English dropdown-ico

Manual Toshiba IK-TF9U

34 pages 0.44 mb
Download

Go to site of 34

Summary
  • Toshiba IK-TF9U - page 1

    For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information f or future ref erence. Model #: IK-TF9U Serial #: CAMERA CONTR OL UNIT IK-TF9U INSTR UCTION MANU AL FCC NO TICE This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursu- ant to P ar t 15 o ...

  • Toshiba IK-TF9U - page 2

    2 SAFETY PRECA UTIONS Safety icons This manual contains saf ety instr uctions that must be observed in order to av oid potential hazards that could result in personal injuries, damage to y our equipment, or loss of data. These saf ety cautions hav e been classified according to the ser iousness of the risk, and the icons highlight these instruction ...

  • Toshiba IK-TF9U - page 3

    3 Note the follo wing instructions when installing. • Do not cov er the product by any material. • Do not put the product on an Inflammable material such as carpet or blanket. • Do not put the product in a narrow space , since the heat generated from the product may be difficult to emanate . If you do not f ollow the abov e, the heat generate ...

  • Toshiba IK-TF9U - page 4

    4 1. CAUTIONS ON USE AND INST ALLA TION ..... 5 2. COMPONENTS ................................................ 5 3. NAMES AND FUNCTIONS .............................. 6 4. CONNECTION .................................................. 7 4. 1 Standard Connection ................................ 7 4. 2 Cautions on Connection .......................... ...

  • Toshiba IK-TF9U - page 5

    5 1. CA UTIONS ON USE AND INST ALLA TION • Handling the unit. Do not drop , jolt, or vibrate, as this ma y result in damage to the unit. This ma y cause problems. T reat the camera cables carefully to pre vent cable problems, such as breaks in the cab le and loose connections. • Install the camera in a location free from noise. If the camera or ...

  • Toshiba IK-TF9U - page 6

    6 3. NAMES AND FUNCTIONS 1 Camera cable f or ‘IK-TF9H’ terminal Where the camera cab le for ‘IK-TF9H’ is connected. 2 DISP button Used when switching the displa y . 3 PA GE b utton Used when switching to the men u and when selecting the menus. 4 MENU UP button Select the function to be confirmed or changed on the menu. 5 MENU DOWN b utton S ...

  • Toshiba IK-TF9U - page 7

    7 4. CONNECTION 4. 1 Standard Connection DC IN 12V Camera cable for IK-TF9U IK-TF9U Camera control unit Cable (option) (option) IK-TF9H (option) Lans (option) Frame grabber board, image process equipment etc. Monitor DC power supply (option) DC IN 12V Connector used: HR10A-7R-4PB (HIROSE electronics Co. Ltd) or equivalent. DIGITAL Function I/O 1 +1 ...

  • Toshiba IK-TF9U - page 8

    8 5. OPERA TION A camera head “IK-TF9H” is supposed to be connected to this camera control unit from this section. 1 Refer to the item " 4. CONNECTION", connect each equipment correctly . 2 Tu rn on the connected equipment and the power source of the camer a. 3 When using the camera f or the first time and when replacing the camera ca ...

  • Toshiba IK-TF9U - page 9

    9 Meaning A utomatic white balance adjustment finished correctly . A utomatic white balance adjustment cannot be perf or med because the video lev el is too low . Obtain the proper video lev el. A utomatic white balance adjustment cannot be perf or med because the video lev el is too high. Obtain the proper video lev el. A utomatic white balance ad ...

  • Toshiba IK-TF9U - page 10

    10 Process Electronic shutter 6. ITEMS CONTROLLED BY USING ON SCREEN DISPLA Y MODE E. TRG MANU speed Syncro . scan. Pa r tial read Tr igger (1P SNR/SR) Tr igger (PW SNR/SR) 1P e xposure time MODE MANU MODE Color temperature MANU AL R GAIN MANU AL B GAIN GAMMA Master pedestal R pedestal B pedestal Shading correction mode Manual shading correction H ...

