English dropdown-ico

Manual Canon 200

198 pages 3.57 mb
Download

Go to site of 198

Summary
  • Canon 200 - page 1

    User’ s Guide BUBBLE JET PRINTER V1 S200.book Page 1 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 2

    2 T able of Contents Introduction ..................................................................................................... 5 How to Use This Manual ................................................................................. 6 Saf ety Precautions ..................................................................................... ...

  • Canon 200 - page 3

    3 T able of Contents Using the Printer with a Network ................................................................. 65 Uninstalling Printer Drivers .......................................................................... 69 Routine Maintenance .................................................................................... 70 When to Repl ...

  • Canon 200 - page 4

    4 T able of Contents T roub leshooting .......................................................................................... 129 Cannot Install the Printer Driver ................................................................ 130 Print Quality is Poor or Contains Errors ..................................................... 132 Printer Does N ...

  • Canon 200 - page 5

    5 Introduction Intr oduction Thank you f or purchasing the Canon S200 Bub ble Jet Printer . This User’ s Guide provides complete e xplanations of the f eatures and functions of the pr inter . This guide uses the f ollowing symbols to indicate impor tant inf or mation. Alwa ys obser ve these instructions. Warning ➤ Instructions that, if ignored, ...

  • Canon 200 - page 6

    6 How to Use This Man ual Ho w to Use This Manual T o view this User ’ s Guide , we recommend that y ou use Acrobat Reader 4.0 or Acrobat Reader 3.0. Please note that screens display ed by Acrobat Reader 3.0 are slightly diff erent. Use this button to enlarge the viewing screen. Select this button in the tool bar and click within the screen. Disp ...

  • Canon 200 - page 7

    7 How to Use This Man ual Displa ys the table of contents . Click the heading to jump to the topic. Click the “” symbol to see the headings f or each chapter . Click the “” symbol to close the headings. Use this button to search f or a word. S200.book Page 7 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 8

    8 Saf ety Precautions Safety Precautions Please read the saf ety warnings and cautions provided in this manual to ensure that y ou use the printer safely . Do not attempt to use the printer in any wa y not described in this manual. Warning ➤ You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. ...

  • Canon 200 - page 9

    9 Saf ety Precautions Ne ver plug the printer into a pow er sock et that is shared with other equipment (e xtension lead, double adapter , etc.). Ne ver use the printer if the pow er cord is bundled or knotted. If you detect smok e, un usual smells or strange noises around the printer , immediately unplug the printer at the power supply and call f ...

  • Canon 200 - page 10

    10 Saf ety Precautions ■ Maintaining the printer Do not attempt to disassemble or modify the printer . There are no user ser viceable par ts inside the printer . The printer contains high-voltage components . Ne ver attempt an y maintenance procedure not descr ibed in this guide. ■ W orking around the pr inter Do not use in fl ammable spr a ys ...

  • Canon 200 - page 11

    11 Saf ety Precautions ■ Choosing a location Do not install the printer in a location that is unstable or subject to e xcessiv e vibration. Do not install the printer in locations that are very humid or dusty , in direct sunlight, outdoors, or close to a heating source . T o av oid the risk of fi re or electr ic shoc ks, install the printer in a ...

  • Canon 200 - page 12

    12 Saf ety Precautions ■ P ower supply Ne ver remo v e the plug by pulling on the cord. Do not use an e xtension lead. If you do not intend to use the printer f or a long period of time, unplug the printer . Ne ver use a po wer supply v oltage other than that supplied in the countr y of purchase. The correct pow er supply voltage and frequency is ...

  • Canon 200 - page 13

    13 Saf ety Precautions ■ W orking around the pr inter Ne ver put y our hands or fi ngers in the printer while it is pr inting. Do not place metal objects (paper clips, staples , etc.) or containers of fl ammable solv ents (alcohol, thinners. etc.) on top of the pr inter . If any f oreign object (metal or liquid) f alls into the printer , unplug ...

  • Canon 200 - page 14

    14 Saf ety Precautions Ne ver touch the electrical contacts on a print head after pr inting. The metal par ts ma y be very hot and could cause bur ns . S200.book Page 14 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 15

    15 Printer P ar ts and Their Functions Printer P ar ts and Their Functions • F ront Vie w • Rear Vie w • Inside the Printer • Con fi guration of the BJ Car tr idge S200.book Page 15 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 16

    F ront View 16 Printer P ar ts and Their Functions Fr ont View RESUME/CANCEL Button Press to resume printing once an error has been resolv ed. The pr inter will then initialise ready f or printing. Also , to cancel printing in progress, press this button. This printer does not hav e a P ower s witch. W ar ming up star ts as soon as it is plugged in ...

  • Canon 200 - page 17

    Rear View 17 Printer P ar ts and Their Functions Rear Vie w USB P ort Connects the printer to a computer through a USB interf ace. P ower cab le connector Connect the supplied cable into this connector . Handle Hold this handle with your fi ngers of both hands to mov e the printer in a shor t distance. Be sure to hold this handle with your fi nge ...

  • Canon 200 - page 18

    Inside the Printer 18 Printer P ar ts and Their Functions Inside the Printer P aper Thickness Le ver Adjusts the gap between the print head and the surf ace of the printing paper . Cartridg e Lock Le ver Locks the BJ Cartr idge into the holder . Once the BJ Car tr idge is installed, do not touch this le ver . Cartridg e Holder Install the BJ Car tr ...

  • Canon 200 - page 19

    Con fi guration of the BJ Car tridge 19 Printer P ar ts and Their Functions Configuration of the BJ Car tridge The BJ Car tr idge consists of a print head and two ink tanks (e xpendable supplies) as shown belo w . When the printer runs out of ink, replace only the empty ink tank with a new one. BCI-24 Colour BCI-24 Black Print Head BJ Car tr idge ...

  • Canon 200 - page 20

    20 Printer Dr iv er Functions (Windows) Printer Driver Functions (Windo ws) • Opening the Printer Proper ties Dialog Bo x • Printer Proper ties Dialog Bo x Descr iption • BJ Status Monitor Functions • Cancelling a Print Job • Uninstalling Printer Dr iv ers S200.book Page 20 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 21

    Opening the Printer Proper ties Dialog Box 21 Printer Dr iv er Functions (Windows) Opening the Printer Pr oper ties Dialog Bo x The Printer Proper ties dialog bo x can be opened from either within an application, or directly from the Windows Start menu. ■ Opening the Printer Proper ties dialog bo x from your application prog ram This method is ge ...

  • Canon 200 - page 22

    Opening the Printer Proper ties Dialog Box 22 Printer Dr iv er Functions (Windows) ■ Opening the Printer Proper ties dialog bo x directly from the Star t menu This method is used f or maintenance operations such as print head cleaning, or to specify printer settings common to all application programs. When the Printer Proper ties dialog bo x is o ...

  • Canon 200 - page 23

    Printer Proper ties Dialog Box Description 23 Printer Dr iv er Functions (Windows) Printer Pr oper ties Dialog Bo x Description Note ➤ The screens in this section refer to Windows Me/Windows 98 operation. The equivalent screens for Windows XP/Windows 2000 may look slightly different. • Eff ects T ab • Maintenance T ab • Main T ab • P age ...

  • Canon 200 - page 24

    Printer Proper ties Dialog Box Description 24 Printer Dr iv er Functions (Windows) Main T ab (1) Media T ype Ensure this setting matches the type of media loaded in the printer . (2) Print Quality Select the print quality you require from among the diff erent options. T o select custom Print quality , select Custom and click the Set... button. (6) ...

  • Canon 200 - page 25

    Printer Proper ties Dialog Box Description 25 Printer Dr iv er Functions (Windows) (3) Colour Adjustment/Color Adjustment Select the method of colour adjustment. T o mak e detailed colour adjustments, select Manual , then clic k the Set... button. (4) Greyscale Printing/Gra yscale Printing Select to print a greyscale v ersion of a colour document. ...

  • Canon 200 - page 26

    Printer Proper ties Dialog Box Description 26 Printer Dr iv er Functions (Windows) P a g e Setup T ab (1) P age Size Ensure the correct paper size is selected. (7) (2) (1) (3) (5) (6) (4) S200.book Page 26 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 27

    Printer Proper ties Dialog Box Description 27 Printer Dr iv er Functions (Windows) (2) Orientation Select landscape or por trait printing and ensure it is the same or ientation used in the application. (3) Printing T ype Select the printing method from among the follo wing. Normal-size Printing The document is printed according to the or iginal dim ...

  • Canon 200 - page 28

    Printer Proper ties Dialog Box Description 28 Printer Dr iv er Functions (Windows) (6) Collate Select to print multiple copies of the document one cop y at a time. (7) Pre view Area V er ify the ov erall la y out, stamps, bac kground, etc., to be applied to the print job . Note ➤ When you are to print a Web page, the entire page may not be printe ...

