English dropdown-ico

Manual Rangemaster ELTSHDC110SG

16 pages 0.33 mb
Download

Go to site of 16

Summary
  • Rangemaster ELTSHDC110SG - page 1

    EL TSHDC1 10SG/ Users Guide & Installation Instructions ...

  • Rangemaster ELTSHDC110SG - page 2

    CONTENTS IMPORT ANT SAFETY INFORMA TION Installation Page 2 Child Safety 2 Maintenance and service 3 YOUR APPLIANCE OPERA TING INSTRUCTIONS Cooker Hood Controls 4 T o Operate 5 Recirculation 5 Extraction 5 MAINTENANCE AND CLEANING Metal Grease Filters 6 Charcoal Filter 6 Lighting 7 Cleaning 7 INST ALLA TION INSTRUCTIONS T echnical Information 8 ELE ...

  • Rangemaster ELTSHDC110SG - page 3

    These warnings are provided in the interest s of safety . Ensure that you understand them all before inst alling or using this appliance. Y our safety is of paramount import ance. If you are unsure about the meaning of any of these warnings contact the Helpline. • INST ALLA TION • Any installation work must be undertaken by a qualified electric ...

  • Rangemaster ELTSHDC110SG - page 4

    IMPORT ANT SAFETY INFORMA TION • MAINTENANCE AND SERVICE • This appliance can be a hazard if the grease filters and charcoal filters are not cleaned and replaced as recommended. • Always insist on genuine RANGEmaster spare p arts. • The halogen light and cover lamp might hot. • Under no circumstances should you attempt to repair the appli ...

  • Rangemaster ELTSHDC110SG - page 5

    OPERA TING INSTRUCTIONS The chimney hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. The appliance can be installed to recirculate or extract contaminated air . COOKER HOOD CONTROLS The chimney hood functions are controlled by four push buttons located centrally on the front of the canopy . BUTTON L - T urn ...

  • Rangemaster ELTSHDC110SG - page 6

    TO OPERA TE Select the required fan speed and light if required. T o obtain the best performance when cooking it is advisable to switch the chimney hood on for a few minutes before you start cooking and leave it running for about 15 minutes after finishing. RECIRCULA TION In the recirculation mode contaminated air enters the chimney hood through th ...

  • Rangemaster ELTSHDC110SG - page 7

    Regular maintenance and cleaning will ensure good performance and reliability , while extending the working life of the hood. Special attention should be paid to the grease filter cassettes and the charcoal filter when the hood is used in the recirculation mode. Before carrying out any mainte- nance or cleaning isolate the cooker hood from the main ...

  • Rangemaster ELTSHDC110SG - page 8

    LIGHTING The canopy is fitted with three 20W halogen spotlamps. W ARNING! The halogen light and cover lamp might hot. If one of the spotlamps fails to function check that the two pins are correctly inserted into the lamp holder . T o replace a spotlamp remove the two screws, which secure the lens retaining ring and glass lens as illustrated. T ake ...

  • Rangemaster ELTSHDC110SG - page 9

    It is dangerous to alter the specifications or attempt to modify this chimney hood in any way . TECHNICAL INFORMA TION DIMENSIONS CANOPY : Height 70mm Width 1098mm Depth 500mm CHIMNEY : Height - Upper Chimney 215mm Lower Chimney 740mm Width 300mm Depth 260mm ELECTRICAL SUPPL Y VOL T AGE: ~50Hz 230V POWER CONSUMPTION: 265W F AN : 205W SPOTLAMPS: 3x2 ...

  • Rangemaster ELTSHDC110SG - page 10

    ELECTRICAL REQUIREMENTS Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualified electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Install ...

  • Rangemaster ELTSHDC110SG - page 11

    COMPONENTS The chimney hood comprises of the following: - No 1 150x120mm ducting spigot (A) No 1 125x120mm ducting spigot (D) No 1 S plashback (B) optional No 1 Canopy (C) No 2 Recirculation grilles (G) No 1 Lower chimney stack (I) No 1 Recirculation ducting (P) No 2 Recirculation extension ducts (P1) No 1 Recirculation spigot (R) No 1 Upper chimne ...

  • Rangemaster ELTSHDC110SG - page 12

    INST ALLING THE CHIMNEY HOOD CLEARANCE HEIGHTS The chimney hood is designed to be fitted over a cooking appliance. A minimum clearance height of 650mm (251/2ins) is required when installed above a built-in electric hob, or 685mm (27ins) when installed above a built- in gas hob. If fitting a Rangemaster splashback, fit the splash back after the cook ...

  • Rangemaster ELTSHDC110SG - page 13

    INST ALLING THE CHIMNEY HOOD 4. Drill the holes for the fixing screws using an 8mm masonry drill bit. Insert the rawl plugs and fix the brackets (2) using the 4.2 x 44.4mm screws provided. DRILLING THE HOLES 1 1 . Draw a horizont al line through the vertical 970mm up the wall from the top of the cooking appliance, ensuring it is level with a spirit ...

  • Rangemaster ELTSHDC110SG - page 14

    INST ALLING THE CHIMNEY HOOD DUCTING The hood is more effective when used in the extraction mode (ducted to the outside). When used in the extraction mode ensure the ducting spigot has been correctly fitted as illustrated. The ducting used must be ∅ ∅ ∅ ∅ ∅ 125 (5ins) or ∅ ∅ ∅ ∅ ∅ 150mm (6ins), flexible or rigid and must be manu ...

  • Rangemaster ELTSHDC110SG - page 15

    INST ALLING THE CHIMNEY HOOD by pressing it downwards until the two pieces meet. 3. Connect the two recirculation extension ducting pipes P1 on to the outlets on either side of the spigot R , which push fit into position, by pressing them horzontally until the two pieces meet. 4. Do not fit the recirculation grilles until after the chimney has been ...

  • Rangemaster ELTSHDC110SG - page 16

    436001896_04 - 060210 73/23/CEE Dir. 89/336/CEE 93/68/CEE The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly , yo ...

Manufacturer Rangemaster Category Ventilation Hood

Documents that we receive from a manufacturer of a Rangemaster ELTSHDC110SG can be divided into several groups. They are, among others:
- Rangemaster technical drawings
- ELTSHDC110SG manuals
- Rangemaster product data sheets
- information booklets
- or energy labels Rangemaster ELTSHDC110SG
All of them are important, but the most important information from the point of view of use of the device are in the user manual Rangemaster ELTSHDC110SG.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Rangemaster ELTSHDC110SG, service manual, brief instructions and user manuals Rangemaster ELTSHDC110SG. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Rangemaster ELTSHDC110SG.

Similar manuals

A complete manual for the device Rangemaster ELTSHDC110SG, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Rangemaster ELTSHDC110SG by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Rangemaster ELTSHDC110SG.

A complete Rangemaster manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Rangemaster ELTSHDC110SG - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Rangemaster ELTSHDC110SG, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Rangemaster ELTSHDC110SG, that we can find in the current document
3. Tips how to use the basic functions of the device Rangemaster ELTSHDC110SG - which should help us in our first steps of using Rangemaster ELTSHDC110SG
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Rangemaster ELTSHDC110SG
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Rangemaster ELTSHDC110SG in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Rangemaster ELTSHDC110SG?

Use the form below

If you did not solve your problem by using a manual Rangemaster ELTSHDC110SG, ask a question using the form below. If a user had a similar problem with Rangemaster ELTSHDC110SG it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)