Manual Bosch Appliances MIC612

80 pages 2.13 mb
Download

Go to site of 80

Summary
  • Bosch Appliances MIC612 - page 1

    MIC612 Thermal Camera MIC612 en Installation Manual ...

  • Bosch Appliances MIC612 - page 2

    ...

  • Bosch Appliances MIC612 - page 3

    MIC612 Thermal Camera Table of Cont ents | en 3 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 T able of Contents 1S a f e t y 6 1.1 About this Manual 6 1.2 Conventions in this Man ual 6 1.3 Legal Information 6 1.4 Important Safety Instructions 6 1.5 EC Directives 8 1.6 Important Notices 8 1.7 FCC and ICES Complian ...

  • Bosch Appliances MIC612 - page 4

    4 en | Table of Cont ents MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5.4 Setting the Addresses of the Two Cameras of the MIC612 33 5.4.1 Setting the Address of the Optical Camera via FastAddress 34 5.4.2 FastAddress, Bosch Protocol 34 5.4.3 FastAddress, Pelco Protocols 35 5.4.4 Active Comm ...

  • Bosch Appliances MIC612 - page 5

    MIC612 Thermal Camera Table of Cont ents | en 5 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 10.4 Pre-position Tour 64 10.5 Azimuth, Elevation, and Compass Directions 64 10.5.1 Setting the Azimuth Zero Point 64 10.5.2 Displaying Azimuth, E lev ation, and Compass Headings 65 11 Maintenance and Troubles hooting 66 ...

  • Bosch Appliances MIC612 - page 6

    6 en | Safety MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 1S a f e t y 1.1 About this Manual This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of pr inting. Because of the ongoing develop ...

  • Bosch Appliances MIC612 - page 7

    MIC612 Thermal Camera Safety | en 7 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 1. Install according to the manufacturer’s instructions. 2. Do not install near any heat sources such as furnaces, radiators, heaters, s toves, or other equipment (including amplifiers) that produce heat. 3. Do not install the came ...

  • Bosch Appliances MIC612 - page 8

    8 en | Safety MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 8. Do not point the camera at the sun. Bosch Security Systems will no t be liable for any damage to cameras that have been pointed directly at the sun. 9. Do not back drive the pan or tilt axis of the camera. Doing so will damage the ...

  • Bosch Appliances MIC612 - page 9

    MIC612 Thermal Camera Safety | en 9 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 – For 18 VAC units, voltage applied to the un it's power input should not exceed ±10%. User-supplied wiring must comp ly with local electrical cod es (Class 2 power levels ). Do not ground the supply at the terminals or at th ...

  • Bosch Appliances MIC612 - page 10

    10 en | Safety MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 1.7 FCC and ICES Compliance FCC ET ICES INFORMATION (commercial applications) (U.S.A. and Canadian Models Only, CLASS A) This device complies with part 15 of the FCC Rules . Operation is subject to the following conditions: – this ...

  • Bosch Appliances MIC612 - page 11

    MIC612 Thermal Camera Safety | en 11 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision, qui procédera à une opération co rrective. La brochure suivante, publiée par la Commission fédérale des communications (FCC) ...

  • Bosch Appliances MIC612 - page 12

    12 en | Unpacking MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 2 Unpacking – This equipment, although ruggedized, should be unpacked and handled with care. Check the exterior of the packaging for visible da mage. If an item appears to have been damaged in shipment, notify the shipper immed ...

  • Bosch Appliances MIC612 - page 13

    MIC612 Thermal Camera Installation Overview | en 13 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 3 Installation Over view The MIC Series cameras are designed for easy ins tallation on a variety of common fittings. The most common type of mount used is a dedic ated CCTV camera pole whe re the camera is bolted dire ...

  • Bosch Appliances MIC612 - page 14

    14 en | Installation Over view MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 3.1 T ypical Mounting Arra ngements Below are examples of typical mounting arrangements for MIC Series came ras. Figure 3. 2 T ypical pole mount (showing Pole Mount Brack e t (MIC-PMB) wit h Shallow Condui t Adapt er ...

  • Bosch Appliances MIC612 - page 15

    MIC612 Thermal Camera Installation Overview | en 15 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Figure 3. 4 T ypical corner mount (fr om left to right: W a ll Moun t Bracket (MIC -WMB), Shallow Condui t Adapter (MIC-SCA), and Corner Moun t Bracket (MIC-CM B)) 3.2 Mounting Positions MIC Series 612 cameras are des ...

