English dropdown-ico

Manual Polycom 1725-36082-001

37 pages 0.58 mb
Download

Go to site of 37

Summary
  • Polycom 1725-36082-001 - page 1

    June 2008 Edition 1725-36082-001 Version G VIEW Certified Configuration Guide Nortel WLAN Security Switch 2300 Series with AP-2330 ...

  • Polycom 1725-36082-001 - page 2

    Configuration Guide PN: 1725-36082-001_G.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the propert y of their respective owners. Patent Info ...

  • Polycom 1725-36082-001 - page 3

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and wireless LAN (WLAN) infrastructure products. The products listed ...

  • Polycom 1725-36082-001 - page 4

    Configuration Guide PN: 1725-36082-001_G.doc 4 Contacting Nortel Technical Support If you purchased a service contract for your Nortel product from a distributor or authorized reseller, contact the technical support staff for that distributor or reseller for assistance. Additional information about the No rtel Technical Solutions Centers is availab ...

  • Polycom 1725-36082-001 - page 5

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 5 Network Topology The following topology was tested during VIEW Certification. It is important to note that these do not necessarily represent all “Certified” configurations. Both Layer-2 and Layer-3 roaming were tested. Layer-3 roaming of SpectraLink Wireless Telep ...

  • Polycom 1725-36082-001 - page 6

    Configuration Guide PN: 1725-36082-001_G.doc 6 Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper. This document covers the security, coverage, capacity and QoS considerations necessary for ensuring excellent voice quality with enterprise Wi-Fi networks. For more detailed informa ...

  • Polycom 1725-36082-001 - page 7

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 7 Configuring a New WLAN Security Switch Starting from Factory Defaults 1. Using the supplied DB-9 male to DB-9 female standard RS-232 cable, connect the WLAN Security Switch to the serial port of a terminal or PC. 2. Run a terminal emulation program (such as HyperTermin ...

  • Polycom 1725-36082-001 - page 8

    Configuration Guide PN: 1725-36082-001_G.doc 8 Connecting APs To configure the WLAN Security Sw itch (WSS) to support an AP, you must first determine how the AP will connect to the switch. There are two types of AP-to-WSS connection: direct and distributed. Directly connected APs In direct connection, an AP connects to one or two 10/100 ports on a ...

  • Polycom 1725-36082-001 - page 9

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 9 Command, comment, and screen text key In the sections below you will find commands, comments and system responses or other screen-displayed information involved in the configuration process. This key expl ains the text styles an d symbols used to denote them. Text Styl ...

  • Polycom 1725-36082-001 - page 10

    Configuration Guide PN: 1725-36082-001_G.doc 10 Configuration Example – CLI AP configuration To add a directly connected AP-2330 attached to port 1 on a WSS using CLI: set port ty pe ap 1 mo del 2330 poe enable # Defines t he port nu mber on the switch tha t the AP is connecte d to, the model number of the AP and enables PoE on the sw itch port. ...

  • Polycom 1725-36082-001 - page 11

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 11 Service profile / SSID configuration To create a SSID named Voice using WPA-PSK that will be advertised on 802.11a/b/g radios using CLI: set service -profile V oice ssid-na me Voice # Creates a new servi ce profile a nd SSID na med Voice. Note it’s a best prac tice ...

  • Polycom 1725-36082-001 - page 12

    Configuration Guide PN: 1725-36082-001_G.doc 12 # Enables p re-shared- key authenti cation. set service -profile V oice auth-do t1x disabl e # Disables 802. 1x authentica tion. set service -profile V oice attr vl an-name Vo ice # Specifies the VLAN name to map the voice handsets traffic to. Radio Profile configuration The default Radio Profile need ...

  • Polycom 1725-36082-001 - page 13

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 13 set security ac l map SpectraLin k vlan Voice in set security ac l map SpectraLin k vlan Voice out # Applies t he ACL to the Voice VL AN for ing ress and egress traf fic. To create an ACL that allows and prioritizes IP protocol 119 (SVP) with a Class of Service (CoS) ...

  • Polycom 1725-36082-001 - page 14

    Configuration Guide PN: 1725-36082-001_G.doc 14 Configuration Example – WLAN Management Software Adding a WLAN Security Switch to the Network Plan Before WLAN Management Software can be used to configure a WLAN Security Switch, the WSS must be added to the WMS server. To add a WLAN Security Switch to WLAN Management Software: 1. Assuming that WMS ...

