English dropdown-ico

Manual Polycom 4400

23 pages 0.8 mb
Download

Go to site of 23

Summary
  • Polycom 4400 - page 1

    VIEW Certified Configuration Guide Cisco 4400 Series Wireless LAN Controller (WLC), Wireless Integrated Serv ices Module (WiSM), and 3750G Integrated Wireless LAN Controller with 1100, 1130, 1200, 1230 and 1240 Series APs March 2009 Edition 1725-36070-001 Version P ...

  • Polycom 4400 - page 2

    Con fig ura tio n Gu ide Trademark Information Polycom® and t he logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various co untries. All other trademark s used herein are the propert y of their respective owners. Patent Information The accompanyin ...

  • Polycom 4400 - page 3

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs Introduction Polycom's Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and Wireless LAN infrastructure products. The products listed ...

  • Polycom 4400 - page 4

    Con fig ura tio n Gu ide Known Limitations • Wi-Fi Multimedia ( WMM ) must be disabled in order for SpectraLink Wireless Telephones to work properly. • Heavy multicast, broadcast, or push-to-talk ( PTT ) traffic may impair voice quality. • The Cisco 1000 series APs are not VIEW Certified at this time. • Voice and data must be separated onto ...

  • Polycom 4400 - page 5

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs Network Topology The following configuration was tested during VIEW Certification. It is important to note that this configuration is not necessar ily applicable to all customer environments. SpectraLink 8000 Wireless Telephones SpectraLink 8000 SVP Server SpectraLi ...

  • Polycom 4400 - page 6

    Con fig ura tio n Gu ide Configuring a New Controller Starting from Factory Defaults 1. Initial provisioning of the controller is done via the command line interface (CLI). Connect a null modem serial cable between the console port of the controller and the serial port of a PC. 2. Open a terminal program, such as Hyper Terminal, and configure the p ...

  • Polycom 4400 - page 7

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs Connecting to the Controller via a Browser 1. Connect to the WLC by pointing your internet browser to the URL: https<IP_Addr> (where <IP_Addr> is the IP address of the management interface of the WLC). 2. Click the Login prompt. The default User Name and ...

  • Polycom 4400 - page 8

    Con fig ura tio n Gu ide Installing Software 1. Make sure that the VIEW Certified version of software is installed on the controller. From the main menu, click Monitor . 2. In the navigation pane, click Summary. The heading labeled Software Version shows the current software version. 3. Download the appropriate software for your model of controller ...

  • Polycom 4400 - page 9

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs Controller Setup The initial setup of the controller is shown below. The setup instructions outlined in this document are for the configuration shown in the diagram only. Your configuration may differ, and the appropriate adjustments must be made. It is not necessar ...

  • Polycom 4400 - page 10

    Con fig ura tio n Gu ide Connecting APs As the APs are connected to the ne t work, they should automatically find the controller via the LW APP discovery algorithms. The Dynamic Host Configuration Protocol (DHCP) server will assign each AP an IP address. You can configure a DHCP server to run on a remote PC for a small deployment. However, for larg ...

  • Polycom 4400 - page 11

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs 4. Under DHCP Information, enter the IP address of the Primary DHCP Server. 5. Repeat this step for the ap-manager interface. 6. Click the Apply button and save the changes. PN: 1725-36070-001_P.doc 11 ...

  • Polycom 4400 - page 12

    Con fig ura tio n Gu ide AP Configuration 1. Power-on and connect the APs to the network. Wait a few minutes for the APs to find the controller. 2. Verify the APs are associated to the WLC. 3. From the main menu, click Monitor. Configuration for SpectraLink Wireless Telephones running in 802.11b mode 1. From the main menu, click Wireless . 2. In th ...

  • Polycom 4400 - page 13

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs 4. Set Admin Status to Enable . 5. Configure any other settings that might be relevant to your deployment as needed. 6. Click the Apply button to save all changes. 7. In the navigation pane under 802.11b/g/n, select Network. 8. Set 802.11b/g Network Status to Disabl ...

  • Polycom 4400 - page 14

    Con fig ura tio n Gu ide require the following minimum dBm reading to support the corresponding Mandatory data rate setting in the access point. 802.11 Radio Standard Minimum Available Signal Strength (RSSI) Maximum “Mandatory ” Data Rate -70 dBm 1 Mb/s 802.11b -60 dBm 11 Mb/s -60 dBm 6 Mb/s 802.11a -45 dBm 54 Mb/s For additional details on RF ...

