English dropdown-ico

Manual Zonet ZPS1000

73 pages Not applicable
Download

Go to site of 73

Summary
  • Zonet ZPS1000 - page 1

    T ABLE OF C ONTENTS C OPYRIGHT ........................................................................................................................................ 3 1. INTRODUCTION ........................................................................................................................... 4 P RODUCT O VERVIEW ................... ...

  • Zonet ZPS1000 - page 2

    O VERVIEW ........................................................................................................................................ 61 U PGRADING THE PRINT SERVER FROM PSA DMIN ........................................................................... 61 U PGRADING THE PRINT SERVER FROM W INDOWS NT/2000/XP (T HROUGH TCP/IP) ........ ...

  • Zonet ZPS1000 - page 3

    T rademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003 are registered tr ademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. Copyright No part of this publication ma y be reproduced in any form or by any means or used to make any derivativ ...

  • Zonet ZPS1000 - page 4

    1. Introduction Product Overview The external print servers enhanc e capability by letting you place your printers, plotters, or equality printers at convenient locations dire ctly on the Ethernet net work, and by increasing network printer performance and management. Network Management The print servers support the Simple Networ k Management Proto ...

  • Zonet ZPS1000 - page 5

    Before you start, y ou should prepare:  One Win9X/Me/2000/XP/2003 co mputer with CD-ROM  One Printer with USB port Hardware Installation To install the print server(s), you need to complete these steps: ˙ Confirm that your printer port work well. ˙ Connect the print server to the network and printer(s) and plug in the print server. ˙ Creat ...

  • Zonet ZPS1000 - page 6

    2 . P rint S erver I nstallation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments, the print server suppor ts industrial standard protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk. This means that the print server supports the most popular network operating system ...

  • Zonet ZPS1000 - page 7

    NetWare 3.12, 4.x, 5.x HP Web JetAdmin Windows NT/2000/XP/2003 NetWare 3.12, 4.x, 5.x Remote management of print server, include alert and consumables Print server solution for continual management of multiple printers- anywhere on your LAN Internet Printing Protocol Windows NT/2000/XP/2003 Printing via the internet to Internet Printing Protocol- e ...

  • Zonet ZPS1000 - page 8

    The PSAdmin is a proprietary Windows based m anagement program that can assist you in configuring and managing your pr int server in NetWare environments. The program can be run from any Windows PC. Installing the Setup Wizard To install Wizard, please follow the directions listed below . 1. Insert the Utility CD into your CD-ROM drive. 2. The Auto ...

  • Zonet ZPS1000 - page 9

    9 ...

  • Zonet ZPS1000 - page 10

    Click NEXT ; the wizard will automatically discover the print server. 6. Select YES if you want to change the configuration and press NEXT to continue. 10 ...

  • Zonet ZPS1000 - page 11

    11 ...

  • Zonet ZPS1000 - page 12

    7. Configure TCP/IP settings. If you have a DHCP server on the network, select “Obtain an IP address automatically”, or click “Specify and IP address” and input the IP, Mask, and Gateway IP addresses. Click “Next”. 8. TCP/IP settings saved, click Next to start install the printer for your PC. 12 ...

  • Zonet ZPS1000 - page 13

    9. Click Next and choose the printer you want to insta ll. You can also add a new printer in this step. 13 ...

  • Zonet ZPS1000 - page 14

    If the printer is not listed under Printer Na me, click on Add New Printer and follow the below instruction. A fter new printer is added the printer will be listed under the Print Name section, select the printer and click NEXT. 14 ...

  • Zonet ZPS1000 - page 15

    10. Click Next and setup program will display the summary of your printer’s configuration. 11. Now, your print server has been su ccessfully connected with your printer. 15 ...

  • Zonet ZPS1000 - page 16

    Using PSAdmin After PSAdmin is successfully installed, run the program by double-clicking the PSAdmin icon from “ Network Print Server ” program. The screen will then a ppear as follow picture. All print server(s) feature Novell NetWare function on the LAN will be displayed along with their respective device name, MAC Address, prin t server nam ...

  • Zonet ZPS1000 - page 17

    MAC Address : The Ethernet address of the print server. Print server Name : The print server to which the device is attached. Version : The firmware version of the print server. Status : To come up a Printer’s status presently. Wizard Wizard is a configuration progr am that can assist you in se tting up the necessary parameters for your print ser ...

