English dropdown-ico

Manual Cisco Systems OL-5742-01

136 pages 0.87 mb
Download

Go to site of 136

Summary
  • Cisco Systems OL-5742-01 - page 1

    C-1 Cisco Signaling Gateway Manager User Guide OL-5742-01 APPENDIX C SGM Command Reference This appendix pro vides the format and a brief description of the follo win g SGM commands, listed alphabet ically . Each comma n d is av ailable in both Solaris and W indows, ex cept as indicated. • sgm, page C-7 • sgm ?, page C-7 • sgm accstats, page ...

  • Cisco Systems OL-5742-01 - page 2

    Appendix C SGM Command Reference C-2 Cisco Signaling Gateway Manager User Guide OL-5742-01 • sgm cleandb, page C-19 • sgm cleandisco ver , page C-20 • sgm cliconntimer , page C-21 • sgm client, pa ge C-22 • sgm clientlo gs, page C- 22 • sgm clitimeout, page C- 23 • sgm cmdlog, page C-24 • sgm console, page C-24 • sgm countas, pa g ...

  • Cisco Systems OL-5742-01 - page 3

    C-3 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference • sgm gttcli ent, page C-37 • sgm gttdir, page C-37 • sgm gttstats, page C-39 • sgm help, page C -41 • sgm inacti veuserday s, page C-42 • sgm installlog, page C-43 • sgm iosinfo, pag e C-43 • sgm ipaccess, page C-44 • sgm jspport, page C-45 ...

  • Cisco Systems OL-5742-01 - page 4

    Appendix C SGM Command Reference C-4 Cisco Signaling Gateway Manager User Guide OL-5742-01 • sgm newle vel, page C-62 • sgm passwordage, page C-63 • sgm patchlog , page C-64 • sgm pcformat, page C-64 • sgm pclist, page C-65 • sgm poll, page C-66 • sgm pollertimeout, page C-66 • sgm print, page C-67 • sgm props, page C-67 • sgm p ...

  • Cisco Systems OL-5742-01 - page 5

    C-5 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference • sgm setpath, pa ge C-82 • sgm snmpcomm, page C-84 • sgm snmpconf, page C-84 • sgm snmpget, page C-85 • sgm snmphelp, page C-88 • sgm snmpnext, page C-89 • sgm snmpwalk, page C-92 • sgm sounddir , page C-96 • sgm ssl, page C-98 • sgm ssls ...

  • Cisco Systems OL-5742-01 - page 6

    Appendix C SGM Command Reference C-6 Cisco Signaling Gateway Manager User Guide OL-5742-01 • sgm statreps nullcaps, page C-111 • sgm statreps servratio, page C-112 • sgm statreps status, page C-112 • sgm statreps timemode, page C-11 3 • sgm statreps timer , page C-113 • sgm statreps utilrat io, page C-114 • sgm statreps xua, page C-11 ...

  • Cisco Systems OL-5742-01 - page 7

    C-7 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm • sgm webaccesslog, page C-128 • sgm weberrorlog, page C-129 • sgm weblogupdate, page C-129 • sgm webnames, page C-130 • sgm webport, page C -131 • sgm webu til, page C-131 • sgm who, page C-132 • sgm xtermpath, page C-132 • sgm xuastats ...

  • Cisco Systems OL-5742-01 - page 8

    Appendix C SGM Command Reference sgm accstats C-8 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm accstats Solaris Only Full S yntax sgm accstats [ node-list [ id-tag ]] [ sort-option ] [ quiet ] Command Description Generates SGM accounting statistics repor ts for links and linkse ...

  • Cisco Systems OL-5742-01 - page 9

    C-9 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm accstats If you specify a node-lis t , you can also specify an id-tag to identify the reports. The id-tag can be any meaningful character string, but it cannot contain any spaces. The default v alue for id-tag is the process ID of the sgm accstats command ...

  • Cisco Systems OL-5742-01 - page 10

    Appendix C SGM Command Reference sgm adduser C-10 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm adduser Solaris Only Full S yntax sgm adduser [ username ] Command Description If SGM User-Based Access is enabled, adds the specified user to the authentic ation list. When you add a ...

  • Cisco Systems OL-5742-01 - page 11

    C-11 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm authtype List of SGM Commands • SGM Command Reference, page C-1 . sgm authtype Solaris Only Full S yntax sgm authtype [ local | solaris ] Command Description Config ures SGM security authenticati on, as follo ws: • local —Allows creation of user ac ...

  • Cisco Systems OL-5742-01 - page 12

    Appendix C SGM Command Reference sgm backup C-12 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm backup Solaris Only Command Description Backs up SGM data files to the SGM installat ion directo ry . SGM auto matically backs up all data f iles at 1:30 AM each night, b ut you can use this command to back up the f iles at an y other time. ? ...

  • Cisco Systems OL-5742-01 - page 13

    C-13 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm badloginalarm If you specify a ne w directory that does not exist, SGM do es not change the directory , and issues an appropriate message. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Comma ...

  • Cisco Systems OL-5742-01 - page 14

    Appendix C SGM Command Reference sgm badlogindisa ble C-14 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm badlogindisable Solaris Only Full S yntax sgm badlogindisable [ number -of-attempts | clear ] Command Description If SGM User-Based Access is enabled, num be r of unsuccessfu ...

  • Cisco Systems OL-5742-01 - page 15

    C-15 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm browserpath sgm browserpath Solaris Only Command Description Sets a user-def ined SGM W eb bro wser pa th, and verifies that the browser specified b y the user exists. Y ou must be logged in as the root u ser (not as a super user) to use this command. Li ...

  • Cisco Systems OL-5742-01 - page 16

    Appendix C SGM Command Reference sgm certtool C-16 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm certtool Full S yntax sgm certtool [ clear | delete alias | export alias [ -f ile filename ] | import alias [ -file fil e na m e ] | list ] Command Description If Secure Sockets Layer (SSL) i s imple mented in your SGM system, enable s you t ...

