English dropdown-ico

Manual Cisco Systems 2960

108 pages 4.95 mb
Download

Go to site of 108

Summary
  • Cisco Systems 2960 - page 1

    Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Catal yst 2960 S witc h Hardw are Installation Gui de F ebruary 20 08 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRO DUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WIT ...

  • Cisco Systems 2960 - page 2

    THE SOFTWARE LICENSE AND LIMITED WARRA NTY FOR THE ACCOMPANYING PRO DUCT ARE SET FORTH IN THE INFORMATIO N PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCOR PORATED HEREIN BY THIS REFERENCE. IF YOU AR E UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTAC T YOUR CISCO REPRESENTATIVE FOR A COPY . The follow ing in formatio n is f or FC ...

  • Cisco Systems 2960 - page 3

    iii Catalyst 2960 Switch Hard wa re Installation Gui de OL-7075-05 CONTENTS CHAPTER 1 Product Ove rview 1-1 Featur es 1-1 Front Pa nel Des cripti on 1-3 Cata lyst 2 960 S witch 24- and 48-Po rt Swit ches 1-3 Cataly st 2960 -24- S, 2960-24 TC-S, and 2960-48 TC-S Swi tches 1-4 Cata lyst 2 960-2 4PC-L 29 60-24T C-L, 2960 -48TC -L, 296 0 -24LT-L , 2960 ...

  • Cisco Systems 2960 - page 4

    Cont ent s iv Catalyst 2960 Swi tch Hardware In stallation Guid e OL-7075-05 CHAPTER 2 Switch Inst allati on (24- an d 48-Port Swit ches) 2-1 Prepar ing fo r Inst allati on 2-1 Warnings 2-2 Statemen t 371—Powe r Cable and AC Ad apter 2-3 Guidel ines f or Parti culat e Matter 2-4 Insta llati on Gu idel ines 2-5 Verif ying Pa ckage Cont ents 2-6 Ve ...

  • Cisco Systems 2960 - page 5

    Content s v Catalyst 2960 Switch Hard wa re Installation Gui de OL-7075-05 Insta lling the S witch 3-6 Desk- or Sh elf-Moun ting ( witho ut Mount ing Scr ews) 3- 6 Desk- or Shelf-Moun ting (with Mount ing Screws) 3-7 Under the Desk- or Shelf-Mou nting (wi th Mountin g Screws ) 3-9 Wall- Moun ting (wit h M ounti ng S cre ws) 3-12 Magnet Mo unting 3- ...

  • Cisco Systems 2960 - page 6

    Cont ent s vi Catalyst 2960 Swi tch Hardware In stallation Guid e OL-7075-05 Cable an d Adapte r Specifi cation s A-4 SFP Module Cable Sp ecific ation s A-4 Two T wiste d-Pair Cabl e Pino uts A-6 Four Tw isted- Pair Cable Pino uts for 1000BASE-T Ports A-6 Crossov er Cabl e and Adapte r Pino uts A-7 Identi fying a Cr ossov er Cable A-7 Adap ter Pi n ...

  • Cisco Systems 2960 - page 7

    vii Catalyst 2960 Switch Hard wa re Installation Gui de OL-7075-05 Preface Audience This guide is for the netw orking or computer technician responsible for installin g the Catalyst 2960 switch, hereafter kno wn as the switc h. W e assume that yo u are familia r with the concep ts and term inology of Ethernet and loca l area networki ng. If you are ...

  • Cisco Systems 2960 - page 8

    viii Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Preface The safety warnin gs for this product are translated in to sev eral languages in the Re gulatory Compliance and Saf ety Inform ation for the Catalyst 2960 S witch that ships with the product. The EMC re gulatory state ment s are al so inc lude d in that guide . Related Docum ...

  • Cisco Systems 2960 - page 9

    ix Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Pre face • Cisco Redun dant P ower System 2300 Hardwar e Installation G uide (orde r number D OC-7 817647 =) • Cisco RPS 675 Redundan t P ower System Hardwar e Installati on Guide (or der numbe r DOC-78 17647=) These comp atibility m atrix documents ar e a vailable from this C i ...

  • Cisco Systems 2960 - page 10

    x Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Preface ...

  • Cisco Systems 2960 - page 11

    CH A P T E R 1-1 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 1 Product Overview The Ca talys t 2960 sw itch— also r eferre d to a s the switch —is an Ethernet switch to which yo u can connec t devices such as workstations , Cisco W ireless Ac cess Points, Ci sco IP Phones, a nd other network devices includi ng servers, route rs ...

  • Cisco Systems 2960 - page 12

    1-2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Feature s The Catal yst 2960-8 TC-L, Catalyst 2960G-8TC -L, an d Catal yst 2960PD- 8TT - L switche s are sma ller than the othe r Catal yst 2960 switche s. Th ey can be moun ted with a magn et, have securi ty loc k slots, a nd do not have a fan. See Chapte ...

