English dropdown-ico

Manual Cisco Systems SPA2102

96 pages 0.73 mb
Download

Go to site of 96

Summary
  • Cisco Systems SPA2102 - page 1

    Model No . Phone Adapter with Router SP A2102 Voice User Guide VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 2

    VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 3

    Phone Adapter with Router Copyright and T rademarks Specificat ions are subject t o change without notice. Linksys is a registered trademar k or trademark o f Cisco Systems, Inc . and/or its affiliates in the U.S . and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks o ...

  • Cisco Systems SPA2102 - page 4

    Phone Adapter with Router VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 5

    Phone Adapter with Router Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this Guide? 2 Chapter 2: Networking Basics 5 An Introduction to Local Area Networks 5 The Use of IP Addresses 5 Chapter 3: Getting to Know the Phone Adapter 7 The Back Panel 7 The Front Panel 8 Chapter 4: Getting Started 9 Before You Begin 9 Connecting the P ...

  • Cisco Systems SPA2102 - page 6

    Phone Adapter with Router Appendix A: Troubleshooting 45 Common Problems and Solutions 45 Frequently Asked Questions 56 Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter 61 Windows 98 or Me Instructions 61 Windows 2000 or XP Instructions 62 For the Phone Adapter’s Web-based Utility 62 Appendix C: Windows Help 63 Appendi ...

  • Cisco Systems SPA2102 - page 7

    Phone Adapter with Router List of Figures Figure 3-1: Back Panel 7 Figure 3-2: Front Panel 8 Figure 4-1: Connect a Telephone 9 Figure 4-2: Connect a PC 10 Figure 4-3: Connect to the Modem 10 Figure 4-4: Connect Power 10 Figure 4-5: Login Screen 11 Figure 4-6: Router - WAN Setup Screen 11 Figure 4-7: MAC Clone Settings 11 Figure 4-8: Static IP Setti ...

  • Cisco Systems SPA2102 - page 8

    Phone Adapter with Router Figure 6-11: Voice - User 1 Screen 39 Figure 6-12: Speed Dial and S upplementary Service Settings 41 Figure 6-13: Distinctive Ring a nd Ring Se ttings 42 Figure B-1: IP Configuration Screen 61 Figure B-2: MAC/Adapter Address 61 Figure B-3: MAC/Physical Address 62 Figure B-4: MAC Address Cloning 62 VoIPon www.voipon.co.uk s ...

  • Cisco Systems SPA2102 - page 9

    Phone Adapter with Router 1 Chapter 1: Introduction Welcome Chapter 1: Introduction W elcome Thank you for choo sing the Phone Adapter with R outer . This Phone Adapter will allo w your computers to share a high-speed Internet connection as well as resources, including fil es and prin ters. And after you have set up your Internet phone ser vice, al ...

  • Cisco Systems SPA2102 - page 10

    Phone Adapter with Router 2 Chapter 1: Introduction What’s in this Guide? T o crea te your netwo rk, install and se t up the Phon e Adapter . T o guide you th rough the process, use the instructions in the Quick Installation or this User Guide to help you. T hese instructions should be all you need to get the most out of the Phone Adapter wi th R ...

  • Cisco Systems SPA2102 - page 11

    Phone Adapter with Router 3 Chapter 1: Introduction What’s in this Guide? • Appendix A: T roubleshooting This appendix describes some possible problems and solutions, as well as frequent ly asked questions, regarding installation and use of the Phone Adapter . • Appendix B: Finding the MAC Address and IP Address for Y our Ether net Adapter Th ...

  • Cisco Systems SPA2102 - page 12

    Phone Adapter with Router 4 Chapter 1: Introduction What’s in this Guide? VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 13

    Phone Adapter with Router 5 Chapter 2: Networking Basics An Introduction to Local Area Networks Chapter 2: Networking Basics An Introduction to Local Ar ea Networks Simply put, a router is a network device that connects two networks to gether . The Phone Adapter connects your local area network (LAN), o r the group of PCs in your home or office, to ...