  • Cisco Systems OL-5742-01 - page 17

    C-17 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm changes sgm changes Solaris Only Command Description Displays th e contents of th e SGM CHANG ES file. The CHANGES file lists all bugs that hav e been resolved in SGM, so rted by release, from the current release back to Rele ase 2.2. • If you installe ...

  • Cisco Systems OL-5742-01 - page 18

    Appendix C SGM Command Reference sgm checkroute C-18 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm checkroute Solaris Only Full S yntax sgm checkroute [ -l l ogf ilename ] fil ename signalingp ointname Command Description Checks the semantics and syntax of the spec ified route table file on the specified signaling po int. T o write deta ...

  • Cisco Systems OL-5742-01 - page 19

    C-19 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm cleanall sgm cleanall Solaris Only Command Description Remove s all SGM data from the SGM server , including message log fi les, backup files, repo rt fil es, configurati on settin gs, and security sett ings. This command restores the SGM serv er to a ? ...

  • Cisco Systems OL-5742-01 - page 20

    Appendix C SGM Command Reference sgm cleandiscover C-20 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm cleandiscover Solaris Only Full S yntax sgm cleandiscover [ seed-node ] [ seed-node ]... Command Description Enables you to delete all cu rrent network data and begin a cle an d ...

  • Cisco Systems OL-5742-01 - page 21

    C-21 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm cliconntimer sgm cliconntimer Solaris Only Full S yntax sgm cliconntimer [ number-of-seconds | clear ] Command Description Specif ies ho w long, in seconds, an SGM client is to w ait for a message from the SGM server before e xiting. If the timer e xpire ...

  • Cisco Systems OL-5742-01 - page 22

    Appendix C SGM Command Reference sgm client C-22 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm client Solaris Only Full S yntax sgm client [ hostname ] Command Description Starts an SGM client on the specif ied host. If no host name is sp ecified, starts an SGM client on the def ault host, as speci fied dur ing instal lation. See the ? ...

  • Cisco Systems OL-5742-01 - page 23

    C-23 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm clitimeout List of SGM Commands • SGM Command Reference, page C-1 . sgm clitimeout Solaris Only Full S yntax sgm clitimeout [ number-of-m inutes | clear ] Command Description Specif ies ho w long, in minutes, an SGM client can be inacti ve before being ...

  • Cisco Systems OL-5742-01 - page 24

    Appendix C SGM Command Reference sgm cmdlog C-24 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm cmdlog Solaris Only Full S yntax sgm cmdlog [ clear | -r ] Command Description Uses P A GER to display the contents of the system command log. The system command log lists all sgm commands that hav e been entered for the SGM server , the time ...

  • Cisco Systems OL-5742-01 - page 25

    C-25 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm countas sgm countas Solaris Only Command Description Displays a count of application serv ers in the current SGM database. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, pa ...

  • Cisco Systems OL-5742-01 - page 26

    Appendix C SGM Command Reference sgm countlinks C-26 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm countlinks Solaris Only Command Description Displays a count of links i n the current SGM database. Y ou must be logged in as th e root user or as a super user to use this command. ...

  • Cisco Systems OL-5742-01 - page 27

    C-27 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm countobjects Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm countobjects Solaris Only Command Description Displays a co unt of all object s in the current SG ...

  • Cisco Systems OL-5742-01 - page 28

    Appendix C SGM Command Reference sgm countsgmp C-28 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm countsgmp Solaris Only Command Description Displays a count of signaling gate way mated pairs in the current S GM database. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Comman ...

  • Cisco Systems OL-5742-01 - page 29

    C-29 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm delete sgm delete Solaris Only Full S yntax sgm delete [ all | node [ all | node [ node ]...] | sp [ all | poin t-code : net [ point-code : net ]...] | linkset [ all | node / linkset [ node / linkset ]...] Command Description Deletes objects from the SGM ...

  • Cisco Systems OL-5742-01 - page 30

    Appendix C SGM Command Reference sgm deluser C-30 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm deluser Solaris Only Full S yntax sgm deluser [ username ] Command Description If SGM User-Based Access is enabled, deletes the specif ied user from the authentication list . T o add the user back to the list, use the sgm adduser command. See ...

  • Cisco Systems OL-5742-01 - page 31

    C-31 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm disableuser If sgm authtype is set to sola ris , you can not use this command. Inst ead, you must manage passwords on the e xternal authentication serv ers. See the “Manually Disabling Users and Pass words (Solaris Only)” section on page 18-14 for mo ...

  • Cisco Systems OL-5742-01 - page 32

    Appendix C SGM Command Reference sgm discover C-32 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm discover Solaris Only Full S yntax sgm discover [ seed-node ] [ seed-node ]... Command Description Enables you to discover the ITP network from the command line. Use the seed-node ar ...

  • Cisco Systems OL-5742-01 - page 33

    C-33 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm enableuser sgm enableuser Solaris Only Full S yntax sgm enableuser [ username ] Command Description If SGM User-Based Access is enabled, re-enables the specified user’ s authentication, whi ch had been disabled either automati cally b y SGM or by a sup ...

  • Cisco Systems OL-5742-01 - page 34

    Appendix C SGM Command Reference sgm eventeditor C-34 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm eventeditor Solaris Only Full S yntax sgm ev enteditor [ hostname ] Command Description Starts an SGM Ev ent Conf igurator on the specif ied host. If no host name is specified, starts an SGM Ev ent Configurat o r on the default ho st, as ...

  • Cisco Systems OL-5742-01 - page 35

    C-35 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm evilstop List of SGM Commands • SGM Command Reference, page C-1 . sgm evilstop Solaris Only Command Description Forcefully stops all SGM servers on the local host. This c omma nd can be us eful if a norm al sgm stop does not stop the serv ers. Y ou mus ...

