English dropdown-ico

Manual Cisco Systems C65

76 pages 0.62 mb
Download

Go to site of 76

Summary
  • Cisco Systems C65 - page 1

    CHAPTER 4-1 Cisco 6500/7600 Manager User Guide OL-2209-01 4 Deploying the C65/76M This chapter describes how to deplo y the Cisco 6500/7600 Series Manager, and consists of these sections: • Managing a Catalyst 6000 Family Switch or a Cisco 7600 Series Internet Router , page 4-1 • Deployment and Commissioning Process, page 4-6 Managing a Catalys ...

  • Cisco Systems C65 - page 2

    Chapter 4 Deploying the C65/76M Managing a Catalyst 6000 Family Switch or a Cisco 7600 Series Internet Router 4-2 Cisco 6500/7600 Manager User Guide OL-2209-01 Deploying Objects The deployment process should be done after you install the C65/76M software for the f irst time, or after you install new hardware. Deplo yment informs the C65/ 76M of the ...

  • Cisco Systems C65 - page 3

    4-3 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Managing a Catalyst 6000 Family Switch or a Cisco 7600 Series Internet Router OSM Channelized SONET Modules Ethernet Interfaces OSM Channelized SONET Interfaces OSM Serial Sub-interfaces OSM PoS Sub-interfaces Content Switching Modules Software EtherChannels Syslog EI ...

  • Cisco Systems C65 - page 4

    Chapter 4 Deploying the C65/76M Managing a Catalyst 6000 Family Switch or a Cisco 7600 Series Internet Router 4-4 Cisco 6500/7600 Manager User Guide OL-2209-01 Commissioning Objects Commissioning is the action required to notify CEMF to start activ ely monitoring the object. Only the following C65/76M objects can be commissioned and decommissioned ...

  • Cisco Systems C65 - page 5

    4-5 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Managing a Catalyst 6000 Family Switch or a Cisco 7600 Series Internet Router Under the Network container , the Network Element objects are labelled by their IP addresses and added to the group representing the subnet that they belong to (192.168.12.0). Under the Phys ...

  • Cisco Systems C65 - page 6

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-6 Cisco 6500/7600 Manager User Guide OL-2209-01 Deployment and Commissioning Process There are three methods that can be used to enable CEMF to monitor a Catalyst 6000 family switch or a Cisco 7600 series Internet Router: • IP Auto Discov ery This method should be used to depl ...

  • Cisco Systems C65 - page 7

    4-7 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process IP Auto Discovery The CEMF Auto Discov ery application is used to search an existing network. The network is examined for IP and SNMP devices. An object is created for each ne w de vice discovered. The IP disco very windo w can be ...

  • Cisco Systems C65 - page 8

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-8 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-3 IP Discov ery Window The contents of this window depend on ho w the window was launched. F or example, if this windo w was launched from an object in the physical containment vie w , then the Physical Location parameter ...

  • Cisco Systems C65 - page 9

    4-9 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Note When specifying the SNMP community string, use the read-write community string for the switch. If the read community string is used or appears f irst in the list of community strings, then that will be the SNMP community strin ...

  • Cisco Systems C65 - page 10

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-10 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-4 Map View er with a Newly Discov er ed Catalyst 6500 Switch After the Network Element and Software objects ha ve been created by the Auto Discov ery process, their contents need to be determined. This determination is m ...

  • Cisco Systems C65 - page 11

    4-11 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-5 Networ k Element Dialog Box When the dialog box is displayed, select the Conf iguration tab . In the CLI Passwords section, specify the T elnet Passw ord and Enable Password parameters. The T elnet Password is the pass ...

  • Cisco Systems C65 - page 12

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-12 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-6 SNMP T ab in the Networ k Element Dialog Box Click the Commission button from the Conf iguration tab ( Figure 4-5 ) to start the subchassis discov ery process, which allows the C65/76M to determine which modules are in ...

  • Cisco Systems C65 - page 13

    4-13 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-7 Fully IP -Discov er ed and Commissioned Catalyst 6513 Switc h Manual Deployment The manual deployment method is used when discov ery of the entire network is not needed and the specif ic IP address and type of device t ...

  • Cisco Systems C65 - page 14

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-14 Cisco 6500/7600 Manager User Guide OL-2209-01 Choose Deployment > Deploy Catalyst 6500 Manager from the pop-up menu. This pop-up menu item, shown in Figure 4-8 , is av ailable from the Site level in the Physical container and at the top lev el of the Catalyst6500Manager co ...