  • Cisco Systems SPA2102 - page 14

    Phone Adapter with Router 6 Chapter 2: Networking Basics The Use of IP Addres ses If you use the Phone Adapter to share your cable or DSL In ternet connection, con tact your ISP to find out if they have assigned a static IP addr ess to your account. If so, yo u will need that static IP address when configuring the Phone Adapter . Y ou can get the i ...

  • Cisco Systems SPA2102 - page 15

    Phone Adapter with Router 7 Chapter 3: Getting to Know the Phone Adapter The Back Panel Chapter 3: Getting to Know the Phone Adapter The Back P anel The Phone Adapter’s ports are located on the back panel. PHONE 1/2 Use this port to connect an analog ph one (or fax machine) with an R J-11 telephone cable . ETHERNET The ETHERNET port connects to a ...

  • Cisco Systems SPA2102 - page 16

    Phone Adapter with Router 8 Chapter 3: Getting to Know the Phone Adapter The Front Panel The Front P anel The Phone Adapter’s LEDs, which inform you about network activities, are located on the front panel. P ower Green. The Po we r LED ligh ts up when the Phone Adapter is powered on and connected to the Internet. It fl ashes when the Phone Adapt ...

  • Cisco Systems SPA2102 - page 17

    Phone Adapter with Router 9 Chapter 4: Getting Started Before You B egin Chapter 4: Getting Star ted Before Y ou Begin Make sure you have the following: • An active Internet connection • An active Internet phone se rv ice account and its settings • cable/DSL modem • One computer for configur ation of the Pho ne Adapter • Analog telephone ...

  • Cisco Systems SPA2102 - page 18

    Phone Adapter with Router 10 Chapter 4: Getting Started Connecting the Phone Adapter 4. Connect one end of an Ethernet ne twork cable (included) to the ETHE RNET port of the Phone Adapter . Connect the other end to the Ethernet port of your PC. 5. Connect one end of a different Ethe rnet network c able to the INTERNET port of the Phone Adapter . Co ...

  • Cisco Systems SPA2102 - page 19

    Phone Adapter with Router 11 Chapter 4: Getting Started Configuring the Phone Adapter Configuring the Phone Adapter 1. Launch the web browser on the PC. 2. Enter 192.168.0.1/advanced in the Address field ( 192.168.0.1 is the default local IP address of the Phone Adapter). Then press t he Enter ke y . 3. If your Internet T elephony Service Provider ...

  • Cisco Systems SPA2102 - page 20

    Phone Adapter with Router 12 Chapter 4: Getting Started Configuring the Phone Adapter Static IP a. Select Static IP from the Connection T ype drop-down menu. b . In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field. c . In the Op ...

  • Cisco Systems SPA2102 - page 21

    Phone Adapter with Router 13 Chapter 4: Getting Started Placing the Phone Adapte r Placing the Phone Adapter There are two ways to place the Phone Adapter . The fi rst way is to place the Phone Adapter horizontally on a surface . The second way is to mount the Phone Adapter on a w all. The wall-mount option is explained in further detail below . Wa ...

  • Cisco Systems SPA2102 - page 22

    Phone Adapter with Router 14 Chapter 4: Getting Started Placing the Phone Adapter VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 23

    Phone Adapter with Router 15 Chapter 5: Using the Interactive Voice Response Menu Overview Chapter 5: Using the Interactive Voice Response Menu Overview Y ou may need to manually configure the Phone Adapter by entering the settings provided by your Internet T elephony Service Provider (IT SP). This chapter explains how to use the Interactive Voice ...

  • Cisco Systems SPA2102 - page 24

    Phone Adapter with Router 16 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu Using the Interactive V oice Response Menu While entering a value , such as an IP address, you may exit without entering any changes. Press the * (star) key twice within half a second. Otherwise, the * will be treated as a dec ...

  • Cisco Systems SPA2102 - page 25

    Phone Adapter with Router 17 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu The settings you have saved will tak e effect afte r you have hung up the telephone . The Phone Adapter may reboot at this time . Interactive V o ice Response Menu Action Command (press these keys on the telephone) Choices Des ...

