Manual Compaq 3000

137 pages 3.05 mb
Download

Go to site of 137

Summary
  • Compaq 3000 - page 1

    ProLiant 3000 Setup and Installation Guide Second Edition (April 1998) Part Number 296908-002 Compaq Computer Corporation ...

  • Compaq 3000 - page 2

    Notice The information in this publication is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED “AS IS” AND ...

  • Compaq 3000 - page 3

    iii ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Contents About This Guide How this Manual is Organized ............................................................ ...

  • Compaq 3000 - page 4

    iv About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Compaq ProLiant 3000 Server Features continued Security Features ............................................................................. ...

  • Compaq 3000 - page 5

    v ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 4 Installing Hardware Options Accessing Non Hot-Plug Areas................................................... ...

  • Compaq 3000 - page 6

    vi About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 6 Integrated Management Integrated Management Display ................................................................................ ...

  • Compaq 3000 - page 7

    vii ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Appendix C Internal CD-ROM Drive Index ...

  • Compaq 3000 - page 8

    viii About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED About This Guide The Compaq ProLiant 3000 Setup and Installation Guide is intended to help you set up your server for optimal performance. U ...

  • Compaq 3000 - page 9

    ix ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Text Conventions This document uses the following conventions to distinguish elements of text: Keys Keys appear in b ...

  • Compaq 3000 - page 10

    x About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Symbols in Text These symbols may be found in the text of this guide. They have the following meanings. ! WARNING: Indicates that failure to fo ...

  • Compaq 3000 - page 11

    xi ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Any RJ-45 receptacle marked with these symbols indicates a Network Interface Connection. WARNING: To reduce the risk ...

  • Compaq 3000 - page 12

    xii About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Getting Help If you have a problem and have exhausted the information in this guide, you can get further information and other help in the fo ...

  • Compaq 3000 - page 13

    xiii ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Compaq Management CD Compaq Management CD is located in Server Setup and Management pack and contains:  Insi ...

  • Compaq 3000 - page 14

    xiv About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Telephone Numbers For the name of your nearest Compaq Authorized Reseller: In the United States, call 1-800-345-1518 In Canada, call 1-800-26 ...

  • Compaq 3000 - page 15

    xv ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Compaq Worldwide Technical Support Telephone Numbers continued Location Voice FAX Europe/Middle East/Africa (49) 089 ...

  • Compaq 3000 - page 16

    xvi About This Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: A-FRNT.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Compaq Worldwide Technical Support Telephone Numbers continued Location Voice FAX Europe/Middle East/Africa (49) 089-9933-2891 Finland 9800-2 ...

  • Compaq 3000 - page 17

    1-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 1 Compaq ProLiant 3000 Server Features Compaq ProLiant 3000 servers deliver state-of-the-art Intel Pentium ...

  • Compaq 3000 - page 18

    1-2 Compaq ProLiant 3000 Server Features Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Cache Memory and System Architecture ■ 512-KB secondary (L2) cache ■ Compaq ProLiant 3000 System Architecture with Du ...

  • Compaq 3000 - page 19

    1-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Media Bays The Compaq ProLiant 3000 server can house up to 12 mass storage devices. ■ Internal Drives - the serve ...

  • Compaq 3000 - page 20

    1-4 Compaq ProLiant 3000 Server Features Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED SCSI ■ Dual Channel Integrated Wide-Ultra SCSI-3 controller ■ The following optional controller boards are currently ...

  • Compaq 3000 - page 21

    1-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED ■ Integrated Management Display (IMD) offers a text-based user interface. The IMD displays and stores key system ...

  • Compaq 3000 - page 22

    1-6 Compaq ProLiant 3000 Server Features Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Management and Configuration Tools Compaq offers an extensive set of features and optional tools to support effective ser ...

  • Compaq 3000 - page 23

    1-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Disk Drive Fault Tolerance Disk drive fault tolerance for Compaq servers is covered in more detail in the Compaq Se ...

  • Compaq 3000 - page 24

    1-8 Compaq ProLiant 3000 Server Features Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Automatic Server Recovery-2 (ASR2) If there is a critical system failure, Automatic Server Recovery-2 allows you to resta ...