  • Canon 200 - page 29

    Printer Proper ties Dialog Box Description 29 Printer Dr iv er Functions (Windows) Stamp/Bac kgr ound T ab (1) Stamp Select the check bo x and choose the stamp . (2) Define Stamp... This allows y ou to create new stamps , or modify details of a selected stamp . (1) (3) (4) (2) (5) (7) (6) (8) S200.book Page 29 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 30

    Printer Proper ties Dialog Box Description 30 Printer Dr iv er Functions (Windows) (3) Place stamp over te xt When Stamp is selected, y ou can select this check bo x. When selected, the stamp is printed ov er the pr int data. (4) Stamp first pa ge only When Stamp is selected, y ou can select this check bo x. When selected, the stamp is printed onl ...

  • Canon 200 - page 31

    Printer Proper ties Dialog Box Description 31 Printer Dr iv er Functions (Windows) Effects T ab (1) Simulate Illustration This function manipulates colour image data with cer tain effects . Select the check bo x and adjust the brightness of the image with the Contrast slide bar . (6) (1) (2) (4) (3) (5) S200.book Page 31 Saturday, September 22, 200 ...

  • Canon 200 - page 32

    Printer Proper ties Dialog Box Description 32 Printer Dr iv er Functions (Windows) (2) Monochr ome Effects Prints a colour image in a single colour . Select the check bo x and choose a colour or use a custom colour using Select Colour / Select Color . (3) Vivid Photo Prints a photo or image data in vivid colours. By enlarging the blue and g reen co ...

  • Canon 200 - page 33

    Printer Proper ties Dialog Box Description 33 Printer Dr iv er Functions (Windows) Pr ofiles T ab (1) Printing Profiles This list displa ys the printing settings currently registered in the Pro fi les tab. The Current Settings pro fi le contains the settings currently speci fi ed in the Main , P age Setup , Stamp/Backgr ound and Effects tabs . ...

  • Canon 200 - page 34

    Printer Proper ties Dialog Box Description 34 Printer Dr iv er Functions (Windows) (2) Details Displa ys all the printer settings selected in Printing Profiles . (3) Description Displa ys a description of the pr inter settings selected in Printing Pr ofiles . Y ou can enter the description when saving the printer settings. (4) Add to Pr ofiles.. ...

  • Canon 200 - page 35

    Printer Proper ties Dialog Box Description 35 Printer Dr iv er Functions (Windows) Maintenance T ab (1) Cleaning Click to start pr int head cleaning. (2) Deep Cleaning Click to start pr int head deep cleaning. Use this function only if Cleaning has not improv ed the print quality . (1) (2) (5) (7) (8) (3) (4) (6) S200.book Page 35 Saturday, Septemb ...

  • Canon 200 - page 36

    Printer Proper ties Dialog Box Description 36 Printer Dr iv er Functions (Windows) (3) Print Head Alignment Aligns the print head. F or details on print head alignment, refer to “ Print Head Alignment ” . (4) Nozzle Check Prints the nozzle check pattern to ensure the pr int head nozzles are outputting ink nor mally . For details , ref er to “ ...

  • Canon 200 - page 37

    BJ Status Monitor Functions 37 Printer Dr iv er Functions (Windows) BJ Status Monitor Functions The BJ Status Monitor allows y ou to check the status of the printer . If an error occurs, the status monitor indicates the nature of the error and suggests an appropriate solution. When the lo w ink warning is set to be enabled, the status monitor also ...

  • Canon 200 - page 38

    BJ Status Monitor Functions 38 Printer Dr iv er Functions (Windows) Note ➤ To open the BJ Status Monitor when the printer is not printing, click the Maintenance tab in the Printer Properties dialog box and click the Start Status Monitor button. S200.book Page 38 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 39

    BJ Status Monitor Functions 39 Printer Dr iv er Functions (Windows) ■ When errors occur The BJ Status Monitor is automatically displa yed when an error occurs , e.g. if the printer runs out of paper or paper jams. In such cases, tak e the appropriate action as descr ibed in the Printer Status tab . In Windows Me , Windows 98, clic k the Guide tab ...

  • Canon 200 - page 40

    Cancelling a Print Job 40 Printer Dr iv er Functions (Windows) Cancelling a Print Job Y ou can cancel a print job that is currently performed by: • Pressing the RESUME/CANCEL b utton, or • Operating the BJ Status Monitor . ■ Cancelling a print job with the RESUME/CANCEL button of the printer itself Press the RESUME/CANCEL b utton to ter minat ...

  • Canon 200 - page 41

    Cancelling a Print Job 41 Printer Dr iv er Functions (Windows) ■ Cancelling a print job from the BJ Status Monitor 1 Click the Canon BJ Status Monitor (Windows Me/Windows 98) or Canon S200 - USB001 (Windows XP/Windo ws 2000) icon on the T ask Bar . 2 Click Cancel Printing . S200.book Page 41 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 42

    Uninstalling Printer Dr iv ers 42 Printer Dr iv er Functions (Windows) Uninstalling Printer Driver s Use the Uninstaller to delete any unw anted printer dr ivers . This allows y ou to delete all the fi les associated with the printer dr iv er at the same time. 1 Click the Star t button and select Pr ograms , Canon S200 , Uninstall . In Windows XP ...

  • Canon 200 - page 43

    43 Printer Dr iv er Functions (Macintosh) Printer Driver Functions (Macintosh) • Description of Pr int Settings • BJ Print Monitor • Cancelling a Print Job • Using the Printer with a Networ k • Uninstalling Printer Dr iv ers S200.book Page 43 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 44

    Description of Pr int Settings 44 Printer Dr iv er Functions (Macintosh) Description of Print Settings • P age Setup Dialog Bo x • Printer Utility Dialog Bo x • Print Dialog Box • Detailed Setting Dialog Bo x • Options Dialog Bo x • Register Settings Dialog Bo x S200.book Page 44 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 45

    Description of Pr int Settings 45 Printer Dr iv er Functions (Macintosh) P a g e Setup Dialog Bo x The P age Setup dialog bo x contains settings f or the printed page, such as the size of the print media, and resizing the pr inted image. T o open the P age Setup dialog bo x, select P age Setup from the File menu in y our application program. (1) P ...

  • Canon 200 - page 46

    Description of Pr int Settings 46 Printer Dr iv er Functions (Macintosh) (3) Scale Specify the scaling percentage to resize the document f or printing. (4) Orientation Select landscape or por trait printing. (5) Custom T o specify a custom paper size, clic k this button to open the Custom dialog box after selecting Custom 1 to Custom 3 in the P ape ...

  • Canon 200 - page 47

    Description of Pr int Settings 47 Printer Dr iv er Functions (Macintosh) Printer Utility Dialog Bo x The Printer Utility dialog bo x is displa yed when y ou click the Utilities button in the Pag e Setup dialog bo x. (1) Select the function you wish to perf orm. (2) Displa y area showing the v arious maintenance functions, including cleaning and tes ...

  • Canon 200 - page 48

    Description of Pr int Settings 48 Printer Dr iv er Functions (Macintosh) ➡ Print Head Cleaning ➡ Print Head Deep Cleaning ➡ Enabling Lo w Ink W arning ➡ Print Head Alignment ➡ Setting Ink Dr ying W ait Time S200.book Page 48 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 49

    Description of Pr int Settings 49 Printer Dr iv er Functions (Macintosh) Print Dialog Bo x The Print dialog bo x speci fi es the media type and print settings to be used for y our print job . T o open the Print dialog box, select Print from the File menu in your application program. (1) Media T ype Ensure this setting matches the type of paper med ...

  • Canon 200 - page 50

    Description of Pr int Settings 50 Printer Dr iv er Functions (Macintosh) (4) Details... Allows y ou to manually set the print quality and colour settings in the Detailed Setting Dialog Bo x . (5) Options... Specify the output destination, print order and page lay out f or the document you are printing. (6) Apply ... Allows y ou to register print se ...

  • Canon 200 - page 51

    Description of Pr int Settings 51 Printer Dr iv er Functions (Macintosh) Detailed Setting Dialog Bo x T o open the Detailed Setting dialog box, select Man ual in the Print dialog bo x and then click Details... . ■ Quality panel (1) P anel displa y icons Click these icons to s witch betw een panels in the Detailed Setting dialog bo x. (1) (2) (3) ...

  • Canon 200 - page 52

    Description of Pr int Settings 52 Printer Dr iv er Functions (Macintosh) (2) Print Quality Mov e the slide bar to adjust the balance between print quality and speed. Moving the bar to the right enhances pr int quality , and moving it to the left increases printing speed. (3) Halftoning Select either Dither or Diffusion ink dot con fi gurations . S ...