  • Cisco Systems SPA2102 - page 26

    Phone Adapter with Router 18 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu Check Firmware Ver s io n 150 Hear the version number of the firmware currently running on the Phone Adapter . Check Primary DNS Server IP Address 160 Hear the IP addres s of the primar y DNS (Domain Nam e Serv ice) ser ver . ...

  • Cisco Systems SPA2102 - page 27

    Phone Adapter with Router 19 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu Set Network (or Subnet) Mask 121 Enter the network or subnet mask using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. First, set the Internet Connection T ype to static IP address; otherw ...

  • Cisco Systems SPA2102 - page 28

    Phone Adapter with Router 20 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu Set the Mode 201 Press 0 to select the router/NA T mode. Press 1 to select the bridge/switch mode . If the Phone Adapter acts as the router for your network, use the router/NA T mode. If your network already has a router , use ...

  • Cisco Systems SPA2102 - page 29

    Phone Adapter with Router 21 Chapter 5: Using the Interactive Voice Response Menu Entering a Password Entering a P assword Y ou may be prompted to enter a password when you want to r eset the Phone Adapter to its factory default settings. T o enter the password, use the phone’ s keypad, and follow the appropriate instructions. • T o enter A, B ...

  • Cisco Systems SPA2102 - page 30

    Phone Adapter with Router 22 Chapter 5: Using the Interactive Voice Response Menu Configuring the Settings for You r Internet Phone Service • T o enter P , Q, R, S , o, q, r , or s — press 7 . • T o enter T , U, V , t, u, or v — press 8 . • T o enter W , X, Y , Z, w , x, y , or z — press 9 . • T o enter all other c haracters, pr ess 0 ...

  • Cisco Systems SPA2102 - page 31

    Phone Adapter with Router 23 Chapter 6: Using the Web-based Utility Overview Chapter 6: Using the Web-based Utilit y Overview The Web-based Utility can be accessed via your web brow ser through use of a computer on your network. It offers two levels of access: user and admin (administrator). Y our level of access depends on your service provider’ ...

  • Cisco Systems SPA2102 - page 32

    Phone Adapter with Router 24 Chapter 6: Using the Web-based Utility How to Access the Web-based Utility Voi ce • Info. This screen displays voice-related status information about the Phone Adapter . • System. Use this screen to configure the user password. • User 1. Use this screen to configure call forward, spee d dial, supplementary ser vic ...

  • Cisco Systems SPA2102 - page 33

    Phone Adapter with Router 25 Chapter 6: Using the Web-based Utility The Router Tab The Router T ab The Router - Status Screen This screen displays prod uct and system information. Product Information Product Name . Shown here is the model number of the Phone Adapter . Serial Number . Shown here is the serial number of the Phone Adapter . Software V ...

  • Cisco Systems SPA2102 - page 34

    Phone Adapter with Router 26 Chapter 6: Using the Web-based Utility The Router Tab Current IP . Displayed here is the Inter net IP address of the Phone Adapter . Host Name . Displayed here is the host name of the Phone Adapter . Domain . Displayed here is the domain name of the Phone Adapter . Current Netmask . Displayed here is the netmask or subn ...

  • Cisco Systems SPA2102 - page 35

    Phone Adapter with Router 27 Chapter 6: Using the Web-based Utility The Router Tab The Router - W AN Setup Screen This screen lets you configure th e Internet connection, MAC clone , remote management, QoS , VLAN, and optional settings. Information about your Internet connection type should be provided by your Internet Service Provider (ISP). If yo ...

  • Cisco Systems SPA2102 - page 36

    Phone Adapter with Router 28 Chapter 6: Using the Web-based Utility The Router Tab PPP oE Service Name (optional). Enter the serv ice name provided by your ISP . Optional Settings HostName . Enter the host name , if provided by y our ISP . Domain . Enter the domain name , if provided by your ISP . Primary DNS . Enter the IP address of the primar y ...

