English dropdown-ico

Manual Cisco Systems OL-4858-07

36 pages 0.32 mb
Download

Go to site of 36

Summary
  • Cisco Systems OL-4858-07 - page 1

    CHAPTER 6-1 Multiprocessor WAN Application Module User Guide OL-4858-07 6 Command Reference This chapter lists new and re vised commands specif ic to the MW AM conf iguration. The commands are categorized according to the console from which the y are executed. Supervisor Console Commands The following commands are a vailable at the Supervisor conso ...

  • Cisco Systems OL-4858-07 - page 2

    6-2 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Processor Control Commands Processor Control Commands The Processor Control (PC) commands are av ailable when you session into MW AM processor 1 from the Supervisor console. The PC commands provide v arious functions for MW AM processors. T o access the PC c ...

  • Cisco Systems OL-4858-07 - page 3

    6-3 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Command Details mwam module allowed-vlan T o conf igure the Ethernet connectivity from the backplane (i.e., switch fabric) to the indi vidual processors on the MW AM, use the mwam module allowed-vlan command in global conf iguration mode. T o ...

  • Cisco Systems OL-4858-07 - page 4

    6-4 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module vlan-based T o assign MW AM traff ic to a VLAN QoS policy , use the mwam module vlan-based command in global conf iguration mode. T o remove this conf iguration, use the no form of the command. mwam module slot_number port port_nu ...

  • Cisco Systems OL-4858-07 - page 5

    6-5 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details session slot T o establish a command session to a processor on an MW AM, use the session slot command in privile ged EXEC mode. session slot slot_number processor pr ocessor_number Syntax Description Defaults There are no default beha vior or ...

  • Cisco Systems OL-4858-07 - page 6

    6-6 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Tue Oct 14 11:04:43 EDT 2003 Copyright (c) 2002-2003 by cisco Systems, Inc. All rights reserved. Kernel 2.4.10.komodo on an i686 login: root Password: SVCMWAM Image version 2.1(0.1b) Tue Oct 14 11:04:43 EDT 2003 Copyright (c) 2002-2003 by cis ...

  • Cisco Systems OL-4858-07 - page 7

    6-7 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam module T o display connectivity information about the indi vidual processors on the MW AM, use the show mwam module command in pri vileged EXEC mode. show mwam module slot_number port port_number { state | traff ic } Syntax Descript ...

  • Cisco Systems OL-4858-07 - page 8

    6-8 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Last clearing of "show interface" counters never Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 67 Queueing strategy: fifo Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute o ...

  • Cisco Systems OL-4858-07 - page 9

    6-9 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: Off Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Trunking VLANs Enabled: 1-999 Pruning VLANs Enabled: 2-10 ...

  • Cisco Systems OL-4858-07 - page 10

    6-10 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam bootflash access Note The MW AM bootf lash access must be enabled if you want to operate in Supervisor mode. T o enable f ile transfer requests between the Supervisor bootf lash and the individual processors on the MW AM, use the mwam b ...

  • Cisco Systems OL-4858-07 - page 11

    6-11 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging listen mwam T o conf igure MW AM logging input to the Supervisor from an MW AM in the chassis, use the logging listen mwam command in global conf iguration mode. T o remov e this conf iguration, use the no form of the command. loggin ...

  • Cisco Systems OL-4858-07 - page 12

    6-12 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The port numbering pattern is important if you are conf iguring other UDP ports on either the Supervisor or the MW AM processor . Examples The following e xample illustrates the logging listen mwam command: router(config)# logging listen mwa ...

  • Cisco Systems OL-4858-07 - page 13

    6-13 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details execute-on T o initiate a remote command request on an MW AM processor from the Supervisor console, use the execute-on command in pri vileged EXEC mode. execute-on { slot_number | all } { pr ocessor_number | all } command [ subcommand ] Synt ...

  • Cisco Systems OL-4858-07 - page 14

    6-14 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details T o terminate a remote command that is in progress, the user can activ ate the escape sequence def ined on the Supervisor console. For e xample, if a user initiates a log show command on a remote MW AM processor and the command ex ecution is ...

  • Cisco Systems OL-4858-07 - page 15

    6-15 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module cpu logging T o conf igure the severity le vel of MW AM logging information to send to the Supervisor module, use the mwam module cpu logging command in global conf iguration mode. T o remov e this conf iguration, use the no form ...

  • Cisco Systems OL-4858-07 - page 16

    6-16 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The following e xample allows the Supervisor console to display deb ugging log messages receiv ed from processor 2 on the MW AM in slot 5: Sup-7600(config)# mwam module 5 cpu 2 logging debug ...

  • Cisco Systems OL-4858-07 - page 17

    6-17 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show logging T o display the slav e log options that are enabled on the MW AM, use the show logging command in privile ged EXEC mode. show logging { slot slot_number | summary } Syntax Description Defaults There are no default beha vior or v ...

  • Cisco Systems OL-4858-07 - page 18

    6-18 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Field descriptions for the output of this command are listed below: Activ e Processor is operational and remote console/logging is acti ve. Online Processor is operational but remote console/logging is not acti ve. Note This state commonly o ...

  • Cisco Systems OL-4858-07 - page 19

    6-19 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details clear logging slot T o clear the slav e log options that are enabled on the MW AM, use the clear logging slot command in privile ged EXEC mode. clear logging slot slot_number counts Syntax Description Defaults There are no default beha vior ...

  • Cisco Systems OL-4858-07 - page 20

    6-20 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show processor T o show status information about an MW AM processor, use the sho w processor command av ailable at the PC complex (processor 1 on the MW AM). show pr ocessor { pr ocessor_number | all } Syntax Description Defaults There are n ...