  • Cisco Systems OL-5742-01 - page 36

    Appendix C SGM Command Reference sgm fontstyle C-36 Cisco Signaling Gateway Manager User Guide OL-5742-01 • sgmp —Exports only signali ng gate way mated p air data. • sps —Exports only signaling p oint data. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page ...

  • Cisco Systems OL-5742-01 - page 37

    C-37 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm gttclient sgm gttclient Solaris Only Full S yntax sgm gttclient [ hostname ] Command Description Starts an SG M GTT client on th e specified host. If n o host name is sp ecified, starts an SGM GTT client on the default host, as specified during in stalla ...

  • Cisco Systems OL-5742-01 - page 38

    Appendix C SGM Command Reference sgm gttdir C-38 Cisco Signaling Gateway Manager User Guide OL-5742-01 The default GTT St aging Directory is located i n the SGM installation directory : • If you installed SGM i n the defau lt directory , /o pt , then the directory is /opt/CSCOsgm /gtt . • If you instal led SGM in a dif ferent direct ory , then ...

  • Cisco Systems OL-5742-01 - page 39

    C-39 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm gttstats After you change the directory , or enable TFTP file transfer for the directory , SGM asks if you wa nt to restart the SGM server . The ne w directory and TFTP setting take ef fect when you restart the SGM server . Y ou must be logged in as th e ...

  • Cisco Systems OL-5742-01 - page 40

    Appendix C SGM Command Reference sgm gttstats C-40 Cisco Signaling Gateway Manager User Guide OL-5742-01 – T o include or exclude object s based on the contents of the user -defined nodes.include , linksets.include , nodes.exclu de , and linksets.exclude fil es , create the files, then specify default . This is also the def ault setting for this ...

  • Cisco Systems OL-5742-01 - page 41

    C-41 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm help Thereafter , you need only enter this command once to generate the r eport. See the “Generating and V iewing Custom SG M Statistics Reports” section on page 15-113 for more information on t he use of this command. Y ou must be logged in as th e ...

  • Cisco Systems OL-5742-01 - page 42

    Appendix C SGM Command Reference sgm inactiveuserdays C-42 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm inactiveuserdays Solaris Only Full S yntax sgm inactiv euserdays [ number -of-days | clear ] Command Description If SGM User-Based Access is enabled, number of days a user can be inacti ve before disabling that user account. This fun ...

  • Cisco Systems OL-5742-01 - page 43

    C-43 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm installlog sgm installlog Solaris Only Full S yntax sgm installlog [ server | client ] Command Description Displays th e latest inst all log for t he server or client . If you do no t specify serv er or client , displays the lat est install lo g for both ...

  • Cisco Systems OL-5742-01 - page 44

    Appendix C SGM Command Reference sgm ipaccess C-44 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm ipaccess Solaris Only Full S yntax sgm ipaccess [ add [ ip-addr ] | clear | edit | list | rem [ ip-addr ] | sample ] Command Description Enables you to create and manage a list of client IP addresses allowed to connect to the SGM ser ver . T ...

  • Cisco Systems OL-5742-01 - page 45

    C-45 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm jspport sgm jspport Solaris Only Full S yntax sgm jspport [ port-number ] Command Description Sets a ne w port number for the JSP server , where port-number is the ne w , numeric port number . SGM verifies that the ne w port number is not already in use. ...

  • Cisco Systems OL-5742-01 - page 46

    Appendix C SGM Command Reference sgm killclients C-46 Cisco Signaling Gateway Manager User Guide OL-5742-01 Use the follo wing k eyw ords and ar guments with this command: • clear —Stops the SGM server , if necessary , and removes all SSL ke ys and certificates fro m the server . Before restar ting the serv er , you must either generate new SSL ...

  • Cisco Systems OL-5742-01 - page 47

    C-47 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm linkstats sgm linkstats Solaris Only Full S yntax sgm linkstats [ node-list [ id-ta g ]] [ sort-option ] [ quiet ] Command Description Generate s SGM link a nd linkset stati stics summar y reports: • T o include or e xclude specific objects in t he rep ...

  • Cisco Systems OL-5742-01 - page 48

    Appendix C SGM Command Reference sgm linkstats C-48 Cisco Signaling Gateway Manager User Guide OL-5742-01 • T o specify t he sort order for the reports, specify one of the follo wing keyw ords for the sort-option argument: – -sco —Sort based on the av erage Congestion for each link ( Av g Cong % ), in descen ding order . – -sis —Sort base ...

  • Cisco Systems OL-5742-01 - page 49

    C-49 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm li stgtt List of SGM Commands • SGM Command Reference, page C-1 . sgm listgtt Solaris Only Full S yntax sgm listgtt [ dir ectory ] Command Description Lists all current GTT f iles in the specif ied directory ( dir ectory must be a subdirectory of the G ...

  • Cisco Systems OL-5742-01 - page 50

    Appendix C SGM Command Reference sgm listusers C-50 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm listusers Solaris Only Full S yntax sgm listusers [ username ] Command Description If SGM User-Based Access is enabled, lis ts all currently def ined users in the authentic ation li ...

  • Cisco Systems OL-5742-01 - page 51

    C-51 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm logger sgm logger Solaris Only Command Description Displays the system messages mes sageLog. txt file with tail -f. T o stop the display , enter Ctrl-c . List of SGM Commands • SGM Command Reference, page C-1 . sgm logtimemode Solaris Only Full S yntax ...

  • Cisco Systems OL-5742-01 - page 52

    Appendix C SGM Command Reference sgm maxasciirows C-52 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm maxasciirows Solaris Only Full S yntax sgm maxasciiro ws [ number -of-r ows ] Command Description Sets the maximum number of ro ws for SGM ASCII W eb output, su ch as displays of detailed deb ugging information. If you enter this command ...