  • Cisco Systems 2960 - page 13

    1-3 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description The Cat alyst 2960-8TC- L and Catal yst 2960 G-8TC-L switc hes do n ot suppor t the 1000BASE-T or GLC-GE-100FX SFP m odules. Some Ca talyst 2960 switch es have a redun dant power syst em (RPS) conne ctor for an o ptional Cisco RPS 23 ...

  • Cisco Systems 2960 - page 14

    1-4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S Switche s The 10/ 100 ports on the C atal yst 2960 -24-S sw itch a re num bere d as fol lows: The first memb er of t he pair (por t 1) is abov e the second me mber (port 2) , p ort ...

  • Cisco Systems 2960 - page 15

    1-5 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description Catalyst 2960-24PC- L 2960-24TC-L, 29 60-48TC- L, 2960 -24LT-L, 2960-24TT-L, and 2960-48TT-L Sw itches The 10/1 00 ports on the Cataly st 2960-24 PC-L, 296 0-24T C-L, 296 0-48TC -L, 296 0-24L T -L, 2960-2 4TT -L, a nd 2960- 48TT -L s ...

  • Cisco Systems 2960 - page 16

    1-6 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion The Catal yst 2960-2 4L T -L , Catalyst 2960 -24TT -L, and Ca talyst 296 0-48TT -L switche s have two 10/100/10 00 uplink ports, numbe red 1 and 2. Ports 1 to 8 on the Cata lyst 2 960-24L T -L sw itch ar e PoE ports. S ee Figure 1 ...

  • Cisco Systems 2960 - page 17

    1-7 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description Figur e 1 -1 0 Catalyst 29 60G-24TC-L Sw itch Fr ont P anel Figur e 1 -1 1 Ca t alyst 29 60G-48TC-L Sw itch F ront P anel Catalyst 2960 Switc h 8-Port S witches These sec tions descr ibe the Cata lyst 2960 8-por t switches : • Cata ...

  • Cisco Systems 2960 - page 18

    1-8 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion Catalyst 2960-8TC-L Catalyst 2960G-8TC -L Switches The consol e ports fo r the Catal yst 2960-8T C-L an d Catalyst 2 960G-8T C-L switch es ( Figure 1-13 and Figure 1-14 ) are on the front pa nels. The s witche s also ha ve a dual- ...

  • Cisco Systems 2960 - page 19

    1-9 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description You can use the mdix auto interface configu ration co mmand i n the c ommand-line interface ( CLI) t o enable the au to-MDIX feature. When the aut o -MDIX featur e is enabled, the switch detects th e required cable ty pe for coppe r ...

  • Cisco Systems 2960 - page 20

    1-10 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion On a per-port b asis, you can contro l whe ther Catalyst 2960 Po E port a utoma tically provides power when you conne ct an IP phone o r an acc ess poin t. The device m anager, Network Assista nt, and t he CLI pr ovide two PoE se ...

  • Cisco Systems 2960 - page 21

    1-11 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description Dual-P urpose Port Y ou can confi gure a dual-purpose port as either a 10 /100/1000 port or as an SFP module port. Only one port can be activ e at a time. If both ports are connected, the SFP module port has priority . Yo u cannot c ...

  • Cisco Systems 2960 - page 22

    1-12 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion Figur e 1 -16 Connecting Through an Exter nal AC P owe r Adapte r LEDs Y ou ca n use t he swit ch LEDs to m onitor sw itch a ctivity and its perf orma nce. Figu re 1-17 shows an d example of the switch LED s and the M ode button ...

  • Cisco Systems 2960 - page 23

    1-13 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description Figur e 1 -1 7 Catalys t 2960 Swi tc h LEDs System LED The Syste m LED shows whether th e system is rec eiving po wer and is func tioning properly . Ta b l e 1-2 lists th e LED colors and th eir meanings. RPS LED The RPS LED sho ws ...

  • Cisco Systems 2960 - page 24

    1-14 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion For more information about the Cisco RPS 2300 or th e Cisco RPS 675, see t he relate d hardware installati on guide for that pow er system. Port LEDs and Modes Each RJ -45 port and SFP mo dule slot ha s a port LE D. These port LE ...

  • Cisco Systems 2960 - page 25

    1-15 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Front Panel Description Ev en if PoE mode is not selec ted, the PoE L E D still sh ows PoE p r oblems wh en the y are detected . Ta b l e 1-6 lists the PoE m ode LED colors an d their mean ings. The PoE L E D applies only to C atalyst 2960 switches that su ...

  • Cisco Systems 2960 - page 26

    1-16 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Front Pane l Descript ion T o select or change a mode, pre ss the Mode b u tton until the de sir ed mode is highlig h ted. When you chan ge port mo des, the meanin gs of the por t LED c olors al so change . Ta b l e 1- 7 ex p lains ho w to interpre t the ...