  • Zonet ZPS1000 - page 18

    4 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. 5 (Optional) In the Gateway field, type the IP address of gateway. 6 When done, click OK button. The program will save t he above settings into the print server. 7 Done NetWare Wizard 1. Log into your NetWare file server as a Sup ...

  • Zonet ZPS1000 - page 19

    5. Type in a Print Queue Names. Note: Each print queue corresponds to each print port of the print server. 6. Click OK . 7. Done. 8. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. Manual Setup Manual Setup is a configurati ...

  • Zonet ZPS1000 - page 20

    7. (Optional) In NDS Settings , Select NetWare file server(s), NetWare 4.x or la ter that print server can do NDS mode. 8. Click OK . From your NetWare client comput er, such as Windows 95/98/Me, create a printer that is connected (redirected) to one of the NetWare print queues serviced by the print server. Properties –TCP/IP Options The TCP/IP o ...

  • Zonet ZPS1000 - page 21

    Subnet Mask: This option shows the print server’s current subnet mask maybe obtained from the DHCP server or manually spec ified. This option also lets you manually specify a subnet mask to the print server, if DHCP option is disabled. This value is optional . Gateway : This option shows the print server’s current gateway address maybe obtained ...

  • Zonet ZPS1000 - page 22

    2. Reset allows the user to reset the print server device in order to establish a new connection or for new settings to take effect. Refresh 1. Click Refresh button just like a picture ＜ ＞ . 2. Refresh searches the network for all attached print server(s). Note : Configure the print speed in the Advanced label, must match the printer’s speed ...

  • Zonet ZPS1000 - page 23

    Procedure: 1. Click Start , point to Settings , and select Control Panel . 2. Double click the Add/Remove Programs icon. 3. Click Change or Remove Programs tab. 4. Select Network Print Monitor for Windows 95/98/NT/2000/XP and click Change/Remove button. 5. The un-installation wiz ard program will be launched. 6. Follow the directions on the screen ...

  • Zonet ZPS1000 - page 24

    4. I nternet P rinter C onnection and HP W eb J etAdmin IPP Overview Print server(s) support the Internet Printing Pr otocol (IPP). Using the appropriate software on your system, you can create an IPP print path from your system as Windows PC over the Internet. Note: For incoming print path requests, the network administrator have to configure the ...

  • Zonet ZPS1000 - page 25

    6. In URL’s box, input print server’s IP address, for example, http://1 92.168.10.182/lp1. Then Click Next . ** One port should be the port name as lp1. ** Three ports should be the port name as lp1, lp2, and lp3. 7.It will check print server to connect to HP printer, if not, it will appear as follow picture. Then Click OK . 8. Select the appro ...

  • Zonet ZPS1000 - page 26

    9.If you want your Windows-based pr ograms to use this printer as the default printer, please select “ Yes ”, and Click Next . It will appear as follow picture 12. Click Finish button. 13. Done. HP Web JetAdmin Overview HP Web JetAdmin allows you to use a Web browse to revise, view, manage and diagnose devices connected to the print server or a ...

  • Zonet ZPS1000 - page 27

    Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the installation files from HP Customer Care Online at http://www.hp.com/go/webjetadmin/ . Follow the instructions on the screen to in stall the HP Web JetAdmin software. Note: Installation instructions are also ...

  • Zonet ZPS1000 - page 28

    5. C onfiguration from E mbedded W eb S erver Overview The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for exampl e, IE 4.0, Netsc ape 4.0 or above is recommended. The embedded web server provides access to configuration and management pages for the print server and the connected perip ...

  • Zonet ZPS1000 - page 29

    Device Name: This option allows you to view device nam e of the print server. To correct the print server’s device name. System Contact: This option allows you to view contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to view Location name of the prin ...

  • Zonet ZPS1000 - page 30

    Manufacturer: This option allows you to view manufac turer of the printer. When the printer connected with the print server, it will be show in the manufacture box. Model Number: This option allows you to view model of the printer. When the printer connected with the print server, it will be show in the model box. Printing Language Supported: This ...

  • Zonet ZPS1000 - page 31

    Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP addr ess from the print server. The IP address must meet the IP addressing requi reme ...

  • Zonet ZPS1000 - page 32

    General Settings: Print Server Name: This option allows you to view print server’s name would be configured by PSAdmin utility. Polling Time: This option allows you to view polli ng time from the print server. This function is search for NetWare Server by per time . NetWare NDS Setting: Use NDS Mode: Enable or Disable. Name of the NDS Tree. Name ...