  • Polycom 1725-36082-001 - page 15

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 15 4. In the IP Address field, type the IP address for the WLAN Security Switch. 5. In the Enable Password field, type the enable password for the WLAN Security Switch. The enable password must match the enable password that was defined in the Quick Start Wizard. For mor ...

  • Polycom 1725-36082-001 - page 16

    Configuration Guide PN: 1725-36082-001_G.doc 16 5. For directly connected APs, select an available port on the switch from the Available Ports drop-down list. Click the Ne xt button. 6. For distributed APs, enter the Name and Serial Number of the AP. Click the Next button. ...

  • Polycom 1725-36082-001 - page 17

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 1 7 7. Specify the model of the Nortel AP you are configuring. Valid models include 2330, 2330A and 2330B . Click the Next button. 8. To configure the 802.11g Radio : a. Select default for the Radio Profile . b. Specify the Channel Number and Transmit Power the radio sho ...

  • Polycom 1725-36082-001 - page 18

    Configuration Guide PN: 1725-36082-001_G.doc 18 9. To configure the 802.11a Radio , a. Select default for the Radio Profile . b. Specify the Channel Number and Transmit Power the radio should use, as determined by the site survey performed on the facility. 10. Click the Finish button. 11. The AP has now been added to the WLAN Security Switch. ...

  • Polycom 1725-36082-001 - page 19

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 19 VLAN configuration For security and flexibility it is recommended that voice and data be on separate VLANs. For this example, a new VLAN named Voice with a VLAN ID 2 will be created and tagged to the uplink port 8 . 1. In WMS click Configuration on the tool bar. 2. In ...

  • Polycom 1725-36082-001 - page 20

    Configuration Guide PN: 1725-36082-001_G.doc 20 4. For VLAN Name enter Voice . 5. For VLAN ID specify 2 . Click the Next button. 6. In the Port/Port Group list, select the 802.1Q tagged uplink port (P08) and click the Add button. 7. Click the Tag check box and specify the 802.1Q t ag value 2 . 8. Click the Finish button. ...

  • Polycom 1725-36082-001 - page 21

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 21 9. The Voice VLAN 2 is now 802.1Q tagged to the uplink port P08. a. Highlight the Voice VLAN. b. In the Network Plan Tasks panel, select IGMP. 10. In the VLAN Properties window, disab le IGMP by clearing the Enabled check box. Click the OK button. ...

  • Polycom 1725-36082-001 - page 22

    Configuration Guide PN: 1725-36082-001_G.doc 22 Service Profile / SSID configuration To create a SSID named Voice using WPA-PSK or WPA2-PSK that will be advertised on 802.11a/b/g radios using WMS: 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel expand the WSS and select Wireless Services . 3. In the Network Plan Tasks panel ...

  • Polycom 1725-36082-001 - page 23

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 23 4. In the New Voice Service Profile introduction screen click the Next button. 5. Specify a Name and SSID for the Voice Service Profile. 6. Set the SSID Type to Encrypted and use the default Vend or type SpectraLink . Click the Next button. Selecting the vendor Spectr ...

  • Polycom 1725-36082-001 - page 24

    Configuration Guide PN: 1725-36082-001_G.doc 24 7. Select the Open Access check box. Click the Next bu tton. MAC authentication may optionally be selected but will require that the MAC addresses for each handset be defined in the local AAA database on the WSS. 8. Settings for Wireless Security : a. To support handsets using WPA-PSK security, select ...

  • Polycom 1725-36082-001 - page 25

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 25 b. To support handsets using WPA2-PSK, select the RSN (WPA2) check box. 9. Click the Next button. 10. Settings for Wireless Encryption Cipher Suite : a. To support handsets using WPA-PSK with TKIP, select the TKIP check box. ...

  • Polycom 1725-36082-001 - page 26

    Configuration Guide PN: 1725-36082-001_G.doc 26 b. To support handsets using WPA2-PSK with AES/CCMP, select the AES (CCMP) check box and click the Next button. 11. Enter a hexadecimal pre-shared key or passphrase. a. If a passphrase is entered, click the Generate button to generate the hexadecimal pre-shared key. The pre-shared key must match on bo ...

  • Polycom 1725-36082-001 - page 27

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 2 7 12. Click the Next button. 13. Specify the VLAN named Voice . This determines the VLAN that the WSS will map the handset traffic to. 14. Click the Next button. 15. A default ACL will be generated which will allow and prioritize IP protocol 119 ( SVP ) traffic with th ...

  • Polycom 1725-36082-001 - page 28

    Configuration Guide PN: 1725-36082-001_G.doc 28 a. (Optional) Modify the default ACL by removing the last statement, which will allow and prioritize IP protocol 119 (SVP) but deny all other IP traffic on the Voice VLAN. 16. Click the Next button. ...

