Manual Craftsman 320.61199

30 pages 1.65 mb
Download

Go to site of 30

Summary
  • Craftsman 320.61199 - page 1

    Operator's Manual C RI:IF MRN°I X E 12-Volt Lithium-Ion Cordless Multi-Tool Model No. 320.61199 c_ius LISTED _k WARNING: To reduce the risk of injury, the user must read and understand the Operator's manual before using this product. • Warranty • Safety • Assembly • Operation • Maintenance Charge battery Before first use Sears, ...

  • Craftsman 320.61199 - page 2

    Warranty page 2 Safety Symbols page 3 Safety Instructions pages 4-12 Description page 13 Assembly pages 13-14 Operation pages 14-22 Application Page 23 Maintenance pages 24-25 Troubleshooting page 26 Exploded View and Part List page 27 Sears Repair Parts Phone Number Back Cover ONE YEAR FULL WARRANTY ON CRAFTSMAN® TOOL If this Craftsman tool fails ...

  • Craftsman 320.61199 - page 3

    The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures. ,_ WA ...

  • Craftsman 320.61199 - page 4

    Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power rain Minutes Time "k., Alterna ...

  • Craftsman 320.61199 - page 5

    GENERAL SAFETY RULES _, WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. The term "power tool" in all of warnings listed below refers to corded power tools or battery-operated (cordless) power tools. READ AND SAVE THESE INSTRU ...

  • Craftsman 320.61199 - page 6

    PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Use safety equipment. Always wear eye protection. Safety equipm ...

  • Craftsman 320.61199 - page 7

    POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and more safely at the rate for which it was designated. Do not use the power tool if the switch does not turn it ON and OFF. Any power tool that cannot be controlled with the switch is dangerous and mu ...

  • Craftsman 320.61199 - page 8

    BATTERY TOOL USE AND CARE • Make sure that the switch is in the OFF position before inserting the battery pack. Inserting the battery pack into power tools that have the switch ON invites accidents. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when ...

  • Craftsman 320.61199 - page 9

    SERVICE • Have your power tool serviced by a qualified repair person. • When servicing a power tool, use only identical replacement parts. • Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES FOR CORD ...

  • Craftsman 320.61199 - page 10

    • Only use application accessories in good condition. Do not use them if they are torn or worn. • Do not restart a cutting operation in the workpiece. To resume a cutting operation: while keeping the tool from contacting the workpiece, allow the tool reach full speed and then carefully guide the cutting accessory into the cut. • Keep your han ...

  • Craftsman 320.61199 - page 11

    • Keep the cord and charger from heat to prevent damage to housing or internal parts. • Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic. • An extension cord should not be used unless absolutely necessary. Use of an ...

  • Craftsman 320.61199 - page 12

    I M PORTANT SAFETY INSTRUCTIONS • Save these instructions. This manual contains important safety and operating instructions for 12V Multi-Tool 320.61199. • Before using the ,battery charger, read all instructions and cautionary markings on battery charger, the battery and the product using battery, as well as the operator's manuals for the ...

  • Craftsman 320.61199 - page 13

    I D] =_.'_o_[[o_] KNOW YOUR MULTI-TOOL (Fig.l) PRODUCT SEPCIFICATION Motor 12 Volt DC Tool Weight (with battery) 1.81bs Oscillation Rate 15000/Min Oscillation Angle _+1.4 degrees Battery Type Lithium-Ion Battery Voltage 12 Volt DC Charger Input 120-Volts, 60 Hz AC only Optimum Charging Temperature 32°F (0 ° C) -104°F (40°C) _, WARNING: The ...

  • Craftsman 320.61199 - page 14

    • If any part is damaged or missing, please refer to the numbers listed on the back page of operator's manual. PACKING LIST Multi-Tool, straight edge flush cut blade, circular saw blade, hardened steel scraping blade, carbide circular adhesive removal blade, carbide triangular rasp, sanding plate and 24 pcs sandpapers, hex key, vacuum adapto ...

  • Craftsman 320.61199 - page 15

    BATTERY PROTECTION). BATTERY PROTECTION The battery circuitry protects the battery pack from extreme temperature, over discharge, and over-charge. To protect the battery from damage and prolong its life, the battery pack circuitry will turn off the battery pack if it becomes overloaded or if the temperature becomes too high during use. This may hap ...

  • Craftsman 320.61199 - page 16

    HOW TO CHARGE THE BATTERY PACK NOTE: This Lithium-ion battery pack is shipped partially charged. Before using it the first time, fully charge the battery pack. A fully discharged battery pack will charge in about 30 minutes in an environment between 32 ° F (0 ° C) and 104 ° F (40 ° C). 1. Charge the Lithium-Ion battery pack with the correct cha ...