  • Cisco Systems SPA2102 - page 37

    Phone Adapter with Router 29 Chapter 6: Using the Web-based Utility The Router Tab Maximum Uplink Speed . Enter the maximum upload speed of your Internet connection. The default is 128Kbps . VLAN (Virtual Local Area Network) Settings Enable VLAN . VLAN (80 2.1Q) settings let you use the Phone Adapter in a virtual LA N environment. Select ye s or no ...

  • Cisco Systems SPA2102 - page 38

    Phone Adapter with Router 30 Chapter 6: Using the Web-based Utility The Router Tab The Router - LAN Se tup Screen This screen lets you configure the local network, dynamic DHCP , and static DHCP lease settings. Networking Service . Select the ser vice you want to use , NA T or Bridge . The default is NA T . LAN Network Settings LAN IP Address . Ent ...

  • Cisco Systems SPA2102 - page 39

    Phone Adapter with Router 31 Chapter 6: Using the Web-based Utility The Router Tab Host MAC Addr ess . Enter the MAC address of the device whose IP address you want to specify . Host IP Address . Enter the IP address you want to assign to the device , 192.168.0.x (x being a different number for each devi ce you specify ). When you have finished mak ...

  • Cisco Systems SPA2102 - page 40

    Phone Adapter with Router 32 Chapter 6: Using the Web-based Utility The Router Tab The Router - Application Scr een This screen lets you configure port forwar di ng, DMZ, and r eserved ports range settings. Port Forwarding Settings Enable . Select ye s or no for each port forwar ding entry , which defines a port range to be forwarded to a server . ...

  • Cisco Systems SPA2102 - page 41

    Phone Adapter with Router 33 Chapter 6: Using the Web-based Utility The Router Tab Miscellaneous Settings Multicast P assthru . Multicasting al lows for multiple transmissions to specif ic recipien ts at the same time . If multicasting is permitted, then the Pho ne Adapter will allow IP multicast packet s to be forw arded to the appropriate co mput ...

  • Cisco Systems SPA2102 - page 42

    Phone Adapter with Router 34 Chapter 6: Using the Web-based Utility The Voice Tab The Voice T ab The Voice - Info Screen This screen shows voice-related settings for the Phone Adapter . Product Information Product Name . Shown here is the model number of the Phone Adapter . Serial Number . Shown here is the serial number of the Phone Adapter . Soft ...

  • Cisco Systems SPA2102 - page 43

    Phone Adapter with Router 35 Chapter 6: Using the Web-based Utility The Voice Tab RTP B yt es S en t . Displayed here is the number of R TP bytes sent by the Phone Adapter . RTP P ackets Recv . Displayed here is the number of RTP packets received b y the Phone Adapter . RTP Bytes Recv . Displayed here is the number of RTP bytes received by the Phon ...

  • Cisco Systems SPA2102 - page 44

    Phone Adapter with Router 36 Chapter 6: Using the Web-based Utility The Voice Tab Call Back Active . This indicates whether a call back request is in progress. Last Called Number . Displayed here is the last number called. Last Caller Number . Displayed here is the number of the last caller . Mapped SIP P ort . Shown here is the port number of the ...

  • Cisco Systems SPA2102 - page 45

    Phone Adapter with Router 37 Chapter 6: Using the Web-based Utility The Voice Tab Call 1/2 P ackets Sent . Displayed here is the number of packets sent. Call 1/2 P ackets Recv . Displayed here is the number of packets received. Call 1/2 Bytes Sent . Displayed here is the number of bytes sent. Call 1/2 Bytes Recv . Displayed here is the number of b ...

  • Cisco Systems SPA2102 - page 46

    Phone Adapter with Router 38 Chapter 6: Using the Web-based Utility The Voice Tab The Voice - System Scr een This screen lets you change the password for user acce ss to the Web-based Utility . System Configuration User P assword . Enter the password for the user . (B y default, there is no password.) When you have finished making your change , cli ...

  • Cisco Systems SPA2102 - page 47

    Phone Adapter with Router 39 Chapter 6: Using the Web-based Utility The Voice Tab The Voice - User 1/2 Scre en Use the appropriate screen to configure settings for each Inter net phone line. Call Forward Settings Enter the call forwarding numbers you w ant to use . Cfwd All Dest . Enter the number for the Call Forward All Service feature (when you ...