  • Canon 200 - page 53

    Description of Pr int Settings 53 Printer Dr iv er Functions (Macintosh) ■ Special Effects P anel T o display the Special Eff ects panel, click the Special effects display icon. (1) Simulate illustration This function manipulates colour image with cer tain effects . Select the check bo x and adjust the brightness of the image with the Contrast sl ...

  • Canon 200 - page 54

    Description of Pr int Settings 54 Printer Dr iv er Functions (Macintosh) (2) Monochr ome effects Prints a colour image in a single colour . Select the check bo x and choose a colour or use a custom colour using Select Colour / Select Color . (3) Vivid Photo Prints a photo or image data in vivid colour . Note that this eff ect is disabled when y ou ...

  • Canon 200 - page 55

    Description of Pr int Settings 55 Printer Dr iv er Functions (Macintosh) ■ Colour/Color P anel T o display the Colour / Color panel, clic k the Colour / Color displa y icon. (1) Colour Correction / Color Correction Select a colour correction method: BJ Standar d , ColorSync or None . BJ Standard is usually the optimum colour correction method f o ...

  • Canon 200 - page 56

    Description of Pr int Settings 56 Printer Dr iv er Functions (Macintosh) (2) Print T ype F or printing that emphasises inter mediate colours, select Photo . F or pr inting that emphasises the brightness of pr imar y colours, select Graphics . For documents that contain large amounts of a basic colour , select Spot Colour / Spot Color . (3) Printer ...

  • Canon 200 - page 57

    Description of Pr int Settings 57 Printer Dr iv er Functions (Macintosh) Options Dialog Bo x T o open the Options dialog box, clic k the Options... button in the Print dialog bo x. (1) P age Lay out Use this function to print more than one page on a single sheet of paper . T ypically , this setting is set to displa y 1 P age/Sheet Printing . If ano ...

  • Canon 200 - page 58

    Description of Pr int Settings 58 Printer Dr iv er Functions (Macintosh) 2 P age/Sheet Printing / 4 P age/Sheet Printing P ages are reduced and printed so that two or f our pages fi t on each printed page. Y ou can also select page order and whether to place a border around each page. P oster (Divided into 4) / (Divided into 9) / (Divided into 16) ...

  • Canon 200 - page 59

    Description of Pr int Settings 59 Printer Dr iv er Functions (Macintosh) (5) Print in rever se order Prints the document star ting with the last page. (6) Print collated pages Prints multiple copies of the document one cop y at a time. (7) Pre view Area S200.book Page 59 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 60

    Description of Pr int Settings 60 Printer Dr iv er Functions (Macintosh) Register Settings Dialog Bo x T o open the Register Settings dialog box, clic k the Apply ... button in the Print dialog bo x. (1) Settings Displa ys a list of the registered print settings. (2) Import Impor ts a set of pr int settings. T o use the settings , select the desire ...

  • Canon 200 - page 61

    BJ Print Monitor 61 Printer Dr iv er Functions (Macintosh) BJ Print Monitor The BJ Print Monitor allows you to chec k the progress of print jobs. Y ou can launch the BJ Print Monitor if background printing is enabled in the Chooser utility . ■ Opening the BJ Print Monitor 1 Select Chooser from the Apple Menu. 2 Set Backgr ounding to On . 3 After ...

  • Canon 200 - page 62

    BJ Print Monitor 62 Printer Dr iv er Functions (Macintosh) ■ BJ Print Monitor Functions The BJ Print Monitor allows you to change the print order of documents queued f or printing. T o change the pr int order , place the mouse pointer o ver the name of the document, hold the mouse button do wn while dragging the document name to the ne w position ...

  • Canon 200 - page 63

    Cancelling a Print Job 63 Printer Dr iv er Functions (Macintosh) Cancelling a Print Job ■ Cancelling a print job with the RESUME/CANCEL button of the printer itself Press the RESUME/CANCEL b utton to ter minate the pr int job . RESUME/CANCEL button S200.book Page 63 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 64

    Cancelling a Print Job 64 Printer Dr iv er Functions (Macintosh) ■ Cancelling a print job from the BJ status monitor When the BJ Print Monitor is r unning, you can use it to cancel or suspend the current print job . 1 Select BJ Print Monitor in the Application Menu. 2 Click the name of the print job y ou wish to cancel, then click . The document ...

  • Canon 200 - page 65

    Using the Printer with a Network 65 Printer Dr iv er Functions (Macintosh) Using the Printer with a Netw ork The printer can be used with an Ether net network environment. Follo w the steps described below to connect the printer to the network. ■ Bef ore Setting up the Printer Install the printer dr iv er on each network computer that will use th ...

  • Canon 200 - page 66

    Using the Printer with a Network 66 Printer Dr iv er Functions (Macintosh) 4 Click Share . 5 Con fi r m that S200 server is selected in Enter new print server name: then click Send . 6 Con fi r m that the ne w pr int ser v er name has been added to Current print servers then clic k Close . 7 Click the close bo x to close the Chooser . • Client ...

  • Canon 200 - page 67

    Using the Printer with a Network 67 Printer Dr iv er Functions (Macintosh) ■ Chec king Pr int Status • Checking print status from the print ser ver T o check the status of a print job from the pr int ser v er , star t the BJ Print Monitor . Select BJ Print Monitor in the Application Menu. T o close the BJ Pr int Monitor , select Close Status Wi ...

  • Canon 200 - page 68

    Using the Printer with a Network 68 Printer Dr iv er Functions (Macintosh) ■ BJ Status Monitor Functions .... Click to pause printing of the speci fi ed document. .... Click to resume printing. .... Click to cancel printing of the speci fi ed document. Note ➤ • Y ou can deter mine the owner of a computer b y selecting the File Sharing contr ...

  • Canon 200 - page 69

    Uninstalling Printer Dr iv ers 69 Printer Dr iv er Functions (Macintosh) Uninstalling Printer Driver s When a printer dr iv er is no longer needed, use the Installer to delete, all the progr am fi les associated with it at the same time. Bef ore proceeding, ensure you sa v e any unsa ved fi les in an y currently running applications. 1 Load the S ...

  • Canon 200 - page 70

    70 Routine Maintenance Routine Maintenance • When to Replace Ink T ank and Maintain Pr int Head • Replacing an Ink T ank • Printing the Nozzle Check P attern • Print Head Cleaning • Print Head Deep Cleaning • Print Head Alignment • Enab ling Low Ink W ar ning • Setting Ink Dr ying W ait Time • T ranspor ting the Pr inter S200.book ...

  • Canon 200 - page 71

    When to Replace Ink T ank and Maintain Print Head 71 Routine Maintenance When to Replace Ink T ank and Maintain Print Head When printing becomes faint or colours are incorrect, see if the print head nozzles are clogged and clean them fi rst. Follo w the procedures below and replace an ink tank if necessar y . ➡ Printing the Nozzle Check P attern ...

  • Canon 200 - page 72

    Replacing an Ink T ank 72 Routine Maintenance Replacing an Ink T ank When replacing an ink tank, check the model n umber very carefully . The pr inter will not print properly if the wrong ink tank is used, or installed in the incorrect position. • Black: BCI-24 Black • Colour : BCI-24 Color Note ➤ Damage caused by using a refilled cartridge i ...

  • Canon 200 - page 73

    Replacing an Ink T ank 73 Routine Maintenance 2 Remov e the empty ink tank. Pull the tab on the ink tank tow ards you to release . Then lift it from its slot. Do not touch the lock le v er ; remove only the ink tank. Impor tant ➤ • Handle ink tanks carefully to av oid staining clothing or the surrounding area. • Discard empty ink tanks accord ...

  • Canon 200 - page 74

    Replacing an Ink T ank 74 Routine Maintenance 3 Unpack a ne w ink tank and remov e the orange protectiv e cap . Impor tant ➤ • Do not re-attach the protectiv e cap once you ha ve remo v ed it. • Once you ha v e remov ed the protectiv e cap , do not touch the open ink por t. protectiv e cap S200.book Page 74 Saturday, September 22, 2001 2:34 P ...

  • Canon 200 - page 75

    Replacing an Ink T ank 75 Routine Maintenance 4 Inser t the ink tank into a slot. S200.book Page 75 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 76

    Replacing an Ink T ank 76 Routine Maintenance 5 Press on the tab until the ink tank snaps fi r mly into place. 6 Close the front cov er . The car tr idge holder mov es to the right. The ink tank installation process is now complete . Note ➤ • T o maintain optimal pr int quality , use an ink tank within six months of fi rst use. • Once an in ...

  • Canon 200 - page 77

    Printing the Nozzle Check P attern 77 Routine Maintenance Printing the Nozzle Chec k P attern Print the nozzle check pattern to deter mine whether the ink ejects nor mally from the pr int head nozzles, and to v erify pr int head alignment. Use this function when pr inted results are blurred or the colour is incorrect. Nozzle check pattern printing ...