  • Polycom 1725-36082-001 - page 29

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 29 17. Assign the Voice Service Profile to the default Radio Profile. This will determine which 802.1 1a and 802.11g radios will advertise the Voice SSID. For this example the default Radio Profile will be used which is assigned to all 802. 11a/g radios. This will provid ...

  • Polycom 1725-36082-001 - page 30

    Configuration Guide PN: 1725-36082-001_G.doc 30 Radio Profile configuration The default Radio Profile needs to be modified to disable certain features to support the handsets. To modify the default Radio Profile using WMS: 1. In WMS click Configuration on the tool bar. 2. In the Organizer panel expand the WSS and select Radio Profiles. 3. In the Ra ...

  • Polycom 1725-36082-001 - page 31

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 31 4. In the Radio Profile Properties window, click the Radio Profile tab. 5. Clear the Enable Active Scan check box. This disables active scanning, which prevents the ra dios from going off-channel and disrupting voice services. 6. Click the Auto Tune tab. 7. Clear the ...

  • Polycom 1725-36082-001 - page 32

    Configuration Guide PN: 1725-36082-001_G.doc 32 8. Click the Voice Configuration tab. Verify that the QoS Mode is set to SVP . WMM support is not currently available on the SpectraLink Wireless Telephones. 9. Click the OK button. ...

  • Polycom 1725-36082-001 - page 33

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 33 Deploying changes Deploying the changes in WMS will upload and save the configuration to the WSS. To deploy the changes in WMS: 1. In WMS click Devices on the tool bar. 2. In the Local Changes Task List panel, select Deploy to upload and save the configuration changes ...

  • Polycom 1725-36082-001 - page 34

    Configuration Guide PN: 1725-36082-001_G.doc 34 3. When the Deploy option is selected, WMS will send, apply and save the configuration changes to the WSS. ...

  • Polycom 1725-36082-001 - page 35

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 35 Example Configuration Files (For Reference Only) The following configuration file provides an example configuration to support SpectraLink Wireless Telephones using WPA-PSK: # Configura tion nvgen 'd at 2007-7 -26 22:51: 55 # Image 5.0 .11.4.0 # Model 2360 # Last ...

  • Polycom 1725-36082-001 - page 36

    Configuration Guide PN: 1725-36082-001_G.doc 36 set vlan 2 name Voice set vlan 2 port 8 tag 2 set igmp di sable vlan Voice set interfa ce 1 ip 19 2.168.1.50 2 55.255.255 .0 set securit y acl ip S pectraLink p ermit cos 7 119 0.0.0. 0 255.255.255 .255 0.0.0 .0 255.255.2 55.255 set securit y acl ip S pectraLink p ermit 0.0. 0.0 255.255.255 .255 commi ...

  • Polycom 1725-36082-001 - page 37

    Nortel: WLAN Security Switch 2300 Series with AP-2330 PN: 1725-36082-001_G.doc 3 7 set dap 1 r adio 2 cha nnel 40 tx-p ower 10 mo de enable set port ty pe ap 1 mo del 2330 poe enable set ap 1 na me WAP-233 0-1 set ap 1 ra dio 1 tx-p ower 10 mode enable set ap 1 ra dio 2 chan nel 44 tx-po wer 10 mod e enable set ip https server en able set port po e ...

Manufacturer Polycom Category Switch

Documents that we receive from a manufacturer of a Polycom 1725-36082-001 can be divided into several groups. They are, among others:
- Polycom technical drawings
- 1725-36082-001 manuals
- Polycom product data sheets
- information booklets
- or energy labels Polycom 1725-36082-001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Polycom 1725-36082-001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Polycom 1725-36082-001, service manual, brief instructions and user manuals Polycom 1725-36082-001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Polycom 1725-36082-001.

Similar manuals

A complete manual for the device Polycom 1725-36082-001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Polycom 1725-36082-001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Polycom 1725-36082-001.

A complete Polycom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Polycom 1725-36082-001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Polycom 1725-36082-001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Polycom 1725-36082-001, that we can find in the current document
3. Tips how to use the basic functions of the device Polycom 1725-36082-001 - which should help us in our first steps of using Polycom 1725-36082-001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Polycom 1725-36082-001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Polycom 1725-36082-001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Polycom 1725-36082-001?

Use the form below

If you did not solve your problem by using a manual Polycom 1725-36082-001, ask a question using the form below. If a user had a similar problem with Polycom 1725-36082-001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)