English dropdown-ico

Manual Harbor Freight Tools 93762

29 pages 3.62 mb
Download

Go to site of 29

Summary
  • Harbor Freight Tools 93762 - page 1

    HORIZONT AL/VERTICAL MET AL CUTTING BANDSA W Model 93762 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2006 by Harbor Freight T ools ® . All rights reserved. No portion of this manua ...

  • Harbor Freight Tools 93762 - page 2

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 2 CONTENTS IMPORT ANT SAFETY INFORMA TION ........................... 3 GENERAL T OOL SAFETY W ARNINGS ..................................... 3 BAND SA W SAFETY W ARNINGS .... 5 VIBRA TION SAFETY ................... 7 GROUNDING INSTRUCTIONS .... 7 GROUNDED TOOLS: T OOLS WITH THREE P ...

  • Harbor Freight Tools 93762 - page 3

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 3 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc ...

  • Harbor Freight Tools 93762 - page 4

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 4 DON’T FORCE TOOL. It will do the 7. job better and safer at the rate for which it was designed. USE RIGHT TOOL. Don’t force tool 8. or attachment to do a job for which it was not designed. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS (120 VOL T) NAMEPLA TE AMPERES (at f ...

  • Harbor Freight Tools 93762 - page 5

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 5 or other part that is damaged should be properly repaired or replaced. DIRECTION OF FEED. Feed work 20. into a blade or cutter against the direction of rotation of the blade or cutter only . NEVER LEA VE T OOL RUNNING 21. UNA TTENDED. TURN POWER OFF . Don’t leave tool until it ...

  • Harbor Freight Tools 93762 - page 6

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 6 Keep all safety guards in place and in 19. proper working order . Use indoors only . 20. If the teeth of the Saw Blade are so 21. far apart that they straddle the work- piece, severe damage to the work- piece and/or Saw Blade will result. The use of accessories or attach- 22. men ...

  • Harbor Freight Tools 93762 - page 7

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 7 ditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator . Vibration Safety This tool vibrates during use. Re- peated or long-term exposure ...

  • Harbor Freight Tools 93762 - page 8

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 8 Improper connection of the equip- 3. ment-grounding conductor can re- sult in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equip- ment-grounding conductor . If repair or replacement of the elec ...

  • Harbor Freight Tools 93762 - page 9

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 9 SPECIFICA TIONS Motor 120 V~ / 60 Hz / 1 HP / n 0 1700/min Cutting Capacity 4-1/2” Round Stock / 4” x 6” Rectangular Stock Speeds 80 FPM / 120 FPM / 200 FPM Throat Depth 4-1/2” Angle Cutting Capacity 0° ~ 55° (Left) Miter Plate on Horizontal Cutting Bed Blade 64” L x ...

  • Harbor Freight Tools 93762 - page 10

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 10 T o Attach The Bandsaw T o The Stand: ST AND (TOP VIEW) MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE SCREW (59) SPRING W ASHER (58) FLA T W ASHER (57) FIGURE B 1. With additional manpower , and an adequate lifting device, carefully set the ...

  • Harbor Freight Tools 93762 - page 11

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 1 1 T o Attach The Pulley Cover: PULLEY COVER (72) WORM SHAFT (9) MOTOR SHAFT (81) BODY FRAME (60) HEX BOL T (76) FLA T WASHER (77) FIGURE D Position the Pulley Cover (72) over the Worm Shaft (9) and Motor Shaft (81). Align the mounting hole in the Pulley Cover with the mounting ho ...

  • Harbor Freight Tools 93762 - page 12

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 12 MA TERIAL SPEED (FPM) PULLEY GROOVE SPINDLE MOTOR T ool Steel, Stainless Alloy Steels, Bearing Bronze 80 Large Small Medium to High Carbon Steels, Hard Brass or Bronze 120 Medium Medium Low to Medium Carbon Steels, Soft Brass, Aluminum, Plastic 200 Small Large Refer to the Chart ...

  • Harbor Freight Tools 93762 - page 13

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 13 SCREW (190) SMALL VERTICAL CUTTING PLA TE (194) FIGURE I SCREW (190) VERTICAL CUTTING PLA TE (189) 2. Remove the two Screws (190), and remove the Small V ertical Cutting Plate (194). (See Figure I.) Guide the Saw Blade (82) through 3. the slot in the V ertical Cutting Plate (189 ...

  • Harbor Freight Tools 93762 - page 14

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 14 OPERA TING INSTRUCTIONS CAUTION! T urn the Power Switch (164) to its “OFF” position and un- plug the tool from its electrical outlet prior to making adjustments to the tool. T o Use The Vise: Raise the Body Frame (60) to its 1. vertical position, and lock the Body Frame in p ...

  • Harbor Freight Tools 93762 - page 15

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 15 Adjustments T o Adjust The Stock Stop: SHAFT (158) SOCKET HEAD SCREW (156) STOCK STOP (157) WORKPIECE (NOT INCLUDED) FIGURE M 1. Loosen the Socket Head Screw (156) that holds the Stock Stop (157) to the Shaft (158). (See Figure M.) Adjust the Stock Stop (157) to the 2. desired l ...