  • Cisco Systems SPA2102 - page 48

    Phone Adapter with Router 40 Chapter 6: Using the Web-based Utility The Voice Tab Cfwd Sel3 Dest . Enter the forward number for the Call Forward Selective 3 feature . Cfwd Sel4 Caller . Enter the caller number pattern to tri gger the Call Forward Selective 4 feature . Cfwd Sel4 Dest . Enter the forward number for the Call Forward Selective 4 featur ...

  • Cisco Systems SPA2102 - page 49

    Phone Adapter with Router 41 Chapter 6: Using the Web-based Utility The Voice Tab Speed Dial Settings Speed Dial 2 . Enter the target phone number (or URL) to assign to speed dial 2. Speed Dial 3 . Enter the target phone number (or URL) to assign to speed dial 3. Speed Dial 4 . Enter the target phone number (or URL) to assign to speed dial 4. Speed ...

  • Cisco Systems SPA2102 - page 50

    Phone Adapter with Router 42 Chapter 6: Using the Web-based Utility The Voice Tab CWCID Setting . Select whether you want to enable caller ID for call waiting, yes or no . The default is yes . Dist Ring Setting . Select whether you wa nt to us e the distinctive ring feature , yes or no . The default is yes . Message Waitin g . Select whether you wa ...

  • Cisco Systems SPA2102 - page 51

    Phone Adapter with Router 43 Chapter 6: Using the Web-based Utility The Voice Tab Hold Reminder Ring . Select the ring pattern that will remind you of a c all on hold when the phone is on-hook. Call Back Ring . Selec t the ring pattern fo r call back notification. Cfwd Ring Splash Len . Enter the duration of the ring splash when a call is forw arde ...

  • Cisco Systems SPA2102 - page 52

    Phone Adapter with Router 44 Chapter 6: Using the Web-based Utility The Voice Tab VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 53

    Phone Adapter with Router 45 Appendix A: Troubleshooting Common Problems and Solutions Appendix A: Troubleshooting This appendix provides solutions to pr oblems that may occur during the instal lation and operation of the Phone Adapter . Read the description below to solve your proble ms. If you can' t find an answer her e , check the website ...

  • Cisco Systems SPA2102 - page 54

    Phone Adapter with Router 46 Appendix A: Troubleshooting Common Problems and Solutions C. Click T ools . Click Internet Options . Click the Security tab . Click the Default level button. Make sure the security level is Medium or lower . Then click the OK button. 3. I need to set a static IP address on a PC. The Phone Adapter , by default, assigns a ...

  • Cisco Systems SPA2102 - page 55

    Phone Adapter with Router 47 Appendix A: Troubleshooting Common Problems and Solutions For Windows 2000: A. Click Start , Set tings , and Control P anel . Do uble-click Network and Dial-Up Connections . B . Right-cl ick the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties opt ion. C. In t h ...

  • Cisco Systems SPA2102 - page 56

    Phone Adapter with Router 48 Appendix A: Troubleshooting Common Problems and Solutions D. In t he This connection uses the following items box, highlight Internet Pr otocol (TCP/IP) . Click t he Properties button. E. Enter a unique IP address that is not used by any other computer on the ne twork connect ed to the Phone Adapter . Y ou can only use ...

  • Cisco Systems SPA2102 - page 57

    Phone Adapter with Router 49 Appendix A: Troubleshooting Common Problems and Solutions 4. Click the OK button in the Internet Protocol (TCP/IP) Properties window , and cli ck the OK but ton in the Local Area Connectio n Properties window . 5. Restart the computer if asked. 6. Click the OK button in the Internet Protocol (TCP/IP) Properties window , ...

  • Cisco Systems SPA2102 - page 58

    Phone Adapter with Router 50 Appendix A: Troubleshooting Common Problems and Solutions • If you do NOT get a r eply , check the cable , and make sure Obtain an IP ad dress automatica lly is selected in the TCP/IP settings for you r Ethernet adapter . D . In the command prompt, type ping followed by your Internet IP address and press the Enter key ...