  • Polycom 4400 - page 15

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs 9. Use the default Fragmentation Threshold (2346 bytes). 10. Set the Beacon Period to 100. 11. Set DTIM Peri od to 2 . 12. SpectraLink Wireless Telephones do not support dynamic power and will not utilize the information element that is set when DTPC Support is enab ...

  • Polycom 4400 - page 16

    Con fig ura tio n Gu ide Configuration for SpectraLink Wireless Telephones running in 802.11a mode 1. From the main menu, click Wireless. 2. In the navigation pane, under Access Points sele ct Radios , then select 802.11a /n. All the APs that are connected should be listed, showing their Operational Status as UP . 3. Select Configure from the drop- ...

  • Polycom 4400 - page 17

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs 4. Set Admin Status to Enab le . 5. Configure any other settings that might be relevant to your deployment as needed. 6. Click the Apply button to save all changes. 7. In the navigation pane under 802.11a/n, select Network. 8. Set 802.11a Network Status to Disable ; ...

  • Polycom 4400 - page 18

    Con fig ura tio n Gu ide 10. Use the default Fragmentation Threshold (2346 bytes). 11. Set the Beacon Period to 100 . 12. Set DTIM Peri od to 2 . 13. SpectraLink Wireless Telephones do not support dynamic power and will not utilize the information element that is set when DTPC support is enabled. Handset power should be configured to match the high ...

  • Polycom 4400 - page 19

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs 15. In the navigation pane under 802.11a/n, select EDCA Parameters. 16. Select Spectralink Voice Priority from the drop-down list. 17. Click the Apply button t o save the settings. 18. In the navigation pane under 802.11a /n, select Network. 19. For 802.11a Net work ...

  • Polycom 4400 - page 20

    Con fig ura tio n Gu ide Setting Up the SSIDs It is required for voice and data to be on separate SSIDs to prioritize voice traffic. The voice SSID must be set to Platinum for Quality of Service (as shown in the screen shot below) and the data SSID must be set to Silver for Quality of Service . Setting up the voice SSID 1. From the main menu, click ...

  • Polycom 4400 - page 21

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs 5. Under the Profile Name heading, s elect the new Voice WLAN Profile. 6. Under the General tab , verify the Radio Policy corresponds to the SpectraLink Wireless Telephone configuration. a. For SpectraLink e340/h340/i640 Wireless Telephones: • The Radio Policy sho ...

  • Polycom 4400 - page 22

    Con fig ura tio n Gu ide 8. Under the Security tab, select the desired security policy (either WPA or WPA2) and enter all required options. 9. Under the QoS tab, set Quality of Service to Platin um (voice ). (Note: This is the required setting for voice traffic.) 10. Set WMM Policy to Disabled. (Note: This is required for usage with SpectraLink Wir ...

  • Polycom 4400 - page 23

    Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs Further Assistance 1. An installation and configuration guide for the 4400 WLC can be found on Cisco’s website: http://www.cisco.com/en/US/docs/wireless/controller/5.0/co nfiguration/guide/ccg50.html 2. To convert the 1200 series autono mous AP to an LWAPP, go to: ...

Manufacturer Polycom Category Network Card

Documents that we receive from a manufacturer of a Polycom 4400 can be divided into several groups. They are, among others:
- Polycom technical drawings
- 4400 manuals
- Polycom product data sheets
- information booklets
- or energy labels Polycom 4400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Polycom 4400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Polycom 4400, service manual, brief instructions and user manuals Polycom 4400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Polycom 4400.

Similar manuals

A complete manual for the device Polycom 4400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Polycom 4400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Polycom 4400.

A complete Polycom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Polycom 4400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Polycom 4400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Polycom 4400, that we can find in the current document
3. Tips how to use the basic functions of the device Polycom 4400 - which should help us in our first steps of using Polycom 4400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Polycom 4400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Polycom 4400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Polycom 4400?

Use the form below

If you did not solve your problem by using a manual Polycom 4400, ask a question using the form below. If a user had a similar problem with Polycom 4400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)