Manual Cisco Systems AIRCAP3602ITK9

40 pages 1.28 mb
Download

Go to site of 40

Summary
  • Cisco Systems AIRCAP3602ITK9 - page 1

    G ETTING S TARTED G UIDE Cisco Aironet 3600 Series Lightweight Access Points 1 About this Guide 2 Introduction to the Access P oint 3 Safety In structions 4 Unpac king 5 Configuratio ns 6 Access Point P orts and Connectors 7 Configuring the Access P oint 8 Mounting the Access P oint 9 Deploying the Access Point on the Wireless Network 10 Installing ...

  • Cisco Systems AIRCAP3602ITK9 - page 2

    2 1 About this Guide This Guide provides in structions on how to inst all and configure your Cisco Aironet 3600 Series Access Point and how to install any port modules. This guide also provides mounting instructions and limited troubleshooting procedures. The 3600 Series Access Point is referred to as the access point in this document. 2 Introducti ...

  • Cisco Systems AIRCAP3602ITK9 - page 3

    3 – Throughput, forwarding, and filtering performanc e scaled to meet 3 spatial stream 450 Mbps data-rates • 32 MB flas h size • 802.11af/at – CDP (Cisco Discovery Protocol) • 2.4 GHz and 5 GHz 802.11n radios with the following features: – 4TX x 4RX – 3-spatial streams, 450 Mbps PHY rate – Spectrum intelligence – DPD (Digital Pre- ...

  • Cisco Systems AIRCAP3602ITK9 - page 4

    4 War n in g Installation of the equipme nt must comply with local and national electric al codes. Statement 1074 War n in g This product relies on the building’ s installation for short-circuit (o vercurrent) protection. Ensure tha t the protective device is rated not greater than: 20A. Statement 1005 War n in g Do not operate your wirel ess net ...

  • Cisco Systems AIRCAP3602ITK9 - page 5

    5 4 Unpacking T o unpack the access point , follow these steps: Step 1 Unpack and remove the acce ss point and the accessory kit from the shipping box. Step 2 Return any pa cking material to the shippi n g container and save it for future use. Step 3 V erify that you hav e received the items listed below . If any item is missing or damaged, contact ...

  • Cisco Systems AIRCAP3602ITK9 - page 6

    6 • AIR-ANT2524DG-R • AIR-ANT2524V4C-R • AIR-ANT2544V4M-R • AIR-ANT2566P4W -R Internal Antennas The 3602I model access point is configured with four dual-band inverted-F antennas, and two 2.4-GHz/5-GHz dual-band radios. There are four antennas d eployed inside the access point with one deployed on each corner of the 3602I access point top h ...

  • Cisco Systems AIRCAP3602ITK9 - page 7

    7 6 Access Point Ports and Connectors The 3602E model access point has external antenna co nnectors and the LED indictor on th e top of the model, as shown in Figure 1 . The 3602I model a ccess point has inte grated antennas a nd does not have external connectors on the top of the unit; however , it does have the LED indicator on top of the unit, a ...

  • Cisco Systems AIRCAP3602ITK9 - page 8

    8 Figur e 2 Access P oint LED Indi cator (top)— 3 602I Model The ports and connections on the bottom of the access point are shown in Figure 3 . Figur e 3 Access Point P orts and Connection s (bott om)-AIR36 02E and 3602I Mode ls 1 LED indicator 1 272377 2 3 4 1 5 6 6 ...

  • Cisco Systems AIRCAP3602ITK9 - page 9

    9 7 Configuring the Access Point This section describes how to connect the access point to a wireless LAN controller . Because the configuration process takes plac e on the controller , see the Cisco Wireless LAN Controller Configuration Guide for additional information. This gu ide is available on Cisco.com. The Controller Discovery Process The ac ...

  • Cisco Systems AIRCAP3602ITK9 - page 10

    10 Note Y ou cannot edit or query any ac cess poin t using the controlle r CLI if the name of the access point contains a space. Note Make sure that the controller is set to the curren t time. If the controller is set to a time that has already occurred, the access point might not join the controller because its certificate may not be valid for tha ...

