-
Sanyo DC-MX30 - page 1
INSTRUCTION MANUAL DC-MX30 MICRO Hi-Fi SYSTEM ...
-
Sanyo DC-MX30 - page 2
1 C O N T E N T S P A G E IMPORT ANT SAFETY INFORMA TION……………………… ……………………………………………2 HEARING IMPORT ANT NOTE………………………………………………………… …………………..3 LOCA TION OF CONTROLS AND FUNCTIONS ……………………………………………… ……? ...
-
Sanyo DC-MX30 - page 3
2 IMPORT ANT SAFETY INFORMA TION REMA RK: In case of malfunction due to electrostatic disc harge or fast transient (Burst), just reset the product (reconnect of power source may be re quired) to resume normal operation. z Keep this unit away from dripping or splashing water . Ensure that no objects filled with liquids, such as vases, are placed on ...
-
Sanyo DC-MX30 - page 4
3 Note: z This unit will become warm when used for a long period of time. It’s a normal phenomenon. Don’t worry about it. z This CD player includes microprocessors, whic h may malfunction as a result of external electrical interference or noise. If the CD is not working properl y , disconnect the power source and then reconnect it. z In case of ...
-
Sanyo DC-MX30 - page 5
4 LOCA TION OF CONTRO LS AND FUNCTIONS MAIN UNIT 1. Power Indicator 2. REMOTE Sensor 3. BA SS XP ANDER Indicator 4. DISPLA Y 5. FM ST Indicator 6. +VOLUME- Control 7. TUNING Control 8. Dial Pointer 9. PLA Y / P AUSE Button 10. Button 11. Button 12. PROGRAM Button 13. PLA Y MODE Button 14. STOP Button 15. FOLDER+ Button 16. PHONES Socket 17. AUX IN ...
-
Sanyo DC-MX30 - page 6
5 Remote Control 35. PLA Y/ P AUSE Button 36. STOP Button 37. F. F. B u t t o n 38. F .R Button 39. PLA Y MODE Button 40. FOLDER - Button 41. FOLDER + Button 42. PROGRAM Note: The distance between the remote control and the main unit should not be too far . The remote control should be within approx. 7 meters at straight line to the REMOTE Sensor . ...
-
Sanyo DC-MX30 - page 7
6 SETTING UP AND CONNECTING THE UNIT Replacing batter y of the remote contr ol 1. Squeeze the notched tab A while pulling the battery door latch B out to take the battery holder out. 2. Insert a “CR2025” 3V lithium battery . Make sure the polarity (the + and – side of the battery) is correct. 3. Replace the battery holder back in the remote c ...
-
Sanyo DC-MX30 - page 8
7 1. Unwind the AC Power Cord completel y . 2. Insert the plug into any convenient AC outlet. 3. As soon as the unit has been connected with the mains voltage, part s of the unit are in operation due to the standby function. T urn of f the unit completely before pulling the mains plug out of the AC outlet. AUX connection 1. Slide Function selector ...
-
Sanyo DC-MX30 - page 9
8 COMP ACT DISC OPERA TION Notes when operating the CD disc z Only press the CD Door Open but ton to open the CD door . z T o remove the di sc, hold it by the edges and remove from the holder . Loading Compact Disc 1. Slide the FUNCTION selector to CD position. 2. Press the OPEN button to open the CD door . 3. Place the disc into the tray with labe ...
-
Sanyo DC-MX30 - page 10
9 If necessary , press the PLA Y/P A USE button to begin playback. The player will randomly select a track to play from the disc. Note: In program mode, Random playback can’t be selected. Clear play mode Press the PLA Y MODE button fourth times to cancel the play mode and norm al playback will resume. Programmed Playback It is possible to program ...
-
Sanyo DC-MX30 - page 11
10 IMPORT ANT NOTE FOR MP3/CD PLA YBACK CA P A BILITY Because of none-standardized format definiti on / production of MP3 / CD, playback quality & performance are not guaranteed. SANYO is not responsible for the playability of MP3 in any case due to recording conditions such as PC performance, writing software, media ability and etc. MODE butto ...
-
Sanyo DC-MX30 - page 12
11 CASSETTE RECORDER OPERA TION Checking the Cassette Make sure that the cassette tape has on slack bef ore inserting it to cassette compartment. If the tape slacks, the trouble may result when you play the tape, use a pencil as shown to take up slack on one of the reels.(Refer to figure on the right. ) PLA Y B ACK 1. Slide FUNCTION selector to T A ...
-
Sanyo DC-MX30 - page 13
12 3. Insert a blank tape with exposed side downwards and full spool to the left side into cassette compartment and close cassette door . 4. Press the RECORD button to start recording 5. Press the STOP/EJECT button to stop recording and the CD will be change to pause mode, press the RECORD button to continue rec ording. Press the STOP/EJECT button ...
-
Sanyo DC-MX30 - page 14
13 Compact Discs Maintenance z T reat the disc carefully . Handle th e disc only by its edge. Never allow your fingers to contact with the shiny , unprinted side of the disc. z Do not attach adhesive tape, stickers etc., to the disc label. z Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or adhesive cleaners to ...
-
Sanyo DC-MX30 - page 15
14 TROUBLESHOOTING GUIDE If you experience any difficulties in operating this uni t, please take the time to read the hints and tips shown in the troubleshooting guide below. Symptom Possible cause Solution Radio No signal from the Radio Unit is not in Radio mode Slide the FUNCTION selector to Radio mode Station is not tuned properly for AM or FM R ...
-
Sanyo DC-MX30 - page 16
15 SPECIFICA TIONS Radio Section Frequency Range ------ --------------- ----------- AM (Built-in ferrite bar): 530 – 160 0 KHz FM (wire antenna): 88 – 108 MHz CD / MP3 Player Playback System ----------- --------------- ------ T op load CD mechanism Memory Program ----- ----------------------- ---- 20 T racks Laser Output (Maximum) ----- ------- ...
-
Sanyo DC-MX30 - page 17
SANYO Electric C o., Ltd. Made in China CODE NO: 172-G401043010-OSY ...
Do you have a question concerning Sanyo DC-MX30?
Use the form below
If you did not solve your problem by using a manual Sanyo DC-MX30, ask a question using the form below. If a user had a similar problem with Sanyo DC-MX30 it is likely that he will want to share the way to solve it.