Manual StarTech.com PEXSAT34RH

20 pages 1.45 mb
Download

Go to site of 20

Summary
  • StarTech.com PEXSAT34RH - page 1

    Manual Revision: 04/30/2013 For the most up-to-date information, please visit: www.startech.com DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr .startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.co ...

  • StarTech.com PEXSAT34RH - page 2

    Instruction Manual FCC C ompliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radi ...

  • StarTech.com PEXSAT34RH - page 3

    Instruction Manual i T able of C ont ents Introduction ............................................................................................ 1 Packaging Conten ts ................................................................................................................................. 1 System Requirements ............................ ...

  • StarTech.com PEXSAT34RH - page 4

    Instruction Manual 1 Introduction The PEXSA T34RH 4-Port PCI Express 2.0 SA T A Controller Card with HyperDuo adds 4 AHCI SA T A III por ts to a comput er through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Fea turing H yperDuo technology , the SA T A card oers ...

  • StarTech.com PEXSAT34RH - page 5

    Instruction Manual 2 4x SA T A III por ts P roduc t Diag ram ...

  • StarTech.com PEXSAT34RH - page 6

    Instruction Manual 3 Installation Hardwar e I nstallation W ARNING! PCI Express cards, like all comput er equipment, can be severely damaged by static electricity. Be sure tha t you are properly grounded befor e opening your computer case or touching your PCI Expr ess card. StarT ech.com recommends that you wear an anti-static strap when installing ...

  • StarTech.com PEXSAT34RH - page 7

    Instruction Manual 4 Driver Installation Window s XP NOTE: The latest driver is a vailable from www.startech.com. 1. Once the computer has started and the operating system is fully loaded , inser t the provided Driver CD into the c omputer ’ s CD/DVD drive. 2. AutoPla y should give you the option to brow se the les on the CD or automatically o ...

  • StarTech.com PEXSAT34RH - page 8

    Instruction Manual 5 Management Utility Installation (Optional - Windows only) RAID and/or HyperDuo conguration can be accomplished either through the integrated car d-BIOS utility, or through the Marvell Storage Utility (MSU). Details for installing the MSU are below . T o install the Marvell Storage Utility (MSU) in W indows: 1. Run the MSUSet ...

  • StarTech.com PEXSAT34RH - page 9

    Instruction Manual 6 b. F irefox i. Fr om the menu bar, select T ools > Options ii. Select the “Con tent ” tab and ensure that the “Enable Javascript” option is checked (should be by default) – if it is not, select it and click “OK” ...

  • StarTech.com PEXSAT34RH - page 10

    Instruction Manual 7 V erifying Installation Window s Fr om the main desktop, right-click on “M y Comput er ” (“Computer” in Vista/7/8), then select Manage. In the new Computer Management window , select D evice Manager from the left window panel. Under the “SCSI and RAID Controllers” category (“Storage Controllers” in Vista or late ...

  • StarTech.com PEXSAT34RH - page 11

    Instruction Manual 8 Operation RAID Congura tion Card BIOS Method W ARNING! Creating a RAID virtual disk destroys all data on the physical disks included in the virtual disk set. Make sure to back up all data before continuing . 1. When prompted on startup, pr ess Ctrl+M to enter the card BIOS utility Press <Ctrl>+<M> to ent er BIOS ...

  • StarTech.com PEXSAT34RH - page 12

    Instruction Manual 9 6. The “Create Virtual Disk” conguration options appear in the “Information” pane (right-side), here you ar e able to select the R AID level and other conguration options: a. Select 2 HDDs for RAID 0 or RAID 1 b. Select 3 HDDs for RAID 0 c. Select 4 HDDs for RAID 0 or RAID 10 7. After conguring the virtual disk ...

  • StarTech.com PEXSAT34RH - page 13

    Instruction Manual 10 3. F rom the “Cr eate new VD” screen that appears, click the “Select RAID Level” drop- down to choose the appropriate RAID type 4. This will enable you to plac e a check box beside the disks tha t you would like to use as part of the RAID set. Once you have selected, click “Next ” to conrm your selection. 5. Y o ...

