Manual Furuno DWF-200M

16 pages 0.33 mb
Download

Go to site of 16

Summary
  • Furuno DWF-200M - page 1

    INSTRUCTION MANUAL First applying the Air Bubble W ashing System in the world. Improving washing performance by more than 35%, while reducing power consumption by 40%. Applying One-Touch Operation System. Realizing calm washing through the innovational low-noise First applying the Radical Technology in the world ... go beyond washing, sterilize you ...

  • Furuno DWF-200M - page 2

    2 WATER TAP ADAPTER INLET HOSE PARTS AND FEATURES DRYTEN (OPTION) COVER UNDER (OPTION) HOSE DRAIN (FOR NON-PUMP) HOSE DRAIN CLAMP HOSE DRAIN (FOR PUMP) CONNECTOR INLET(OPTION) UP DRYTEN The parts and features of your washer are illustrated on this page. Become familiar with all parts and features before using your washer. NOTE • The drawings in t ...

  • Furuno DWF-200M - page 3

    3 Read all instructions before using your washer Save these instructions Your safety is important to us. To reduce the risk of fire, electrical shock, or injury when using your washer, follow basic precautions including the following: Understanding your responsibilities • Do not wash items that are soiled with vegetable or cooking oil. These item ...

  • Furuno DWF-200M - page 4

    4 Non-Pump Model Pump Model Location of washer Check location where washer will be installed. Make sure you have everything necessary for correct installation. Proper installation is your responsibility. • Do not place or store your washer below 0 ˚ C (32 ˚ F) to avoid any damage from freezing. • Install the washer on the horizontal solid flo ...

  • Furuno DWF-200M - page 5

    5 Recommended earthing method WARNING Laundry tub drain system Standpipe drain system Pump Model Non-Pump Model 1 In case that it goes over a door sill. Don’t let the height of the drain hose exceed 20cm from the bottom of washer. 2 In case of extending the drain hose. Don’t let the total length exceed 3m. 3 Be careful that the end of the drain ...

  • Furuno DWF-200M - page 6

    6 Be careful not to confuse hot water inlet and cold water inlet. In using only one water tap or in case of attached one water inlet valve, connect the inlet hose to the cold water inlet valve. For Screw-Shaped Tap For Ordinary Tap INLET HOSE CONNECTION 1 Pull down the collar of the inlet hose to separate it from the water tap adapter. 2 Loosen the ...

  • Furuno DWF-200M - page 7

    7 Loading Sorting Preparing clothes for washing To obtain the best wahing results, you must operate your washer properly. This section gives you this important information. OPERATING YOUR WASHER • Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and other hard objects to avoid scratching the washer interior. ? ...

  • Furuno DWF-200M - page 8

    8 THE FUNCTIONS OF THE CONTROL P ANEL • Press this button to turn the power "ON" or "OFF". • It can be used to choose water temperature to be supplied. • As the button is pressed, water temperature will be repeated. COLD ➝ COLD + HOT ➝ HOT • In case of the single valve model, there is no wash temperature selector fun ...

  • Furuno DWF-200M - page 9

    9 FULL AUTOMATIC COURSE 1. FUZZY COURSE (SENSOR); • This selection is for general washing except extraordinary clothes. • It is possible for changing water temperature what you want. • Artificial brain sensor selects properly the various kind of washing condition such as washing time, rinse times, spin time and water level. 2. BLANKET COURSE; ...

  • Furuno DWF-200M - page 10

    10 GUIDES FOR OTHER USEFUL PROGRAMS Reserved W ashing • Reservation can be made from 2 hours to 48hours. example) T o make reservation to complete washing in 8hours. • Now the reservation is mode. • WOOL course is not selected. • The displaying time shows the finishing time you want. Partial Selection Among W ash, Rinse or Spin REMAIN adjus ...

  • Furuno DWF-200M - page 11

    11 GENERAL PROCEDURE FOR OPERATION 1. Add measured detergent to the washer, (Follow manufacturer’s directions for safe use) 2. OPTIONAL STEP If desired, add measured liquid chlorine bleach to the bleach inlet, use only liquid chlorine in the bleach inlet * Follow manufacturer’s direction for safe use. 4. Close the washer lid (door) 5. Press the ...

  • Furuno DWF-200M - page 12

    12 To winterize washer To use washer again Exterior Interior CARING FOR YOUR WASHER Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Cleaning your washer W inter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in the hose ...

  • Furuno DWF-200M - page 13

    13 HOW TO CLEAN THE FILTER Cleaning the Lint Filter Cleaning the drain filter • In case "Pump-Model" drain hose, this filter’s equipped at the back side of washer. • This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ... • If the drain filter is not cleaned at proper time (every 10 times of ...

  • Furuno DWF-200M - page 14

    14 Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen soil before washing. Stain removal rules • Use warm water for soaking or prewashing stained laundry. Hot water can set stains. • Most stains are easier to r ...

  • Furuno DWF-200M - page 15

    15 PROBLEM CHECK POINT • These cases are not malfunctions • The sound "wing" heard during water supply is the operating sound made by the water inlet valve. • The sound "sha" heard in stopping the tub is the sound that comes from the autobalancer of the tub. • The sound "wung" heard during wash or spin is the o ...

  • Furuno DWF-200M - page 16

    16 MODEL NO. DWF-200M DWF-240M Power Source AC110~127V, 220V/60Hz AC220~240V/50Hz AC100~127V, 220V/60Hz AC220~240V/50Hz Power Consuption 550W 480W 600W 550W Dimension (W ✕ H ✕ D, mm) 630 ✕ 1040 ✕ 670 630 ✕ 1060 ✕ 670 Unit Weight 47kg / 48kg (Pump) 49kg / 50kg (Pump) Standard Water Consumption 250 270 Standard Water Level • HIGH (97 ) ...

Manufacturer Furuno Category Washer

Documents that we receive from a manufacturer of a Furuno DWF-200M can be divided into several groups. They are, among others:
- Furuno technical drawings
- DWF-200M manuals
- Furuno product data sheets
- information booklets
- or energy labels Furuno DWF-200M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Furuno DWF-200M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Furuno DWF-200M, service manual, brief instructions and user manuals Furuno DWF-200M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Furuno DWF-200M.

Similar manuals

A complete manual for the device Furuno DWF-200M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Furuno DWF-200M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Furuno DWF-200M.

A complete Furuno manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Furuno DWF-200M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Furuno DWF-200M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Furuno DWF-200M, that we can find in the current document
3. Tips how to use the basic functions of the device Furuno DWF-200M - which should help us in our first steps of using Furuno DWF-200M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Furuno DWF-200M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Furuno DWF-200M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Furuno DWF-200M?

Use the form below

If you did not solve your problem by using a manual Furuno DWF-200M, ask a question using the form below. If a user had a similar problem with Furuno DWF-200M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)