  • Cisco Systems 2960 - page 27

    1-17 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Rear Pa nel De scri ption Dual-Purpose Port LEDs The LEDs on a du al-purpose port show wh ether an RJ-45 connector is conn ected to the port, or i f an SFP module is i nstalled in the slot. See the e xample in Figure 1- 18 . Y ou can con figure each port a ...

  • Cisco Systems 2960 - page 28

    1-18 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Rear Panel Des cription Figur e 1 -19 Catalyst 2960 S witch Rea r Pan el Power Sup plies All switche s other than the Cata ly st 2960PD-8TT -L are po wered through their i n ternal po wer supply (see “Power Input Port (Catal yst 2960PD -8TT -L Switc h)? ...

  • Cisco Systems 2960 - page 29

    1-19 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Rear Pa nel De scri ption War ni n g Attach only the following Cisco RPS model to the RPS receptacle: PWR-RPS2300, P WR675-AC-RPS-N1=. Stat ement 3 70 For more information about the Cisco RPS 675, see the Cisco R PS 675 Re dundan t P ower S ystem H a rd w ...

  • Cisco Systems 2960 - page 30

    1-20 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Managem ent Opt ions Security Slots The Catal yst 2960-8 TC-L, 2960 G-8TC-L , and 2960 PD-8TT -L swit ches have securit y slots on the lef t and right side panel s. Y ou can in stall an op tional cable lock, such as the type that is used to secure a lapto ...

  • Cisco Systems 2960 - page 31

    1-21 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 1 Product Overv iew Manageme nt Options • Cisco IOS co mmand-line interf ace (CLI) The sw itch CL I is based o n Cisco IOS software a nd is e nhan ced to s upport deskt op-switc hing feat ures. Y ou ca n fully conf igure an d monitor th e switch and s witch cluster memb ers ...

  • Cisco Systems 2960 - page 32

    1-22 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 1 Produc t Overview Managem ent Opt ions ...

  • Cisco Systems 2960 - page 33

    CH A P T E R 2-1 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 2 Switch Instal lation (24- and 48-P ort Switches) This chapter describes ho w to start your switch and ho w to interpret the po wer- o n self-test (P OST) that ensures pr oper ope ratio n. It also d escribe s how to install the swit ch and how to make c onnect ions to th ...

  • Cisco Systems 2960 - page 34

    2-2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Prepar ing for Installat ion Warn ings These w arnings are translate d into se veral languages in the Regulatory Comp liance and Safety Informat ion for the Catalyst 2960 Switch document that ships with the switc h. War ni n g ...

  • Cisco Systems 2960 - page 35

    2-3 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Preparing for Installation Statement 371—Power Cable and AC Adap ter War ni n g Do not work on the sy s tem or connect or disco nnect cables during periods of lightning activity. Statement 1001 War ni n g Read the installati ...

  • Cisco Systems 2960 - page 36

    2-4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Prepar ing for Installat ion War ni n g This unit might have more than one p ower supply connection. All connections must be removed t o de-energize the unit. Statement 10 28 War ni n g Only trained and qualif ied personnel sho ...

  • Cisco Systems 2960 - page 37

    2-5 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Preparing for Installation Thes e stan dards pro vide guide lines for ac ceptable w orking en vironments and acceptable l ev els of suspended p articulate matter: • Network E qu ipment Build ing Systems (NEBS) GR-63-CORE • ...

  • Cisco Systems 2960 - page 38

    2-6 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Prepar ing for Installat ion Verifying Pac kage Con tents This secti on does no t apply to th e Catalyst 2960-8TC , 2960G- 8TC, an d 2960PD-8T T -L switches. For informatio n applicab le to those switch es, see Chapter 3, “ S ...

  • Cisco Systems 2960 - page 39

    2-7 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Install ing the Switch Verifying Sw itch Operation Before yo u install t he switch in a rack, on a wall, or on a table or shelf, you should power on the sw itch and v erify tha t the switch passes POST . If your configurat ion ...

  • Cisco Systems 2960 - page 40

    2-8 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Instal ling the Swi tch Rack-Mou nting This section app lies to all switches ex cept the Catalyst 2960-8T C-L, Catalyst 2960G-8T C-L, and Catalyst 29 60PD-8TT -L switches. F or information ap plicable to th ose switches, see Ch ...

  • Cisco Systems 2960 - page 41

    2-9 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Install ing the Switch Attaching Brackets to the Cat alyst 2960 S witch The b racket orie ntatio n and th e bra ckets that you u se depe nd on w hether y ou are attac hing t he brac kets for a 19-in ch or a 24- inch rack. For ...