  • Cisco Systems OL-5742-01 - page 53

    C-53 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm maxhtmlrows If you enter this command without t he number -of-r ows argument, SGM displays the current maximum numb er of ro ws. Y ou can then change that v alue, or lea ve it as-is. The v alid range is 1 row to an unlimited number of ro ws. The default ...

  • Cisco Systems OL-5742-01 - page 54

    Appendix C SGM Command Reference sgm mldebug C-54 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm mldebug Solaris Only Full S yntax sgm mldeb ug [ mode ] Command Description Sets the mode for logging SGM deb ug messages: • normal —Logs all action, error , and info messages. Use sgm mldeb ug normal to re vert to the default settings i ...

  • Cisco Systems OL-5742-01 - page 55

    C-55 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm mlrstats sgm mlrstats Solaris Only Full S yntax sgm mlrstats [ node-list [ id-tag ]] [ sort-opti on ] [ quiet ] Command Description Generates SGM MLR processed, ab orts, continues, subtriggers, and tri ggers reports: • T o include or e xclude specific ...

  • Cisco Systems OL-5742-01 - page 56

    Appendix C SGM Command Reference sgm mlrstats C-56 Cisco Signaling Gateway Manager User Guide OL-5742-01 If you specify a node-lis t , you can also specify an id-tag to identify the reports. The id-tag can be any meaningful character string, but it cannot contain any spaces. The default v alue for id-tag is the process ID of the sgm mlrstats comman ...

  • Cisco Systems OL-5742-01 - page 57

    C-57 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm motd If you do not speci fy the quiet key word (that is, if you vie w the outp ut on your terminal), SGM di splays only instance-le vel statistics ( as listed in the description of the sort-option argument) . T o see the full set of trigg er-le vel stati ...

  • Cisco Systems OL-5742-01 - page 58

    Appendix C SGM Command Reference sgm msglog C-58 Cisco Signaling Gateway Manager User Guide OL-5742-01 If the message of the day is enabl ed, it is displayed whene ver a user attempts to launch an SGM or GTT client: • If the user accepts the message, the client launches. • If the user declines the message , the client does not launch. Use the f ...

  • Cisco Systems OL-5742-01 - page 59

    C-59 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm msglogage Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm msglogage Solaris Only Full S yntax sgm msglogage [ number-of-days ] Command Description Sets the ma ...

  • Cisco Systems OL-5742-01 - page 60

    Appendix C SGM Command Reference sgm msglogsize C-60 Cisco Signaling Gateway Manager User Guide OL-5742-01 Note Do not set the ne w directory to an y of the following: /usr , /var , /opt , or /tmp . Do not set the ne w directory to th e same directory in which you are storing GTT files ( sgm g ttdir ), report f iles ( sgm r epdir ), or route table ...

  • Cisco Systems OL-5742-01 - page 61

    C-61 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm netlog When changing the number of messages to display , keep in mind that e very 5000 messages require approximat ely 1 MB. Y ou need to balance your need to refer to old messages against the amount of space they take up. Y ou must be logged in as th e ...

  • Cisco Systems OL-5742-01 - page 62

    Appendix C SGM Command Reference sgm newlevel C-62 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm newlevel Solaris Only Full S yntax sgm newlevel [ username ] Command Description If SGM User-Based Access is enabled, ch anges the authentication le ve l for the specified user . V a ...

  • Cisco Systems OL-5742-01 - page 63

    C-63 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm passwordage sgm passwordage Solaris Only Full S yntax sgm passwordage [ number-of-days | clear ] Command Description If SGM User-Based Access is ena bled and sgm authtype is set to local , number of days allo wed before forcin g users to change passwords ...

  • Cisco Systems OL-5742-01 - page 64

    Appendix C SGM Command Reference sgm patchlog C-64 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm patchlog Solaris Only Full S yntax sgm patchlog Command Description Uses P A GER to displa y the conten ts of th e patch log, which lists the patches that hav e been installed on the SGM server . The default path and f ilename for the patch ...

  • Cisco Systems OL-5742-01 - page 65

    C-65 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm pclist • master —Restores the P ointC odeF or mat.xml file to the def ault settings. • res t ore —Restores the P ointCodeF ormat.xml f ile to the last saved copy . Any changes you make tak e effect when you restart the SGM server . SGM preserv es ...

  • Cisco Systems OL-5742-01 - page 66

    Appendix C SGM Command Reference sgm poll C-66 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm poll Solaris Only Full S yntax sgm poll [ node ] [ node ]... Command Description Enables you t o poll one or mo re known nodes from the command line. U se the node arg uments to specify the DNS names or IP addresses of one or more kno wn nodes. ...

  • Cisco Systems OL-5742-01 - page 67

    C-67 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm print See the “Server Status Infor mation: Pollers” section on p age 2-38 for more information on demand pollers. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C- ...

  • Cisco Systems OL-5742-01 - page 68

    Appendix C SGM Command Reference sgm pushgtt C-68 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm pushgtt Solaris Only Full S yntax sgm pushgtt [ -l logfilename ] [ -u username ] [ -p passwor d ] [ -n enab leusername ] [ -e enablepassw or d ] [ -s stor ag ede vicename ] [ --ov erwrite | --no-ov erwrite ] [ --act ivate | --no-activate ] fi ...

  • Cisco Systems OL-5742-01 - page 69

    C-69 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm pushroute sgm pushroute Solaris Only Full S yntax sgm pushrout e [ -l logf ilename ] [ -u usern ame ] [ -p passwor d ] [ -n enableusername ] [ -e enablepasswor d ] [ -s stora gede vicename ] [ --ov erwri te | --no-ove rwrite ] [ --activ ate | --no-activ ...

