Manual Pelco 1/3-Inch CCD Camera

16 pages 0.1 mb
Download

Go to site of 16

Summary
  • Pelco 1/3-Inch CCD Camera - page 1

    CCC1380H-6, CCC1380H-6X, and MCC1380H-6 C1963M (8/04) ® INST ALLA TION/OPERA TION 1/3-Inch CCD Camera ...

  • Pelco 1/3-Inch CCD Camera - page 2

    2 C1963M (8/04) CONTENTS Section Page IMPORT ANT SAFETY INSTRUCTIONS ............................................................................................... 3 REGULA TORY NOTICES ............................................................................................................. 4 DESCRIPTION ....................................... ...

  • Pelco 1/3-Inch CCD Camera - page 3

    C1963M (8/04) 3 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed ...

  • Pelco 1/3-Inch CCD Camera - page 4

    4 C1963M (8/04) REGULA TORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This ...

  • Pelco 1/3-Inch CCD Camera - page 5

    C1963M (8/04) 5 DESCRIPTION The CCC1380H-6, CCC1380H-6X, and MCC1380H-6 digital cameras are high resolution, compact video cameras that feature a 1/3-inch CCD imager . Each camera’ s high resolution and high-density image sensor ensure a sharp and clear picture over a wide range of conditions. MODELS CCC1380H-6 1/3-inch, high resolution, color CC ...

  • Pelco 1/3-Inch CCD Camera - page 6

    6 C1963M (8/04) LOCA TION AND FUNCTION OF P ARTS  Lens Mount The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between the lens and camera.  Back Focus Lock Screw Loosen the locking screw to adjust the back focus. Back focus adjustment has been set at the factory to the standard CS-mount ...

  • Pelco 1/3-Inch CCD Camera - page 7

    C1963M (8/04) 7  Eclipser Level Controls The eclipser function is set at the factory and usually does not need to be readjusted. However , if adjustment is necessary , refer to the section on Eclipser Adjustment in this manual. THRE Sets the level for the brightest part of the picture. Anything brighter than this adjustment will be eclipsed. ECL ...

  • Pelco 1/3-Inch CCD Camera - page 8

    8 C1963M (8/04) A WB – Automatic White Balance Following are the AWB switch settings: OFF – Processes the viewed image to retain color balance in a restricted color temperature range. ON (Default setting) – Automatically processes the viewed image to retain color balance over a wide color temperature range. SYNC – Synchronization Locks the ...

  • Pelco 1/3-Inch CCD Camera - page 9

    C1963M (8/04) 9 CONNECTIONS POWER To connect to the power supply: 1. Strip at least .50 inch (13 mm) from the power cord to expose the wires. 2. Insert the three wires into the holes in the terminal strip until they snap into place. 3. Confirm that the cord is connected to terminal securely by lightly tugging on the cord. If you are wiring more tha ...

  • Pelco 1/3-Inch CCD Camera - page 10

    10 C1963M (8/04) LENS INST ALLA TION The CCC1380H-6, CCC1380H-6X, and MCC1380H-6 can use fixed, manual, or passive (DC- controlled) auto iris lenses. The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between lens and camera. LENS MOUNTING 1. Screw the lens onto the lens mount. Be careful to pr ...

  • Pelco 1/3-Inch CCD Camera - page 11

    C1963M (8/04) 11 BACK FOCUS ADJUSTMENT Do not release the back focus locking ring unnecessarily . Back focus adjustment has been set at the factory to the standard CS-mount back focus distance. However , once a lens is mounted it may be necessary to adjust back focal length to match the lens being used. FIXED FOCAL LENGTH LENSES 1. Mount the lens f ...

  • Pelco 1/3-Inch CCD Camera - page 12

    12 C1963M (8/04) CAMERA SYNCHRONIZA TION The power supply of each camera is set to the same synchronized phase at the factory and usually does not need to be readjusted. When using more than one camera power supply , a brief vertical roll may occur on the monitor each time a camera view is switched. T o eliminate vertical roll, adjust the phase con ...

  • Pelco 1/3-Inch CCD Camera - page 13

    C1963M (8/04) 13 ECLIPSER ADJUSTMENT The eclipser function is set at the factory and usually does not need to be readjusted. However , if fine tuning is necessary , do the following: 1. Set the DIP switches. a. AGC: OFF b. ESC: OFF c. BLC: OFF 2. Set the variable resistors and Eclipse DIP switch. a. THRE: Counterclockwise b. ECLP: Mechanical center ...

  • Pelco 1/3-Inch CCD Camera - page 14

    14 C1963M (8/04) SPECIFICA TIONS GENERAL Imaging Device 1/3-inch interline transfer CCD Picture Elements CCC1380H-6, MCC1380H-6 768H x 494V (approx. 380K) CCC1380H-6X 752H x 582V (approx. 440K) Sensing Area 3/16 x 1/8 - inch (4.7 mm x 3.5 mm) Synchronization System AC line lock/DC internal Horizontal Resolution CCC1380H-6, CCC1380H-6X 480 TV lines ...

  • Pelco 1/3-Inch CCD Camera - page 15

    C1963M (8/04) 15 PRODUCT W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on the following fixed camera models: CC3701H-2, CC3701H-2X ...

  • Pelco 1/3-Inch CCD Camera - page 16

    Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 ® United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Camera Accessories

Documents that we receive from a manufacturer of a Pelco 1/3-Inch CCD Camera can be divided into several groups. They are, among others:
- Pelco technical drawings
- 1/3-Inch CCD Camera manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco 1/3-Inch CCD Camera
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco 1/3-Inch CCD Camera.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco 1/3-Inch CCD Camera, service manual, brief instructions and user manuals Pelco 1/3-Inch CCD Camera. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco 1/3-Inch CCD Camera.

Similar manuals

A complete manual for the device Pelco 1/3-Inch CCD Camera, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco 1/3-Inch CCD Camera by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco 1/3-Inch CCD Camera.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco 1/3-Inch CCD Camera - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco 1/3-Inch CCD Camera, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco 1/3-Inch CCD Camera, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco 1/3-Inch CCD Camera - which should help us in our first steps of using Pelco 1/3-Inch CCD Camera
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco 1/3-Inch CCD Camera
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco 1/3-Inch CCD Camera in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco 1/3-Inch CCD Camera?

Use the form below

If you did not solve your problem by using a manual Pelco 1/3-Inch CCD Camera, ask a question using the form below. If a user had a similar problem with Pelco 1/3-Inch CCD Camera it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)