  • Canon 200 - page 78

    Printing the Nozzle Check P attern 78 Routine Maintenance Macintosh 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Open the P age Setup dialog bo x. The P age Setup dialog bo x can be nor mally opened b y selecting Pa g e Setup... in the File menu. 3 Click the Utilities button to open the Printer Utilities dialog bo x ...

  • Canon 200 - page 79

    Printing the Nozzle Check P attern 79 Routine Maintenance ■ Printing the Nozzle Check P attern through the Pr inter 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Press the RESUME/CANCEL button twice quic kly . ➡ Examining the Nozzle Check P atter n S200.book Page 79 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 80

    Printing the Nozzle Check P attern 80 Routine Maintenance ■ Examining the Nozzle Chec k P atter n The nozzle check pattern should appear as f ollows when ink is discharged properly . Examine the nozzle check pattern output by the printer . Une venness in these patterns indicates the print head requires alignment. Lines missing here indicate the p ...

  • Canon 200 - page 81

    Print Head Cleaning 81 Routine Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Note ➤ Cleaning the head consumes ink, so perform head cleaning only when necessary. Windows 1 Ensure that the printer is on. 2 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog B ...

  • Canon 200 - page 82

    Print Head Cleaning 82 Routine Maintenance Macintosh 1 Ensure the printer is on. 2 Open the P age Setup dialog bo x. The P age Setup dialog bo x can nor mally be opened b y selecting Pa g e Setup... in the File menu. 3 Click the Utilities button to open the Printer Utility dialog bo x. 4 Select Cleaning from the pull-down men u, and then click the ...

  • Canon 200 - page 83

    Print Head Deep Cleaning 83 Routine Maintenance Print Head Deep Cleaning If print quality does not improv e by standard print head cleaning, tr y deep cleaning, which is a more pow erful process. P erf or m print head deep cleaning from the pr inter driver . Note ➤ Print head deep cleaning consumes more ink than standard print head cleaning, so p ...

  • Canon 200 - page 84

    Print Head Deep Cleaning 84 Routine Maintenance Macintosh 1 Ensure the printer is on. 2 Open the P age Setup dialog bo x. The P age Setup dialog bo x can nor mally be opened b y selecting Pa g e Setup... in the File menu. 3 Click the Utilities button to open the Printer Utility dialog bo x. 4 Select Cleaning from the pull-down men u, and then click ...

  • Canon 200 - page 85

    Print Head Alignment 85 Routine Maintenance Print Head Alignment If the print head is not located at the regulated position, pr inted ruled lines could be misaligned. In such a case, adjust the print head position. ■ Aligning the Print Head Windows 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Open the Printer Prop ...

  • Canon 200 - page 86

    Print Head Alignment 86 Routine Maintenance Macintosh 1 With the printer on, load a sheet of A4 or Letter paper in the pr inter . 2 Open the P age Setup dialog bo x. The P age Setup dialog bo x can be nor mally opened b y selecting Pa g e Setup... in the File menu. 3 Click the Utilities button to open the Printer Utilities dialog bo x. 4 Select T e ...

  • Canon 200 - page 87

    Print Head Alignment 87 Routine Maintenance ■ Examining the Print Head Alignment P atter n Windows 1 Look at the print-out. F rom the patter ns in Column A, select the most ev en, least irregular patter n and enter the number . S200.book Page 87 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 88

    Print Head Alignment 88 Routine Maintenance 2 In the same wa y , one b y one, select the most e v en patter ns printed with the least irregularities from each of Columns B to E, enter their numbers, and click OK . If it is dif fi cult to pick the best pattern on Column E, pick the setting that produces the least noticeable v er tical white stripes ...

  • Canon 200 - page 89

    Print Head Alignment 89 Routine Maintenance Macintosh 1 Look at the print-out. F rom the patter ns in Column A, select the most ev en, least irregular patter n and enter the number . S200.book Page 89 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 90

    Print Head Alignment 90 Routine Maintenance 2 In the same wa y , one b y one, select the most e v en patter ns printed with the least irregularities from each of Columns B to E, enter their numbers and click Send . If it is dif fi cult to pick the best pattern on Column E, pick the setting that produces the least noticeable v er tical white stripe ...

  • Canon 200 - page 91

    Enabling Lo w Ink W ar ning 91 Routine Maintenance Enabling Lo w Ink W arning The low ink w ar ning can be enabled/disab led from the printer dr iv er . This noti fi es y ou of low ink le vels during printing. ■ How Lo w Ink W ar ning W or ks Enable a lo w ink warning when installing a new ink tank. Reset the ink counter of the ink tank installe ...

  • Canon 200 - page 92

    Enabling Lo w Ink W ar ning 92 Routine Maintenance ■ Low Ink W ar ning Displa y The '!' shows a lo w ink le vel in the ink tank. BJ Status Monitor (Windows) BJ Status Dialog (Macintosh) The colour ink becomes low . The colour ink becomes low . S200.book Page 92 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 93

    Enabling Lo w Ink W ar ning 93 Routine Maintenance Note ➤ When the background printing is enabled, the low ink warning is displayed on the BJ Print Monitor (Macintosh). ➡ BJ Print Monitor ■ How to Displa y Lo w Ink W ar ning Correctly • Reset the ink counter e very time you install a ne w ink tank The ink counter cannot work correctly unles ...

  • Canon 200 - page 94

    Enabling Lo w Ink W ar ning 94 Routine Maintenance ■ Setting Low Ink W ar ning Note ➤ Reset the ink counter every time installing a new ink tank when the low ink warning is enabled. Otherwise the ink levels will not be displayed accurately. • Enab ling Low Ink W ar ning Windows 1 Ensure the printer is on and open the Pr inter Proper ties dial ...

  • Canon 200 - page 95

    Enabling Lo w Ink W ar ning 95 Routine Maintenance 3 Select Low Ink W arning from the pull-down men u and click the Remaining ink level setting icon. 4 Select Display lo w ink warning and clic k Send . • Resetting Ink Counter Note ➤ Do not reset an ink counter of an ink tank already in use. Windows 1 Ensure the printer is on and open the Pr int ...

  • Canon 200 - page 96

    Enabling Lo w Ink W ar ning 96 Routine Maintenance 3 Select Remaining ink level setting from the pull-do wn menu and click Ink Counter Reset . 4 Select the ink tank you ha v e just installed and click Ex ecute . S200.book Page 96 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 97

    Setting Ink Dr ying W ait Time 97 Routine Maintenance Setting Ink Drying W ait Time When you set the ink dry-up time lev el, y ou can specify the printer which pr inting characteristic is pref erred; printing speed or quality . ■ How to Set the Ink Drying W ait Time Windows 1 Ensure the printer is on and open the Pr inter Proper ties dialog box. ...

  • Canon 200 - page 98

    Setting Ink Dr ying W ait Time 98 Routine Maintenance Macintosh 1 Ensure the printer is on and open the P age Setup dialog box. The P age Setup dialog bo x can nor mally be opened b y selecting Pa g e Setup... in the File menu. 2 Click the Utilities button to open the Printer Utilities dialog bo x. 3 Select Custom Setting from the pull-down men u, ...

  • Canon 200 - page 99

    T ranspor ting the Printer 99 Routine Maintenance T ranspor ting the Printer P ac k the pr inter carefully in its original packing materials. If you do not ha v e the original packing materials, pack the printer carefully and thoroughly in protectiv e mater ial inside of a sturdy bo x. 1 Unplug the printer . S200.book Page 99 Saturday, September 22 ...

  • Canon 200 - page 100

    T ranspor ting the Printer 100 Routine Maintenance 2 Remov e the paper rest and the paper output tra y . 3 Disconnect the printer cable from the computer and from the printer , and then disconnect the pow er cord from the pr inter . S200.book Page 100 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 101

    T ranspor ting the Printer 101 Routine Maintenance 4 Secure the printer with adhesive tape as sho wn, and then pack it in a plastic bag. S200.book Page 101 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 102

    T ranspor ting the Printer 102 Routine Maintenance 5 Attach protectiv e mater ial to both sides of the printer when packing the printer . Clearly label the box as “ F ragile ” , if using a transpor t company . S200.book Page 102 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 103

    103 Printing Media Printing Media • Compatib le Media T ypes • En velopes • High Resolution P aper HR-101N • Glossy Photo P aper GP-301N/GP-301 • High Gloss Photo Film HG-201 • Glossy Photo Cards FM-101 • Photo P aper Pro PR-101 • Photo P aper Pro PC-101S • T ransparencies CF-102 • T -Shir t T ransf ers TR-201 (TR-101 f or USA u ...

  • Canon 200 - page 104

    Compatible Media T ypes 104 Printing Media Compatible Media T ypes Y ou can use the f ollowing types of paper and other media. ■ Size • Standard paper : F rom A5 size (148.0 x 210.0 mm / 5.83 x 8.27 in) to legal size (215.9 x 355.6 mm / 8.5 x 14.0 in) • Non-standard paper : F rom 100.0 x 100.0 mm to 241.3 x 584.2 mm (F rom 3.94 x 3.94 in to 9 ...