  • Craftsman 320.61199 - page 17

    CHARGING A HOT BATTERY PACK If the battery pack is above normal temperature range, the red LED will illuminate and the green LED will be off. When the battery pack cools down to approximately 104°F (40°C), the charger will automatically begin charging. CHARGING A COLD BATTERY PACK If the battery pack is below the normal temperature range, the red ...

  • Craftsman 320.61199 - page 18

    TO DETACH BATTERY PACK (Fig. 4) 1. Make sure that the tool is "OFF" 2. Depress the battery release buttons located on the both sides of th of the battery pack to release the battery pack. 3. Pull the battery pack out and remove it from the tool. A_, CAUTION: When placing the battery pack in the tool, be sure that the raised rib on battery ...

  • Craftsman 320.61199 - page 19

    DETACHABLE VACUUM ADAPTOR (Fig.7) Always connect the vacuum adaptor when sanding. Remove the application tool before mounting the vacuum adaptor. To improve dust extraction from the working area, insert the dust-extraction adaptor into the rear of the tool, and connect the adaptor to a dust-extraction system or a suitable vacuum cleaner. Fig. 7 I A ...

  • Craftsman 320.61199 - page 20

    Fig. 8 Fig. 9 Fig. 10 Ribs on shaft Grooves Fig. 11 0 30 60 120 150 180' 90 _ 240' 330' 210 270' 300' MOUNTING/CHANGING THE SANDPAPER (Fig.12) A_, WARNING: Failure to remove the battery pack from the tool when assembling parts, making adjustments, or changing accessories could result in accidental starting causing possibly ...

  • Craftsman 320.61199 - page 21

    SAWING Fig. 13 & WARNING: Use sharp, undamaged saw blades only. Deformed, blunt saw blades or saw blades that are otherwise damaged can break. WARNING: When sawing light building materials, observe the statutory provisions and the recommendations of the material suppliers. _, WARNING: Plunge cuts may only be applied to soft materials, such as w ...

  • Craftsman 320.61199 - page 22

    SANDING WARNING: Do not touch the gear box after prolonged use; it could be very hot. • The removal rate and the sanding pattern are determined by the choice of sanding sheet and the work surface. • Apply uniform sanding pressure to extend the life of the sanding sheets. • Intensifying the sanding pressure does not lead to an increase of the ...

  • Craftsman 320.61199 - page 23

    r:1 -,J -,J al [t]_aiil[,) _ i ACCESSORY APPLI CATION Carbide Circular Adhesive Removal Blade Carbide Triangular Rasp Hardened Steel Scraping Blade High Speed Steel Circular Saw Blade High Carbide steel Straight Edge Flush Cut Blade Sanding Plate and Sandpaper Cut out the grout around tile Remove tile adhesive residue Remove floor coverings and scr ...

  • Craftsman 320.61199 - page 24

    _, WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. _1, WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. A_, WARNING: It is not recommended to use compressed dry air as clean ...

  • Craftsman 320.61199 - page 25

    (26°C) and free of moisture. • Store Lithium-Ion battery packs in a 30%-50% charged condition. • Every six months of storage, fully charge the Lithium-Ion battery pack. • Exterior may be cleaned with a cloth or soft non-metallic brush. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose ...

  • Craftsman 320.61199 - page 26

    PROBLEM CAUSE SOLUTION The tool does not work Battery is depleted Charge the battery Motor overheating Be sure cooling vents Clean, clear vents. Do are free from dust and not cover with hand obstacles during operation 61199 Manual_Revised_09 0310 Page 26 ...

  • Craftsman 320.61199 - page 27

    12 VOLT LITHIUM-ION CORDLESS MULTI-TOOL MODEL NUMBER 320.61199 The Model Number will be found on the Nameplate attached to the handle of the Multi-Tool. Always mention the Model Number when ordering parts for this tool. , , , , / ] I ____J 61199 ManuaLRevised_09 0310 Page 27 ...

  • Craftsman 320.61199 - page 28

    61199 Manual_Revised_09 0310 Page 28 ...

  • Craftsman 320.61199 - page 29

    61199 Manual_Revised_09 0310 Page 29 ...

  • Craftsman 320.61199 - page 30

    Your Home For expert troubleshooting and home solutions advice: manage home www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-y ...

Manufacturer Craftsman Category Portable Multimedia Player

Documents that we receive from a manufacturer of a Craftsman 320.61199 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 320.61199 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 320.61199
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 320.61199.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 320.61199, service manual, brief instructions and user manuals Craftsman 320.61199. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 320.61199.

A complete manual for the device Craftsman 320.61199, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 320.61199 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 320.61199.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 320.61199 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 320.61199, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 320.61199, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 320.61199 - which should help us in our first steps of using Craftsman 320.61199
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 320.61199
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 320.61199 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 320.61199?

Use the form below

If you did not solve your problem by using a manual Craftsman 320.61199, ask a question using the form below. If a user had a similar problem with Craftsman 320.61199 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)