  • Cisco Systems AIRCAP3602ITK9 - page 11

    11 • Access point mounting options: below a suspended ceiling, on a fla t horizontal surface, or on a desktop. Note Y ou can mount the access point above a suspended cei ling but you must purchase additional mounting ha rdware: See “Mounting th e Access Point” sec tion on page 15 for additional information. • Access point power options: pow ...

  • Cisco Systems AIRCAP3602ITK9 - page 12

    12 Pre-Installation Configuration Setup The pre-installation configuration setup is shown in Figure 4 . Figure 4 Pr e-Instal lation Configuration Setup T o perform pre-installation configuration, perform the followin g steps: Step 1 Make sure that the Cisco wireless LAN controller DS port is connected to the network. Use the CLI, web-browser interf ...

  • Cisco Systems AIRCAP3602ITK9 - page 13

    13 e. CAPW AP UDP ports must not be blocked in the network. f. The access point must be able to find the IP address of the controller . This can be accomplished using DHCP , DNS, or IP subnet broadcast. This guide describes the DHCP method to convey the controller IP addres s. For other methods, refer to the product documentation. See also the “U ...

  • Cisco Systems AIRCAP3602ITK9 - page 14

    14 c. If the access point shuts down, check the power source. d. After the access point finds the Cisco wireless LAN controller, it attempts to download the new operating system code if the access point code version differs from the Cisco wireless LAN controller code version. While this is happening, the Status LED blinks dark blue. e. If the opera ...

  • Cisco Systems AIRCAP3602ITK9 - page 15

    15 8 Mounting the Access Point Cisco Aironet 3602 series access point can be m ounted in several configurations, including on a suspended ceiling, on a hard ceiling or wall , on an electrical or network b ox, and above a su spended ceiling. Click this URL to browse to comp lete access point mounting instructions: http://www.cisco.com/en/US/docs/wir ...

  • Cisco Systems AIRCAP3602ITK9 - page 16

    16 10 Installing Modules Modules are devices that are purchased as sepe rate items. When they are instal led in the Cisco Aironet 3600 series access point, they give the access point additional capabilities. Modules connect to the access point’ s modul e port. No special tools are required to install a module. Installing a Module Follow these ste ...

  • Cisco Systems AIRCAP3602ITK9 - page 17

    17 Step 4 Align the module’ s connector with the connector on the back of the access point and click the module into place. Step 5 Screw down the thumb screws on the module. Note If the screws are not tightened, the module will not be recognized and may not operate correctly . Make sure not to over -ti ghten, only hand-tighten the screws. Step 6 ...

  • Cisco Systems AIRCAP3602ITK9 - page 18

    18 11 Troubleshooting If you experience difficulty getti ng your access point installed and running, lo ok for a solution to your problem in this guide or in additional access po int documentation. These, and other documents, are available on Cisco.com. Guidelines for Using Cisco Ai ronet Lightweigh t Access Points Keep these guidelines in mind whe ...

  • Cisco Systems AIRCAP3602ITK9 - page 19

    19 Figur e 5 Access P oint LED Location The access point status LED indicates va rious conditions and are described in Table 1 . 1 Status LED T able 1 LED Status Indicati ons Message Ty p e Status LED Message Meaning Boot loader status sequence Blinking green DRAM memory test in progress DRAM memory test OK Board initialization in progress Initiali ...

  • Cisco Systems AIRCAP3602ITK9 - page 20

    20 Operatin g status Blinking blue Software upgrade in progr ess Cycling through green, red, and off Discovery/join process in progress Rapidly cycling through blue, green, and red Access point locati on co mmand invoked Blinking red Ethernet link not operationa l in FlexConnect mode Boot loader warnings Blinking blue Conf iguration recovery in pro ...