  • Canon 200 - page 105

    Compatible Media T ypes 105 Printing Media ■ W eight 64 to 105 g/m 2 (17 to 28 lb) Do not use paper heavier than this , as it could jam in the printer . ■ T ypes The f ollowing types of media can be used. F or more inf or mation about the media and the printing methods, ref er to the speci fi c sections. Plain paper : Ref er to the Quic k Star ...

  • Canon 200 - page 106

    Env elopes 106 Printing Media En velopes Use either European DL or US Com. #10 size env elopes . ■ Preparation f or Printing 1 Press down on all f our corners and edges of the env elopes to fl atten them as shown belo w . 2 If the env elopes are curled, hold the opposite cor ners and gently bend them in the opposite direction. Ensure that the ? ...

  • Canon 200 - page 107

    Env elopes 107 Printing Media 3 If the leading edge of an env elope is puff ed up or curled, use a pen to press the env elope fl at and sharpen the crease. The env elopes ma y jam in the printer if they are not completely fl at and the edges are not aligned. Ensure that no curl or puff exceeds 3 mm (0.1 in). ■ Unsuitab le Env elopes • Env elo ...

  • Canon 200 - page 108

    Env elopes 108 Printing Media ■ Loading • Place env elopes lengthwise with the fl ap to the left and the address side f acing upwards . • Set the paper thickness le v er to the right. • Up to 5 env elopes can be loaded at once . P aper thic kness lev er P aper guide S200.book Page 108 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 109

    Env elopes 109 Printing Media ■ Printer Dr iv er Settings • Media T ype : Env elope • P age Size : Select either DL En v . or #10 En v . according to the en v elope size y ou are using • Orientation : P or trait ■ Handling of Printed Output Remov e each en velope as it is printed. ■ Printable Area ➡ Printing Area S200.book Page 109 Sa ...

  • Canon 200 - page 110

    High Resolution P aper HR-101N 110 Printing Media High Resolution P aper HR-101N This type of paper provides better colour reproduction than plain paper . It is suitab le f or printing business documents that f eature graphics , and f or photographs . ■ Loading • Load the paper with the whiter side f acing up . • Set the paper thickness le v ...

  • Canon 200 - page 111

    High Resolution P aper HR-101N 111 Printing Media ■ Printer Dr iv er Settings • Media T ype : High Resolution P aper • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output Do not stack more than 20 sheets in the paper output tr a y . If the output paper is curled, it ma y pre vent the ne xt ...

  • Canon 200 - page 112

    Glossy Photo P aper GP-301N/GP-301 112 Printing Media Glossy Photo P aper GP-301N/GP-301 This media is still thick er than High Resolution P aper with a glossy printing surf ace to produce print-outs close to photograph quality . ■ Loading • Load the paper with the whiter side f acing up . • Set the paper thickness le v er to the left. • Lo ...

  • Canon 200 - page 113

    Glossy Photo P aper GP-301N/GP-301 113 Printing Media Note ➤ When printing on Glossy Photo Paper GP-301, do not use any loading support sheet. ■ Printer Dr iv er Settings • Media T ype : Glossy Photo P aper • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each sheet as so ...

  • Canon 200 - page 114

    High Gloss Photo Film HG-201 114 Printing Media High Gloss Photo Film HG-201 This fi lm has an e xtremely glossy surf ace, ideal f or printing photographs with outstanding results. ■ Loading • Load only one sheet at a time. • Load the fi lm with the cut cor ner at the upper right. • If the fi lm is curled, fl atten it by curling in the ...

  • Canon 200 - page 115

    High Gloss Photo Film HG-201 115 Printing Media ■ Printer Dr iv er Settings • Media T ype : High Gloss Photo Film • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each sheet as soon as it is printed. • Do not touch the printed surface until the ink dries. ■ Printable Ar ...

  • Canon 200 - page 116

    Glossy Photo Cards FM-101 116 Printing Media Glossy Photo Car ds FM-101 Made of the same material as Glossy Photo P aper GP-301, this photo-size paper is intended f or printing images that cover the entire surf ace of the card, without a white border . T o take full adv antage of FM-101, make the images slightly larger than the area indicated by th ...

  • Canon 200 - page 117

    Glossy Photo Cards FM-101 117 Printing Media ■ Printer Dr iv er Settings • Media T ype : Glossy Photo P aper • P age Size : Select custom siz e and enter 119.6 x 215.9 mm (4.7 x 8.5 in). ■ Applications Settings Enter 109.6 x 160.4 mm (4.31 x 6.31 in) in Image Size . F or details on how to specify the image siz e, ref er to the applications ...

  • Canon 200 - page 118

    Photo P aper Pro PR-101 118 Printing Media Photo P aper Pr o PR-101 This is thick paper with a treated surf ace that enhances gloss and pro vides superior colour reproduction. It is ideal for printing high quality photographs . ■ Loading • Load only one sheet at a time. • Load the paper with the glossier side f acing up . • Set the paper th ...

  • Canon 200 - page 119

    Photo P aper Pro PR-101 119 Printing Media ■ Printer Dr iv er Settings • MediaT ype : Photo P aper Pro • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each sheet as soon as it is printed. • Do not touch the printed surface until the ink dries (appro x. 30 minutes). Colou ...

  • Canon 200 - page 120

    Photo P aper Pro PC-101S 120 Printing Media Photo P aper Pr o PC-101S Made of the same material as Photo P aper Pro PR-101, this photo-size paper is intended f or printing images that cover the entire surf ace of the card, without a white border . T o tak e full adv antage of PC-101S, mak e the images slightly larger than the area indicated by the ...

  • Canon 200 - page 121

    Photo P aper Pro PC-101S 121 Printing Media ■ Printer Dr iv er Settings • Media T ype : Photo P aper Pro • P age Size : Select Custom Size and enter 118.6 x 215.9mm (4.67 x 8.5 in). ■ Applications Settings Enter 109.6 x 160.4mm (4.31 x 6.31 in) in Image Size . F or details on how to specify the image siz e, ref er to the application ’ s u ...

  • Canon 200 - page 122

    T ransparencies CF-102 122 Printing Media T ransparencies CF-102 This fi lm is ideal f or printing presentation mater ial f or use with ov erhead projectors. Note ➤ For the customers in the United States, refer to the Quick Start Guide for instructions on using TR-101 T-shirt transfers. ■ Loading • Place one sheet of plain A4 or Letter paper ...

  • Canon 200 - page 123

    T ransparencies CF-102 123 Printing Media • Although you can print on either side of CF-102, best results can be obtained b y printing on the side toward which it curls when held by the edge . ■ Printer Dr iv er Settings • Media T ype : T ransparency • P age Size : Ensure the setting matches the siz e set in the application. ■ Handling of ...

  • Canon 200 - page 124

    T -Shirt T ransfers TR-201 124 Printing Media T -Shir t T ransfers TR-201 This paper is used to produce iron-on transf ers. The image is printed backwards when Media T ype is set to T -Shir t T ransf er in the pr inter driver . Note ➤ For the customers in the United States, refer to the Quick Start Guide for instructions on using TR-101 T-shirt t ...

  • Canon 200 - page 125

    T -Shirt T ransfers TR-201 125 Printing Media ■ Printer Dr iv er Settings • Media T ype : T -Shir t T ransf er • P age Size : Ensure the setting matches the size set in the application. ■ Handling of Printed Output • Remov e each T -shir t transf er as soon as it is printed. • The T -shir t transf er should be used as soon as possib le. ...

  • Canon 200 - page 126

    Banner P aper 126 Printing Media Banner P aper This is long paper that consists of consecutiv e sheets of A4 or Letter size paper , ideal for printing long posters or banners (up to six sheets long). ■ Preparation f or Pinting • When tearing the banner paper , tear off one more sheet than you actually need to print. • The maximum length f or ...

  • Canon 200 - page 127

    Banner P aper 127 Printing Media 3 Place the printer where the pr inted banner output can hang ov er the edge of the table . Ensure the ink does not stain the table or fl oor . S200.book Page 127 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 128

    Banner P aper 128 Printing Media ■ Printer Dr iv er Settings • Media T ype : Plain P aper • P age Size : When using A4 banner paper: A4 When using letter size banner paper: Letter • Printing T ype : Banner Printing On a Macintosh, bef ore creating the document, select Banner Printing in the P age Setup dialog bo x. • Copies : Must be set ...

  • Canon 200 - page 129

    129 T roubleshooting T r oubleshooting • Cannot Install the Printer Dr iv er • Print Quality is P oor or Contains Errors • Printer Does Not Star t or Stops Dur ing Print Jobs • P aper Does Not F eed Properly or P aper J ams • An Error Message is Displa y ed on the Screen • Low Ink W ar ning Displa ys Ink T ank with '?' • Pro ...