  • Cisco Systems SPA2102 - page 59

    Phone Adapter with Router 51 Appendix A: Troubleshooting Common Problems and Solutions E. Make sure the cable connecting from your cable or DSL modem is connected to the Phone Adapte r’s Internet port. Verify that the Rout er - Status page of the Phone Adap te r’s W eb-based Utility shows a valid IP address from your ISP . F . T urn off the com ...

  • Cisco Systems SPA2102 - page 60

    Phone Adapter with Router 52 Appendix A: Troubleshooting Common Problems and Solutions D . Enter the port range of the service you are using. For example , if you have a web server , you would enter the range 80 (in the Starting Po rt field) to 80 (in the Ending Port field). E. Select the protocol you will be using, TCP or UDP , or select Both . F ...

  • Cisco Systems SPA2102 - page 61

    Phone Adapter with Router 53 Appendix A: Troubleshooting Common Problems and Solutions information on what por t services to use is to go to the website of the on line game or application you want to use . Follow these steps to set up online game hosting or use a certain Internet application: A. Access the Phone Adapter’s W e b-based Utility by g ...

  • Cisco Systems SPA2102 - page 62

    Phone Adapter with Router 54 Appendix A: Troubleshooting Common Problems and Solutions 9. I can’t get the Internet game, server , or application to work. If you are having difficulties getting any Internet game, server , or application to function proper ly , consider exposing one PC to the Internet using DeMi litarized Zone (DMZ) hostin g. This ...

  • Cisco Systems SPA2102 - page 63

    Phone Adapter with Router 55 Appendix A: Troubleshooting Common Problems and Solutions For Microsoft Internet Explorer 5.0 or higher: A. Click Start , Set tings , and Control P anel . Do uble-click Internet Options . B . Click the Connections tab. C. Click the LAN settings button and remove anything that is checked. D . Click the OK button to go ba ...

  • Cisco Systems SPA2102 - page 64

    Phone Adapter with Router 56 Appendix A: Troubleshooting Frequently Asked Questions Frequently Ask ed Questions Can I make Internet phone cal ls if my Internet connection is down? No. When you make Internet phone calls, your high-speed Inter net connection must be active. Can I make calls while I’m br owsing the Internet? Y es. Y ou can make call ...

  • Cisco Systems SPA2102 - page 65

    Phone Adapter with Router 57 Appendix A: Troubleshooting Frequently Asked Questions Does the Phone Adapter support any operatin g system other than Windows 98, Millennium, 2000, or XP? Y es, but Linksys does no t, at this time , provide technical support fo r setup , configuration or troubleshooting of any non-Windows operating systems. Does the Ph ...

  • Cisco Systems SPA2102 - page 66

    Phone Adapter with Router 58 Appendix A: Troubleshooting Frequently Asked Questions the same time , even if on the same LAN (not a proble m with 1.0.1.3). As far as hosting games, the HL server does not need to be in the DMZ. Just forwar d port 27015 to the local IP address of the server computer . How can I block corrupted FTP d ownloads? If you a ...

  • Cisco Systems SPA2102 - page 67

    Phone Adapter with Router 59 Appendix A: Troubleshooting Frequently Asked Questions What is DMZ Hosting? Demilitarized Zone (DMZ) allows one IP address (computer ) to be exposed to the Inte r net. Some applications require multiple TCP/IP ports to be open. It is recommended that you set your computer with a static IP if you want to use DMZ Hosting ...

  • Cisco Systems SPA2102 - page 68

    Phone Adapter with Router 60 Appendix A: Troubleshooting Frequently Asked Questions VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 69

    Phone Adapter with Router 61 Appendix B: Finding the MAC Address and IP Address for Your Ethernet Ad apter Windows 98 or Me Instructions Appendix B: Finding the MAC Address and IP Address for Y our Ethernet Adapter This section describes how to find the MAC address for your computer’ s Et her net adapter so you can use the MAC address cloning fea ...

