Manual APC ACAC40000

9 pages 0.39 mb
Download

Go to site of 9

Summary
  • APC ACAC40000 - page 1

    Installation NetShelter ® AV Rack Cooling ACF600 ACF601 ACAC40000 ACAC40001 ...

  • APC ACAC40000 - page 2

    NetShelter AV Rack Cooling Ins tallation 1 American Power Conversion Legal Disclaimer The information presented in this manua l is not warranted by the American Power Conversion Corporation to be autho ritative, erro r free, or complete. This publication is not meant to be a substitute for a detailed operational and site sp ecifi c development plan ...

  • APC ACAC40000 - page 3

    Installing the Rack Fan Panel (ACF600) The NetShelter AV 2U rack fan panel can be used to cool individual devices or to draw air into or out of a rack. Before installing the fan panel, determine its application. 1. Determine the desired airflow direction and reverse the fans if necessary. Airflow direction is indicated by an arrow on each fan. a. T ...

  • APC ACAC40000 - page 4

    4. Connect the provided power cord to the fan panel. To ensure polarity protection, align TIP to +. Note: Reversing polarity will not damage the fan panel, but the fan panel will not operate until the power cord is connected correctly. 5. Ensure that the voltage switch on the power supply is set to at least 7 Volts and that no wires or other obstru ...

  • APC ACAC40000 - page 5

    Installing the Rack Fan Temperature Controller (ACF601) The Rack Fan Temperature Controller is designed to provide on/off and variable speed fan control based on the ambient temperature of the unit. The unit features two jumper selectable on/off set points, ident ified by an ’L’ (low) and ‘H’ (high) on the unit’s circuit board. 1. Set the ...

  • APC ACAC40000 - page 6

    3. Turn on the temperature controller by connecting it between the Rack Fan Panel and the supplied power cord as shown below. Note: For proper functionality, the power supply must be set to 12 Volts. Note: Observe proper polarity by connecting TIP to +. 4. Install the sensor on the bracket us ing the supplied hook and loop faste ner. Note: Be sure ...

  • APC ACAC40000 - page 7

    Installing the Vent Panel (ACAC40000) and Vent Panel with Temperature Display (ACAC40001) 1. Install the Vent Panel in an open 2U space using the 10-32 t hreaded screws provided. 2. Install the temperature sensor in the area to be monitored. (ACAC40001 Only) Note: To monitor a specific device, position the sensor near the component’s ventilation ...

  • APC ACAC40000 - page 8

    2. Route the sensor cable and the power cable through the hole in the center of the Fan Panel and secure the cables to the back of the Fan Panel using the provided wire ties. 3. To secure cable when routing it in either direction from the center, use the wire tie slots positioned along the edge of the Fan Panel. NetShelter AV Rack Cooling Ins talla ...

  • APC ACAC40000 - page 9

    NetShelter AV Rack Cooling Ins tallation 8 Customer support and warranty informati on is available at the APC Web site, www.apc.com . © 7/22/10 APC by Schneider Electr ic. APC, the APC l ogo, and NetShelter are o wne d by Schneider Electric Industries S.A.S., American Power Conversion Corporation, or their affiliated co mpanies. All other trademar ...

Manufacturer APC Category Stereo Receiver

Documents that we receive from a manufacturer of a APC ACAC40000 can be divided into several groups. They are, among others:
- APC technical drawings
- ACAC40000 manuals
- APC product data sheets
- information booklets
- or energy labels APC ACAC40000
All of them are important, but the most important information from the point of view of use of the device are in the user manual APC ACAC40000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals APC ACAC40000, service manual, brief instructions and user manuals APC ACAC40000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product APC ACAC40000.

Similar manuals

A complete manual for the device APC ACAC40000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use APC ACAC40000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of APC ACAC40000.

A complete APC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual APC ACAC40000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the APC ACAC40000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the APC ACAC40000, that we can find in the current document
3. Tips how to use the basic functions of the device APC ACAC40000 - which should help us in our first steps of using APC ACAC40000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with APC ACAC40000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of APC ACAC40000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning APC ACAC40000?

Use the form below

If you did not solve your problem by using a manual APC ACAC40000, ask a question using the form below. If a user had a similar problem with APC ACAC40000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)