  • Toshiba IK-TF9U - page 11

    11 E. TRG RR E. TRG E. TRG 1P SR 1P SNR E. TRG PW SR E. TRG PW SNR SS MANU AWB WHT BAL OFF MANU OFF SHAD. SHAD. MANU MANU PAGE PAGE PAGE PAGE EXT INT BAUD RATE SHUTTER GAIN PROCESS SYNC OPTION PAGE PAGE POWER ON DISP PAGE PAGE DISP DISP Video signal output Index menu Menues 7. MODE SETTING BY ON SCREEN DISPLA Y Va r ious settings can be controlled ...

  • Toshiba IK-TF9U - page 12

    12 MANU AL : It is possible to select the e xposure time from elev en speed setting; OFF , 1/100s, 1/250s, 1/500s, 1/1000s, 1/2000s , 1/4000s, 1/10000s, 1/25000s, 1/50000s , 1/100000s. Note: When setting a rapid shutter speed, sensitivity degrades according to the speed. When a discharging light suc h as fluorescent lamp, etc. is used for the illum ...

  • Toshiba IK-TF9U - page 13

    13 • Sutter mode MANU, SS, E.TRG • Sutter speed setting OFF, 100 (1/100s), 250 (1/250s), 500 (1/500s) 1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s) 10000 (1/10000s), 25000 (1/25000s) 50000 (1/50000s)100000 (1/100000s) • Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps -- SHUTTER -- MO ...

  • Toshiba IK-TF9U - page 14

    14 OFF : 2H/1592H ∼ 1590H/1592H ↔ OFF ↔ 2FRM ↔ 512FRM 30fps, E.30fps : 2H/1060H ∼ 1058H/1060H ↔ OFF ↔ 2FRM ↔ 512FRM 40fps, E.40fps : 2H/774H ↔ 772H/774H ↔ OFF ↔ 2FRM ↔ 512FRM • Sutter mode MANU, SS, E.TRG • Synchro. scanning setting • Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps ...

  • Toshiba IK-TF9U - page 15

    15 -- SHUTTER -- MODE E.TRG E.TRG 1P SNR TRG.P EXP. 50ms PART OFF <MODE = E.TRG E.TRG = 1P SNR> • E.TRG mode • Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps 1P SNR, 1P SR, PW SNR, PW SR, RR 0.01 ms 0.02 ms 0.4 ms 1 ms 20 ms 50 ms 0.01 ms step 0.02 ms step 0.1 ms step 1 ms step 2 ...

  • Toshiba IK-TF9U - page 16

    16 -- SHUTTER -- MODE E.TRG E.TRG 1P SR TRG.P EXP. 50ms PART OFF 0.01 ms 0.02 ms 0.4 ms 1 ms 20 ms 50 ms <MODE = E.TRG E.TRG = 1P SR> • E.TRG mode • Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps 1P SNR, 1P SR, PW SNR, PW SR • Input trigger pulse setting at 1P SNR and 1P SR • ...

  • Toshiba IK-TF9U - page 17

    17 -- SHUTTER -- MODE E.TRG E.TRG PW SNR TRG.P PART OFF <MODE = E.TRG E.TRG = PW SNR> • Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps Input trigger pulse : positive polarity Input trigger pulse : negative polarity • E.TRG mode 1P SNR, 1P SR, PW SNR, PW SR, RR • Input trigger p ...

  • Toshiba IK-TF9U - page 18

    18 -- SHUTTER -- MODE E.TRG E.TRG PW SR TRG.P PART OFF <MODE = E.TRG E.TRG = PW SR> • Partial scanning switch OFF/25fps/30fps/35fps/40fps/45fps/50fps/ E25fps/E30fps/E35fps/E40fps/E45fps/E50fps Input trigger pulse : positive polarity Input trigger pulse : negative polarity 1P SNR, 1P SR, PW SNR, PW SR, RR • Input trigger pulse setting at P ...

  • Toshiba IK-TF9U - page 19

    19 -- GAIN -- MODE MANU MANU 0dB • Gain mode MANU, OFF • Manual gain 0 dB to 18 dB (10 dB step) Move up down By pushing MENU UP, DOWN Set by pushing DATA UP, DOWN ( 2 ) GAIN (Video gain) When the image is dark ev en if the lens ir is is open, change the gain (video gain) to get the proper video le vel. F or the gain adjustment of the unit, MANU ...