  • Canon 200 - page 130

    Cannot Install the Printer Dr iv er 130 T roubleshooting Cannot Install the Printer Driver ■ Follow the installation pr ocedure correctly . Install the printer dr iv er carefully follo wing the procedures described in the Quick Star t Guide . If the printer dr iv er was not installed correctly , reinstall it. If you are using Windo ws, delete the ...

  • Canon 200 - page 131

    Cannot Install the Printer Dr iv er 131 T roubleshooting ■ If the Installer for the printer driver does not start up automatically when y ou insert the Setup Software & User’ s Guide CD-ROM , open the My Computer windo w , and then double-c lick the CD-R OM icon. Note ➤ If you are typing in the file name, you must specify the CD-ROM drive ...

  • Canon 200 - page 132

    Print Quality is P oor or Contains Errors 132 T roubleshooting Print Quality is P oor or Contains Error s • Cannot Print to End of Job • Colours are Unclear • Meaningless Characters or Symbols are Printed • Printing is Blurred/Colours are Wrong • Straight Lines are Misaligned • Printed P aper Cur ls or Ink Blots • Bac k of P aper is S ...

  • Canon 200 - page 133

    Print Quality is P oor or Contains Errors 133 T roubleshooting Cannot Print to End of Job ■ Confirm the P age Size setting matches the size of the paper loaded in the printer . First, check the P age Size setting in the application. Then check the Pa ge Siz e setting in the Printer Proper ties dialog bo x f or Windows or the P age Setup dialog b ...

  • Canon 200 - page 134

    Print Quality is P oor or Contains Errors 134 T roubleshooting Colour s are Unclear ■ Confirm the Media T ype setting in the printer driver matches the type of paper loaded in the printer . If you are printing a photogr aph or an illustration from a Windows en vironment, also increase Print Quality on the Main tab . If you are w orking in a Maci ...

  • Canon 200 - page 135

    Print Quality is P oor or Contains Errors 135 T roubleshooting Meaningless Character s or Symbols are Printed ■ If the prob lem only occur s when printing a specific document, try editing the document and then printing it. If this does not resolv e the problem, there ma y be a prob lem with your application program. S200.book Page 135 Saturday, ...

  • Canon 200 - page 136

    Print Quality is P oor or Contains Errors 136 T roubleshooting Printing is Blurred/Colour s are Wr ong ■ Print the nozzle chec k pattern to ensure that ink is output correctly . If the nozzle check pattern does not print correctly , clean the pr int head. ➡ Printing the Nozzle Check P attern ➡ Print Head Cleaning If the problem is not resolv ...

  • Canon 200 - page 137

    Print Quality is P oor or Contains Errors 137 T roubleshooting Straight Lines are Misaligned ■ Align the print head. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 Click the Maintenance tab . 3 Click Print Head Alignment . F ollow the instructions on the screen. S200.book Page 137 Saturday, S ...

  • Canon 200 - page 138

    Print Quality is P oor or Contains Errors 138 T roubleshooting Macintosh 1 Open the P age Setup dialog bo x. The P age Setup dialog bo x can nor mally be opened b y selecting Pa g e Setup... in the File menu. 2 Click the Utilities button. 3 Select T est Print from the pull-down menu, and then clic k Print Head Alignment . F ollow the instructions o ...

  • Canon 200 - page 139

    Print Quality is P oor or Contains Errors 139 T roubleshooting ■ In the printer driver settings, select a higher print quality setting. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , clic k High f or the Print Quality setting. Macintosh 1 Open the Print dialog box. The Print ...

  • Canon 200 - page 140

    Print Quality is P oor or Contains Errors 140 T roubleshooting Printed P aper Curls or Ink Blots ■ Use high resolution paper or photo paper to print images that require a lot of ink, (i.e. pictures with intense colour s or photographs). ■ Reduce the Intensity setting in the printer driver and try printing again. Windows 1 Open the Printer Prope ...

  • Canon 200 - page 141

    Print Quality is P oor or Contains Errors 141 T roubleshooting Macintosh 1 Open the Print dialog box. The Print dialog box can normally be opened by selecting Print in the File menu. 2 F or Print Mode , select Man ual and then click Details . 3 Click the Colour / Color icon and then drag the Intensity slide bar to set the intensity . S200.book Page ...

  • Canon 200 - page 142

    Print Quality is P oor or Contains Errors 142 T roubleshooting Bac k of P aper is Sm udged ■ If the next pa ge prints before the ink is dry , clic k and draw the Ink Dry-Up Time slider to the rightmost position. Y ou can either remov e each printed sheet from the output tra y as soon as it is printed, or click and dr aw the Ink Dry-Up Time slider ...

  • Canon 200 - page 143

    Print Quality is P oor or Contains Errors 143 T roubleshooting Macintosh 1 Open the P age Setup dialog bo x. The P age Setup dialog bo x can nor mally be opened b y selecting Pa g e Setup... in the File menu. 2 Click the Utilities button. 3 Select Custom Settings f or m the pull-down men u. 4 Select P ause between pages ., and then clic k Send . S2 ...

  • Canon 200 - page 144

    Print Quality is P oor or Contains Errors 144 T roubleshooting Printed Surface is Scratched ■ Ensure y ou are using suitable paper . • The paper weight must be less than 105 g/m 2 (28 lb). If you use paper hea vier than 105 g/m 2 (28 lb), the print head ma y scratch the printed surf ace. Clean the print head fi rst and pr int with the correct ...

  • Canon 200 - page 145

    Print Quality is P oor or Contains Errors 145 T roubleshooting Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , select Manual f or Colour Adjustment / Color Adjustment , and then clic k Set . 3 Drag the Intensity slide bar to adjust the intensity . Macintosh 1 Open the Print dia ...

  • Canon 200 - page 146

    Print Quality is P oor or Contains Errors 146 T roubleshooting White Streaks ■ Print the nozzle chec k pattern to chec k the ink output. If a speci fi c colour does not print in the nozzle check pattern, clean the pr int head. ➡ Printing the Nozzle Check P attern ➡ Print Head Cleaning S200.book Page 146 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 147

    Print Quality is P oor or Contains Errors 147 T roubleshooting Colour s are Uneven or Streaked ■ Increase the print quality setting in the printer driver settings. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , clic k High f or the Print Quality setting. Macintosh 1 Open the ...

  • Canon 200 - page 148

    Print Quality is P oor or Contains Errors 148 T roubleshooting ■ Set the halftoning method to Diffusion in the printer driver settings. Windows 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Main tab , select Custom f or the Print Quality setting, and clic k Set . 3 Click Diffusion for the Hal ...

  • Canon 200 - page 149

    Printer Does Not Star t or Stops Dur ing Print Jobs 149 T roubleshooting Printer Does Not Star t or Stops During Print Jobs • Printing Does Not Star t • Printing Stops Before It is Completed • Printer Mov es But Does Not Pr int • Car tr idge Holder Does Not Mov e S200.book Page 149 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 150

    Printer Does Not Star t or Stops Dur ing Print Jobs 150 T roubleshooting Printing Does Not Star t ■ Ensure the printer is turned on. Check to see if the printer is plugged into the pow er outlet securely . Note ➤ When printing a large amount of data such as a photo or graphics, it takes longer than usual to begin printing. Simply wait until the ...

  • Canon 200 - page 151

    Printer Does Not Star t or Stops Dur ing Print Jobs 151 T roubleshooting ■ Ensure the correct printer driver is selected. In Windows , ensure that Canon S200 is selected in the Print dialog bo x. In Macintosh, ensure that S200 is selected in the Chooser . Note ➤ In Windows, you can set the Canon S200 as the default printer. ■ Ensure the print ...

  • Canon 200 - page 152

    Printer Does Not Star t or Stops Dur ing Print Jobs 152 T roubleshooting Printing Stops Bef ore It is Completed ■ When the printer is processing a lar ge amount of data. When the printer is processing a large amount of data such as a photo or graphics, it takes a long time f or the computer to process the data, during which the printer may appear ...

  • Canon 200 - page 153

    Printer Does Not Star t or Stops Dur ing Print Jobs 153 T roubleshooting Printer Mo ves But Does Not Print ■ Print the nozzle chec k pattern to ensure that ink is output correctly . If the nozzle check pattern does not print correctly , clean the pr int head. ➡ Printing the Nozzle Check P attern ➡ Print Head Cleaning If the problem is not res ...

  • Canon 200 - page 154

    Printer Does Not Star t or Stops Dur ing Print Jobs 154 T roubleshooting Car tridge Holder Does Not Move ■ Ensure the printer is turned on. The car tr idge holder will not mov e unless the po wer is on. Check to see if the printer is plugged into the pow er outlet securely . If not, close the front co ver , and then plug the printer to the power ...