  • Cisco Systems C65 - page 15

    4-15 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process When you select this item, the Deployment W izard window sho wn in Figure 4-9 is displayed. Figur e 4-9 Deployment Wizar d—T emplates Property Description Catalyst 6500 Switch Network Element Only (Auto-discov ered chassis) This ...

  • Cisco Systems C65 - page 16

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-16 Cisco 6500/7600 Manager User Guide OL-2209-01 Choose the Catalyst 6500 Switch Network Element Only option and click the F orward button. The Object P arameters window , shown in Figure 4-10 , is displayed. T ips The Catalyst 6500 Switch Network Element and Chassis option is u ...

  • Cisco Systems C65 - page 17

    4-17 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Enter the number of Catalyst 6500 series switches or Cisco 7600 series Internet Routers that you want to deploy at the same time and click the Forward b utton. The remaining screens of this wizard are displayed for each switch or ...

  • Cisco Systems C65 - page 18

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-18 Cisco 6500/7600 Manager User Guide OL-2209-01 Enter the details for this window and then click the F orward button. The V iews windo w , shown in Figure 4-12 , may be displayed if the system requires a selection of the “location” of the network element within the physical ...

  • Cisco Systems C65 - page 19

    4-19 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Note The Network Element object can be deployed and commissioned without the IOS T elnet or enable passwords being set. Ho wev er , some of the attrib utes will hav e the v alue of “ERR OR” because those values are retrie ved ...

  • Cisco Systems C65 - page 20

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-20 Cisco 6500/7600 Manager User Guide OL-2209-01 If the wizard was launched from a Site object in the Physical containment vie w , this screen will not be displayed, and the Physical parameter is set automatically . If this wizard is launched from any other containment vie w , t ...

  • Cisco Systems C65 - page 21

    4-21 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-14 Deployment Wizar d—Summary Y ou can either cancel the operation by clicking Cancel or click Finish to create the object. If you click the Finish button, the Netw ork Element and Software objects are added to the Map ...

  • Cisco Systems C65 - page 22

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-22 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-15 Networ k Element Dialog Box Click the Commission button from the Conf iguration tab to start the subchassis discov ery , which allows the C65/76M to determine which modules are installed on the switch or router , and ...

  • Cisco Systems C65 - page 23

    4-23 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-16 Manually Deploy ed and Commissioned Catalyst 6506 Switc h If an error is encountered when the object is commissioned, the Network Element object might go into the Mismatched or Lostcomms state and an alarm would be ra ...

  • Cisco Systems C65 - page 24

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-24 Cisco 6500/7600 Manager User Guide OL-2209-01 Predeployment This deployment option is used to deploy the Catalyst 6000 family switch or Cisco 7600 series Internet Router into CEMF before it has been attached to the network. After an object has been predeployed, CEMF k eeps th ...

  • Cisco Systems C65 - page 25

    4-25 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-17 Manually Deploying a C65/7 6M Object When you choose the Deployment > Deploy Catalyst 6500 Manager option, the Deployment W izard—T emplates window , shown in Figure 4-18 , is displayed. ...

  • Cisco Systems C65 - page 26

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-26 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-18 Deployment Wizar d—T emplates Property Description Catalyst 6500 Switch Network Element Only (Auto-discov ered chassis) This option deploys the Network Element and Software objects. Used when you want to perform a s ...

  • Cisco Systems C65 - page 27

    4-27 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Choose the Catalyst 6500 Switch Network Element and Chassis option and click the Forward b utton. The Object Parameters windo w , sho wn in Figure 4-19 , is displayed. T ips The Catalyst 6500 Switch Network Element Only option is ...

  • Cisco Systems C65 - page 28

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-28 Cisco 6500/7600 Manager User Guide OL-2209-01 Enter the number of Catalyst 6500 series switches or Cisco 7600 series Internet Routers that you want to predeploy at the same time and click the Forward button. The detailed Object P arameters windo w , shown in Figure 4-20 , is ...

  • Cisco Systems C65 - page 29

    4-29 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Enter the details for the switch and then click the Forward button. The V iews windo w may be displayed if the system requires a selection of the “location” of the network element within the physical hierarchy (see Figure 4-21 ...

  • Cisco Systems C65 - page 30

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-30 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-21 Deployment Wizar d—Views If this wizard was launched from a site in the Physical containment vie w , this screen will not be displayed. In this case, the Physical parameter is set automatically . If this wizard is l ...