  • Cisco Systems OL-5742-01 - page 70

    Appendix C SGM Command Reference sgm readme C-70 Cisco Signaling Gateway Manager User Guide OL-5742-01 List of SGM Commands • SGM Command Reference, page C-1 . sgm readme Command Description Displays the contents of the README f ile for SGM. List of SGM Commands • SGM Command Reference, page C-1 . sgm reboot Solaris Only Command Description Reb ...

  • Cisco Systems OL-5742-01 - page 71

    C-71 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm repcustage sgm repcustage Solaris Only Full S yntax sgm repcust age [ number-of-days ] Command Description Maximum number of days SGM is to archi ve custom reports. If you enter this command without the number-of-days ar gument, SGM display s the current ...

  • Cisco Systems OL-5742-01 - page 72

    Appendix C SGM Command Reference sgm repdir C-72 Cisco Signaling Gateway Manager User Guide OL-5742-01 See the “Changing the W a y SGM Handles Statistics Reports (Solaris Only)” section on page 15-3 for more information o n the use of this command. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Comm ...

  • Cisco Systems OL-5742-01 - page 73

    C-73 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm rephelp Do not set the ne w directory to th e same directory in which you are storing GTT files ( sgm g ttdir ), message log f iles ( sgm msglogdir ), or route table f iles ( sgm routedir ). After you change the directory , SGM asks if you want to restar ...

  • Cisco Systems OL-5742-01 - page 74

    Appendix C SGM Command Reference sgm replog C-74 Cisco Signaling Gateway Manager User Guide OL-5742-01 If you enter this command without the number-of-days ar gument, SGM display s the current maximum number of days. Y ou can then change that v alue, or lea ve it as-is. The v a lid range is 1 day to an unlimited number of d ays. The defau lt v alue ...

  • Cisco Systems OL-5742-01 - page 75

    C-75 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm restart sgm restart Solaris Only Full S yntax sgm restart [ jsp | pm | web ] Command Description Restarts SGM servers on the local host: • jsp —Restarts t he SGM JS P Server . • pm —Restarts the SGM Proce ss Mana ger and all managed processes. ? ...

  • Cisco Systems OL-5742-01 - page 76

    Appendix C SGM Command Reference sgm restoreprops C-76 Cisco Signaling Gateway Manager User Guide OL-5742-01 T o restore only specifi c parts of the SGM data f iles, use the follo wing k eyw ords: • gtt —Restores only SGM GTT f iles. • logs —Restores only SGM log files, such as th e message log files. • rep o rt s —Restores only SGM rep ...

  • Cisco Systems OL-5742-01 - page 77

    C-77 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm rootvars sgm rootvars Solaris Only Command Description Displays the contents of the /etc/CSCOsgm.sh file, which deter mines the roo t location of the SGM serv er and client installation. List of SGM Commands • SGM Command Reference, page C-1 . sgm rout ...

  • Cisco Systems OL-5742-01 - page 78

    Appendix C SGM Command Reference sgm routedir C-78 Cisco Signaling Gateway Manager User Guide OL-5742-01 Note This command copies all f iles in the current directory to the ne w directory . If you are logged in as t he super user , and you do not o w n the ne w directory , you might not be able to cop y the f iles. If that is the case, you must spe ...

  • Cisco Systems OL-5742-01 - page 79

    C-79 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm sechelp List of SGM Commands • SGM Command Reference, page C-1 . sgm sechelp Solaris Only Command Description Displays help for all commands related to SGM security . Y ou must be logged in as th e root user or as a super user to use this command. List ...

  • Cisco Systems OL-5742-01 - page 80

    Appendix C SGM Command Reference sgm secondaryserver C-80 Cisco Signaling Gateway Manager User Guide OL-5742-01 • Operating system configuration changes and program changes, at the Solaris lev el • SGM restarts • Failur es of computers, programs, communicati ons, and operations, at the Solaris le vel T o clear the log and restart the server , ...

  • Cisco Systems OL-5742-01 - page 81

    C-81 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm servername If you use the sgm secondaryserv er command to confi gure a secondary SGM server , but the primary SGM serv er fails before you laun ch the SGM client, then the SGM client has no kno wledge of the secondary server . T o list the secondary SGM ...

  • Cisco Systems OL-5742-01 - page 82

    Appendix C SGM Command Reference sgm services C-82 Cisco Signaling Gateway Manager User Guide OL-5742-01 Note Using the sgm servername command to reset the SGM serv er's def ault host name does not af fect communicatio n between the SG M server and the ITPs. List of SGM Commands • SGM Command Reference, page C-1 . sgm services Solaris Only C ...

  • Cisco Systems OL-5742-01 - page 83

    C-83 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm setpath and appends lines such as these to the use r's .cshr c file : set path=($path /opt /CSCOsgm/bin /opt/CSCOsgmClient/bin) # Ci scoSGM Thereafter , you ca n enter SGM commands like this: sgm help instead of like this: /opt/CSCOsgm/bin/sgm help ...

  • Cisco Systems OL-5742-01 - page 84

    Appendix C SGM Command Reference sgm snmpcomm C-84 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm snmpcomm Solaris Only Full S yntax sgm snmpcomm [ name ] Command Description Enables you to set a ne w default SNMP read community name. SGM automatically updates th e name in the SNMP paramet ers f ile. The def ault path and filename fo r t ...

  • Cisco Systems OL-5742-01 - page 85

    C-85 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm snmpget For inform ation about e xporting SNMP commun ity names from CiscoW orks2000 Resource Manager Essentials (RME), see the “Importing SNMP Communi ty Names from CiscoW orks2000 (Solaris Only)” section on page 19-2 . Y ou must be logged in as th ...

  • Cisco Systems OL-5742-01 - page 86

    Appendix C SGM Command Reference sgm snmpget C-86 Cisco Signaling Gateway Manager User Guide OL-5742-01 • -c community_string —SNMP communit y string. The def ault community string is specif ied in the SNMP parameters f ile, communities.conf . • -r re t r y —SNMP retry count. The default retry count is specif ied in the SNMP parameters file ...