  • Cisco Systems AIRCAP3602ITK9 - page 21

    21 Troubleshooting the Ac cess Point Join Process Access points can fail to join a controller for many reasons: a R ADIUS auth orization is pending; self-signed certificat es are not enabled on the cont roller; the access point’ s and controller’ s regulatory domains don’ t match, a nd so on. Controller software enables you to configure the a ...

  • Cisco Systems AIRCAP3602ITK9 - page 22

    22 • The access point is still connected to the same cont roller , and the global syslog server IP address configuration on the controller has been changed using the config ap syslog host global syslog_server_ IP_address command. In this case, the controller sends the new global syslog server IP address to the access point. • The access point i ...

  • Cisco Systems AIRCAP3602ITK9 - page 23

    23 Manufacturer: Cisco Systems, Inc. 170 W est T asman Drive San Jose, CA 95134-1706 USA This device complies with Part 15 rules. Operation is subject to the followin g two conditions: 1. This device may not cause harmful interferenc e , and 2. This device must accept any interference received, incl uding interference that may cause undesired opera ...

  • Cisco Systems AIRCAP3602ITK9 - page 24

    24 Caution The Part 15 radio device operates on a non- interference basis with other devices operating at this frequency when using the integrated antennas. Any changes or modi fication to the product not expressly approved by Cisco could void the user’ s authority to operate this device. Caution W ithin the 5. 15 to 5.25 GHz and 5.47-5.725 G Hz ...

  • Cisco Systems AIRCAP3602ITK9 - page 25

    25 Guidelines for Operating Cisco Aironet Access Points in Japan This section provides guidelines for avoiding interf erence when operating Cisc o Aironet access points in Japan. These guidelines are p rovided in both Japanese and English. Japanese Translation English Translation This equipment operates in the same frequency band width as industri ...

  • Cisco Systems AIRCAP3602ITK9 - page 26

    26 Statement 371—Power Cable and AC Adapter English Translation When installing th e product, please use the provided or d esignated connection cable s/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the ...

  • Cisco Systems AIRCAP3602ITK9 - page 27

    27 Cet appareil numerique de la classe B respecte le s exigences du R eglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operatio n is subject to the follo wing two conditions: 1. This device may not cause harmful interferenc e , and 2. This device must accept any interference received, incl u ...

  • Cisco Systems AIRCAP3602ITK9 - page 28

    28 Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC & Medical Directive 93/42/EEC ...

  • Cisco Systems AIRCAP3602ITK9 - page 29

    29 The following standards were applied: EMC—EN 301.489-1 v1.8.1; EN 301.489-17 v2.1.1 Health & Safety—EN60950-1: 2005; EN 50385: 2002 Radio—EN 300 328 v 1.7.1; EN 301.893 v 1.5.1 The conformity assessment procedure ref e rred to in Article 10.4 and Annex III of Directive 1999/5/EC has been followed. ...

  • Cisco Systems AIRCAP3602ITK9 - page 30

    30 This device also conforms to the EMC requirem ents of the Medical Devices Directi ve 93/42/EEC. Note This equipment is intended to be used in a ll EU and EF T A countries. Outdoor use may be restricted to certain frequencie s and/or may require a license fo r operation. For more details, contact Cisco Corporate Compliance. The product carries th ...

  • Cisco Systems AIRCAP3602ITK9 - page 31

    31 As such the systems are desi gned to be operated as to avoid contact with the antennas by the end user . It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of th e user o ...

  • Cisco Systems AIRCAP3602ITK9 - page 32

    32 This Device Meets the In dustry Canada Guidelines for Exposure to Radio Waves The 3600 series device includes a radio transmi tter an d receiver . It is designed not to exceed the limits for exposure to radio waves (radio frequency electrom agnetic fields) as referenced in Heal th Canada Safety Code 6. The guidelines include a substantial safe t ...

  • Cisco Systems AIRCAP3602ITK9 - page 33

    33 • United Kingdom, National Radiological Protection Board at this URL: www.nrpb.org.uk • Cellular T elecommunications Associ ation at this URL: www.wow-com.com • The Mobile Manufacturers Forum a t this URL: www.mmfai.org Administrative Rules for Cisco Ai ronet Access Points in Taiwan This section provides administrative rules for oper ating ...