  • Cisco Systems 2960 - page 42

    2-10 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Instal ling the Swi tch Figur e 2-5 At taching Br ack ets fo r 24-Inch Ra cks to a Catalyst 2960 Swit ch, Rear P anel F orwar d Figur e 2-6 At taching Br ack ets fo r 19-Inc h T elco Rac ks to a Catalyst 2960 Switch Figur e 2- ...

  • Cisco Systems 2960 - page 43

    2-11 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Install ing the Switch Mounting the Switch in a Rack After the brack ets are attached to t he switch, use th e f our supplied number- 12 Phillips machine scre ws to secur ely attach the b racket s to the rack, as show n in Fi ...

  • Cisco Systems 2960 - page 44

    2-12 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Instal ling the Swi tch Attaching the Cable Guide W e recommend that you attach the cable gui de to prev ent the cables from obscuring the fr ont panel of the swit ch and the oth e r de vices ins talled in the ra ck. Use the s ...

  • Cisco Systems 2960 - page 45

    2-13 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Install ing the Switch Attaching the Brackets to the Switch for Wall-Mounting Figure 2-10 shows ho w to attach a 19- inch bracket to one side of the switch. Follow the same steps to attach the s econd bra cket to t he opposit ...

  • Cisco Systems 2960 - page 46

    2-14 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Instal ling the Swi tch Mounting the Switch on a Wall For th e b est support of the swi tch and cables, mak e sure the switch is a ttached securely to w a ll studs or to a firmly atta ched plywo od mounti ng backboa rd. Mo unt ...

  • Cisco Systems 2960 - page 47

    2-15 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Installing and Removing SFP Modules After the switch i s mounted on the wall, do these tasks to complet e the installation: • Po wer on th e switch. See the “V erifying Sw itch O peratio n” section on p age 2-7 . • Co ...

  • Cisco Systems 2960 - page 48

    2-16 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Installi ng and Rem oving SF P Mo dules stipulations for SFP module connections. Use only Cisco SFP m odules on the Catalyst 2960 switch. Cisco SFP modules and the Catalyst 2960 switch supp ort the Quality ID feature. Only SFP ...

  • Cisco Systems 2960 - page 49

    2-17 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Installing and Removing SFP Modules Figur e 2-14 Installing an SFP Module int o an SFP Modu le Slot Step 5 Remov e th e dust plugs from the SFP module op tical ports and store them for later use. Cautio n Do not remov e the d ...

  • Cisco Systems 2960 - page 50

    2-18 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Connecti ng to the 10 /100 and 10 /100/ 1000 Ports Figur e 2-15 Remo ving a Bale-Clasp Latch SFP Module b y Using a F lat-Blade Screw dr iver Step 5 Grasp the SFP modu le between your thum b and index finger , and carefully re ...

  • Cisco Systems 2960 - page 51

    2-19 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Connecting to SFP Modules Figur e 2-16 Connecting to an Ether net P ort Step 2 Connect the other en d of the cab le to an RJ-4 5 connector on the othe r device. The po rt LED turn s on when bot h the swi tch and th e conne ct ...

  • Cisco Systems 2960 - page 52

    2-20 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Connecting t o SFP Modu les Connectin g to Fibe r- Optic SFP Modules Foll ow these steps to connect a fiber -optic cable to an SFP module: War ni n g Class 1 laser product. Statement 1008 Cautio n Do not remov e the rubber plu ...

  • Cisco Systems 2960 - page 53

    2-21 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Connecting to SFP Modules Connectin g to 1000BA SE-T SFP Modules Foll ow these steps to connect a Category 5 (or higher) cable to a 1000BASE-T SFP modu le: Cautio n T o prevent ESD damage , follow your norma l boar d and comp ...

  • Cisco Systems 2960 - page 54

    2-22 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Connecti ng to a Dual-Pur pose Port Connecting to a Dual -Purpose Port Y ou can configure the dual-p urpose port as either a 10/100/1 000 port or as an SFP module port. For a detailed descr ip tion of this port, see “Dual-Pu ...

  • Cisco Systems 2960 - page 55

    2-23 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 2 Switch Instal lation (24- and 48-Port Switches ) Where t o Go Next • Use the CLI from th e con sole to config ure the sw itch as a member of a clu ster or as an ind iv idual switch . See the Ca talyst 2960 Swit ch Software Conf i guration Guide and the Cat alyst 29 60 Swi ...

  • Cisco Systems 2960 - page 56

    2-24 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 2 Switch Installation (24- and 48-Port Switches) Where to Go Nex t ...

  • Cisco Systems 2960 - page 57

    CH A P T E R 3-1 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 3 Switch Installation (8-Port Switches) This chapter descri b es ho w to start your switch and ho w to interpret the po wer- o n self-test ( POST) that ensures proper oper ation. It also describ es how to install the switch. Th e installation information in this chapter i ...