  • Cisco Systems OL-5742-01 - page 87

    C-87 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm snmpget • --resol ve-integer | --no-resolv e-integer —Specif ies the time format : – Specify --resolv e-integer to display inte gers using th e string descript ion in the MIB, such as a vaila ble or una vaila ble . – Specify --n o-resolv e-intege ...

  • Cisco Systems OL-5742-01 - page 88

    Appendix C SGM Command Reference sgm snmphelp C-88 Cisco Signaling Gateway Manager User Guide OL-5742-01 • --int-instance inte ger —Appends the sp ecified inte ger instance OID to each polling MIB v ariable. • --str -instance string —Appends string instance OIDs to each polling M IB v ariable. For e xample, the follo wing commands perform t ...

  • Cisco Systems OL-5742-01 - page 89

    C-89 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm snmpnext sgm snmpnext Solaris Only Full S yntax sgm snmpnext [ -J JVM_ARG1 [ -J JVM_ARG2 ]...] [ -v snmp_version ] [ -c community_string ] [ -r re t r y ] [ -t timeout ] [ -d output_delimiter ] [ --header | --no-header ] [ --raw-octets | --no-raw-octets ...

  • Cisco Systems OL-5742-01 - page 90

    Appendix C SGM Command Reference sgm snmpnext C-90 Cisco Signaling Gateway Manager User Guide OL-5742-01 • --header | --no-head er —Specifies whether t o display v ariable names as table headers: – Specify --header to display v ariable names as table headers for tabular output, or to disp lay MIB va riable OIDs with the v alue for non-tabular ...

  • Cisco Systems OL-5742-01 - page 91

    C-91 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm snmpnext • --re solve-bits | --no-r esolve-bits —Specif ies the time format: – Specify --r esolve-bits to disp lay bits using the string descri ption in the MIB, such as continue or ruleset . – Specify --no-r esolve-bits to display bits as number ...

  • Cisco Systems OL-5742-01 - page 92

    Appendix C SGM Command Reference sgm snmpwalk C-92 Cisco Signaling Gateway Manager User Guide OL-5742-01 • --str -instance string —Appends string instance OIDs to each polling M IB v ariable. For e xample, the follo wing commands perform the same function: sgm snmpget --str -instance link_1 router_1 cItpSpLinksetState sgm snmpget router_1 cItpS ...

  • Cisco Systems OL-5742-01 - page 93

    C-93 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm snmpwalk Command Description Queries the specified ho stname , using SNMP GetN extRequests to “w alk” through the MIB. Use the followi ng optional ke ywo rds and argument s with this command: • -J JVM_ARG1 —JVM options. Th e -J ke yword and ar gu ...

  • Cisco Systems OL-5742-01 - page 94

    Appendix C SGM Command Reference sgm snmpwalk C-94 Cisco Signaling Gateway Manager User Guide OL-5742-01 • --getbul k | --no-getb ulk —(SNMP versi on 2c only) Specif ies whether to use the getbulk command to w alk the table: – Specify --getb ulk to use the getbulk command. This is the default setting. – Specify --no-getb ulk if you do not w ...

  • Cisco Systems OL-5742-01 - page 95

    C-95 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm snmpwalk • --resol ve-integer | --no-resolv e-integer —Specif ies the time format : – Specify --resolv e-integer to display inte gers using th e string descript ion in the MIB, such as a vaila ble or una vaila ble . – Specify --n o-resolv e-integ ...

  • Cisco Systems OL-5742-01 - page 96

    Appendix C SGM Command Reference sgm sounddir C-96 Cisco Signaling Gateway Manager User Guide OL-5742-01 • --int-instance inte ger —Appends the sp ecified inte ger instance OID to each polling MIB v ariable. • --str -instance string —Appends string instance OIDs to each polling M IB v ariable. For e xample, the follo wing commands perform t ...

  • Cisco Systems OL-5742-01 - page 97

    C-97 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm sounddir The default dir ectory for sound f iles is located in the SGM inst allation directory: • If you installed SGM in the def ault directory , /opt , then the default directory is /opt/CSCOsgm/sounds . • If you installed SG M in a dif ferent dire ...

  • Cisco Systems OL-5742-01 - page 98

    Appendix C SGM Command Reference sgm ssl C-98 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm ssl Solaris Only Full S yntax sgm ssl [ enable | disable | status ] Command Description If you ha ve ob tained the SSL-enabled v ersion of SGM and inst alled an SSL ke y/certif icate pair in SGM, you can use this command to man age SSL support in ...

  • Cisco Systems OL-5742-01 - page 99

    C-99 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm start See the “Implementing SSL Suppo rt in SGM” section on page 18-26 for more information on the use of this command. Y ou must be logged in as the root u ser (not as a super user) to use this command. List of SGM Commands • SGM Command Reference ...

  • Cisco Systems OL-5742-01 - page 100

    Appendix C SGM Command Reference sgm start gttclient C-100 Cisco Signaling Gateway Manager User Guide OL-5742-01 If you T elnet into a remote workst ation, the DISPLA Y v ariable must be set to your local displa y , or you cannot use th is command. If th e DISPLA Y variable is not set automatically , you must set it manually . See the “Setting th ...

  • Cisco Systems OL-5742-01 - page 101

    C-101 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm start jsp sgm start jsp Solaris Only Command Description Starts the SGM JSP Serv er on the local host. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm start ...

  • Cisco Systems OL-5742-01 - page 102

    Appendix C SGM Command Reference sgm statreps acct C-102 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm statreps acct Solaris Only Full S yntax sgm statreps [ acct | noacct ] Command Description Specif ies whether SGM is to generate MTP3 accounting statistics reports: • acct —Generate MTP3 a ccounting st atistics reports. MTP3 accoun ...