  • Toshiba IK-TF9U - page 20

    20 ( 3 ) WHT B AL (White balance) WHT BAL has two modes; AWB , MANU. Set the " → " to MODE, push the [DA T A UP], [D A T A DOWN], and select mode among A WB, MANU . (3. 1) Changing each setting in A WB (Automatic White Balance) mode (a) Changing color temperature setting 1 Set the " → " to C.TEMP b y pushing [MENU UP], [MENU ...

  • Toshiba IK-TF9U - page 21

    21 ( 4 ) PROCESS • Gamma Correction (GAMMA) Select either OFF or ON of Gamma Correction. • Master P edestal (M. PED) Set the P edestal level of each RGB . •R P edestal (R. PED) Set the P edestal level of Red. •B P edestal (B. PED) Set the P edestal level of Blue . • Shading Correction (SHAD .) Due to the lens used or the environmental con ...

  • Toshiba IK-TF9U - page 22

    22 • Serial baud rate 9600, 19200 -- OPTION -- BAUD RATE 9600 Move up down By pushing MENU UP, DOWN Set by pushing DATA UP, DOWN (4. 5) Changing the shading correction mode 1 Set the " → " to SHAD . by pushing [MENU UP], [MENU DOWN] b uttons. 2 Set the SHAD . by pushing [D A T A UP], [DA T A DOWN] buttons. Note: The alignment value f ...

  • Toshiba IK-TF9U - page 23

    23 7. 3 Synchr o. Scan Operation The shutter speed can be set by the doub le hor izontal scanning period (2H) or by the frame . ( 1 ) Setting by 2H 2H/1592H ~ 1590H/1592H stands for the setting b y the 2H and the shutter speed can be set by the 2H (62.8 µ s). When operating P ar tial Scannig, the number’ s listed below can be used for setting. 2 ...

  • Toshiba IK-TF9U - page 24

    24 About 1 µ s Exposure period* 2 Exposure period* 2 Tr igger* 1 Negative polarity mode P ositive polarity mode RGB data (video interval image) (Internal VD) * 3 FV AL LV AL, DVA L 58H ( Pa r tial scanning OFF ) 40H ( Pa r tial scanning 25fps) 56H ( Pa r tial scanning 30fps) 66H ( Pa r tial scanning 35fps) 78H ( Pa r tial scanning 40fps) 80H ( Pa ...

  • Toshiba IK-TF9U - page 25

    25 About 1 µ s Exposure completion 0 to 2H* 3 Exposure period* 2 Tr igger* 1 Negative polarity mode P ositive polarity mode (Internal VD) RGB data (video interval image) FV AL LV AL, DVA L 58H ( Pa r tial scanning OFF ) 40H ( Pa r tial scanning 25fps) 56H ( Pa r tial scanning 30fps) 66H ( Pa r tial scanning 35fps) 78H ( Pa r tial scanning 40fps) 8 ...

  • Toshiba IK-TF9U - page 26

    26 ( 3 ) PW SNR (Pulse width trig g er SYNC-NON RESET) The trigger input to CC1 of the DIGIT AL ter minal dev elops 1 frame images. ( 3. 1) Pulse Width T rigger SYNC-NON RESET Picture Output Timing *1: Externally input signal *2: Exposure time = T rigger pulse width + 6 µ s (V alid trigger pulse width is 2 µ s or greater for e xter nal trigger sh ...

  • Toshiba IK-TF9U - page 27

    27 ( 4 ) PW SR (Pulse width trig g er SYNC-RESET) The trigger input to the CC1 of the DIGIT AL ter minal dev elops 1 frame images. (4. 1) 1 Pulse Width T rigg er SYNC-RESET Picture Output Timing *1: Externally input signal *2: Exposure time = T rigger pulse width + 6 µ s (V alid trigger pulse width is 2 µ s or greater for e xter nal trigger shutt ...

  • Toshiba IK-TF9U - page 28

    28 ( 5 ) RR (Reset restart) Input of an external reset-restart signal (CC4 of the DIGIT AL terminal: External VD input) permits one screen of information to be output at an arbitrary timing. (5. 1) Long T erm Exposure When a sufficient sensitivity is not obtained with the normal operation conditions or capturing the tr ial of a moving subject is de ...

