Manual Patton electronic 1030S

9 pages 0.09 mb
Download

Go to site of 9

Summary
  • Patton electronic 1030S - page 1

    USER MANUAL MODEL 1030 and 1030S Synchronous, Carrier Controlled Short Range Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part #07M1030-C Doc. #041013UC Revised 4/20/98 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 1030S - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1030 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 1030S - page 3

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics T echnical Support at (301 ...

  • Patton electronic 1030S - page 4

    3.2 SWITCH SETTINGS All possible settings for the Model 1030’s configuration switches are presented in the summary table and descriptions below . If you have additional questions regarding configuration, contact Patton T echnical Support at (301) 975-1007. Switch 1: Not used Switch 2: Carrier Enable Switch 2 is used to specify how the carrier sig ...

  • Patton electronic 1030S - page 5

    When connecting two Model 1030s, it is necessary to use a “crossover” cable. The diagram below shows how a crossover cable should be constructed for an environment where both Model 1030s use a 6-wire RJ-1 1 connector . Similar logic should be followed when using RJ-45 connectors or a combination of the two. SIGNAL PIN# COLOR COLOR PIN# SIGNAL G ...

  • Patton electronic 1030S - page 6

    1. Open the unit by gently inserting a screwdriver between the DB-25 connector and the lip of the plastic case (see below). Y ou don’t have to worry about breaking the plastic, but be careful not to bend the D-sub connector . Once the unit has been opened, you will be able to see the terminal blocks located at the rear of the PC board. 2. Strip t ...

  • Patton electronic 1030S - page 7

    8. Place the 2 halves of the strain relief assembly on either side of the telephone wire and press together very lightly . Slide the assembly so that it is about 2 inches from the terminal posts and press together firmly . If your cable diameter is too small or too large for our strain relief, please contact our technical support. We have strain re ...

  • Patton electronic 1030S - page 8

    4.2.2 CONNECTION TO A “DCE” DEVICE Since the Model 1030 is wired as a DCE, you cannot connect it directly to another DCE such as a modem, multiplexer or printer . If you need to connect the Model 1030 to another DCE device, you must use a null modem cable wired according to diagram below . We recommend that you use the shortest possible cable, ...

  • Patton electronic 1030S - page 9

    APPENDIX B P A TTON MODEL 1030/1030S RS-232 PIN CONFIGURA TIONS Copyright © 1998 Patton Electronics Company All Rights Reserved 1- (FG) Frame Ground 2- (TD) T ransmit Data T o Model 1030 3- (RD) Receive Data From Model 1030 4- (RTS) Request to Send T o Model 1030 5- (CTS) Clear to Send From Model 1030 6- (DSR) Data Set Ready From Model 1030 7- (SG ...

Manufacturer Patton electronic Category Model Vehicle

Documents that we receive from a manufacturer of a Patton electronic 1030S can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 1030S manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 1030S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 1030S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 1030S, service manual, brief instructions and user manuals Patton electronic 1030S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 1030S.

A complete manual for the device Patton electronic 1030S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 1030S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 1030S.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 1030S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 1030S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 1030S, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 1030S - which should help us in our first steps of using Patton electronic 1030S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 1030S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 1030S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 1030S?

Use the form below

If you did not solve your problem by using a manual Patton electronic 1030S, ask a question using the form below. If a user had a similar problem with Patton electronic 1030S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)