  • Cisco Systems C65 - page 31

    4-31 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-22 Ph ysical Location Selection Click the A pply button when the Physical containment has been selected. The Object Parameters windo w , shown in Figure 4-23 , is displayed. ...

  • Cisco Systems C65 - page 32

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-32 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-23 Deployment Wizar d—Object P aramet ers Property Description Catalyst 6500 Chassis Name Label that is used for the Chassis object in the Map V iewer . Chassis T ype This value specif ies the type of chassis to deploy ...

  • Cisco Systems C65 - page 33

    4-33 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Note If you are deploying a Catalyst 6000 series switch, the follo wing chassis types will be displayed in the Chassis T ype drop down menu. Note If you are deploying a Cisco 7600 series Internet Router , the following chassis typ ...

  • Cisco Systems C65 - page 34

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-34 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-24 Deployment Wizar d—Summary Y ou can either cancel the operation by clicking the Cancel button, or click the Finish button to create the object. If you click the Finish button, the Netw ork Element, Chassis, and Soft ...

  • Cisco Systems C65 - page 35

    4-35 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-25 Pr edeploy ed Catalyst 6509 Chassis Object ...

  • Cisco Systems C65 - page 36

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-36 Cisco 6500/7600 Manager User Guide OL-2209-01 Predeploying Subchassis Modules The next step in predeplo ying a Catalyst 6000 family switch or a Cisco 7600 series Internet Router in CEMF is to deploy the modules within the chassis. The following subchassis objects can be prede ...

  • Cisco Systems C65 - page 37

    4-37 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-26 Pr edeploying Supervisor Modules The Supervisor Module Deployment W izard—Object Parameters window , as sho wn in Figure 4-27 , is displayed. ...

  • Cisco Systems C65 - page 38

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-38 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-27 Supervisor Module Deployment Wizar d—Object P aramet ers Enter the number of supervisor modules to predeploy and click the Forward button. The Supervisor Module Deplo yment W izard—Object Parameters Details windo ...

  • Cisco Systems C65 - page 39

    4-39 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-28 Supervisor Module Deployment Wizar d—Object P aramet ers Details ...

  • Cisco Systems C65 - page 40

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-40 Cisco 6500/7600 Manager User Guide OL-2209-01 Note Use ws-x6k-s1a-msfc2 to deploy both the Supervisor Engine 1A with MSFC or Supervisor Engine 1A with MSFC2. Note Use ws-x6k-s2-msfc2 to deploy the Supervisor Engine 2 with 256 MB DRAM and MSFC2 (ws-x6k-s2u-msfc2). Enter the de ...

  • Cisco Systems C65 - page 41

    4-41 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-29 Supervisor Module Deployment Wizar d—Summary Y ou can either click the Cancel button to cancel the operation, or click the Finish button to create the object. If the Chassis Slot Number corresponds to an occupied sl ...

  • Cisco Systems C65 - page 42

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-42 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-30 Pr edeployment F ailure Due to an Occupied Slot Ethernet Module T o predeploy an Ethernet module (standard Ethernet, Fast Ethernet, or Gigabit Ethernet), choose the Deployment > Deploy Ethernet Module(s) option fro ...

  • Cisco Systems C65 - page 43

    4-43 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-31 Pr edeploying Ether net Modules ...

  • Cisco Systems C65 - page 44

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-44 Cisco 6500/7600 Manager User Guide OL-2209-01 After you choose the Deploy Ethernet Module option, the windo w sho wn in Figure 4-32 is displayed. Figur e 4-32 Ether net Module Deployment Wizar d—Object P ar ameters Enter the number of Ethernet module objects to be predeploy ...

  • Cisco Systems C65 - page 45

    4-45 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-33 Ether net Module Deployment Wizar d—Object P ar ameters Details Property Description Module Name The name gi ven to the Ethernet Module object. Module T ype The type of Ethernet card to be deployed. This is a drop-d ...

  • Cisco Systems C65 - page 46

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-46 Cisco 6500/7600 Manager User Guide OL-2209-01 Enter the details for the Ethernet Module object and click the F orward button. The Ethernet Module Deployment W izard—Summary window is displayed (see Figure 4-34 ). Module T ype (continued) • wsx6248atel—48-port 10/100TX w ...

  • Cisco Systems C65 - page 47

    4-47 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-34 Ether net Module Deployment Wizar d—Summary Y ou can either click the Cancel button to cancel the operation or click the Finish button to create the object. If the Chassis Slot Number corresponds to an occupied slot ...

