code. (Example: 1234) • (0000) cannot be registered as an access code. • R ...

  • Aiphone 0207 AIC - page 34

    - 34 - 9 SETTING UP (SECURITY GU ARD ST A TION) GH-MK Enter Program Mode Select Menu & Quit 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 101 SMITH 2 B A C 1 3 E D F 5 K J L 4 H G I 6 N M O 8 U T V 7 R Q P S Y X W Z 9 0 2 B A C 1 3 E D F 5 K J L 4 ...

  • Aiphone 0207 AIC - page 35

    - 35 - 9-1 Programming (GH-MK) • Make sure that all units are installed and wired properly . T urn on the po wer switch to GH-BC. Program the resident information (names and room numbers) in advance. a. Programming with a PC • Y ou can use a PC to enter data and write in or change resident names. • Use the connection cable that comes with GH- ...

  • Aiphone 0207 AIC - page 36

    - 36 - 4 1 2 3 ENGLISH FRANCAIS DEUTSCH ESPANOL NEDERLANDS SELECT LANGUAGE ENGLISH Y OUR OPERA TION DISPLA Y MENU Menu 2 SELECT LANGUAGE DECIDE & BA CK FORW ARD Scroll BACKW ARD DECIDE & NEXT 5 Menu 3 Enter new ID code CHANGE ID CODE NEW ID (4-digit) INITIAL ID CHANGE ID CODE 1111 CHANGE ID CODE Y OUR OPERA TION DISPLA Y Mov e cursor T O RI ...

  • Aiphone 0207 AIC - page 37

    - 37 - 9-2 Program Mode (GH-MK) 1. Menu 1: Select language Choose language to be displayed on GH-MK. 2. Menu 2: Change ID code Enter new ID code starting with " ∗ ", then 4-digit number . (Example: ∗ 1234) 3. Menu 3: Write in resident information Register room #s and resident names. Enter room #s using 1 to 6-digit characters. Enter r ...

  • Aiphone 0207 AIC - page 38

    - 38 - 10 OPERA TIONS (ENTRANCE ST A TION) 10-1 Calling a Residential Station 1. Direct Selection GH-SW • Press the call button for the residence that you w ant to call. Y ou will hear a lo w-volume call tone from the entrance station. 2. Digital name scrolling GH-NS • Display the resident name you want to call and press the call button. Y ou w ...

  • Aiphone 0207 AIC - page 39

    - 39 - 10-2 10-3 Calling the Security Guard Station Press the call button once. Y ou will hear a low-v olume call tone from the entrance station. Door Release 1. Enter the access code. (8-6, Menu 3) 2. The door release will be acti vated at the entrance station. 11-1 Replying to a Call 1. When the call is from an entrance station or security guard ...

  • Aiphone 0207 AIC - page 40

    - 40 - 11-3 11-4 Door Release 1. Press the door release button while in communication. 2. The door release function will acti vate on the entrance station that is in communication. ∗ Depending on the electric door release system that you use, the door release may be activ e only while the door release b utton is pressed. T urning on the Entrance ...

  • Aiphone 0207 AIC - page 41

    - 41 - 11-7 Emergency Alarm 1. Press and lock the emergenc y alarm switch (or when there is a line - off trouble). 2. An alarm will sound from the residential station. 3. When there is a call from the security guard station, the alarm will change to a standard call tone and sound for approximately 45 seconds. 4. Press the talk button to communicate ...

  • Aiphone 0207 AIC - page 42

    - 42 - 12-1 12-2 Replying to a Call fr om an Entrance Station 1. When a call is recei ved from an entrance station, a call tone will sound for approximately 10 seconds at the security guard station and the entrance station number will be displayed. Lift the handset and respond. When you are done talking, replace the handset. Communication ends auto ...

  • Aiphone 0207 AIC - page 43

    - 43 - 12-3 12-4 Calling an Entrance Station 1. Lift the handset and press the ∗ button and 1 b utton. 2. Use the 10 key to select the desired entrance station. W ith Expanded System, entering Entrance station's unit ID# is different by COMMON lines' connection between Entrance stations and Security guard stations. Connected to same com ...

  • Aiphone 0207 AIC - page 44

    - 44 - d. Making a call by ID# Lift the handset and press the " ∗ " button and "1" b utton. Press the "0" button, the security guard station ID (1 -4) b utton and then the call button. Y ou will hear a low-v olume call tone from the handset. W ith Expanded System, entering Security guard station's unit ID# is di ...

  • Aiphone 0207 AIC - page 45

    - 45 - 12-8 12-7 Reception mode Setting While in standby mode, press " ∗ ", "1" and " ∗ " on a security guard station to display "RECEPTION MODE". In this mode, you can intercept a call from an entrance to a tenant, and transfer the calls directly to the security guard station. Press " ∗ ", &q ...

  • Aiphone 0207 AIC - page 46

    - 46 - T echnical precautions • Operating temperature: Entrance Station: -10 ° C to 60 ° C (14 ° F to 140 ° F) Residential Station: 0 ° C to 40 ° C (32 ° F to 104 ° F) Security Guard Station: 0 ° C to 40 ° C (32 ° F to 104 ° F) Control Unit: 0 ° C to 40 ° C (32 ° F to 104 ° F) • Mounting location: Do not install the entrance sta ...

  • Aiphone 0207 AIC - page 47

    - 47 - AIPHONE CO., LTD., NAGOYA, JAPAN AIPHONE CORPORATION, BELLEVUE, WA, USA AIPHONE S.A.S., LISSES-EVRY, FRANCE http://www.aiphone.com/ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful ...

Manufacturer Aiphone Category Intercom System

Documents that we receive from a manufacturer of a Aiphone 0207 AIC can be divided into several groups. They are, among others:
- Aiphone technical drawings
- 0207 AIC manuals
- Aiphone product data sheets
- information booklets
- or energy labels Aiphone 0207 AIC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Aiphone 0207 AIC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Aiphone 0207 AIC, service manual, brief instructions and user manuals Aiphone 0207 AIC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Aiphone 0207 AIC.

Similar manuals

A complete manual for the device Aiphone 0207 AIC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Aiphone 0207 AIC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Aiphone 0207 AIC.

A complete Aiphone manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Aiphone 0207 AIC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Aiphone 0207 AIC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Aiphone 0207 AIC, that we can find in the current document
3. Tips how to use the basic functions of the device Aiphone 0207 AIC - which should help us in our first steps of using Aiphone 0207 AIC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Aiphone 0207 AIC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Aiphone 0207 AIC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Aiphone 0207 AIC?

Use the form below

If you did not solve your problem by using a manual Aiphone 0207 AIC, ask a question using the form below. If a user had a similar problem with Aiphone 0207 AIC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)