  • Bosch Appliances MIC612 - page 16

    16 en | Installation Over view MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 3.3 About the MIC Shielded Composit e Cable MIC shielded composite cables are multi-conduc tor cables of various lengths (and gauges ranging from 14 - 18) that provide all power, video, and telemetry connections betw ...

  • Bosch Appliances MIC612 - page 17

    MIC612 Thermal Camera Installation | en 17 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 4 Installation 4.1 T ypical Installation Conf igurations Example 1: Configuration with Bosch Biphase pr otocol connection, which requires MIC-BP3or MIC-BP4 (sold separately). Figure 4. 1 MIC612 connected t o a MIC power supply ...

  • Bosch Appliances MIC612 - page 18

    18 en | Installation MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. Example 2: Configuration with RS-485 protocol connection Figure 4. 2 MIC612 connected t o a MIC power supply , which is connecte d to a head-e nd control syst em by RS-485. 4.2 Over view of Installation St eps Follow these ste ...

  • Bosch Appliances MIC612 - page 19

    MIC612 Thermal Camera Installation | en 19 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 4.3 Mounting the Camera To mount a MIC Series camera, follow these steps: 1. Identify a secure location for the mount and for the camera. Locate the mounting position so that the camera cannot be inte rfered with intentionally ...

  • Bosch Appliances MIC612 - page 20

    20 en | Installation MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. example, one of the securing bolts) to th e camera’s outside case, and should be attached to the Earth terminal post on the PCD base of the camera. – If the system is copper throughout and the camera pictures are fed back ...

  • Bosch Appliances MIC612 - page 21

    MIC612 Thermal Camera Installation | en 21 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 4.4.1 Earth Link on PCB The printed circuit board (PCB) has one Earth Link option, near terminal bloc k HD1, to allow the PSU to be set up for different earthing schemes: – If there is a separate connection between vi deo sc ...

  • Bosch Appliances MIC612 - page 22

    22 en | Installation MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 4.4.3 Layout of MIC Power Supply Units (PSUs) for MIC612 The figure below displays the layout of the PC B in the MIC PSUs for non-IR cameras, with call- out numbers to the side of or below the connec tion/terminal ID or the te ...

  • Bosch Appliances MIC612 - page 23

    MIC612 Thermal Camera Installation | en 23 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 4.4.4 Installation Instructions DANGER! – ELECTRICAL SHO CK HAZARD To reduce the risk of electr ical shock, di sconnect power b efore opening or working on any power supply unit. Power must be disconne cted before replacing ...

  • Bosch Appliances MIC612 - page 24

    24 en | Installation MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. To install the power supply, follow these steps: 1. Select the mounting position of the MIC PSU so that it cannot be interfered with either intentionally or accidentally. Bosch recommends using a lockable cabinet. 2. Locate th ...

  • Bosch Appliances MIC612 - page 25

    MIC612 Thermal Camera Installation | en 25 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 8. Remove the blanking plug. Install suitable (metal) conduit in place of the blanking plug. Secure the conduit as recommended by the conduit manufacturer. 9. Prepare the power cable as need, then feed the c able into the encl ...

  • Bosch Appliances MIC612 - page 26

    26 en | Installation MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 18. Connect the shielded composite cable to term inal block HD3 (and, if necessary, HD6 and HD7) following the color coding as shown in the figure below, and printed on the PCB. Figure 4. 8 Exploded View of Composite Cable Con ...

  • Bosch Appliances MIC612 - page 27

    MIC612 Thermal Camera Installation | en 27 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 * If connecting a heater, see Section 4.4.5 Commissionin g the Camera with Heater Option Fitte d . 19. Slide back the cable so that th e sh ield is in the middle of the gland. 20. Tighten the cable gland so that it grips fi rm ...

  • Bosch Appliances MIC612 - page 28

    28 en | Installation MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 29. After wiring is complete, connect th e power supply to the power source. 30. Verify that the following LEDs are lit: 31. Re-attach the enclosure lid and tighten the four (4) captive screws on the cover door to ensure that ...