  • Cisco Systems 2960 - page 58

    3-2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Prepar ing for Installat ion War ni n g Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when conne ct ed to power and ground and can cau ...

  • Cisco Systems 2960 - page 59

    3-3 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Preparing for Installation War ni n g Class 1 laser product. Statement 1008 War ni n g The plug-socket combination must be ac cess ible at all times, because it serves as the main disconnecting device. Statement 101 9 War ni n g This e ...

  • Cisco Systems 2960 - page 60

    3-4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Prepar ing for Installat ion • Humid ity arou nd t he swit ch must no t exceed 8 5 pe rcen t. • Altitude a t the installati o n site must n ot be g reater than 1 0 ,000 feet (3 ,049 meter s). • The bottom of the switch might be h ...

  • Cisco Systems 2960 - page 61

    3-5 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Preparing for Installation Y ou c an ord er an opt ional c able gu ard to se cure cables to the fr ont of the swit ch and pr ev e nt the m from being ac cident ally re moved. T o ord er a cable gu ard, cont act yo ur Cisco repr esenta ...

  • Cisco Systems 2960 - page 62

    3-6 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Verifying Sw itch Op eration Verifying Switch Operatio n Before instal ling the switch in a rack, or on a desk, a shelf, or a wa ll, you should power on the switch and verify that it pa sses POST . T o power on the sw itc h, conn ect o ...

  • Cisco Systems 2960 - page 63

    3-7 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Install ing the Switch Step 2 Remo ve the four rubb er fee t from the adhesi ve strip, and attach the m to th e rece ssed area s on th e botto m of the u nit. Th is pre vents the swi tch from sliding on the desk or shelf . Note W e str ...

  • Cisco Systems 2960 - page 64

    3-8 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Instal ling the Swi tch Figur e 3-1 Installing t he Mounting Screws on T op of a Des k or Shelf Step 3 Peel the adhesi ve strip of f the bottom o f the scre w template, and attac h it to the top of the desk or shelf. Step 4 Use a 0.144 ...

  • Cisco Systems 2960 - page 65

    3-9 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Install ing the Switch Figur e 3-2 Mounting the Switc h on T op of a Des k or Shelf After th e switch is mounted on the desk or shelf, do these tasks to complet e the installati on: 1. Po wer on th e switch. See the “V erifying Sw it ...

  • Cisco Systems 2960 - page 66

    3-10 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Instal ling the Swi tch Figur e 3-3 Installing t he Mounting Screws U nder a Desk or Shelf Step 4 Use a 0.144 -inch (3. 7 mm) or a #27 drill bi t to drill a 1/ 2-in ch (12. 7 mm) hole i n the thre e screw template sl ots. Step 5 Inser ...

  • Cisco Systems 2960 - page 67

    3-11 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Install ing the Switch Figur e 3-4 Mounting the Switc h Under a Des k or Shel f After th e switch is mounted u nder the desk or sh elf, do th ese tasks to complete the installation: 1. Po wer on th e switch. See the “V erifying Sw i ...

  • Cisco Systems 2960 - page 68

    3-12 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Instal ling the Swi tch Wall-Mounting (with Mounting Screws) This section is specif ic to the Catalyst 2960 8-port sw itches. For infor matio n appl icable t o the other Catalyst 296 0 switches , see Chap ter 2, “Switch In stalla ti ...

  • Cisco Systems 2960 - page 69

    3-13 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Install ing the Switch Step 4 Attach the screw t emplate to the wall. Step 5 Use a 0.144 -inch (3. 7 mm) or a #27 drill bi t to drill a 1/ 2-in ch (12. 7 mm) hole i n the thre e screw template sl ots. Step 6 Insert three scr ews in th ...

  • Cisco Systems 2960 - page 70

    3-14 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Instal ling the Swi tch 3. Connect to th e front-p a nel ports . See the “Connecting to the 10 /100 and 1 0/100/1 000 Ports” secti on on page 2-18 , the “Connecting to SFP Modules” section on p age 2-19 , a nd the “ Conne ct ...

  • Cisco Systems 2960 - page 71

    3-15 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Install ing the Switch For configuration i nstruct ions abo ut using th e CLI set up prog ram, go to Append ix C, “C onfiguring the Switch w ith the CLI-Based Setup Program. ” Rack-Mou nting This section is specif ic to the Cataly ...

  • Cisco Systems 2960 - page 72

    3-16 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Instal ling the Swi tch Mounting the Switch in a 19-Inch Rack After the bra c kets are a ttached to the switch, in sert the switch into th e 19-inch r ack, and alig n the bracket in the rack . Use ei ther the 10-32 pan- head screws or ...