  • Toshiba IK-TF9U - page 29

    29 7. 5P ar tial Read 1/20s (1592H) Video interval image 1/25s (1270H): When 25fps is selected 1/30s (1060H): When 30fps is selected 1/35s (910H): When 35fps is selected Video interval image 1/40s (774H): When 40fps is selected 1/45s (706H): When 45fps is selected 1/50s (636H): When 50fps is selected CC2 ‘L’ ‘H’ E.25fps Pa r tial scanning 2 ...

  • Toshiba IK-TF9U - page 30

    30 External Sync. signal Match the phase. LVAL signal output 7. 6 External Sync When using the unit with an external sync signal, input HD and VD to CC3 and CC4 of the DIGIT AL ter minal. When the external sync signal is input, the camera automatically s witches its sync from the inter nal sync to the e xternal sync. The operation is as shown belo ...

  • Toshiba IK-TF9U - page 31

    31 8. OUTPUT W A VEFORM TIMING CHART ( 1 ) Horizontal Output Wa veform Timing Chart 2048 2048 1 LVAL、 DVAL RGB data Horizontal blanking interval 492 clk (6.08 µ s) Output video interval 2048 clk (25.3 µ s) One horizontal scan interval 2540 clk (31.4 µ s) CLK=12.36nsec (80.8736MHz) Pixel Clock LVAL、 DVAL FV AL RGB data (CCD READOUT) Video out ...

  • Toshiba IK-TF9U - page 32

    32 9. SPECIFICA TIONS Po w er supply Po w er consumption Pick-up system Image sensor Scanning System Video output pix els Pixel cloc k frequency Sync signal frequency Sync system Sensitivity Minimum illumination Lens mount Ambient temperature Ambient humidity W eight External dimension White balance Gain Pa r tial scanning Output signal Sync signal ...

  • Toshiba IK-TF9U - page 33

    33 11. BEFORE MAKING A SER VICE CALL 10. EXTERNAL APPEARANCE DIA GRAM Unit : inch [mm] * inch = mm/25.4 1.73 [44] 1.73 [44] 0.87 [22] 0.25 [6.3] 0.21 [5.3] 78 [3.07] 0.19 [4.8] 0.19 [4.8] 2.20 [56] 0.18 [4.5] 1.02 [26] 1.02 [26] 0.96 [24.5] 0.98 [25] 0.76 [19.2] 0.98 [25] 0.47 [12] 34 [1.33] 2-M2 4-M2 Depth 3 4-M3 Depth 3 0.32 [8.2] Symptom No imag ...

  • Toshiba IK-TF9U - page 34

    Limited W arranty – TOSHIB A CCD Camera The Imaging Systems Division of T oshiba America Information Systems, Inc. ("ISD") makes the f ollowing limited warranties with regard to this CCD Camera ("Product"). These limited warranties e xtend to the Or iginal End-User ("Y ou[r]"). One (1) Y ear Limited Warranty of Labor ...

Manufacturer Toshiba Category Camera Accessories

Documents that we receive from a manufacturer of a Toshiba IK-TF9U can be divided into several groups. They are, among others:
- Toshiba technical drawings
- IK-TF9U manuals
- Toshiba product data sheets
- information booklets
- or energy labels Toshiba IK-TF9U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toshiba IK-TF9U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toshiba IK-TF9U, service manual, brief instructions and user manuals Toshiba IK-TF9U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toshiba IK-TF9U.

Similar manuals

A complete manual for the device Toshiba IK-TF9U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toshiba IK-TF9U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toshiba IK-TF9U.

A complete Toshiba manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toshiba IK-TF9U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toshiba IK-TF9U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toshiba IK-TF9U, that we can find in the current document
3. Tips how to use the basic functions of the device Toshiba IK-TF9U - which should help us in our first steps of using Toshiba IK-TF9U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toshiba IK-TF9U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toshiba IK-TF9U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toshiba IK-TF9U?

Use the form below

If you did not solve your problem by using a manual Toshiba IK-TF9U, ask a question using the form below. If a user had a similar problem with Toshiba IK-TF9U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)