Manual Pelco 2 C2485M-A (1/05)

8 pages 0.39 mb
Download

Go to site of 8

Summary
  • Pelco 2 C2485M-A (1/05) - page 1

    ® INST ALLA TION MANUAL Pressurized Spectra III ™ Series Fiber Optic Models C2485M-A (1/05) ...

  • Pelco 2 C2485M-A (1/05) - page 2

    2 C2485M-A (1/05) ...

  • Pelco 2 C2485M-A (1/05) - page 3

    C2485M-A (1/05) 3 W elcome Thank you for purchasing Pelco’ s Pressurized Spectra III ™ Series dome system with feedthrough for fiber optic modules with an ST -type connector . Y our new system provides ultimate protection of the camera optics and electronics from moisture, corrosive gases, and airborne contaminants. This manual is designed to ...

  • Pelco 2 C2485M-A (1/05) - page 4

    4 C2485M-A (1/05) Preinstallation 1 Install the fiber optic module: Open the hinged door to the back box by pushing the tab lock towards the wall of the unit and lifting the door open. Remove the plug from the 16-pin connector . Install the module in the 16-pin connector . Secure the module to the circuit board standoff using the screw and lock wa ...

  • Pelco 2 C2485M-A (1/05) - page 5

    C2485M-A (1/05) 5 5 Install the dome drive: a. Set the DIP switches located on the side of the dome drive. Refer to the labels located on the top of the dome drive or to the Quick Start Guide shipped with the dome drive. b. Line up the blue (A) and red (B) tabs with the blue (A) and red (B) labels. c. Push in on the tabs. Insert one side and then t ...

  • Pelco 2 C2485M-A (1/05) - page 6

    6 C2485M-A (1/05) Site Installation 1 Feed a fiber optic cable (not supplied) and the supplied wiring harness into the front of the mount and out the back of the mount. Connect the wires as required. Refer to T ables A, B, and C for cable and wiring information. Fasten the mount to the mounting surface. Refer to the instructions sup- plied with th ...

  • Pelco 2 C2485M-A (1/05) - page 7

    C2485M-A (1/05) 7 NOTE: These are the recommended maximum distances for 24 V AC appli- cations and are calculated with a 10 percent voltage drop. (T en percent is generally the maximum allowable voltage drop for AC-powered devices.) NOTE: Input power for the dome is 24 V AC only . Power consumption is 75 V A per dome. Use a 24 V AC transformer with ...

  • Pelco 2 C2485M-A (1/05) - page 8

    World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East ...

Manufacturer Pelco Category Door

Documents that we receive from a manufacturer of a Pelco 2 C2485M-A (1/05) can be divided into several groups. They are, among others:
- Pelco technical drawings
- 2 C2485M-A (1/05) manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco 2 C2485M-A (1/05)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco 2 C2485M-A (1/05).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco 2 C2485M-A (1/05), service manual, brief instructions and user manuals Pelco 2 C2485M-A (1/05). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco 2 C2485M-A (1/05).

Similar manuals

A complete manual for the device Pelco 2 C2485M-A (1/05), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco 2 C2485M-A (1/05) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco 2 C2485M-A (1/05).

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco 2 C2485M-A (1/05) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco 2 C2485M-A (1/05), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco 2 C2485M-A (1/05), that we can find in the current document
3. Tips how to use the basic functions of the device Pelco 2 C2485M-A (1/05) - which should help us in our first steps of using Pelco 2 C2485M-A (1/05)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco 2 C2485M-A (1/05)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco 2 C2485M-A (1/05) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco 2 C2485M-A (1/05)?

Use the form below

If you did not solve your problem by using a manual Pelco 2 C2485M-A (1/05), ask a question using the form below. If a user had a similar problem with Pelco 2 C2485M-A (1/05) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)