English dropdown-ico

Manual Kraun KR.QA

12 pages Not applicable
Download

Go to site of 12

Summary
  • Kraun KR.QA - page 1

    www .kraun.it Avvertenza Qualsiasi variazione fatta dall’utilizzatore o da altri non au- torizzati può compromettere la conformità e la sicurezza del prodotto di cui il produttore non si ritiene responsabile W ar ning The manufacturer is under no circumstances liable for any unauthorised modifications made to the product by the user or any oth ...

  • Kraun KR.QA - page 2

    2 www .kraun.it Guida Rapida CONTENUTO DELLA CONFEZIONE VIST A COPERCHIO (PORZIONE ESPOST A) VIST A DALL ’AL TO Sistema RAID Cavo FireWire 400 Cavo FireWire 800 Cavo USB Indicatore lato anteriore 2 Viti HDD di Riserva Cavo e S ATA Alimentatore esterno 2 viti HDD di riserva 2 manici 8 viti HDD Fessure HDD (HDD slot) (indica da HDD 1 a HDD 2) 1 2 ...

  • Kraun KR.QA - page 3

    Guida Rapida www .kraun.it 3 INST ALLAZIONE HARD DRIVES 1. Collocarsi frontalmente rispetto alla parte anteriore. Posizionare entrambe le mani sul bordo anteriore. Spingere il coperchio dalla parte anteriore verso la parte posteriore, usando i pollici. 2. Sollevare il coperchio superiore per togliere i manici dalla relativa collocazione e prendere ...

  • Kraun KR.QA - page 4

    4 www .kraun.it Guida Rapida 4. Posizionare il manico dalla parte opposta rispetto ai connettori di interfaccia e allinearlo con le aperture dei fori delle viti. 5. Assicurare il manico sull’HDD inserendo e avvitando le viti, prima quella a sinistra, successivamente quella a destra. 6. Ora, girare l’HDD in modo che il PCBA sia rivolto verso l? ...

  • Kraun KR.QA - page 5

    Guida Rapida www .kraun.it 5 COLLEGAMENTO ALL ’ HOST 12. Collegare l’adattatore di alimentazione AC/DC. 13. Inserire entrambe le estremità del cavo scelto (dei cavi scelti) nella porta corrispondente del Sistema RAID e dell’host. 14. Girare l’interruttore di accensione sulla posizione “on”. 15. Una volta collegato, la luce LED del Sist ...

  • Kraun KR.QA - page 6

    6 www .kraun.it Guida Rapida COMMUT A TORE MODALITÀ RAID (RAID MODE SWITCH) RAID 0 (Striping) RAID 1 (Mirroring) (copia) JBOD Spegnere sempre il Sistema RAID prima di agire sul commutatore per impostare o cambiare la modalità RAID per assicurarsi che i nuovi cambiamenti siano accettati dal Sistema. Nota : L ’interfaccia eSA T A non può support ...

  • Kraun KR.QA - page 7

    Quick Guide www .kraun.it 7 P ACKAGE CONTENTS COVER VIEW (EXPOSED) TOP VIEW RAID System unit FireWire 400 cable FireWire 800 cable USB cable “Front” Indicator 2 Spare HDD Screws eSA T A cable External power supply 2 spare HDD screws 2 handles 8 HDD screws HDD Slots (indicates HDD 1 through HDD 2) 1 2 ...

  • Kraun KR.QA - page 8

    8 www .kraun.it Quick Guide INST ALLING HARD DRIVES 1. Place its front view facing you. Position both hands on the front edge. Push the lid front to back, using your thumbs. 2. Lift the top lid up to remove the handles from the enclosure itself and locate the HDD screws in the packaging box. 3. Place the HDD with the metal cover side facing up and ...

  • Kraun KR.QA - page 9

    Quick Guide www .kraun.it 9 4. Position the handle facing away from the interface connectors and align it with the screw hole openings. 5. Fasten the handle onto the HDD by inserting and tightening the screws, the left one first, then the right one. 6. Now , flip the HDD so it is facing you with the PCBA on top and the unfasten handle side facing ...

  • Kraun KR.QA - page 10

    10 www .kraun.it Quick Guide CONNECTING TO THE HOST 12. Connect the AC/DC power adapter . 13. Insert both ends of the chosen cable(s) into the corresponding port of the RAID System and the host. 14. T urn the power switch to the “on” position. 15. When connected, the System LED light will turn green; the HDD LED lights will turn white and flas ...

  • Kraun KR.QA - page 11

    Quick Guide www .kraun.it 11 RAID MODE SWITCH RAID 0 (Striping) RAID 1 (Mirroring) JBOD Always power off the RAID System before setting or changing the RAID mode switch to ensure the new changes are accepted by the System. Note: The eSA T A interface cannot support the JBOD mode. It is only available when connecting under the USB 2.0, FireWire 400, ...

  • Kraun KR.QA - page 12

    www .kraun.it Made in China Aiutaci a pr oteggere l’ambiente, rispetta la nor mativa! Apparecchiatur e Elettriche ed Elettroniche da dismetter e Questo prodotto non deve essere smaltito come rifiuto urbano, ma deve essere oggetto di raccolta separata. T utti i prodotti oggetto di raccolta separata sono identificati con il seguente simbolo: Se q ...

Manufacturer Kraun Category Server

Documents that we receive from a manufacturer of a Kraun KR.QA can be divided into several groups. They are, among others:
- Kraun technical drawings
- KR.QA manuals
- Kraun product data sheets
- information booklets
- or energy labels Kraun KR.QA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kraun KR.QA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kraun KR.QA, service manual, brief instructions and user manuals Kraun KR.QA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kraun KR.QA.

Similar manuals

A complete manual for the device Kraun KR.QA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kraun KR.QA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kraun KR.QA.

A complete Kraun manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kraun KR.QA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kraun KR.QA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kraun KR.QA, that we can find in the current document
3. Tips how to use the basic functions of the device Kraun KR.QA - which should help us in our first steps of using Kraun KR.QA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kraun KR.QA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kraun KR.QA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kraun KR.QA?

Use the form below

If you did not solve your problem by using a manual Kraun KR.QA, ask a question using the form below. If a user had a similar problem with Kraun KR.QA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)