  • StarTech.com PEXSAT34RH - page 14

    Instruction Manual 11 HyperDuo Congura tion HyperDuo oers the following two modes that y ou can congure using either of the procedures outlined in the f ollowing sections: • Safe mode creates a virtual disk that is optimized for best fault t olerance – the frequently accessed les copied t o the SSD for per formance ar e also stored ...

  • StarTech.com PEXSAT34RH - page 15

    Instruction Manual 12 7. Highlight “Keep original data” and press Enter to select. Select Y es or No and press Enter . W ARNING! Selecting “No” will destroy all data on the disks included in the virtual disk set. Make sure to back up all data befor e continuing. The “Keep original data ” option is disabled when you choose Capacity mode, ...

  • StarTech.com PEXSAT34RH - page 16

    Instruction Manual 13 The newly created HyperDuo drive will then appear in the left pane and begin initializing. This can take up to 30 minutes to complete , and system per f ormance may be slow during this period. HyperDuo Management ( Windo ws only) 1. F rom the left pane of the MSU, select “HyperDuo Service” 2. The right pane will then displ ...

  • StarTech.com PEXSAT34RH - page 17

    Instruction Manual 14 3. Select Submit to apply your changes, then select “OK” on the pop -up that follow s. 4. If the folder you would like t o optimize is not available, select “ Advanced” from the “HyperDuo Ser vice ” pane. 5. The “Customiz e Wizar d” will pop-up and allow you to select the desired folders. ...

  • StarTech.com PEXSAT34RH - page 18

    Instruction Manual 15 Specications Host Interface PCI Express 2.0 SA T A Revision 3.0 Form F actor F ull/Low Prole Chipset ID Marvell 9230 Internal Connectors 4x 7-pin SA T A plug Maximum Tr ansfer Rate SA T A: 6Gbps RAID Support RAID 0, 1, 1+0 Port Multiplier Y es* Operating T emperatur e 5°C ~ 50°C (41°F ~ 122°F) Storage T emperature -2 ...

  • StarTech.com PEXSAT34RH - page 19

    Instruction Manual 16 T echnical Suppor t StarT ech.com’ s lifetime technical support is an int egral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit ww w .startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the la test drivers/ ...

  • StarTech.com PEXSAT34RH - page 20

    Hard-to-nd made easy . At StarT ech.com, that isn ’t a slogan. It ’ s a promise. StarT ech.com is your one -stop source for ever y connec tivity part you need. From the latest technology t o legac y pr oduc ts — and all the par ts that bridge the old and new — we can help you nd the parts that connect your solutions. We make it easy t ...

Manufacturer StarTech.com Category Computer Accessories

Documents that we receive from a manufacturer of a StarTech.com PEXSAT34RH can be divided into several groups. They are, among others:
- StarTech.com technical drawings
- PEXSAT34RH manuals
- StarTech.com product data sheets
- information booklets
- or energy labels StarTech.com PEXSAT34RH
All of them are important, but the most important information from the point of view of use of the device are in the user manual StarTech.com PEXSAT34RH.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals StarTech.com PEXSAT34RH, service manual, brief instructions and user manuals StarTech.com PEXSAT34RH. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product StarTech.com PEXSAT34RH.

A complete manual for the device StarTech.com PEXSAT34RH, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use StarTech.com PEXSAT34RH by users. Manuals are usually written by a technical writer, but in a language understandable to all users of StarTech.com PEXSAT34RH.

A complete StarTech.com manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual StarTech.com PEXSAT34RH - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the StarTech.com PEXSAT34RH, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the StarTech.com PEXSAT34RH, that we can find in the current document
3. Tips how to use the basic functions of the device StarTech.com PEXSAT34RH - which should help us in our first steps of using StarTech.com PEXSAT34RH
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with StarTech.com PEXSAT34RH
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of StarTech.com PEXSAT34RH in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning StarTech.com PEXSAT34RH?

Use the form below

If you did not solve your problem by using a manual StarTech.com PEXSAT34RH, ask a question using the form below. If a user had a similar problem with StarTech.com PEXSAT34RH it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)