  • Canon 200 - page 155

    P aper Does Not F eed Proper ly or P aper Jams 155 T roubleshooting P aper Does Not Feed Pr operl y or P aper Jams • P aper Does Not F eed Properly • P aper J ams S200.book Page 155 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 156

    P aper Does Not F eed Proper ly or P aper Jams 156 T roubleshooting P aper Does Not Feed Pr operl y ■ Confirm the paper conditions. • The paper is not too thick (less than 105g/m 2 / 28 lb). • The number of sheets loaded does not e xceed the recommended le v el. • The paper is not creased, curled or wr inkled. ➡ Compatible Media T ypes ? ...

  • Canon 200 - page 157

    P aper Does Not F eed Proper ly or P aper Jams 157 T roubleshooting P aper Jams Remov e the paper according to the f ollowing procedure . 1 Slowly pull the paper out, either from the sheet f eeder or from the paper output slot, whiche ver is easier . If the paper tears and a piece remains inside the printer , open the front cov er and remov e it. I ...

  • Canon 200 - page 158

    An Error Message is Displa yed on the Screen 158 T roubleshooting An Err or Message is Displa yed on the Screen • Error Writing to USBxxx • Application Error or General Protection F ault • Other Error Messages • Other Error Messages Windows Windows Windows Macintosh S200.book Page 158 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 159

    An Error Message is Displa yed on the Screen 159 T roubleshooting Err or Writing to USBxxx ■ Ensure the printer is turned on. The car tr idge holder will not mov e unless the po wer is on. Check to see if the printer is plugged into the pow er outlet securely . If not, close the front co ver , and then plug the printer to the power outlet. ■ En ...

  • Canon 200 - page 160

    An Error Message is Displa yed on the Screen 160 T roubleshooting In Windows XP/Windo ws 2000, click the Adv anced tab and then click Print directly to the printer . ■ V erify the USB port status. 1 Right-click My Computer and select Properties . In Windows XP , click the Start button, then right-clic k My Computer and select Properties . 2 On th ...

  • Canon 200 - page 161

    An Error Message is Displa yed on the Screen 161 T roubleshooting ■ Ensure that the printer port setting corresponds to the printer interface connection. 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Details tab (or Po r t s tab), select USBPRNnn (Canon S200) or USBnnn (Canon S200) ( “ n ? ...

  • Canon 200 - page 162

    An Error Message is Displa yed on the Screen 162 T roubleshooting Application Err or or General Pr otection Fault ■ Ensure the application program y ou are using is intended f or your operating system. F or e xample, if y ou attempt to pr int with a Windo ws 3.1 application under Windows 98, the application ma y not function correctly and an erro ...

  • Canon 200 - page 163

    An Error Message is Displa yed on the Screen 163 T roubleshooting ■ Check the amount of free space on the har d disk. Y ou ma y need to increase the amount of free space by deleting an y unnecessar y fi les. ■ If the prob lem only occur s when printing a specific document, try editing the document and then printing it. If this resolv es the p ...

  • Canon 200 - page 164

    An Error Message is Displa yed on the Screen 164 T roubleshooting Other Err or Messages ■ If the BJ Status Monitor is display ed, follo w the instructions on screen. If an error occurs during pr inting, the BJ Status Monitor displa ys the error on the Printer Status tab . Follo w the instructions on screen. In Windows Me or Windows 98, click the ...

  • Canon 200 - page 165

    An Error Message is Displa yed on the Screen 165 T roubleshooting ■ If one of the follo wing messages is display ed outside of the BJ Status Monitor: Could not spool successfully due to insufficient disk space Increase the amount of free space on the disk by deleting an y unnecessar y fi les. Could not spool successfully due to insufficient me ...

  • Canon 200 - page 166

    An Error Message is Displa yed on the Screen 166 T roubleshooting Other Err or Messages ■ If a message with the format “Error No.: Xn” (where “X” represents a letter and “n” represents a number) is displa yed: Error No.: X202 Not enough memor y f or printing. Increase a vailab le memor y by closing an y other applications currently ru ...

  • Canon 200 - page 167

    Low Ink W arning Displays Ink T ank with '?' 167 T roubleshooting Lo w Ink W arning Displa ys Ink T ank with '?' The ink le vel of an ink tank displa y ed with a '?' is not synchronised with its ink counter . BJ Status Monitor (Windows) BJ Status Dialog (Macintosh) The colour ink le vel ma y not be correctly displa yed ...

  • Canon 200 - page 168

    Low Ink W arning Displays Ink T ank with '?' 168 T roubleshooting Macintosh Note ➤ When the background printing is enabled, the low ink warning displays on the BJ Print Monitor (Macintosh). ➡ BJ Print Monitor ■ Reset the ink counter from the printer driver when y ou replace the ink tank. ➡ Resetting Ink Counter ■ T urn the low i ...

  • Canon 200 - page 169

    Low Ink W arning Displays Ink T ank with '?' 169 T roubleshooting Macintosh 1 Ensure the printer is on and open the P age Setup dialog box. The P age Setup dialog bo x can nor mally be opened b y selecting Pa g e Setup... in the File menu. 2 Click the Utilities icon to open the Pr inter Utilities dialog bo x. 3 Select Remaining ink le vel ...

  • Canon 200 - page 170

    Problems Unique to Windo ws 170 T roubleshooting Pr oblems Unique to Windows • The BJ Status Monitor is Not Displa y ed • Cannot Print in Background (Windo ws Me/Windows 98 only) Windows S200.book Page 170 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 171

    Problems Unique to Windo ws 171 T roubleshooting The BJ Status Monitor is Not Displa yed ■ Ensure “Enable bi-directional suppor t for this printer” is selected. 1 Open the Printer Proper ties dialog bo x. ➡ Opening the Printer Proper ties Dialog Bo x 2 On the Details tab , clic k Spool Settings and select “ Enable bidirectional suppor t f ...

  • Canon 200 - page 172

    Problems Unique to Windo ws 172 T roubleshooting Cannot Print in Bac kgr ound (Windo ws Me/Windo ws 98 onl y) ■ Check the amount of free space on the har d disk. Backg round printing requires a cer tain amount of disk space. Y ou may need to delete unnecessar y fi les, or disab le backg round printing. ■ Ensure that backgr ound printing is ena ...

  • Canon 200 - page 173

    Problems Unique to the Macintosh 173 T roubleshooting Pr oblems Unique to the Macintosh • J agged T e xt or Gr aphics, or Banded Gradations • Cannot Print in Background Macintosh S200.book Page 173 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 174

    Problems Unique to the Macintosh 174 T roubleshooting Jag ged T ext or Graphics, or Banded Gradations ■ Ensure y our application suppor ts Quick Dra w . If you are using a P ostScr ipt-compatib le application, pr inted te xt and lines ma y appear jagged and gradations ma y appear banded. As S200 is not a P ostScript printer but a Quick Dr aw prin ...

  • Canon 200 - page 175

    Problems Unique to the Macintosh 175 T roubleshooting Cannot Print in Bac kgr ound ■ Ensure backgr ound printing is enabled. 1 In the Apple menu, select Chooser . 2 Click Bac kgr ounding on. ■ Check the amount of free space on the har d disk. Backg round printing requires a cer tain amount of disk space. Y ou ma y need to remov e unnecessar y ? ...

  • Canon 200 - page 176

    176 Appendices Appendices • Deleting an Unknown De vice Windo ws S200.book Page 176 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 177

    Deleting an Unknown De vice 177 Appendices Deleting an Unkno wn Device If printer dr iv er installation was not successful, carr y out the procedure described in “ Notes on Handling the USB interf ace (f or Windows Users) ” in the Quick Star t Guide . If the problem remains , f ollow the steps belo w to delete the unknown de vice. 1 Click the S ...

  • Canon 200 - page 178

    Deleting an Unknown De vice 178 Appendices • If the unknown de vice is under Univer sal serial bus contr oller • If the unknown de vice is under Other de vices S200.book Page 178 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 179

    Deleting an Unknown De vice 179 Appendices 4 When the con fi r mation message appears, clic k OK . 5 Click Close to close the System Properties window . In Windows XP/Windo ws 2000, click and then clic k OK in the System Properties window . 6 Click at the top right of the Control P anel windo w to close it. 7 T ur n the pr inter off . 8 Remov e th ...

  • Canon 200 - page 180

    180 Specifications Specifications Printing method: Bubb le Jet on-demand Printing resolution: 2880 (horizontal) × 720 (v er tical) dpi.* max. * Ink droplets can be placed with a pitch of 1/2880 inch at minimum. Print speed (pr inting with Canon standard patter n): Black printing Draft: 5.0 ppm Standard: 3.8 ppm Colour printing Draft: 3.0 ppm Sta ...