  • Cisco Systems AIRCAP3602ITK9 - page 34

    English Translation Administrative Rules for Low- power Radio-Frequency Devices Article 12 For those low-power radio-frequenc y devices that have already recei ved a type-approva l, compan ies, business units or users should not change its freque ncies, increase its power or change its original features and functions. Article 14 The operation of th ...

  • Cisco Systems AIRCAP3602ITK9 - page 35

    35 English Translation Low-power Radio-frequency Devices T e chnical Specifications Operation of Cisco Aironet Access Points in Brazil This section contains special information for oper ation of Cisco Aironet access points in Brazil. Access Point Models: AIR-CAP3602E-T -K9 AIR-CAP3602I-T -K9 Regulatory Information Figure 6 contains Brazil regulator ...

  • Cisco Systems AIRCAP3602ITK9 - page 36

    36 Figur e 6 Brazil Regulat ory Infor mation Module Models: AIR-RM3000AC-T -K9 Portuguese Translation Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e nã o po de causar interferência a sistemas operando em caráter primário. English Tran ...

  • Cisco Systems AIRCAP3602ITK9 - page 37

    37 13 Configuring DHCP Option 43 and DHCP Option 60 This section contains a DHCP Option 43 configu ration example on a Windows 2003 Enterprise DHCP server for use with Cisco Aironet lightweig ht acce ss points. For other DHCP server implementations, consult product documentation for configuring DHCP Option 43. In Option 43, you should use the IP ad ...

  • Cisco Systems AIRCAP3602ITK9 - page 38

    38 <Default router> is the IP address of the default router, such as 10.0.0.1 <DNS Server> is the IP address of the DNS server, such as 10.0.10.2 Step 3 Add the option 60 line using the following syntax: option 60 ascii “ VCI string ” For the VCI string , “Cisco AP c3602”. The quotation marks must be included. Step 4 Add the opt ...

  • Cisco Systems AIRCAP3602ITK9 - page 39

    39 Compliance The 3602 series access point complies with UL 2043 for products installed in a b u ilding’ s en vironmental air handl ing spaces, such as abov e suspended ceilings. Safety UL 60950-1 CAN/CSA C22.2 No. 60950-1 IEC 60950-1 with all national deviations EN 60950-1 UL 2043 EMI and Susceptibility FCC Part 15.107 and 15.109 Cla ss B ICES-0 ...

  • Cisco Systems AIRCAP3602ITK9 - page 40

    40 15 Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitti ng a service request, and gathering additional information, see What’ s New in Cisco Product Documentation at: http://www .cisco.com/en/US/docs/general/whatsnew/whatsnew .html . Subscribe to What’ s New in Cisco Product Documentat ...

Manufacturer Cisco Systems Category Network Router

Documents that we receive from a manufacturer of a Cisco Systems AIRCAP3602ITK9 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- AIRCAP3602ITK9 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems AIRCAP3602ITK9
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems AIRCAP3602ITK9.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems AIRCAP3602ITK9, service manual, brief instructions and user manuals Cisco Systems AIRCAP3602ITK9. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems AIRCAP3602ITK9.

A complete manual for the device Cisco Systems AIRCAP3602ITK9, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems AIRCAP3602ITK9 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems AIRCAP3602ITK9.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems AIRCAP3602ITK9 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems AIRCAP3602ITK9, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems AIRCAP3602ITK9, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems AIRCAP3602ITK9 - which should help us in our first steps of using Cisco Systems AIRCAP3602ITK9
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems AIRCAP3602ITK9
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems AIRCAP3602ITK9 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems AIRCAP3602ITK9?

Use the form below

If you did not solve your problem by using a manual Cisco Systems AIRCAP3602ITK9, ask a question using the form below. If a user had a similar problem with Cisco Systems AIRCAP3602ITK9 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)