  • Bosch Appliances MIC612 - page 29

    MIC612 Thermal Camera Installation | en 29 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 5. Locate the Brown and Grey wi res from the composite cab le. 6. Connect the heater wires Brown and Grey to terminal block HD6 as labelled on the PCB. The heaters are thermostatically controlled and will automatically turn on ...

  • Bosch Appliances MIC612 - page 30

    30 en | G et ting Started MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5 G e t ting Star ted Install and wire the camera acco rding to the instructions in th is manual and in the manuals that accompany the power supply and mounting devices. A typical system includes a keyboard, matrix switch ...

  • Bosch Appliances MIC612 - page 31

    MIC612 Thermal Camera Ge t t i n g S t a r t e d | e n 31 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 In Pelco Protocol Mode, the camera is conf igured from the factory f or RS-485 operation. 1. Connect the controller's Tx te rminals to the Tx terminals in the power supp ly box. See the MIC Series Power Sup ...

  • Bosch Appliances MIC612 - page 32

    32 en | G et ting Started MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5.3.2 Navigating the On-Screen Display (OSD) Menus The OSD menus provide access to the programmable settings of the camera. The OSD displays only the submenus that are applicable to a particular MIC configuration. Some me ...

  • Bosch Appliances MIC612 - page 33

    MIC612 Thermal Camera Ge t t i n g S t a r t e d | e n 33 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 5.3.5 Special Preset Commands, Pelco Protocol Some Pelco mode preset commands have a special meaning and override the normal Pelco preset function as follows: 5.4 Se t ting the Addresse s of th e T wo Cameras of ...

  • Bosch Appliances MIC612 - page 34

    34 en | G et ting Started MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. The figure below illustrates the connection conf iguration of a MIC612, a matrix switcher, a monitor, and a keyboard. 5.4.1 Setting the Address of the Optical Camera via FastAddress The MIC612 offers remote addressing of ...

  • Bosch Appliances MIC612 - page 35

    MIC612 Thermal Camera Ge t t i n g S t a r t e d | e n 35 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 – ON-998-ENTER : Displays and programs all cameras with or without an address in the system. – ON-997-ENTER : Displays the current address statu s of all cameras in the system simultaneously. To set an addre ...

  • Bosch Appliances MIC612 - page 36

    36 en | G et ting Started MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 5. Use the joystick to enter the unique identifier for the camera. – Move the joystick up or do wn to select the number. – Move the joystick right to move to the next number position. 6. Move the joystick right to sel ...

  • Bosch Appliances MIC612 - page 37

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 37 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 6 On-Screen Displa y (OSD) Menus (Bosch Prot ocol) This chapter identifies and describes each OSD me nu option, as well as the default setting for each option, for Bosch protocol. For step- ...

  • Bosch Appliances MIC612 - page 38

    38 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.1 Camera Se tup Menu The Camera Setu p Menu contains settings that can be changed/customized for the optical (visible) camera. White Bal Maintains proper color reproduction (white ba lance ...

  • Bosch Appliances MIC612 - page 39

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 39 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Backlight Comp Improves image quality when the background i llumination level is hi gh. Options: ON, OFF (default setting). WDR Wide Dynamic Range. Options: ON, OFF (default setting), AUTO. ...

  • Bosch Appliances MIC612 - page 40

    40 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.2 Thermal Camera Se tup Menu The Thermal Camera Setup Menu contains se ttings that can be changed for the thermal camera. Thermal Mode Adjusts the display mode for the thermal camera. Opti ...

  • Bosch Appliances MIC612 - page 41

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 41 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 6.3 Lens Setup Menu The Lens Setup Menu contains lens settings that can be changed/customized. Auto Focus Automatically focuses on the subject in the center of the screen. Options: Auto Iri ...

  • Bosch Appliances MIC612 - page 42

    42 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.4 PTZ Setup Menu The PTZ Setup Menu contains pan/tilt/zoom settings that can be changed/customized. AutoPan Adjusts speed of camera during AutoPan and AutoScan. Sliding sc ale: –(1º/sec ...

  • Bosch Appliances MIC612 - page 43

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 43 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Autopivot Automatically rotates the camera 180º when following a subject traveling directly beneath the camera. Options: ON (default setting), OFF. Orientation Selects mounting options. Op ...

  • Bosch Appliances MIC612 - page 44

    44 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. Camera OSD Controls how the OSD displays camera response information, such as Digital Zoom, Iris open/ close, and Focus near/far. Options: ON (default setting), OFF. Display Adjust Adjusts t ...