  • Cisco Systems SPA2102 - page 70

    Phone Adapter with Router 62 Appendix B: Finding the MAC Address and IP Address for Your Ethernet Ad apter Windows 2000 or XP Instructions Windows 2000 or XP Instructions 1. Click Start and Run . In the Open field, enter cmd . Press the Enter k ey or clic k the OK button. 2. At the command prompt, enter ipconfig /all . Then press the Enter key . 3. ...

  • Cisco Systems SPA2102 - page 71

    Phone Adapter with Router 63 Appendix C: Windows Help Appendix C: Windows Help Almost all Linksys products require Mic rosoft Windows. Windows is the most used operating sys tem in the world and comes with many features that help make netw orking easier . These features can be accessed through Windows Help and are desc ribed in this appendix. TCP/I ...

  • Cisco Systems SPA2102 - page 72

    Phone Adapter with Router 64 Appendix C: Windows Help VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 73

    Phone Adapter with Router 65 Appendix D: Glossary Appendix D: Glossar y This glossary contains some basic netw orking term s you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www .linksys.com/glossary . Bandwidth - The transmission capacity of a given device or network. Bit - A binar y ...

  • Cisco Systems SPA2102 - page 74

    Phone Adapter with Router 66 Appendix D: Glossa ry DNS ( D omain N ame S erver) - The IP address of your ISP's server , which translates the name s of websites into IP addresses . Domain - A specific name for a network of computers. Download - T o receive a file transmitted o ver a network. DSL ( D igital S ubscriber L ine) - An always-on broa ...

  • Cisco Systems SPA2102 - page 75

    Phone Adapter with Router 67 Appendix D: Glossary IPCONFIG - A Windows 2000 and XP utility that displ ays the IP address for a particular netwo rking device . ISP ( I nternet S er vice P rovider) - A company that prov ides access to the Internet. LAN - The computers and networking produc ts that make up your local network. MAC ( M edia A ccess C on ...

  • Cisco Systems SPA2102 - page 76

    Phone Adapter with Router 68 Appendix D: Glossa ry Server - Any computer whose function in a network is to provide us er access to files, printi ng, communications, and other services. SMTP ( S imple M ail T ransfer P rotocol) - The standard e-mail prot ocol on the Internet. SNMP ( S imple N etwork M anage ment P rotocol) - A widely used networ k m ...

  • Cisco Systems SPA2102 - page 77

    Phone Adapter with Router 69 Appendix E: Specifications Appendix E: Specifications Model SP A2102 Data Networking MAC Address (IEEE 802.3) IPv4 - Internet Protocol v4 (RFC 791) upg radeable to v6 (RFC 1883) ARP - Address Resolution Protocol DNS - A Record (RFC 1706), SRV Record (RFC 2782) DHCP Client - Dynamic Host Configuration Protocol (RFC 2131) ...

  • Cisco Systems SPA2102 - page 78

    Phone Adapter with Router 70 Appendix E: Specifications Voice Gatew ay SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264) SIP Proxy Redundancy - Dynamic via DNS SRV , A Records Re-registration with Primary SIP Proxy Ser ver SIP Support in Network Address T ranslation Networks - NA T (incl. STUN) Secure (Encrypted) Calling via Pre-St ...

  • Cisco Systems SPA2102 - page 79

    Phone Adapter with Router 71 Appendix E: Specifications VMWI - Visual Message Waiting Indicator via FSK Polarity Control Hook Flash Event Signaling Caller ID Generation (Name & Number) - Bellcore, DTMF , ETSI Music on Hold Client Streaming Audio Server - up to 10 sessions Security Password Protected System Reset to Factory Defa ult Password Pro ...

  • Cisco Systems SPA2102 - page 80

    Phone Adapter with Router 72 Appendix E: Specifications Subscriber Line Interface Circuit (SLIC) Ring Voltage: 40-55 V RMS Configurable Ring Frequency: 10 Hz - 40 Hz Ring Waveform: T rapezoidal and Sinusoidal Maximum Ringer Load: 3 REN On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current: 25 mA min T er minat ...