  • Compaq 3000 - page 25

    1-9 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Compaq Integrated Remote Console When the Compaq ProLiant 3000 server is equipped with an optional supported modem, ...

  • Compaq 3000 - page 26

    1-10 Compaq ProLiant 3000 Server Features Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED ■ Ease of Use - The Integrated Management Display provides a 16x4 character display and four button control panel to e ...

  • Compaq 3000 - page 27

    1-11 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Interlock Switches WARNING: To reduce the risk of personal injury from contact with hazardous energy, the equipmen ...

  • Compaq 3000 - page 28

    2-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 2 Installation Overview This chapter presents an overview of the installation and configuration procedure f ...

  • Compaq 3000 - page 29

    2-2 Installation Overview Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Server Warnings and Precautions WARNING: To reduce the risk of personal injury from hot surfaces, allow the hot plug drives and internal ...

  • Compaq 3000 - page 30

    2-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Pre-installation Planning This section discusses the power, grounding, and temperature requirements of the Compaq P ...

  • Compaq 3000 - page 31

    2-4 Installation Overview Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED This product is also designed for IT power system with Phase to Phase voltage 230 V. For electrical power ratings on options, refer to t ...

  • Compaq 3000 - page 32

    2-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Installation Procedure There are two installation procedures presented in the following paragraphs. Each procedure ...

  • Compaq 3000 - page 33

    2-6 Installation Overview Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 12. Connect cables: keyboard, mouse, monitor, network, and power cables. See Cabling Guidelines for Compaq ProLiant 3000 Servers. 13. Tu ...

  • Compaq 3000 - page 34

    2-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: C-CH02.DOC Last Saved On: 1/27/98 4:14 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED For complete details on the SmartStart program, read the SmartStart installation card included in your SmartStart p ...

  • Compaq 3000 - page 35

    3-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 3 Rack-Mount Server Installation This chapter covers the following information: ■ How to attach the mount ...

  • Compaq 3000 - page 36

    3-2 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED WARNING: To reduce the risk of personal injury or damage to the equipment, at least two people are needed to safely unload the ...

  • Compaq 3000 - page 37

    3-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Rack Temperature Requirements The operating temperature inside the rack will always be higher than the room tempera ...

  • Compaq 3000 - page 38

    3-4 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Airflow Requirements Compaq ProLiant rackmountable servers draw cool air in through the front door and exhaust warm air out the ...

  • Compaq 3000 - page 39

    3-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Unpacking the Server Unpack the server box and locate the materials and documentation necessary to install your rac ...

  • Compaq 3000 - page 40

    3-6 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Contents of the rack model server box include ■ Compaq ProLiant 3000 server ■ Cables - see Cabling Guidelines for Compaq Pr ...

  • Compaq 3000 - page 41

    3-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED In addition to these supplied items, you may need: ■ Torx T-15 screwdriver ■ Phillips screwdriver ■ Slotted s ...

  • Compaq 3000 - page 42

    3-8 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Preparing the Mounting Brackets and Slide Rail Assemblies Each pair of mounting brackets, with attached slide rail assemblies, ...

  • Compaq 3000 - page 43

    3-9 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 3-3. Slide rail assembly (outer bracket rail and inner component rail) IMPORTANT: To make the installation o ...

  • Compaq 3000 - page 44

    3-10 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 3-4. Removing the component rail from the bracket rail 3. Put the component rails to one side. You will attach them to ...

  • Compaq 3000 - page 45

    3-11 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED The bracket rail consists of a fixed outer rail that screws to the rack mounting bracket, and an inner slide on a ...

  • Compaq 3000 - page 46

    3-12 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 5. Extend the inner slide from the front of the bracket rail. With this piece extended, you will see two screw holes aligned i ...

  • Compaq 3000 - page 47

    3-13 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 1 2 3 26 22 Figure 3-7. Attaching the bracket rail to the mounting bracket You will use a total of four 8-32 x 1/4 ...

  • Compaq 3000 - page 48

    3-14 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Attaching the Mounting Bracket Slide Assembly to the Rack WARNING: To reduce the risk of personal injury or damage to the equi ...

  • Compaq 3000 - page 49

    3-15 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED IMPORTANT: The template is two-sided (front and back) and printed with arrows that show you where the screws will ...