  • Bosch Appliances MIC612 - page 45

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 45 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 6.6 Communication Se tup Menu The Communication Setup Menu contains baud rate and Bilinx control settings. AutoBaud Turns on AutoBaud detection, which detects and adjusts the camera protoco ...

  • Bosch Appliances MIC612 - page 46

    46 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.7 Alarm Setup The Alarm Setup Menu contains alarm inputs, outputs and rules. Multi Alarm Setup Allows setup of multiple alarms. Options: On; Of f. Checkbox button to "Select". Th ...

  • Bosch Appliances MIC612 - page 47

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 47 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 On models with the 35 mm ther mal lens, you can also select either High Temp Thermal Meter or Low Temp Thermal Meter, to trigger an alarm on the OSD if th e thermal spot me ter identifies t ...

  • Bosch Appliances MIC612 - page 48

    48 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. Rule Setup Submenu Rule Setup Submenu Choices: Rule Setup Displays the status of rules and lets you ad d new rules or modify an existing rule. Rule 1-12 Displays the status of a rule on the ...

  • Bosch Appliances MIC612 - page 49

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 49 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Input Toggles through a list of valid inputs set in the Alarm I/O Setup > Inputs Setup Menu that define the rule's inputs. A rule can have up to four (4) inputs. Inputs which were s ...

  • Bosch Appliances MIC612 - page 50

    50 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 6.9 Diagnostics Menu The Diagnostics menu contains a list of diagnostic tools and events. Most of these menu items are display items only; you canno t select different values to change. Alar ...

  • Bosch Appliances MIC612 - page 51

    MIC612 Thermal Camera On-Screen Displa y (OSD) Menus (Bosch Pr ot ocol) | en 51 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Internal Humidity Displays the percentage of humidity inside th e camera housing. Humidity Events Displays the number of times that the threshol d of the humidity inside the camera housing ...

  • Bosch Appliances MIC612 - page 52

    52 en | On-Screen Display (OSD) Menus (Bosch Pr ot ocol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. Total Time On Displays the total time th at the video has been on. Alarm Status Submenu This menu displays the status of the alarm inputs and outputs. The Alarm Status submenu appears differ ...

  • Bosch Appliances MIC612 - page 53

    MIC612 Thermal Camera On-Screen Di splay (OSD) Menus (P elco Prot ocol) | en 53 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 7 On-Screen Displa y (OSD) Menus (Pelco Pro tocol) This chapter identifies and describes each OSD me nu option, as well as the default setting for each option, for Pelco protocol. For step- ...

  • Bosch Appliances MIC612 - page 54

    54 en | On-Screen Display (OSD) Menus (P elco Prot oc ol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 7.1 Bosch Menu The Bosch Menu allows full access to th e MIC612 main Setup Menu and all MIC612 configuration settings. Refer to Section 6 On-Screen Disp lay (O SD) Menus (Bosch Protocol) , ...

  • Bosch Appliances MIC612 - page 55

    MIC612 Thermal Camera On-Screen Di splay (OSD) Menus (P elco Prot ocol) | en 55 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Camera Setup Men u Choices: 7.3 PTZ Se tup The Pelco PTZ Setup Menu provides access to the PTZ setti ngs such as tours, scan speed, presets, limit stops, recording, and AutoPivot. Menu Desc ...

  • Bosch Appliances MIC612 - page 56

    56 en | On-Screen Display (OSD) Menus (P elco Prot oc ol) MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. PTZ Setup Menu Choices: 7.4 Other Menus Menu Description Sub-menu / Description Default Setting Exit Exits the menu.? Edit Tour 1 Accesses the Add / Rem ove Scenes On Standard Tour 1 Menu . ...

  • Bosch Appliances MIC612 - page 57

    MIC612 Thermal Camera Operation of the Thermal Camera | en 57 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 8 Operation of the Ther mal Camera 8.1 Switching Video To switch Video Channel 2 between the optica l (visible) camera and the thermal camera, enter the Thermal Camera Setup menu of the OS D, select the opti ...

  • Bosch Appliances MIC612 - page 58

    58 en | Operation of the Thermal Camera MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 8.4 T riggering Alarms On De tect ion of Objects Outside of Set Thermal T emper ature Thre shold On models with the 35 mm ther mal lens, you can set a High Temp Thermal Meter or Low Temp Thermal Meter in ord ...