  • Zonet ZPS1000 - page 33

    1.Click Status , it then appears the sub-menu. 2.Click AppleTalk , it then as shown in the following picture. Zone Name: If no any zone exists, the print server itself displays the zone name as an asterisk ( * ) in the current AppleTalk Status of the print server in the web browser. Port Name: < ATALK_PS > -xxxxxx-1 , where xxxxxx represent s ...

  • Zonet ZPS1000 - page 34

    SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server. SNMP Traps: This option allows you to view SNMP traps from the print server. Setup Menu Meanwhile, you have finished the IP address conf iguration with print server. ...

  • Zonet ZPS1000 - page 35

    Email Alert: This option allows the wireless to s end e-mail to the administrator when the printer is ready or offline. Device Name: This option allows you to input device nam e of the print server. To correct the print server’s device name. System Contact: This option allows you to input contac t name of the print server. To check the print serv ...

  • Zonet ZPS1000 - page 36

    ˙ User Name: You must be input the defaul t administration user name: admin as login user name. ˙ Password : The default password is empty. After setup password is completed from the print server, you should to remember this password to input password box. TCP/IP Status: 1. Click Setup , it then appears the sub-menu. 2. Click TCP/IP , it then as ...

  • Zonet ZPS1000 - page 37

    2.Select NetWare and type in the Print server that created during PC ONSOLE Select the NetWare File Server to which the print server device will be attached. 3.Click Setup , it then appears the sub-menu. 4.Click NetWare , it then as shown in the following picture. Print Server Name: This option allows you to input pr int server name which configure ...

  • Zonet ZPS1000 - page 38

    Due to its architecture and func tionality, the print server mu st work under NetWare 4.x/5.x NDS Bindery Emulation. When you in stall the NetWare file server for the first time, by default, the installation program will automatically set up the Bindery Emulation function for you by adding “SET BINDERY CONTEXT =” in the AU TOEXEC.NCF file. By d ...

  • Zonet ZPS1000 - page 39

    The print server can print jobs submitted fr om Macintosh workstations connected to an Ethernet using AppleTalk protoc ol. The basic configuration is for the print server in an AppleTalk environment is per formed simply by opening the Chooser window and selecting a printer that is connected to the print server. 1.Click Setup , it appears the sub-me ...

  • Zonet ZPS1000 - page 40

    Setting Up a Macintosh Computer 1. At a Macintosh computer, from the Apple menu, select Chooser . 2. The Chooser window then displays an Apple Zone list. Select the Zone name that you specified when configuring the PRINT SERVER. Note: If you select a Zone that the PRINT SERVER doesn’t belong to, as you specified in the previous section, no N7119+ ...

  • Zonet ZPS1000 - page 41

    authentication purpose. The prin t server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default. When an unusual condition or activity occu rs, the SNMP agent alerts the SNMP manager through SNMP traps . Following list summaries SNMP trap messages that the print server will ...

  • Zonet ZPS1000 - page 42

    SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default. Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin. SNMP Traps: Enable the function of sending SNMP Au thentication Failure trap messa ...

  • Zonet ZPS1000 - page 43

    6. Network Print Monitor Preparation The print server supports TCP/IP , IPX/SPX and NetBEUI protocols under MS-Windows. Please make sure that the following steps have been completed before proceeding with installation under Windows PC. Select A Desired Protocol TCP/IP  The TCP/IP Protocol must be installed. For further information, please read ? ...

  • Zonet ZPS1000 - page 44

    7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address automatically”, if a DHCP se rver is available on the LAN. 8. Restart the computer. 9. Done. Note: Using TCP/IP protocol to access the pr int server requires well-configured TCP/IP settings. If you are not familiar with thes e settings, please consult your ...

  • Zonet ZPS1000 - page 45

    8. Done. Note: For more detailed information, please refer to your Mi crosoft Windows 9X/ME/NT/2000/XP manuals. Windows 95/98/Me/NT/2000/XP Installation Procedure Please perform the steps as follows to ensure a smooth installation: 1. Run Setup from the print server’s NetWare, Win 95/98/Me/NT/2000/XP Setup diskette 2. The Network Print Monitor fo ...

  • Zonet ZPS1000 - page 46

    15. Select the Network Print Port and click OK . 16. The Add Port box will then appear, al ong with the print server’s Node ID (The last 6 digits of the Node ID, located on the back of the print server unit) . Select one printer server port from the list, which is now connec ted to (one of) your printer(s), as shown in the following picture.  ...