  • Cisco Systems OL-5742-01 - page 103

    C-103 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps cleancustom List of SGM Commands • SGM Command Reference, page C-1 . sgm statreps cleancustom Solaris Only Full S yntax sgm statreps cleancustom [ ta g ] Command Description Remov es all data from one or more SGM custo m statistics reports, r ...

  • Cisco Systems OL-5742-01 - page 104

    Appendix C SGM Command Reference sgm statreps dailyage C-104 Cisco Signaling Gateway Manager User Guide OL-5742-01 If you enter this command without the number-of-days ar gument, SGM display s the current maximum number of days. Y ou can then change that v alue, or lea ve it as-is. The v a lid range is 1 day to an unlimited number of d ays. The def ...

  • Cisco Systems OL-5742-01 - page 105

    C-105 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps diskcheck sgm statreps diskcheck Solaris Only Full S yntax sgm statreps [ diskcheck | nodiskcheck ] Command Description Specif ies whether SGM is to v erify that a disk has at least 10 MB of sp ace remaining before generating network statisti c ...

  • Cisco Systems OL-5742-01 - page 106

    Appendix C SGM Command Reference sgm statreps enable C-106 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm statreps enable Solaris Only Full S yntax sgm statreps [ disable | ena ble ] Command Description Enables SGM to gener ate network stati stics and accounting repo rts: • enable —Generate network statistics and accounting repo rts. ...

  • Cisco Systems OL-5742-01 - page 107

    C-107 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps export sgm statreps export Solaris Only Full S yntax sgm statreps [ expor t | noexport ] Command Description Specif ies whether SGM is to generate ne twork statistics and accounting reports in expor t format: • export —Generate network stat ...

  • Cisco Systems OL-5742-01 - page 108

    Appendix C SGM Command Reference sgm statreps gtt C-108 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm statreps gtt Solaris Only Full S yntax sgm statreps [ gtt | nogtt ] Command Description Specif ies whether SGM is to genera te GTT accountin g statistics reports: • gtt —Generate GTT accounting statistics reports. GTT accounting mus ...

  • Cisco Systems OL-5742-01 - page 109

    C-109 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps iplinks See the “Changing the W a y SGM Handles Statistics Reports (Solaris Only)” section on page 15-3 for more information o n the use of this command. This command has the same functi on as the sgm rephou rlyage command. Y ou must be log ...

  • Cisco Systems OL-5742-01 - page 110

    Appendix C SGM Command Reference sgm statreps link C-110 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm statreps link Solaris Only Full S yntax sgm statreps [ link | nolink ] Command Description Specif ies whether SGM is to generate link and linkset statistics summary reports: • link —Generate link and linkset statistics summary repo ...

  • Cisco Systems OL-5742-01 - page 111

    C-111 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps nullcaps See the “V iewin g the MLR Statistics Daily Reports” section on page 15- 53 for more information on MLR reports. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command ...

  • Cisco Systems OL-5742-01 - page 112

    Appendix C SGM Command Reference sgm statreps servratio C-112 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm statreps servratio Solaris Only Full S yntax sgm statreps servratio [ fa ctor ] Command Description Displays a gray background in the InSrv cell i n a network statistics repor t, if the follo wing co ndition is met: Current In-Ser ...

  • Cisco Systems OL-5742-01 - page 113

    C-113 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps timemode sgm statreps timemode Solaris Only Full S yntax sgm statreps timemode [ 12 | 24 ] Command Description Sets the time mode for dates in netw ork statistics reports: • 12 —Use 12-hour time, with AM and PM. 1:00 in the afternoon is 1:0 ...

  • Cisco Systems OL-5742-01 - page 114

    Appendix C SGM Command Reference sgm statreps utilratio C-114 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm statreps utilratio Solaris Only Full S yntax sgm statreps ut ilratio [ factor ] Command Description Displays a gray background in the Send Ut ilization or Receive Utilization cell in a network stat istics report, if the follo wing ...

  • Cisco Systems OL-5742-01 - page 115

    C-115 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm statreps xua sgm statreps xua Solaris Only Full S yntax sgm statreps [ xua | noxua ] Command Description Specif ies whether SGM is to generate stat istics reports for application serv ers and application server processes: • xua —Generate statistics ...

  • Cisco Systems OL-5742-01 - page 116

    Appendix C SGM Command Reference sgm stop C-116 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm stop Solaris Only Command Description Stops all SGM servers on the local host. Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm stopclients Solaris O ...

  • Cisco Systems OL-5742-01 - page 117

    C-117 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm stop pm List of SGM Commands • SGM Command Reference, page C-1 . sgm stop pm Solaris Only Command Description Stops the SGM Process Manager and al l managed processes on the local host. Y ou must be logged in as th e root user or as a super user to us ...

  • Cisco Systems OL-5742-01 - page 118

    Appendix C SGM Command Reference sgm superuser C-118 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm superuser Solaris Only Full S yntax sgm superuser [ username ] Command Description Enables the specified user to perform mo st function s that otherwise require the user to be logged in as t he root user . (The root user can still perform ...

  • Cisco Systems OL-5742-01 - page 119

    C-119 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm tac See the “Manually Synchronizin g Local SGM Passw ords” section on page 18-21 for more information on the use of this command . Y ou must be logged in as the root u ser (not as a super user) to use this command. List of SGM Commands • SGM Comma ...

  • Cisco Systems OL-5742-01 - page 120

    Appendix C SGM Command Reference sgm tnproxy C-120 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm tnproxy Solaris Only Full S yntax sgm tnproxy [ disabl e | enable | status ] Command Description Manages a T elnet pro xy . A T elnet proxy resides on a server and forwards T elnet requests from clients to ITPs that are acce ssible only from ...

  • Cisco Systems OL-5742-01 - page 121

    C-121 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm trapaccess The list of allo wed ITP IP addresses is contained in the tr apaccess.conf f ile. By default, wh en you f irst install SGM, the trapaccess.conf fi le does not e xist and SGM allows all IP addresses to send tr aps to the SGM server . T o creat ...