  • Compaq 3000 - page 50

    3-16 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 3-8. Measuring with the template 3. After marking the front of the rack, turn the template over and mark the back rails ...

  • Compaq 3000 - page 51

    3-17 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 3. Insert the tip of the fitting tool through the other side of the perforation and hook the opposite lip of the c ...

  • Compaq 3000 - page 52

    3-18 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 1. Attach a mounting bracket assembly to the front of the rack first, using one M6 x 1.0-12L Phillips screw in the bottom hole ...

  • Compaq 3000 - page 53

    3-19 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED CZR4-012.eps Top View Figure 3-11. Cage nut and back of mounting bracket assembly installed 4. After attaching bot ...

  • Compaq 3000 - page 54

    3-20 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Attaching Component Rails to the Server 1. Place the tab on a component rail at the front of the server chassis. The holes in ...

  • Compaq 3000 - page 55

    3-21 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Attaching the Cable Management Arm Bracket The cable management arm bracket fastens to the top right rear of the r ...

  • Compaq 3000 - page 56

    3-22 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Loading the Rack Server Load and secure the server to the rack with the face plate thumbscrews before continuing to attach any ...

  • Compaq 3000 - page 57

    3-23 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 1. Pull the slide rails forward from the mounting brackets. 2. Carefully align the server's component rails w ...

  • Compaq 3000 - page 58

    3-24 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED WARNING: To reduce the risk of personal injury, be careful when pressing the component rail release latches and sliding the co ...

  • Compaq 3000 - page 59

    3-25 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 1. For easier handling, first slide the server into the rack, then attach the cable management arm to the cable ma ...

  • Compaq 3000 - page 60

    3-26 Rack-Mount Server Installation Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 3-16. Attaching the cable management arm to the rear brace of the rack Attaching the Optional Cable Support The optiona ...

  • Compaq 3000 - page 61

    3-27 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: D-CH03.DOC Last Saved On: 3/10/98 9:30 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 3-17. Attaching the cable support to the rack Optional Installation Service The installation service covers ...

  • Compaq 3000 - page 62

    4-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 4 Installing Hardware Options This chapter is divided into two major parts as follows: ■ Accessing Non Ho ...

  • Compaq 3000 - page 63

    4-2 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Accessing Non Hot-Plug Areas To install options, upgrades or replacements in these areas, you must first shut down the server powe ...

  • Compaq 3000 - page 64

    4-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 1. Back up your server data. 2. Shut down the operating system in an orderly manner as directed in your operating s ...

  • Compaq 3000 - page 65

    4-4 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 6. Slide the side cover toward the rear of the unit about 1 inch (2.5 cm); then remove the cover. NOTE : When you remove the acces ...

  • Compaq 3000 - page 66

    4-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 1 2 1 Figure 4-2. Removing the terminator board 2. To install a Pentium II processor board, follow the instructions ...

  • Compaq 3000 - page 67

    4-6 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Accessing Other System Board Components With the top panel and processor boards removed, as described in the previous steps, you s ...

  • Compaq 3000 - page 68

    4-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED System Board Switches The following table defines the six switches on the system board. The Open (OFF) position is ...

  • Compaq 3000 - page 69

    4-8 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 4-5. Removing the memory board 2. Install DIMMs as shown in Figure 4-6. For information on memory banks, see the following ...

  • Compaq 3000 - page 70

    4-9 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 3. Install the memory board as shown in Figure 4-7. Figure 4-7. Installing memory board Memory Banks In the Compaq ...

  • Compaq 3000 - page 71

    4-10 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED J1 J2 J3 J4 Bank 1 Bank 2 Figure 4-8. Memory banks on the system board J12 J11 J10 J9 J8 J7 J6 J5 Note: Both sock ets in a memor ...

  • Compaq 3000 - page 72

    4-11 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED For the best performance, DIMM banks should be added in the following order: First: Bank 3 (as shipped) Bank 1 (sy ...

  • Compaq 3000 - page 73

    4-12 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 2. Remove the fans and set them aside. You should not have to remove the cables to the fans. CAUTION: Never power up the server i ...

  • Compaq 3000 - page 74

    4-13 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 3. Unlock the server, open the front panel, and slide the front panel up and away from the server. Figure 4-11. Re ...