  • Cisco Systems 2960 - page 73

    3-17 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 3 Switch Instal lation (8-Port Switch es) Install ing the Switch T o mount the switch with brackets o n a wall, follo w these steps: Step 1 Attach a 19-inch brack et to on e side of th e switch . Fo llow the sam e steps to attach th e second brack et to the opposi te side , a ...

  • Cisco Systems 2960 - page 74

    3-18 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 3 S witch Installation (8-Port Switches) Where to Go Nex t Where to Go Next If the d efault co nfiguration i s satis factory , the sw itch ne eds no further configurati on. Y ou c an use a ny of these ma nageme nt opti ons to chan ge the default co nfiguration : • Start t ...

  • Cisco Systems 2960 - page 75

    CH A P T E R 4-1 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 4 Troubleshooting The LE Ds on the fro nt pane l provide troubl eshoot ing inf ormatio n abou t the sw itch. T hey show failures in the po wer -o n se lf- te st (POST ), port-con nectivity probl ems, an d overall swit ch perf orman ce. For a ful l description of the switc ...

  • Cisco Systems 2960 - page 76

    4-2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 4 Trouble shooting Diagno sing Proble ms Verify Switch POST Resu lts As the switch po wers on, it be g ins the POST , a series of tests that runs aut omatically to en sure that the switch functio n s properly . I t might take se veral minute s for the switch to complete POST ...

  • Cisco Systems 2960 - page 77

    4-3 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 4 Troublesh ooting Diagnosi ng Pr oblems Ethernet and Fiber Cabl es Make sure that you ha ve the cor rect cable type for the connection: • For Ethern et, use Cat egory 3 cop per cable fo r 10 Mb/s uns hielde d twist ed pair (UT P) conne ctio ns. Use ei ther Category 5, Categ ...

  • Cisco Systems 2960 - page 78

    4-4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 4 Trouble shooting Diagno sing Proble ms Use the show i nterf aces pr i v ileged E XEC com mand t o verify the port or inte rface e rror-disabl ed, disabled , or shutdown status on bo th sides of the conn ecti on. If necessar y , re-enabl e the port or t he interf ace. Ping t ...

  • Cisco Systems 2960 - page 79

    4-5 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 4 Troublesh ooting Cleari ng the Switch IP Address and C onfigurati on T o maximi ze switc h perform ance and to ensur e a link, follow one of these gu ideli nes wh en you set or chan ge the se ttings for d uplex and spee d: • Let both por ts autonegoti ate both spe ed and d ...

  • Cisco Systems 2960 - page 80

    4-6 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 4 Trouble shooting Locating t he Switch Seria l Number Locating the Swit ch Serial Number If you cont act Cisc o T e chnica l Assista nce, you nee d to kn ow the ser ial num ber o f you r switc h. See Figure 4-1 thr ough Figure 4-3 to locate the s erial number on your switc h ...

  • Cisco Systems 2960 - page 81

    4-7 Catalyst 2960 Switch Hardware Installation Gui de OL-7075-05 Chapter 4 Troublesh ooting Locati ng the Switch S erial Nu m ber Figur e 4-3 Ser ial Num ber Loca tion on t he Catal yst 296 0-8TC-L, Ca talyst 29 60G-8TC-L, and Catalyst 2960PD-8TT -L Sw i t ch es 200186 SN: XXXNNNNXXXX ...

  • Cisco Systems 2960 - page 82

    4-8 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Chapter 4 Trouble shooting Locating t he Switch Seria l Number ...

  • Cisco Systems 2960 - page 83

    A- 1 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 APPENDIX A Connector and Cabl e Specifications This a ppendix describe s the Catalyst 2960 swit ch ports an d the cabl es and adapters th at you use to connec t the switch to other devices an d includ es these se ctions : • Connector Specif ications, page A-1 • Cable and A dap ...

  • Cisco Systems 2960 - page 84

    A- 2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendi x A Connector a nd Cable Speci fications Connecto r Specificati ons When co nnect ing th e por ts to 10BASE-T - a nd 10 0B A SE-TX -compa tible devices, such as swi tches or repeate rs, you can use a two or four twiste d-pair, crossover cable. Figure A-6 shows the tw o twist ...

  • Cisco Systems 2960 - page 85

    A-3 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix A Connector an d Cable Specifi cations Connec tor Specif ications SFP Modu le Ports The Catalyst 2960 switch uses SFP modules for f iber-optic and copper u plink ports. See the Catalyst 2960 switch release notes f or a list of suppo rted SFP modules. Figur e A -2 F iber - ...

  • Cisco Systems 2960 - page 86

    A- 4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendi x A Connector a nd Cable Speci fications Cable and A dapter Spec ifications Figur e A -4 1 0/1 0 0/1 0 00 Po rt Pinouts Console P ort The co nsole port uses a n 8-p in RJ -45 conn ecto r, wh ich is descri bed i n Ta b l e A-2 and Ta b l e A-3 . The supplied RJ-45-to-D B-9 ad ...