  • Cisco Systems OL-5742-01 - page 122

    Appendix C SGM Command Reference sgm trapsetup C-122 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm trapsetup Solaris Only Full S yntax sgm trapsetup [ disable ] Command Description Stops the SGM serv er , configu res SGM to recei ve SNMP traps (or pre vents SGM from receiving traps), then restarts th e SGM server . SGM give s you the op ...

  • Cisco Systems OL-5742-01 - page 123

    C-123 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm uninstall • For hpov , SGM also displays the location o f the HP OpenV iew home directory . • Status for the sgmT rapReceiv er (such as Running or Stopped ). List of SGM Commands • SGM Command Reference, page C-1 . sgm uninstall Solaris Only Comma ...

  • Cisco Systems OL-5742-01 - page 124

    Appendix C SGM Command Reference sgm updateus er C-124 Cisco Signaling Gateway Manager User Guide OL-5742-01 Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm updateuser Solaris Only Full S yntax sgm updateuser [ username ] Command Description If SGM User- ...

  • Cisco Systems OL-5742-01 - page 125

    C-125 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm useraccess List of SGM Commands • SGM Command Reference, page C-1 . sgm useraccess Solaris Only Full S yntax sgm useraccess [ disable | enable ] Command Description Enables or disables SGM User-Based Access. User-Based Access provides multi-le ve l pa ...

  • Cisco Systems OL-5742-01 - page 126

    Appendix C SGM Command Reference sgm userpass C-126 Cisco Signaling Gateway Manager User Guide OL-5742-01 sgm userpass Solaris Only Full S yntax sgm userpass [ username ] Command Description If SGM User-Based Access is enabled and sgm authtype is set to local , changes the specified user’ s SGM securi ty authentication password. If the user’ s ...

  • Cisco Systems OL-5742-01 - page 127

    C-127 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm viewlog sgm viewlog Solaris Only Command Description Uses P AGER to display the contents of the system message log. T o sav e the current contents of the log, clear the log, and restart the server , enter sgm viewlog clear . T o display the contents of ...

  • Cisco Systems OL-5742-01 - page 128

    Appendix C SGM Command Reference sgm webaccesslog C-128 Cisco Signaling Gateway Manager User Guide OL-5742-01 SGM ignores quotat ion marks in message_strin g . T o include quotation marks, use the escape character () in combination with quotat ion marks. For example: ./sgm wall Example of the ”sgm wall” command. sends the follo wing message: ...

  • Cisco Systems OL-5742-01 - page 129

    C-129 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm weberrorlog sgm weberrorlog Solaris Only Full S yntax sgm weberrorlog [ clear | -r ] Command Description Uses P AGER to display the SGM W eb server error log file for the server t o which you are connected, and w hich is currently runn ing the SGM serv ...

  • Cisco Systems OL-5742-01 - page 130

    Appendix C SGM Command Reference sgm webnames C-130 Cisco Signaling Gateway Manager User Guide OL-5742-01 Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm webnames Solaris Only Full S yntax sgm webnames [ display | re al ] Command Description Specif ies w ...

  • Cisco Systems OL-5742-01 - page 131

    C-131 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm webport sgm webport Solaris Only Full S yntax sgm webport [ port-number ] Command Description Sets a ne w port number for the W eb server , where port-number is the ne w , numeric port number . SGM verifies that th e ne w port number i s not alre ady in ...

  • Cisco Systems OL-5742-01 - page 132

    Appendix C SGM Command Reference sgm who C-132 Cisco Signaling Gateway Manager User Guide OL-5742-01 Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . sgm who Solaris Only Command Description Displays a li st of all client u ser name s and processes connected ...

  • Cisco Systems OL-5742-01 - page 133

    C-133 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm xuastats sgm xuastats Solaris Only Full S yntax sgm xuastats [ node-list [ id-tag ]] [ sort-option ] [ quiet ] Command Description Generates SGM accounting statis tics reports for application servers and application server processes: • T o include or ...

  • Cisco Systems OL-5742-01 - page 134

    Appendix C SGM Command Reference sgm xuastats C-134 Cisco Signaling Gateway Manager User Guide OL-5742-01 If you specify a node-lis t , you can also specify an id-tag to identify the reports. The id-tag can be any meaningful character string, but it cannot contain any spaces. The default v alue for id-tag is the process ID of the sgm xuastats comma ...

  • Cisco Systems OL-5742-01 - page 135

    C-135 Cisco Signaling Gateway Manager User Guide OL-5742-01 Appendix C SGM Command Reference sgm xuastats Y ou must be logged in as th e root user or as a super user to use this command. List of SGM Commands • SGM Command Reference, page C-1 . ...

  • Cisco Systems OL-5742-01 - page 136

    Appendix C SGM Command Reference sgm xuastats C-136 Cisco Signaling Gateway Manager User Guide OL-5742-01 ...

Manufacturer Cisco Systems Category Network Router

Documents that we receive from a manufacturer of a Cisco Systems OL-5742-01 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- OL-5742-01 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems OL-5742-01
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems OL-5742-01.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems OL-5742-01, service manual, brief instructions and user manuals Cisco Systems OL-5742-01. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems OL-5742-01.

Similar manuals

A complete manual for the device Cisco Systems OL-5742-01, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems OL-5742-01 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems OL-5742-01.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems OL-5742-01 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems OL-5742-01, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems OL-5742-01, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems OL-5742-01 - which should help us in our first steps of using Cisco Systems OL-5742-01
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems OL-5742-01
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems OL-5742-01 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems OL-5742-01?

Use the form below

If you did not solve your problem by using a manual Cisco Systems OL-5742-01, ask a question using the form below. If a user had a similar problem with Cisco Systems OL-5742-01 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)