  • Canon 200 - page 181

    181 Specifications Receiv e buff er : 64 KB Interf ace: USB -compatible Interf ace connector : USB standard Series B receptacle (USB interface) Recommended printer cable: Material: A WG28 (data wiring pair) or A WG20 to 28 (distribution pair) T ype: T wisted-pair shielded cable Length: Up to 5.0 m (16.4 ft) Connectors: USB standard Series B plugga ...

  • Canon 200 - page 182

    182 Specifications P o wer supply: Europe A C 230 V±10%, 50 Hz USA/Canada A C 120-127 V , 60 Hz A ustralia A C 240 V , 50 Hz P o wer consumption: Standby: Approx. 2 W Printing: Appro x. 18 W Ev en though you do not use the printer , it consumes a little po wer unless you unplug it. T o pre v ent such pow er consumption, disconnect the power plug ...

  • Canon 200 - page 183

    183 Specifications ■ F eed method: Continuous f eed through auto sheet f eeder F or Plain P aper , En v elopes, High Resolution P aper , Glossy Photo P aper , High Gloss Photo Film, Glossy Photo Cards, Photo P aper Pro , T ransparencies, T -shir t T r ansfers , Banner P aper ■ Sheet f eeder capacity: Plain P aper (75 gsm) 50 sheets max. High R ...

  • Canon 200 - page 184

    184 Specifications ■ Ordinar y pr int media: Regular size: A4, A5, B5, Letter , Legal, European DL, US Com.#10 Custom size: width: 100.0 to 241.3 mm (3.94 to 9.5 in)* height: 100.0 to 584.2mm (3.94 to 23.0 in)* *e xcept Banner P aper . W eight: 64 to 105 g/m 2 (17 to 28 lb) Canon Special media: High Resolution P aper HR-101N Glossy Photo P aper ...

  • Canon 200 - page 185

    185 Specifications ■ Graphic image printing: Data f or mat: Canon e xtended mode: Raster image f or mat Resolution: Canon extended mode: 360, 720, 2880 dpi ■ Print Head: Black: 64 nozzles (360 dpi) Cyan, Magenta, Y ello w: 24 nozzles per each colour (360 dpi) ■ Ink T anks: Capacity: Black (BCI-24 Blac k) approx. 340 *1 , appro x. 520 *2 Colo ...

  • Canon 200 - page 186

    186 Specifications ■ Printer dr iv er operating en vironment: IBM PC/A T -compatible computer running on Windows XP , Windo ws Me, Windo ws 2000, Windows 98 or Macintosh computers with USB interf ace running on Mac OS 8.6 - Mac OS 9.X ■ Hard disk space: Appro x. 15 MB to install on Windows Me and Windows 98, 30 MB on Mac OS , or appro x. 25 MB ...

  • Canon 200 - page 187

    187 Specifications ■ Printing Area T o ensure the best pr int quality , the printer allows a margin along each edge of media. Printing area (dar k blue): Canon recommends that you print within this area. () Printable area (light b lue): The area where it is possible to print. Howe v er , printing in this area can adv ersely affect the print qual ...

  • Canon 200 - page 188

    188 Specifications A4, B5, A5 Size Printable Area (width x height) A4 203.2 × 287.0 mm / 8.0 × 11.3 in B5 175.2 × 247.0 mm / 6.9 × 9.8 in A5 141.2 × 200.0 mm / 5.6 × 7.9 in Recommended printing area Printable area 3.0 mm / 0.12 in 25.4 mm / 1.0 in 23.5 mm / 0.93 in 7.0 mm / 0.28 in 3.4 mm / 0.13 in 3.4 mm / 0.13 in S200.book Page 188 Saturda ...

  • Canon 200 - page 189

    189 Specifications Letter , Legal Size Printable Area (width x height) Letter 203.2 × 269.4 mm / 8.0 × 10.6 in Legal 203.2 × 345.6 mm / 8.0 × 13.7 in Recommended printing area Printable area 3.0 mm / 0.12 in 28.0 mm / 1.1 in 7.0 mm / 0.28 in 26.5 mm / 1.04 in 6.4 mm / 0.25 in 6.3 mm / 0.25 in S200.book Page 189 Saturday, September 22, 2001 2:3 ...

  • Canon 200 - page 190

    190 Specifications Glossy Photo Cards Size Printable Area (width x height) Glossy Photo Card 109.4 × 159.9 mm / 4.3 × 6.3 in Recommended printing area (Printable area is the same.) 28.0 mm / 1.1 in 26.0 mm / 1.02 in 5.1 mm / 0.2 in 4.1 mm / 0.16 in S200.book Page 190 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 191

    191 Specifications Photo P aper Pro (PC-101S) Note ➤ The printing area of Photo Paper Pro PR-101 is identical to that of A4 size paper. For details, refer to ” A4, B5, A5 ” . Size Printable Area (width x height) Photo P aper Pro PC-101S 109.6 × 160.4 mm / 4.3 × 6.3 in Recommended printing area (Printable area is the same.) 28.0 mm / 1.1 in ...

  • Canon 200 - page 192

    192 Specifications En velopes Size Printable Area (width x height) European DL 203.2 × 100.0 mm / 8.0 × 3.9 in US Com. #10 203.2 × 94.8 mm / 8.0 × 3.7 in Printable area 3.0 mm / 0.12 in 7.0 mm / 0.28 in 6.4 mm / 0.25 in European DL: 10.4 mm / 0.41 in US Com. #10: 31.7 mm / 1.25 in S200.book Page 192 Saturday, September 22, 2001 2:34 PM ...

  • Canon 200 - page 193

    193 Specifications Banner P aper Size Printable Area (width x height) Banner P aper A4: 203.2 × 1772.0 mm / 8.0 × 69.8 in Letter : 203.2 × 1666.4 mm / 8.0 × 65.6 in Recommended printing area Printable area 25.4 mm / 1.0 in 3.0 mm / 0.12 in 7.0 mm / 0.28 in 3.4 mm / 0.13 in 3.4 mm / 0.13 in Min. 2 sheets Max. 6 sheets S200.book Page 193 Saturda ...

  • Canon 200 - page 194

    194 Inde x A Application Error 162 B Background printing (Macintosh) 61 Background printing (Windows) 172 Banner Paper 126 BCI-24 Black 72 BCI-24 Color 72 BJ Print Monitor (Macintosh) 61 BJ Status Dialog (Macintosh) 92, 167 BJ Status Monitor (Macintosh) 68 BJ Status Monitor (Windows) 37, 92, 164, 167, 171 Booklet Printing 27 C Cancelling a Print Jo ...

  • Canon 200 - page 195

    195 Inde x D Deep Cleaning 35, 83 Deleting an Unknown Device (USB interface) 177 Duplex Printing 27 E Enabling Low Ink Warning 91 Envelopes 106 Error Message 158, 164, 166 F Front cover 16, 154 G Gamma Correction (Macintosh) 56 General Protection Fault 162 Glossy Photo Cards FM-101 116 Glossy Photo Paper GP-301N/GP-301 112 H High Gloss Photo Film H ...

  • Canon 200 - page 196

    196 Inde x L Low Ink Warning 36, 91 Low Ink Warning Displays Ink Tank with '?' 167 M Media Type (Macintosh) 49 Media Type (Windows) 24 N Network (Macintosh) 65 Nozzle Check Pattern 80 O Opening the Printer Properties Dialog Box (Windows) 21 P [Page Setup] Dialog Box (Macintosh) 45 Page Size (Windows) 26 Paper Jams 157 Paper Output Tray 16 ...

  • Canon 200 - page 197

    197 Inde x [Print] Dialog Box (Macintosh) 49 Print Head Lock Lever 18 Print Mode (Macintosh) 49 Print server (Macintosh) 65 Printable area 187 Printer Driver (Macintosh) 43 Printer Driver (Windows) 20 Printer port 161 Printer Properties Dialog Box (Windows) 21, 23 Printing Area 187 Printing the Nozzle Check Pattern 77 R Replacing an Ink Tank 72 Res ...

  • Canon 200 - page 198

    198 Inde x U Uninstalling Printer Drivers (Macintosh) 69 Uninstalling Printer Drivers (Windows) 42 USB interface 177 USB Port 17, 160 V Vivid Photo 32 W When to Replace Ink Tank and Maintain Print Head 71 S200.book Page 198 Saturday, September 22, 2001 2:34 PM ...

Manufacturer Canon Category Printer

Documents that we receive from a manufacturer of a Canon 200 can be divided into several groups. They are, among others:
- Canon technical drawings
- 200 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon 200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon 200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon 200, service manual, brief instructions and user manuals Canon 200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon 200.

Similar manuals

A complete manual for the device Canon 200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon 200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon 200.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon 200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon 200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon 200, that we can find in the current document
3. Tips how to use the basic functions of the device Canon 200 - which should help us in our first steps of using Canon 200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon 200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon 200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon 200?

Use the form below

If you did not solve your problem by using a manual Canon 200, ask a question using the form below. If a user had a similar problem with Canon 200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)