  • Cisco Systems 2960 - page 87

    A-5 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix A Connector an d Cable Specifi cations Cabl e and Adapt er Speci ficati ons Ta b l e A -1 Fiber -Optic S FP Module P ort Cab ling Specific ations SFP M odul e Wavelength (nan omet ers) F iber T ype Core Size/Cladding Size (micron) Modal Band widt h (MHz/km) 1 1. Modal ban ...

  • Cisco Systems 2960 - page 88

    A- 6 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendi x A Connector a nd Cable Speci fications Cable and A dapter Spec ifications Two Tw isted-Pair Ca ble Pinouts Figure A-5 and Figure A-6 show the sc h ematics of two twisted-pair cables for connecting to 10 B ASE-T - and 100BASE-TX-c ompa tible devices. Figur e A -5 T wo T wis ...

  • Cisco Systems 2960 - page 89

    A-7 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix A Connector an d Cable Specifi cations Cabl e and Adapt er Speci ficati ons Figur e A -8 F our T wisted-P air Crosso ver Cab le Sc hematics for 1 0/1 0 0/1 0 0 0 P orts Crossove r Cab le and Ad apter Pinouts This se ction describe s how to ide ntify a cros sover cable an ...

  • Cisco Systems 2960 - page 90

    A- 8 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendi x A Connector a nd Cable Speci fications Cable and A dapter Spec ifications Adapter Pino uts Ta b l e A-2 lists t he pinouts for the consol e port, the RJ-45-to- DB-9 adapter ca ble, an d the consol e device. Ta b l e A-3 list s the pinou ts for th e console port, RJ -45-to- ...

  • Cisco Systems 2960 - page 91

    B-1 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 APPENDIX B Technical Specifications These tables list the techn ical spec ific ations for t he Catalyst 2960 switches: • Ta b l e B-1 on pa ge B-1 , En vironmental Specif ications for All Catalyst 2960 Switch es • Ta b l e B-2 on pa ge B-2 , Catalyst 2960 -24-S, Catalyst 2960-2 ...

  • Cisco Systems 2960 - page 92

    B-2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendi x B Technica l Speci fications Ta b l e B-2 Catalys t 2960-2 4-S, Cat alyst 29 60-24TC-S, a nd Catalyst 2960-48TC -S Switc h Spec ifi cat ion s Po wer Requir ements AC input volta ge Power consumption Pow er rating 100 to 240 V A C (autor anging) 1.3 to 0.8 A, 50 to 60 H z 30 ...

  • Cisco Systems 2960 - page 93

    B-3 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix B Technical Spec ification s Physical Dimensions W eight Dime nsi ons (H x D x W) 8 lb ( 3.63 k g) 1.73 x 9.3 x 17.5 i n. (4.39 x 23.62 x 44.45 cm) Ta b l e B-5 Cataly st 2960 -48TC-L and Catalyst 29 60-48TT -L Switc h Specifications Po wer Requir ements AC input volta ge ...

  • Cisco Systems 2960 - page 94

    B-4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendi x B Technica l Speci fications Ta b l e B-7 Catalyst 29 60-8TC-L, Catalyst 296 0G-8TC-L, and Cataly st 2960PD-8T T -L Switc h Spec ifi cat ion s Po wer Requir ements AC input volta ge DC input v oltage Power consumption Power rating 100 to 240 V A C ( autorangi ng) 0.5 to 0.2 ...

  • Cisco Systems 2960 - page 95

    C-1 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This ap pendi x provides a com mand-l ine in terface (C LI)-b as ed setup proce dure for a st andal one swi tch. For produc t overview informa tion, see Cha pter 1, “Pro duct Overvie w . ” Before yo u connect th ...

  • Cisco Systems 2960 - page 96

    C-2 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendix C Configuring the Switch with the CLI-Based S etup Program Connecti ng to the Consol e Port After you ha ve entered the conf iguration informatio n for the switch, sav e it to flash memory by usi ng the wri te memory privileged EXEC co mmand . Note While in Express Setup mod ...

  • Cisco Systems 2960 - page 97

    C-3 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Starting the Terminal Emulation Software Figur e C-1 Con necting a S w itch to a PC Step 2 Attach t he DB-9 fe male DTE of the adap ter cab le to a PC se rial po r t, or attach an ap propri ate ada p ter to the ...

  • Cisco Systems 2960 - page 98

    C-4 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendix C Configuring the Switch with the CLI-Based S etup Program Connecting t o a Power Sourc e Connecting to a Powe r Source Foll ow these steps to connect to a po wer source: Step 1 Connect one end of the supplied AC po w er cord t o the power conne ctor on a sw itch rear panel. ...