  • Compaq 3000 - page 75

    4-14 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 4-12. Partially pull out the drive cage Figure 4-13. Drive cage latch 6. Remove all cables from the back of the drive cage ...

  • Compaq 3000 - page 76

    4-15 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED If you have removed the drive cage in order to install the Duplex Enable board, procedure with the next topic, “ ...

  • Compaq 3000 - page 77

    4-16 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 2/2/98 12:31 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED b) Insert the Duplex Enable board. Figure 4-15. Installing the duplex enable board CAUTION: The SCSI backplane board must have ei ...

  • Compaq 3000 - page 78

    4-17 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 4-16. Re-installing the drive cage ...

  • Compaq 3000 - page 79

    4-18 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 9. Reconnect the SCSI cables on the back of the drive cage. Refer to Figure 4-19 connector identification. Refer to Cabling Guide ...

  • Compaq 3000 - page 80

    4-19 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 4-18. Example cable connection to SCSI controller 13. Replace fans. Replacing the Side Access Panel Reverse ...

  • Compaq 3000 - page 81

    4-20 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Interlock System The interlock system prevents power distribution throughout the system if any of the following conditions exist: ...

  • Compaq 3000 - page 82

    4-21 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Accessing DIMM Sockets on the System Board WARNING: Before removing the top panel, ensure that the computer is tur ...

  • Compaq 3000 - page 83

    4-22 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 3. Install DIMMs. You must add memory by bank, that is, a set of 2 EDO buffered DIMMs at a time. Each bank should contain DIMMs o ...

  • Compaq 3000 - page 84

    4-23 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Accessing Hot-Plug Areas This section describes accessing the following areas: ■ Hot-Plug SCSI Drives ■ Hot-Pl ...

  • Compaq 3000 - page 85

    4-24 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED 2 1 Figure 4-22. Installing a SCSI drive IMPORTANT: If the drive cage is configured for simplex mode (Pass- Thru board installed) ...

  • Compaq 3000 - page 86

    4-25 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED SCSI ID Numbers There are four possible numbering schemes depending on whether you are using 1-inch height drives, ...

  • Compaq 3000 - page 87

    4-26 Installing Hardware Options Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED SCSI Channel A or Channel B 36 15 04 Figure 4-24. SCSI ID Numbers - Single SCSI Channel (Simplex Mode) with 1.6-inch drives SCSI ...

  • Compaq 3000 - page 88

    4-27 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Pre-Failure Warranty The Compaq ProLiant 3000 server includes Pre-Failure Warranty for Pentium II processors, hard ...

  • Compaq 3000 - page 89

    5-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 5 Server Configuration and Utilities This chapter describes the tools that Compaq provides to assist you in ...

  • Compaq 3000 - page 90

    5-2 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Figure 5-1. Inserting the CD-ROM 3. When the busy indicator turns on, the drive is ready to receive commands and data may b ...

  • Compaq 3000 - page 91

    5-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Using the System Configuration Utility The Compaq System Configuration Utility performs a wide range of configurati ...

  • Compaq 3000 - page 92

    5-4 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED For PCI boards, the utility reads the configuration options from the PCI board's configuration space from a PCI config ...

  • Compaq 3000 - page 93

    5-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Starting the System Configuration Utility To start the Compaq System Configuration Utility for the first time, refe ...

  • Compaq 3000 - page 94

    5-6 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED System Configuration Utility Main Menu This overview of the main menu options overview explains how to access the main menu ...

  • Compaq 3000 - page 95

    5-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Configuring Hardware When you select the Configure Hardware menu, a screen with five steps is displayed. Below is a ...

  • Compaq 3000 - page 96

    5-8 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Setting Power-On Defaults You can set and change the Power-On features at any time. 1. Select System Configuration from the ...

  • Compaq 3000 - page 97

    5-9 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Creating a New System Partition If you used SmartStart to configure your server and install your operating system, ...

  • Compaq 3000 - page 98

    5-10 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Verifying the System Partition To verify that the system partition exists, follow this procedure: 1. Remove any media from ...

  • Compaq 3000 - page 99

    5-11 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Configuration Backup The Configuration Backup option allows you to create a backup of the system configuration and ...