  • Zonet ZPS1000 - page 47

     It starts again to search for the print server on the network by us ing the protocol you specify in the step above. W hen finished, the print server will be displayed along with the its Node ID, as shown in the following picture. (The last 6 digits of the Node ID, located on the back of the print server unit) . Select one of the print server’ ...

  • Zonet ZPS1000 - page 48

    7. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP environment, IP addresses are essential as a basic means of communications. It is therefor e necessary to first assign an IP address to your print server unit. After assigning an IP address, the print server can be configured ac ...

  • Zonet ZPS1000 - page 49

    5. From the Printer Ports box as shown in the following picture, select the LPR Port . 6. The Add LPR compatible printers box will then appear as shown in the following picture. Type in the IP address assigned to the print server in the Name or address of server providing lpd box. 7. In the Name of printer or print queue on that server box, type in ...

  • Zonet ZPS1000 - page 50

    2. Run Add Printer , Click Next . 3. The Add Printer Wizard screen will appear, Select Local Printer and click Next . 4. From the type of Create a new port box as shown in the following picture, select the Standard TCP/IP Port , Click Next and Next . 5. The Add Standard TCP/IP Printer Port Wi zard box will then appear as shown the picture as below, ...

  • Zonet ZPS1000 - page 51

    7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for ex ample, lp1 for Port 1, lp2 for Port 2 and lp3 for Port 3. 8. Click OK , and Next . Note: Please DO NOT type any other name than lp1 or lp2 or lp3 in this step. 9. Click Finish . 10. Select the appropriate pr ...

  • Zonet ZPS1000 - page 52

    11. Type in a new Printer name or leave it in default, and click Next button. 12. A message reading, “To confirm that the printer is installed properly, you can print a test page”. Select Yes (Recommended) and click Finish . 13. Done. 52 ...

  • Zonet ZPS1000 - page 53

    UNIX Installation After the IP address is assigned, the Print Server is ready to be configured. For some popular UNIX systems, SCO OpenServer and UnixWare , Sun Solaris , IBM AIX , and Linux , we include the detailed installation procedures below. If you can’t find the installation procedure corresponding to your UNIX system, please refer to your ...

  • Zonet ZPS1000 - page 54

    b. Do you wish to change the printer d escription file /etc/printcap (y/n) [n] ? ---------> y c. Enter information for remote printers or local printers accepting remote printing requests Please enter the printer name (q to quit): ---> printer-1 You can enter a printer name you like in this option. d. Is xxxx a remote printer or a local print ...

  • Zonet ZPS1000 - page 55

    5. Quit from tftp, and then use your editor to modify the “05 BoxIPAddress” field in the config.txt file from 0.0.0.0 to the IP address you specify in Step 2. 6. (Optional) Modify the "06 Gateway" field from 0.0.0.0 to your gateway's IP address. 7. (Optional) Modify the "07 SubnetMask" field from 0.0.0.0 to the subnet m ...

  • Zonet ZPS1000 - page 56

    9. Select Standard Process . 10. In the Queue Name option, type in a printer name. For example: printer-1 11. In the Host Name option, type in the IP address of the Print Server. Note: You can add the host name associated with the IP address in the /etc/hosts file. If you have done this, please use the host name instead of the IP address. 12. I n t ...

  • Zonet ZPS1000 - page 57

    f. Click New button. g. Click Forward button. 57 ...

  • Zonet ZPS1000 - page 58

    h. In the Name field, type a user-defined name, click Forward . i. In the Queue Type field, choose Networked UNIX . j. In the Server field, type the IP of print server k. In the Queue field, type a print server’s port name, which connect to the printer. For example: lp1. l. Click Forward button. 58 ...

  • Zonet ZPS1000 - page 59

    m. In the Printer field, choose Postscript Printer . n. Choose the model of printer and click Forward . o. Done. 59 ...

  • Zonet ZPS1000 - page 60

    UnixWare 7 1. Login root . 2. Run CDE ( Common Desktop Environment ). 3. Open the subpanel under the SCO icon in the Front Panel . 4. Select SCO Admin . 5. Select Print Setup Manager from System Administration window. 6. Click LPD icon in the tool bar of Print Setup window. 7. In Name field, type a name for the printer for identification purpose. 8 ...

  • Zonet ZPS1000 - page 61

    8. U pgrading P rint S erver Overview Upgrading print server will allow you to replace its firmware inside the print server while the newer software version of the pr int server is available from your local dealer. Depending on the different systems users might use, this chapt er is divided into several Sections; please refer to the following list ...