  • Bosch Appliances MIC612 - page 59

    MIC612 Thermal Camera Common User Commands | en 59 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 9 Common User Commands This chapter details common user commands. See Section A Keyboard Commands By Number, page 67 , for a complete list of commands. 9.1 Se t ting AutoPan Mode AutoPan mode pans the MIC612 camera 360 ...

  • Bosch Appliances MIC612 - page 60

    60 en | Common User Command s MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. To clear a character fro m a title: 1. Use the joystick to highlight the Clear OR Position Character prompt. 2. Move the joystick left or righ t until the cursor is below the title character that you need to clear. 3. ...

  • Bosch Appliances MIC612 - page 61

    MIC612 Thermal Camera Common User Commands | en 61 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 9.6 Recording T ours The MIC612 can make up to two (2) record ed tours. A Recorded Tour saves all manual camera movements made during th e recording, including its rate of pan, tilt and zoom speeds and other lens setti ...

  • Bosch Appliances MIC612 - page 62

    62 en | Adva nced Featu res MI C612 Therma l Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 10 Advanced F eature s This chapter details advanced user commands, which are more complicated than those in Section 9 Common User Commands, page 59 . 10.1 Alarm Rules The MIC612 features a powerful alarm rule engine. ...

  • Bosch Appliances MIC612 - page 63

    MIC612 Thermal Camera Advan ced Features | en 63 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Example 2: Advanced Alarm Rule Scenario: A MIC612 located at an airport is se t to AutoPan Between Limits from the parking garage to the airport terminal. The gate enteri ng the airport has an alarm contact connected to ...

  • Bosch Appliances MIC612 - page 64

    64 en | Adva nced Featu res MI C612 Therma l Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 10.3 Image St abilization Image Stabilization becomes increasingly im portant as zoom ranges are extended. The advanced image stabilization algorithms of the MIC612 eliminate camera sh ake for exceptional image clarit ...

  • Bosch Appliances MIC612 - page 65

    MIC612 Thermal Camera Advan ced Features | en 65 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 10.5.2 Displaying Azimuth, Elev ation, and Compass Headings You can display only the azimuth/elevation readings or only the compass reading, or you can display both readings at the same time. The MI C612 displays the azi ...

  • Bosch Appliances MIC612 - page 66

    66 en | Maintenance and T roubleshoo ting MIC612 Therma l Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 11 Maintenance and T rouble shooting The unit contains no user-serviceable parts. Maintenance and repair of this equipment shall only be carried out by suitably trained personne l in accordance with the a ...

  • Bosch Appliances MIC612 - page 67

    MIC612 Thermal Camera | en 67 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 A K eyboard Commands By Number A .1 K eyboard Commands (Bosch Pr ot ocol) A.1.1 Commands, Optica l Camera Locked Function Key Command No. Command Description On/Off 1 Scan 360° / Auto Pan (Continuous) Activates/deactivates Autopan without ...

  • Bosch Appliances MIC612 - page 68

    68 en | MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. On 62 Pre-position (Scene) Title me nu Enters the P re-position Title menu. Refer to Section 9.3 Specifying a Sh ot or a Sector Title, page 59 . * On 63 Zone/Sector Title Menu Enters the Zone Title menu. Refer to Section 9.3 Specifying a S ...

  • Bosch Appliances MIC612 - page 69

    MIC612 Thermal Camera | en 69 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 A.1.2 Commands, Thermal Camera On 99 Factory P/T Home Position Re calibrates home position; can be used as an Alarm Output. On/Off 100 Re cord A Activates/ deactivates recording A. On/Off 101 Re cord B Activates/ deactivates recording B. O ...

  • Bosch Appliances MIC612 - page 70

    70 en | MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. On/Off 81 Alarm Output 1 Open Collector On–Activates output. Off–Deactivates output. On/Off 82 Alarm Output 2 Open Collector On–Activates output. Off–Deactivates output. On/Off 83 Alarm Output 3 Open Collector On–Activates output ...

  • Bosch Appliances MIC612 - page 71

    MIC612 Thermal Camera | en 71 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 A .2 K eyboard Commands (P elco Protocol) Set/Shot 102 Autopan Right Limit Set–Programs right limit. Shot–Shows limit. Set/Shot 103 Lock Commands Locks commands. Set/Shot 104 Unlock Commands Unlocks commands. Set/Shot 106 Pre-wash posi ...