  • Compaq 3000 - page 100

    5-12 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Table 5-1 System Configuration History Log Files Filename Description SYSTEM.SCI Current configuration information SYSTEM1 ...

  • Compaq 3000 - page 101

    5-13 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Configuring PCI Boards Automatically The system ROM automatically configures PCI boards. If a user selection is re ...

  • Compaq 3000 - page 102

    5-14 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Not all operating systems ship with each server. Consult your local reseller or Compaq Customer Service to get a SmartStar ...

  • Compaq 3000 - page 103

    5-15 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Loading Compaq Device Drivers Drivers are located on the Compaq SmartStart and Support Software CD. IMPORTANT: Alw ...

  • Compaq 3000 - page 104

    5-16 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Microsoft Windows NT Device Drivers from Compaq Drivers are supplied to support Windows NT 3.51 and 4.0. They are located ...

  • Compaq 3000 - page 105

    5-17 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED SCO OpenServer and SCO UnixWare Device Drivers from Compaq Your server must have certain device drivers to operate ...

  • Compaq 3000 - page 106

    5-18 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Manual installation If you choose not to let SmartStart configure the server, follow this procedure: 1. Insert the Compaq ...

  • Compaq 3000 - page 107

    5-19 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Banyan VINES Device Drivers from Compaq Your server must have certain device drivers for some server options to op ...

  • Compaq 3000 - page 108

    5-20 Server Configuration and Utilities Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Diagnostics and Other Utilities ■ When you select the Diagnostics and Utilities feature from the System Configuration Ut ...

  • Compaq 3000 - page 109

    6-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Chapter 6 Integrated Management This chapter contains instructions and guidelines for using the Integrated Manageme ...

  • Compaq 3000 - page 110

    6-2 Integrated Management Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED If there are no errors, you will see the Idle Screen Text. Figure 6-1 shows the default screen, but this screen could be different if yo ...

  • Compaq 3000 - page 111

    6-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Navigation Buttons To navigate through the menus, use the four buttons shown in Figure 6-2. The Up and Down arrow k ...

  • Compaq 3000 - page 112

    6-4 Integrated Management Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Display Symbols There are three different display symbols used to indicate your options as you scroll through the menus. These on screen ...

  • Compaq 3000 - page 113

    6-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED System Behavior with Error Events After system POST, if there is an F1 error condition, the IMD flashes this messag ...

  • Compaq 3000 - page 114

    6-6 Integrated Management Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Menu Structure The following outline shows the structure of each menu and submenu in the order in which it appears: Events Event List Ad ...

  • Compaq 3000 - page 115

    6-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Integrated Management Log The Compaq Integrated Management Log (IML) records system events and stores them in an ea ...

  • Compaq 3000 - page 116

    6-8 Integrated Management Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Multiple Ways of Viewing the Log You can view an event in the Integrated Management Log in several ways: ■ On the Integrated Managemen ...

  • Compaq 3000 - page 117

    6-9 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Viewing the Event List 1. From Compaq Insight Manager, select the appropriate server, then select View Device Data. ...

  • Compaq 3000 - page 118

    6-10 Integrated Management Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Compaq Survey Utility The Compaq Survey Utility is a serviceability tool available for Windows NT and Novell NetWare that delivers on-l ...

  • Compaq 3000 - page 119

    6-11 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED List of Events The event list displays the affected components and the associated error messages. Though the same ...

  • Compaq 3000 - page 120

    6-12 Integrated Management Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Table 6-2 Event Messages Event Type Event Message Machine Environment Fan Failure Fan Inserted Fan Removed Fans Not Redundant Overheat ...

  • Compaq 3000 - page 121

    6-13 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Event Messages continued Event Type Event Message POST Error POST Error: Error message Power Subsystem Power Suppl ...

  • Compaq 3000 - page 122

    A-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: H-APPA.DOC Last Saved On: 1/27/98 4:24 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Appendix A Power Cord Set Requirements The power cord set meets the requirements for use in the country where you p ...

  • Compaq 3000 - page 123

    A-2 Power Cord Set Requirements Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: H-APPA.DOC Last Saved On: 1/27/98 4:24 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Country-Specific Requirements Use the following table to identify the appropriate accredited agency in your country. Table A-1 Pow ...