  • Zonet ZPS1000 - page 62

    5. Done! Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3. Type “ tftp <print server’s IP address> ”. 4. At tftp prompt, type “ get upgrade ”. 5. Change to binary mode. 6. At tftp prompt, type “ put mpsXX.bin ”. 7. Wait for the file tran ...

  • Zonet ZPS1000 - page 63

    4. Click Upgrade form Browser and select the firmware file. 5. Click Upgrade . 6. Done. 63 ...

  • Zonet ZPS1000 - page 64

    9. T roubleshooting General Troubleshooting Overview The most common problems, which cause t he print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact your dealer for technical support. LED Light Indicators The print server is equipped with LED to assist in diagnosing pr ...

  • Zonet ZPS1000 - page 65

    USB Port Related Problems Printing data failure may be caused by a loose c onnection of the print server to the USB port of the printer. Check to see if the USB connectors are damaged. In addi tion, check the cable connection. If the connectors ar e damaged, contact your dealer for a replacement connector. Windows 95/98/Me/NT/2000/XP Troubleshootin ...

  • Zonet ZPS1000 - page 66

    11. Repeat the Steps 8-12 fo r the other Ethernet adapter. 12. Restart the computer . 13. Done. Moving the print server to A New Segment If the print server is moved from one network s egment to another after t he initial installation, through the Network Print Port, the print server must be reconfigured on the original Windows NT server or on each ...

  • Zonet ZPS1000 - page 67

    9. Done! Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me computer and your computer is going to be moved onto another segment, you have to reconfigure the print server on your com puter to use your print server. However, this situation is like moving the print ser ...

  • Zonet ZPS1000 - page 68

    B. The print server's IP address is duplicated or is as same as another computer's IP address on the network. If this is the case, please consult your netwo rk administrator to obtain an unused IP address for your print server. C. The print server is on one segment and your Windows NT server is on the other segment. (This troubleshooting ...

  • Zonet ZPS1000 - page 69

    6. In your editor, modify " BoxIPAddress " field from "0.0.0.0" to "192.72.214.100". Leave other options as default and do not change their values . When done, save this new file and quit from your editor. Please note, in this step you must specify an IP address which is valid on Segment B, such as 192. 72.214.100 in t ...

  • Zonet ZPS1000 - page 70

    Appendix: Load Default Value You can load the default value of print server by press the reset button. Please press 5 to 10 seconds until the status LED flash and the default value is restored. Or, you can load the default setting from the WEB management as following: 70 ...

  • Zonet ZPS1000 - page 71

    Frequently Asked Questions Question A Print jobs are sent to the print queue successf ully, but fail to be sent to the printer. Possible explanations 1. The Print server Name/Print Queue c onfiguration in PCONSOLE is incorrect. 2. The Print server name specified and stored in the print server memory doesn’t match the same one set in PCONSOLE. 3. ...

  • Zonet ZPS1000 - page 72

    Question D The Status LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print server must be upgraded again by using the PSAdmin. Please see Chapter 3 for details. Question E The PSAdmin reports “Create Print server Error”, “Create Printer Error”, or “Create Print Queue ...

  • Zonet ZPS1000 - page 73

    73 Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 lase r printer with the print server through the Network Print Port under Windows 95/98, please r edirect the printer named “ Panasonic KX-P6100 PCL ” or “ Panasonic KX-P6300 PCL ”, or “ Panasonic KX-P6500 PCL ” to the pr ...

Manufacturer Zonet Category Print Server

Documents that we receive from a manufacturer of a Zonet ZPS1000 can be divided into several groups. They are, among others:
- Zonet technical drawings
- ZPS1000 manuals
- Zonet product data sheets
- information booklets
- or energy labels Zonet ZPS1000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zonet ZPS1000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zonet ZPS1000, service manual, brief instructions and user manuals Zonet ZPS1000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zonet ZPS1000.

Similar manuals

A complete manual for the device Zonet ZPS1000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zonet ZPS1000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zonet ZPS1000.

A complete Zonet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zonet ZPS1000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zonet ZPS1000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zonet ZPS1000, that we can find in the current document
3. Tips how to use the basic functions of the device Zonet ZPS1000 - which should help us in our first steps of using Zonet ZPS1000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zonet ZPS1000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zonet ZPS1000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zonet ZPS1000?

Use the form below

If you did not solve your problem by using a manual Zonet ZPS1000, ask a question using the form below. If a user had a similar problem with Zonet ZPS1000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)