  • Bosch Appliances MIC612 - page 72

    72 en | MIC612 Thermal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. 2 - Pattern Press and hold (2 seconds) Initiate Recording B. Press ACK to end recording. Press Initiate Recording B continuous playback 3 - Pattern Press Initiate the Au toDome standard preset tour (Tour 1) 4 - Pattern Press Initiate the A ...

  • Bosch Appliances MIC612 - page 73

    MIC612 Thermal Camera Index | en 73 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 Inde x Symbols #-ENTER 35 Numerics 33-PRESET 33 34-PRESET 33 81-PRESET 33 82-PRESET 33 92-PRESET 33 93-PRESET 33 94-PRESET 33 95-PRESET 33 , 53 96-PRESET 33 97-PRESET 33 99-PRESET 33 A ack 53 , 56 acknowledge 53 acknowledge alarm 56 ...

  • Bosch Appliances MIC612 - page 74

    74 en | Index MIC612 Ther mal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. commands #-ENTER 35 33-PRESET 33 34-PRESET 33 81-PRESET 33 82-PRESET 33 92-PRESET 33 93-PRESET 33 94-PRESET 33 95-PRESET 33 , 53 96-PRESET 33 97-PRESET 33 99-PRESET 33 autopan 59 AutoScan 33 Aux Off 32 Aux On 32 clear 59 FastAddress ...

  • Bosch Appliances MIC612 - page 75

    MIC612 Thermal Camera Index | en 75 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 H high temperature events 50 threshold 50 I image stabilization 64 inactivity 42 accessing 60 mode 60 operation 60 period 42 Inactivity Mode menu 60 indoor white balance 38 input commands 46 inputs (1-7) 46 inputs (8-12) 46 inputs se ...

  • Bosch Appliances MIC612 - page 76

    76 en | Index MIC612 Ther mal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. Pelco 34 Bosch 54 Command Lock 53 FastAddress 35 keyboard commands 32 menus 34 night mode 55 PRESET command 32 PTZ Setup menu 53 random scan 33 Setup menu 33 software version 53 , 56 white balance 55 Pelco keyboard command s 33-PRES ...

  • Bosch Appliances MIC612 - page 77

    MIC612 Thermal Camera Index | en 77 Bosch Security Systems, Inc. Installa tion Manual F .01U.249.416 | 2.0 | 2012.09 follows 49 input 49 OSD 49 output 49 Shot 49 transmit 49 input Shot 49 rule (1-12) 48 Rule Setup menu 48 rules 48 S scan speed 56 scene 1 42 sector blanking 44 security access 51 level 36 SensUp 39 Set 32 Set command 59 Set Shot 32 S ...

  • Bosch Appliances MIC612 - page 78

    78 en | Index MIC612 Ther mal Camera F .01U.249.416 | 2 .0 | 2012.09 Installation Manual Bosch Security Systems, Inc. ...

  • Bosch Appliances MIC612 - page 79

    ...

  • Bosch Appliances MIC612 - page 80

    Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2011 ...

Manufacturer Bosch Appliances Category Home Security System

Documents that we receive from a manufacturer of a Bosch Appliances MIC612 can be divided into several groups. They are, among others:
- Bosch Appliances technical drawings
- MIC612 manuals
- Bosch Appliances product data sheets
- information booklets
- or energy labels Bosch Appliances MIC612
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bosch Appliances MIC612.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bosch Appliances MIC612, service manual, brief instructions and user manuals Bosch Appliances MIC612. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bosch Appliances MIC612.

A complete manual for the device Bosch Appliances MIC612, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bosch Appliances MIC612 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bosch Appliances MIC612.

A complete Bosch Appliances manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bosch Appliances MIC612 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bosch Appliances MIC612, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bosch Appliances MIC612, that we can find in the current document
3. Tips how to use the basic functions of the device Bosch Appliances MIC612 - which should help us in our first steps of using Bosch Appliances MIC612
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bosch Appliances MIC612
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bosch Appliances MIC612 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bosch Appliances MIC612?

Use the form below

If you did not solve your problem by using a manual Bosch Appliances MIC612, ask a question using the form below. If a user had a similar problem with Bosch Appliances MIC612 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)