  • Cisco Systems C65 - page 48

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-48 Cisco 6500/7600 Manager User Guide OL-2209-01 Switch Fabric Module T o predeploy a Switch Fabric Module, choose the Deployment > Deploy Supervisor/Contr ol Module(s) option in the pop-up menu from the Chassis object (see Figure 4-35 ). Figur e 4-35 Pr edeploying S witch F ...

  • Cisco Systems C65 - page 49

    4-49 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process After you choose the Deploy Switch F abric Module(s) option, the Switch Fabric Module Deployment W izard—Object Parameters windo w is displayed (see Figure 4-36 ). Figur e 4-36 Switc h F abr ic Module Deplo yment Wizard—Object ...

  • Cisco Systems C65 - page 50

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-50 Cisco 6500/7600 Manager User Guide OL-2209-01 Enter the number of Switch Fabric Modules to be deployed at the same time and click the Forward b utton. The Switch Fabric Module Deployment W izard—Object Parameters Details windo w is displayed for each module to deploy (see F ...

  • Cisco Systems C65 - page 51

    4-51 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Enter the details for the Switch Fabric Module object and click the Forward button. The Switch F abric Module Deployment W izard—Summary window is displayed (see Figure 4-38 ). Property Description Module Name The name giv en to ...

  • Cisco Systems C65 - page 52

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-52 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-38 Switc h F abr ic Module Deplo yment Wizard—Summary Y ou can either click the Cancel button to cancel the operation or click the Finish button to create the object. If the Chassis Slot Number corresponds to an occupi ...

  • Cisco Systems C65 - page 53

    4-53 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process FlexWAN Module T o predeploy a FlexW AN Module, choose the Deployment > Deploy Supervisor/ Control Module(s) option in the pop-up menu from the Chassis object (see Figure 4-39 ). Figur e 4-39 Pr edeploying FlexW AN Modules Afte ...

  • Cisco Systems C65 - page 54

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-54 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-40 FlexW AN Module Deployment Wizar d—Object P aramet ers Enter the number of FlexW AN modules to be deployed at the same time and click F orward button. The FlexW AN Module Deployment W izard – Object Parameters Det ...

  • Cisco Systems C65 - page 55

    4-55 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-41 FlexW AN Module Deployment Wizar d—Object P aramet ers Details Property Description Module Name The name giv en to the FlexW AN Module object. Module T ype The type of FlexW AN Module to be deployed. This is a drop- ...

  • Cisco Systems C65 - page 56

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-56 Cisco 6500/7600 Manager User Guide OL-2209-01 Enter the details for the FlexW AN Module object and click the F orward button. The FlexW AN Module Deployment W izard—Summary window is displayed (see Figure 4-42 ). Figur e 4-42 FlexW AN Module Deployment Wizar d—Summary Y o ...

  • Cisco Systems C65 - page 57

    4-57 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Port Adapters T o predeploy a port adapter , the FlexW AN module must f irst be deployed (see the “FlexW AN Module” section on page 4-53 ). Choose the Deployment > Deploy Port Adapter(s) option in the pop-up menu from the F ...

  • Cisco Systems C65 - page 58

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-58 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-44 P ort A dapter Deplo yment Wizar d—Object P aramet ers Enter the number of port adapters to be deployed at the same time and click F orward button. The Port Adapter Deployment W izard – Object Parameters Details w ...

  • Cisco Systems C65 - page 59

    4-59 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-45 P ort A dapter Deplo yment Wizar d—Object P aramet ers Details ...

  • Cisco Systems C65 - page 60

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-60 Cisco 6500/7600 Manager User Guide OL-2209-01 Property Description Port Adapter Name The name giv en to the Port Adapter object. Port Adapter T ype The type of port adapter to be deployed. This is a drop-down list with the follo wing values: • pa-ah1t • pa-ah2t • pa-4t- ...

  • Cisco Systems C65 - page 61

    4-61 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Note V alid FlexW AN bay numbers are 0 or 1. If you enter any other number , an error message is displayed and the F orward button will not work. Enter the details for the Port Adapter object and click the Forward button. The Port ...

  • Cisco Systems C65 - page 62

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-62 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-46 P ort A dapter Deplo yment Wizar d—Summary Y ou can either click the Cancel button to cancel the operation or click the Finish button to create the object. If the Chassis slot number corresponds to an occupied slot, ...

  • Cisco Systems C65 - page 63

    4-63 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Content Switching Module The Content Switching Module is a line card that provides serv er load balancing (SLB) of client traff ic to server farms, f irew alls, secure sockets layer (SSL) de vices, or VPN termination devices. T o ...