  • Harbor Freight Tools 93762 - page 16

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 16 ing the Locking Pin (153). (See Figure H.) T urn on the Bandsaw . The Saw 2. Blade (82) is tracking properly when the back of the Blade is just touch- ing the edge of the Blade Wheel (37) ange. The back of the Blade should not be rubbing against the ange. (See Figure P .) ...

  • Harbor Freight Tools 93762 - page 17

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 17 When the Bandsaw is not in use over 2. long periods of time, release the ten- sion on the Saw Blade (82). Adjusting The Feed Rate: FIGURE Q HANDLE (127) The feed rate of the Body Frame (60) can be adjusted by turning the Han- dle (127) clockwise to decrease the feed rate or coun ...

  • Harbor Freight Tools 93762 - page 18

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 18 Basic Bandsaw Operation -- V ertical Position: 1. W ARNING! Always wear ANSI- approved safety impact eye goggles when operating the Bandsaw . Do not plug the Power Cord Plug 2. into an electrical outlet until all necessary adjustments (as previ- ously discussed in this manual) h ...

  • Harbor Freight Tools 93762 - page 19

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 19 from its electrical outlet. (See Figure S.) W ait until the Saw Blade (82) comes 15. to a complete stop. Then, remove the workpiece and scrap material from the V ertical Cutting Plate (189). (See Figure S.) Remove the Locking Pin (153) and 16. turn the Support Plate (150) to the ...

  • Harbor Freight Tools 93762 - page 20

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 20 Blade into the workpiece. (See Fig- ure T .) 10. W ARNING! Keep hands and ngers safely away from the cut - ting area. Slowly lower the Body Frame (60), 1 1. while it gradually feeds the Saw Blade (82) into the workpiece. Do not force the Bandsaw to remove mate- rial faster th ...

  • Harbor Freight Tools 93762 - page 21

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 21 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the Power Switch (164) is in its “OFF” position and the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. Before each use, 2. inspect the general co ...

  • Harbor Freight Tools 93762 - page 22

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 22 Place the new Saw Blade (82) be- e. tween each of the Guide assemblies and around the Upper Blade Wheel (37) and Lower Blade Wheel (54). IMPORT ANT : The teeth must be pointing downward toward the Motor . (See Figure U.) NOTE: f. The Bandsaw is equipped with a 64” diameter , . ...

  • Harbor Freight Tools 93762 - page 23

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 23 T o lubricate the Worm Gear and 5. Worm Shaft: The W orm Gear (17) and Gear Shaft (19) run in an oil bath Gear Box and should not require an oil change more than once a year , unless the oil becomes contaminated or a leak occurs due to improper replacement of the Gear Box Cover ...

  • Harbor Freight Tools 93762 - page 24

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 24 TROUBLESHOOTING ...

  • Harbor Freight Tools 93762 - page 25

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 25 P ARTS LIST Part # Description Qty 1 Spindle Pulley 1 2 Socket Head Screw(M8x8) 1 3 Screw(M4x8) 1 4 Flat W asher(4) 1 5 Flat W asher(5) 1 6 Screw(M4x8) 2 7 Seal Cover 1 8 Oil Seal(B15x35x7) 1 9 Bearing(6202Z) 1 10 Spacer 1 11 Bearing(6202Z) 1 12 Worm 1 13 V -Belt 1 14 Hex Bolt(M ...

  • Harbor Freight Tools 93762 - page 26

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 26 P ARTS LIST (CONT .) Part # Description Qty 80 Motor Pulley 1 81 Key(C5x28) 1 82 Motor 1 83 Blade 1 84 Blade Guide Bracket Seat 1 85 Flat W asher(16) 1 86 Spring W asher(8) 1 87 Hex Bolt(M8x30) 1 88 Nut 2 89 Spring W asher(8) 2 90 Bearing(180029) 1 91 Pin 1 92 Balde Guide Bracke ...

  • Harbor Freight Tools 93762 - page 27

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 27 Part # Description Qty 163 Shaft 1 164 Cable Protector 1 165 Switch Panel 1 165-1 Switch Box 1 166 Screw(M3.9x30) 2 167 Pull Relief 2 168 Power Cord 1 168-1 Serrated W asher(5) 2 168-2 Bolt 2 168-3 T erminal 2 168-4 Rubber 4 168-5 Metal Plate 4 169 Power Switch 1 170 Angle Scale ...

  • Harbor Freight Tools 93762 - page 28

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 28 ASSEMBL Y DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. 194: V ertical Cutting Plate Support Not Shown. REV 09f ...

  • Harbor Freight Tools 93762 - page 29

    SKU 93762 For technical questions, please call 1-800-444-3353. Page 29 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of ninety days from date of purchase that the engine/motor , the belts ...

Manufacturer Harbor Freight Tools Category Water Heater

Documents that we receive from a manufacturer of a Harbor Freight Tools 93762 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 93762 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 93762
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 93762.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 93762, service manual, brief instructions and user manuals Harbor Freight Tools 93762. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 93762.

Similar manuals

A complete manual for the device Harbor Freight Tools 93762, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 93762 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 93762.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 93762 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 93762, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 93762, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 93762 - which should help us in our first steps of using Harbor Freight Tools 93762
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 93762
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 93762 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 93762?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 93762, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 93762 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)