  • Cisco Systems 2960 - page 99

    C-5 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Entering the Initial Configuration Information Completing the Setup Program Foll ow these steps to complete the setu p program and to create an ini tial configurat io n for the switch: Step 1 Ente r Ye s at thes ...

  • Cisco Systems 2960 - page 100

    C-6 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendix C Configuring the Switch with the CLI-Based S etup Program Enterin g the Initial Conf igurati on Informat ion Step 9 Ente r Y to conf igure the switch as the c luster c ommand switch . Enter N to configu r e it as a member swit ch or as a stand alone sw itch. If you ente r N ...

  • Cisco Systems 2960 - page 101

    C-7 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Entering the Initial Configuration Information T o use the C L I, enter commands at the Switch > prompt through the cons ole po rt by us ing a termi nal emula tion progr am or t hrough the net work by using T ...

  • Cisco Systems 2960 - page 102

    C-8 Catalyst 2960 Swi tch Hardware In stallation Guide OL-7075-05 Appendix C Configuring the Switch with the CLI-Based S etup Program Enterin g the Initial Conf igurati on Informat ion ...

  • Cisco Systems 2960 - page 103

    IN-1 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 INDEX Numerics 10/100/10 00 ports cable l ength s 2-5, 3-4 connec ting t o 2-18 conn ectors and cables A-1 to A-2 describe d 1-9 illustrated 1-3 PoE 1-9 spee d indicato r 1-17 10/100/10 00 port s, describ ed 1-11 10/100 por ts 1-8 10/100 por ts PoE 1-9 19- and 24-i nch ra cks 2-8, ...

  • Cisco Systems 2960 - page 104

    Index IN-2 Catalyst 2960 Switch Hard ware Installation Gui de OL-7075-05 Cisco IOS comm and-line int erface 1-21 Cisco IP Phones , conne cting t o 1-9, 2-18 Cisco RPS See RPS CiscoView 1-21 class 1 laser warn ing 2-3, 3-3 CLI accessin g by using Express Set up C-1 accessin g throu gh co nsole p ort C-2 describe d 1-21 comm and-l ine i nte rfac e Se ...

  • Cisco Systems 2960 - page 105

    Inde x IN-3 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 G ground connec tion warning 2-4, 3-3 ground ed equi pmen t warni ng 2-3, 3-3 H HP OpenView 1-21 humidity, r e lative B-1 I installati on assigni ng the IP a ddress C-4 conn ecting to a p ower source C-4 mounting in a rack (24- a nd 48-por t switches) 2-8 to 2-11 in a rack ...

  • Cisco Systems 2960 - page 106

    Index IN-4 Catalyst 2960 Switch Hard ware Installation Gui de OL-7075-05 O overhea ting w arning 2-2, 3-1 P packin g list 2-6, 3-5 pinouts 10/100 por ts A-3 adap ter s A-7 console port A-8 crossover c ables four twiste d-pair , 1000BASE- T ports A- 7 two tw isted-pa ir 10/10 0 port s A-6 RJ-45-to -DB-2 5 termina l adapter A-8 RJ-45-to -DB-9 term in ...

  • Cisco Systems 2960 - page 107

    Inde x IN-5 Catalyst 2960 Switch Hard wa re Installation Gui d e OL-7075-05 RPS attachmen t warning 1-19, 2-2, 2-7 connec ting t o 2-7, 3-6 conn ector 1-18 LED 1-13 RPS warning 2-2, 2-14 S safety warnings 2-2, 3-1 SC connec tor A-3 security slot 1-20 serial number lo cati on 4-6 SFP modules 1000BASE -T suppor ted spee ds 1-15 bale-cla sp latch remo ...

  • Cisco Systems 2960 - page 108

    Index IN-6 Catalyst 2960 Switch Hard ware Installation Gui de OL-7075-05 warnings (c ontinue d) local and national electr ical codes compliance 2-4, 3-3 more t han one power supply 3-3 no user-ser vicea ble parts 2-4 overhea ting pr eventi on 2-2, 3-1 plug-socke t com binatio n 2-3 PoE 2-2, 3-2 power cable and AC adapter 2-3, 3-2 power suppl ies 2- ...

Manufacturer Cisco Systems Category Computer Hardware

Documents that we receive from a manufacturer of a Cisco Systems 2960 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- 2960 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems 2960
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems 2960.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems 2960, service manual, brief instructions and user manuals Cisco Systems 2960. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems 2960.

Similar manuals

A complete manual for the device Cisco Systems 2960, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems 2960 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems 2960.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems 2960 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems 2960, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems 2960, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems 2960 - which should help us in our first steps of using Cisco Systems 2960
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems 2960
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems 2960 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems 2960?

Use the form below

If you did not solve your problem by using a manual Cisco Systems 2960, ask a question using the form below. If a user had a similar problem with Cisco Systems 2960 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)