  • Compaq 3000 - page 124

    B-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Appendix B Regulatory Compliance Notices Federal Communications Commission Notice Part 15 of the Federal Communicat ...

  • Compaq 3000 - page 125

    B-2 Regulatory Compliance Notices Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Class A Equipment This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P ...

  • Compaq 3000 - page 126

    B-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 o ...

  • Compaq 3000 - page 127

    B-4 Regulatory Compliance Notices Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Canadian Notice(Avis Canadien) Class B Equipment This Class B digital apparatus meets all requirements of the Canadian Interfere ...

  • Compaq 3000 - page 128

    B-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Japanese Notice Australian Notice This customer equipment is to be installed and maintained by service personnel as ...

  • Compaq 3000 - page 129

    B-6 Regulatory Compliance Notices Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Laser Devices The CD-ROM drive contains a laser device. All Compaq systems equipped with a laser device comply with safety stand ...

  • Compaq 3000 - page 130

    B-7 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Laser Product Label The following label or equivalent is located on the surface of your CD-ROM drive. This label in ...

  • Compaq 3000 - page 131

    B-8 Regulatory Compliance Notices Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: I-APPB.DOC Last Saved On: 1/27/98 4:28 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Battery Replacement Notice Your computer is provided with a battery powered Real-Time Clock circuit. There is a danger of explos ...

  • Compaq 3000 - page 132

    C-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002 File Name: J-APPC.DOC Last Saved On: 3/10/98 10:08 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Appendix C Internal CD-ROM Drive The Internal CD-ROM drive is a random access, read-only storage device capable of ...

  • Compaq 3000 - page 133

    Index-1 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: File Name: K-INDX.DOC Last Saved On: 1/27/98 4:43 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Index . .CFG files 5-3 .PCF files 5-4 A Accessing DIMM sockets on Memory board 4-8 DIMM sockets on system board 4-21 drive ...

  • Compaq 3000 - page 134

    I ndex -2 Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: File Name: K-INDX.DOC Last Saved On: 1/27/98 4:43 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED adding 4-22 banks 4-22 removing 5-13 Disassembly 4-1 Diskette drive 1-3 Display Symbols, IMD 6-4 Drive cage connectors 4-18 removal 4-11 Drivers See Device drivers ...

  • Compaq 3000 - page 135

    Index-3 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: File Name: K-INDX.DOC Last Saved On: 1/27/98 4:43 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Integrated Management Log 6-5 Integrated Remote Console 1-9 Interlock switch 4-4 system 4-20 Interlock switch features 1-1 ...

  • Compaq 3000 - page 136

    I ndex -4 Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: File Name: K-INDX.DOC Last Saved On: 1/27/98 4:43 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED IMD messages 6-1 operations 6-1 Power-on, setting defaults 5-8 Pre-Failure Insight Manager alert 4-27 Warranty 4-27 Processor accessing 4-2 boards 1-1 Pre-Failure ...

  • Compaq 3000 - page 137

    Index-5 ProLiant 3000 Setup and Installation Guide Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: File Name: K-INDX.DOC Last Saved On: 1/27/98 4:43 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED CD 5-1 creating system partition 5-9 device drivers for Banyan VINES 5-19 for IBM OS/2 5-18 for Novell NetWare 5-15 for SC ...

Manufacturer Compaq Category Computer Hardware

Documents that we receive from a manufacturer of a Compaq 3000 can be divided into several groups. They are, among others:
- Compaq technical drawings
- 3000 manuals
- Compaq product data sheets
- information booklets
- or energy labels Compaq 3000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Compaq 3000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Compaq 3000, service manual, brief instructions and user manuals Compaq 3000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Compaq 3000.

Similar manuals

A complete manual for the device Compaq 3000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Compaq 3000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Compaq 3000.

A complete Compaq manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Compaq 3000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Compaq 3000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Compaq 3000, that we can find in the current document
3. Tips how to use the basic functions of the device Compaq 3000 - which should help us in our first steps of using Compaq 3000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Compaq 3000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Compaq 3000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Compaq 3000?

Use the form below

If you did not solve your problem by using a manual Compaq 3000, ask a question using the form below. If a user had a similar problem with Compaq 3000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)