  • Cisco Systems SPA2102 - page 81

    Phone Adapter with Router 73 Appendix E: Specifications Unit Weight 5.29 oz. (0.15 kg) Operating T emp. 32 to 113º F (0 to 45º C) Storage T emp. -13 to 185º F (-25 to 85º C) Operating Humidity 10 to 90% Non-condensing, operating and non-operating VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 82

    Phone Adapter with Router 74 Appendix E: Specifications VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 83

    Phone Adapter with Router 75 Appendix F: Warranty Information Appendix F: Warrant y Information This Warr anty is valid and may be pr ocesse d only in the country of purchase. Contact y our service provider if the warr anty supp ort issues ar e to be handled by them as per y our service agreements. Linksys warrants to Y ou that, for a period of two ...

  • Cisco Systems SPA2102 - page 84

    Phone Adapter with Router 76 Appendix F: Warranty Information provided under this Agreement fails of its essential purpose . So me jurisdictions do no t allow the exclusion or li mitation of i ncidental or consequen tial damages, so the above limita tion or exclusion may not apply to Y ou. Please direct all inquiries to: Li nksys, P .O. Box 18558, ...

  • Cisco Systems SPA2102 - page 85

    Phone Adapter with Router 77 Appendix G: Regulatory Infor mation Appendix G: Regulator y Information FCC Statement This product has been tested a nd complies with the specificatio ns for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a resid ...

  • Cisco Systems SPA2102 - page 86

    Phone Adapter with Router 78 Appendix G: Regulatory Information Industry Canada (Canada) This device complies with Industry Canada ICES-003 rule. Cet appareil est conforme à la norme NMB003 d'Industri e Canada. EC Declaration of Conformity (Europe) In compliance with the EMC Dire ctive 89/336/EEC , Low Voltage Directive 73/23/EEC , and Amendm ...

  • Cisco Systems SPA2102 - page 87

    Phone Adapter with Router 79 Appendix G: Regulatory Infor mation User Information for Consumer Products Covered by EU Dire ctive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains importan t informatio n for users with rega rds to the proper disposal and recycling of Linksys products. C onsumers are r equired to com ...

  • Cisco Systems SPA2102 - page 88

    Phone Adapter with Router 80 Appendix G: Regulatory Information VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 89

    Phone Adapter with Router 81 Appendix G: Regulatory Infor mation VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 90

    Phone Adapter with Router 82 Appendix G: Regulatory Information VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 91

    Phone Adapter with Router 83 Appendix G: Regulatory Infor mation VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 92

    Phone Adapter with Router 84 Appendix G: Regulatory Information VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 93

    Phone Adapter with Router 85 Appendix H: Contact Information Internet Telephony Service Provider (ITSP) Appendix H: Contact Information Internet T elephony Service Provider (ITSP) For support, contact your ITSP . Linksys Visit Linksys online for information on the latest prod ucts and updates to your existing products at: http://www .linksys.com Vo ...

  • Cisco Systems SPA2102 - page 94

    Phone Adapter with Router 86 Appendi x H: Contac t Informat ion Linksys VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 95

    VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

  • Cisco Systems SPA2102 - page 96

    www .linksys.com VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 ...

Manufacturer Cisco Systems Category Network Card

Documents that we receive from a manufacturer of a Cisco Systems SPA2102 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- SPA2102 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems SPA2102
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems SPA2102.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems SPA2102, service manual, brief instructions and user manuals Cisco Systems SPA2102. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems SPA2102.

Similar manuals

A complete manual for the device Cisco Systems SPA2102, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems SPA2102 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems SPA2102.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems SPA2102 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems SPA2102, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems SPA2102, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems SPA2102 - which should help us in our first steps of using Cisco Systems SPA2102
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems SPA2102
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems SPA2102 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems SPA2102?

Use the form below

If you did not solve your problem by using a manual Cisco Systems SPA2102, ask a question using the form below. If a user had a similar problem with Cisco Systems SPA2102 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)