  • Cisco Systems C65 - page 64

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-64 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-48 Deployment Wizar d—Object P aramet ers Enter the number of Content Switching Modules to be deployed at the same time and click Forward b utton. The Deployment W izard—Object Parameters Details window is displayed ...

  • Cisco Systems C65 - page 65

    4-65 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Note The C65/76M manager supports management and conf iguration of the CSM if only one CSM is deployed. If you choose to deploy more than one CSM in the chassis, in ventory of the CSMs are supported, b ut the management and conf i ...

  • Cisco Systems C65 - page 66

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-66 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-49 Deployment Wizar d—Object P aramet ers Details Property Description Module Name The name giv en to the Content Switching Module object. Module T ype The type of Content Switching Module to be deployed. This is a dro ...

  • Cisco Systems C65 - page 67

    4-67 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Enter the details for the Content Switching Module object and click the F orward button. The Deplo yment W izard—Summary windo w is displayed (see Figure 4-50 ). Figur e 4-50 Deployment Wizar d—Summary Y ou can either click th ...

  • Cisco Systems C65 - page 68

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-68 Cisco 6500/7600 Manager User Guide OL-2209-01 Optical Services Module T o predeploy an Optical Services Module (OSM), choose the Deploy Module(s), Deploy OSM Module option in the pop-up menu from the Chassis object (see Figure 4-51 ). Figur e 4-51 Pr edeploying OSM Modules Af ...

  • Cisco Systems C65 - page 69

    4-69 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Figur e 4-52 OSM Module Deployment Wizar d—Object P aramet ers Enter the number of OSMs to be deployed at the same time and click Forward button. The Deplo yment W izard—Object Parameters Details windo w is displayed for each ...

  • Cisco Systems C65 - page 70

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-70 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-53 OSM Module Deployment Wizar d—Object P aramet ers Details ...

  • Cisco Systems C65 - page 71

    4-71 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Property Description Module Name The name giv en to the OSM object. Module T ype The type of OSM to be deployed. This is a drop-down list with the follo wing values: • osm-4ge-wan-gbic—4-port Gigabit Ethernet Optical Services ...

  • Cisco Systems C65 - page 72

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-72 Cisco 6500/7600 Manager User Guide OL-2209-01 Module T ype (continued) • osm-16oc3-pos-sl—16-port OC-3/STM-1 SONET/SDH OSM, SM-LR, with 4 ports of Gigabit Ethernet • osm-2oc12-pos-mm—2-port OC-12/STM-4 SONET/SDH OSM, MM, with 4 ports of Gigabit Ethernet • osm-2oc12- ...

  • Cisco Systems C65 - page 73

    4-73 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Enter the details for the OSM object and click the Forward button. The Deployment W izard—Summary window is displayed (see Figure 4-54 ). Module T ype (continued) • osm-2choc48/t3-si—2-port channelized OC-48, SM-IR, with 4 p ...

  • Cisco Systems C65 - page 74

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-74 Cisco 6500/7600 Manager User Guide OL-2209-01 Figur e 4-54 OSM Deployment Wizar d—Summary Y ou can either click the Cancel button to cancel the operation or click the Finish button to create the object. If the Chassis slot number corresponds to an occupied slot, an error me ...

  • Cisco Systems C65 - page 75

    4-75 Cisco 6500/7600 Manager User Guide OL-2209-01 Chapter 4 Deploying the C65/76M Deployment and Commissioning Process Commissioning Predeployed Objects A predeployed Network Element and subobjects are commissioned automatically when a coldStart SNMP trap that is issued from the switch or the router is recei ved by the CEMF server . Note For the a ...

  • Cisco Systems C65 - page 76

    Chapter 4 Deploying the C65/76M Deployment and Commissioning Process 4-76 Cisco 6500/7600 Manager User Guide OL-2209-01 ...

Manufacturer Cisco Systems Category Network Router

Documents that we receive from a manufacturer of a Cisco Systems C65 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- C65 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems C65
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems C65.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems C65, service manual, brief instructions and user manuals Cisco Systems C65. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems C65.

Similar manuals

A complete manual for the device Cisco Systems C65, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems C65 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems C65.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems C65 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems C65, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems C65, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems C65 - which should help us in our first steps of using Cisco Systems C65
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems C65
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems C65 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems C65?

Use the form below

If you did not solve your problem by using a manual Cisco Systems C65, ask a question using the form below. If a user had a similar problem with Cisco Systems C65 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)