  • Cisco Systems OL-4858-07 - page 21

    6-21 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0% CPU Utilization Messages 4115/4115 VRTC Update(s) acked by PC 244528/244528 Heartbeats(s) acked from IOS 1/1 ROMMON Config Msg(s) acked from ROMMON 0/0 Supervisor Switchover Msg(s) acked from IOS 0/0 Prepare Reload Msg(s) acked from IOS r ...

  • Cisco Systems OL-4858-07 - page 22

    6-22 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show log T o show the upgrade or restart logs, use the sho w log command av ailable at the PC complex (processor 1 on the MW AM). show log { upgrade | r estart } Syntax Description Defaults There are no default beha vior or values. Command M ...

  • Cisco Systems OL-4858-07 - page 23

    6-23 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details reload T o reload processors on an MW AM, use the reload command a vailable at the PC complex (processor 1 on the MW AM). reload { pr ocessor pr ocessor_number | complex complex_number | all } Syntax Description Defaults There are no default ...

  • Cisco Systems OL-4858-07 - page 24

    6-24 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details recover-ios T o set the conf iguration register to boot with a clean conf iguration, use the reco ver-ios command av ailable at the PC complex (processor 1 on the MW AM). reco ver -ios complex_number Syntax Description Defaults There are no ...

  • Cisco Systems OL-4858-07 - page 25

    6-25 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details normal-ios T o set the conf iguration register to boot with a normal conf iguration, use the normal-ios command av ailable at the PC complex (processor 1 on the MW AM). normal-ios Syntax Description Defaults There are no default beha vior or ...

  • Cisco Systems OL-4858-07 - page 26

    6-26 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show images T o list the images stored on the MW AM, use the show images command available at the PC comple x (processor 1 on the MW AM). show images Syntax Description This command has no arguments or k eywords. Defaults There are no defaul ...

  • Cisco Systems OL-4858-07 - page 27

    6-27 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details restore T o restore the pre viously loaded IOS image and ROM-Monitor image, use the r estore command av ailable at the PC complex (processor 1 on the MW AM). restor e Syntax Description This command has no arguments or k eywords. Defaults Th ...

  • Cisco Systems OL-4858-07 - page 28

    6-28 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show tech-support T o display general information about the MW AM and its processors when it reports a problem, use the show tech-support command a vailable at the PC complex (processor 1 on the MW AM). show tech-support Syntax Description T ...

  • Cisco Systems OL-4858-07 - page 29

    6-29 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show version T o display information about the currently loaded software version along with hardw are and device information, use the show version command a vailable at the PC comple x (processor 1 on the MW AM). show version Syntax Descript ...

  • Cisco Systems OL-4858-07 - page 30

    6-30 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam config-mode T o set the MW AM conf iguration f ile storage mode, use the mwam conf ig-mode command in privileged EXEC mode from the MW AM console. mwam conf ig-mode { local | supervisor } Syntax Description Defaults Default setting depe ...

  • Cisco Systems OL-4858-07 - page 31

    6-31 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam config-mode T o sho w the MW AM conf iguration f ile storage mode, use the show mwam conf ig-mode command in privile ged EXEC mode. show mwam conf ig-mode Syntax Description Defaults There are no default beha vior or values. Comman ...

  • Cisco Systems OL-4858-07 - page 32

    6-32 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging main-cpu T o conf igure MW AM log redirection to the Supervisor for all ev ents up to a maximum specif ied log lev el, use the logging main-cpu command in global conf iguration mode. T o remov e this conf iguration, use the no form o ...

  • Cisco Systems OL-4858-07 - page 33

    6-33 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details When selecting the UDP port for an MW AM processor , you are def ining a base UDP port used at the Supervisor . T wo additional source ports, based on the selected port, are then automatically def ined. For e xample, on the Supervisor you ha ...

  • Cisco Systems OL-4858-07 - page 34

    6-34 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam T o show MW AM T ransation Look-aside Buf fers (TLBs) and cache errors, use the show mwam command in privile ged EXEC mode. show mwam Syntax Description Defaults There are no default beha vior or values. Command Modes Privile ged E ...

  • Cisco Systems OL-4858-07 - page 35

    6-35 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0x21480000:0x214FFFFF 0x001480000:0x0014FFFFF CacheMode=5, RO, Valid 0x21500000:0x2151FFFF 0x001500000:0x00151FFFF CacheMode=5, RO, Valid 0x21520000:0x21527FFF 0x001520000:0x001527FFF CacheMode=5, RO, Valid 0x21528000:0x2152FFFF 0x001528000: ...

  • Cisco Systems OL-4858-07 - page 36

    6-36 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details ...

Manufacturer Cisco Systems Category Computer Hardware

Documents that we receive from a manufacturer of a Cisco Systems OL-4858-07 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- OL-4858-07 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems OL-4858-07
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems OL-4858-07.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems OL-4858-07, service manual, brief instructions and user manuals Cisco Systems OL-4858-07. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems OL-4858-07.

Similar manuals

A complete manual for the device Cisco Systems OL-4858-07, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems OL-4858-07 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems OL-4858-07.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems OL-4858-07 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems OL-4858-07, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems OL-4858-07, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems OL-4858-07 - which should help us in our first steps of using Cisco Systems OL-4858-07
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems OL-4858-07
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems OL-4858-07 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems OL-4858-07?

Use the form below

If you did not solve your problem by using a manual Cisco Systems OL-4858-07, ask a question using the form below. If a user had a similar problem with Cisco Systems OL-4858-07 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)