Manual Homelite F2020

18 pages 0.56 mb
Download

Go to site of 18

Summary
  • Homelite F2020 - page 1

    OPERA T OR’S MANUAL T rimmer F2020 UT70121 SA VE THIS MANUAL FOR FUTURE REFERENCE Y our ne w trimmer has been engineered and manuf actured to Homelite’s high standard f or dependability , ease of operation and operator saf ety . Properly cared for , it will give y ou y ears of rugged, trouble-free perf or mance. Thank you f or buying a Homelite ...

  • Homelite F2020 - page 2

    2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ........................................... 2 - 3 ■ ■ ■ ■ ■ Symbols ........................................................................................................................ ...

  • Homelite F2020 - page 3

    3 ■ ■ ■ ■ ■ Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. ■ ■ ■ ■ ■ Keep all bystanders, children and pets at least 15 m (50 ft) away. ■ ■ ■ ■ ■ Do not operate this unit when you are tired, ill or under the influence of alcohol, drugs or medication. ■ ■ ■ ■ ■ Do n ...

  • Homelite F2020 - page 4

    4 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Read Your O ...

  • Homelite F2020 - page 5

    5 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYM ...

  • Homelite F2020 - page 6

    6 FEA TURES Fig. 1 THROTTLE TRIGGER SILENCER GUARD ST ARTER GRIP CHOKE LEVER THROTTLE CONTROL AND REAR HANDLE FRONT HANDLE DRIVE SHAFT HOUSING STRING HEAD GRASS DEFLECTOR IGNITION SWITCH INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred ...

  • Homelite F2020 - page 7

    7 WING NUT FRONT HANDLE BOL T Fig. 3 ASSEMBLY INSTRUCTIONS: GRASS DEFLECTOR See Figure 2. 1. Remove wing nut, flat washer, lock washer and bolt from the Owner’s Kit. 2. Place grass deflector over shaft and bracket. 3. Install bolt through the slots in the tabs on grass deflec- tor and bracket on drive shaft housing. 4. Install flat washer, lock w ...

  • Homelite F2020 - page 8

    8 SILENCER GUARD ASSEMBLY See Figure 4. 1. Remove silencer guard and two screws from the owner’s kit. 2. Attach the silencer guard to the rear housing. NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing. 3. Install two screws. 4. Tighten screws securely. ASSEMBL Y Fig. 4 BENT END OF SILENCER GUAR ...

  • Homelite F2020 - page 9

    9 FILLING THE TANK 1. Clean surface round fuel cap to prevent contamination. 2. Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap. 3. Carefully pour fuel mixture into the tank. Avoid spillage. 4. Prior to replacing the fuel cap, clean and inspect the gasket. 5. Immediately replace fuel cap and hand tighten. Wi ...

  • Homelite F2020 - page 10

    10 BEST CUTTING AREA DANGEROUS CUTTING AREA Fig. 6 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1. Run engine at full throttle. 2. Tap string head on ground to advance string. String advances each time the head is tap ...

  • Homelite F2020 - page 11

    11 1 IGNITION SWITCH I = ON TO RUN O = OFF TO STOP Fig. 8 THROTTLE TRIGGER THROTTLE INTERLOCK STARTING AND STOPPING See Figures 8 and 9. OPERA TION TO START A COLD ENGINE: 1. Lay trimmer on a flat, bare surface. Move switch to “I” (RUN) position. NOTE: Unit is equipped with a positive on-off switch. Make sure switch is in the “I” (RUN) posi ...

  • Homelite F2020 - page 12

    12 W ARNING: Use only original manufacturer’s replacement parts, accessories and attachments. Failure to do so can cause possible injury, poor performance, and may void your warranty. Fig. 10 Fig. 11 SPOOL RET AINER SPRING SLOTS STRING HEAD EYELETS DRIVE SHAFT MAINTENANCE ■ You may make adjustments and repairs described here. For other repairs, ...

  • Homelite F2020 - page 13

    13 STRING REPLACEMENT See Figures 12, 13, 14 and 15. 1 Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn anticlockwise. 2 Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. 3 Cut two pieces of string, each be ...

  • Homelite F2020 - page 14

    14 The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required. SPARKING PLUG This engine uses a Champion RCJ-6Y with 0.63mm (0.025 in) electrode g ...

  • Homelite F2020 - page 15

    15 PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT ACT YOUR AUTHORISED SERVICE DEALER. 1. Check spark. Remove sparking plug. Reattach the sparking plug cap and lay sparking plug on metal ...

  • Homelite F2020 - page 16

    16 1 NOTE: The carburettor adjustment needle(s) are equipped with plastic cap(s) which prevent anticlockwise rotation from the original factory adjustment. If your unit exhibits specific perf or mance problem(s) where the T rouble Shoot- ing Section recommends a anticlockwise needle adjust- ment and no adjustments have been made since original purc ...

  • Homelite F2020 - page 17

    17 SOUND POWER/PRESSURE AND HANDLE VIBRATION CHART FOR STRIMMERS / BRUSHCUTTERS Information on Noise Emission per European Machine Safety Directive 98/37/EC. The individual equipment listed was operated in a manner consistent with normal working conditions. The A-weighted sound pressure le vel (LpA) at the oper ator’s ear and the A-weighted sound ...

  • Homelite F2020 - page 18

    OPERA T OR’S MANUAL T rimmer F2020 UT70121 Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany T el.: +49 (0)2103 / 29 58 0 F ax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ryobi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Homelite / R.T .S.A BP 50012 - 95945 Roissy CDG Cedex – FRANCE Ryobi T echnol ...

Manufacturer Homelite Category Edger

Documents that we receive from a manufacturer of a Homelite F2020 can be divided into several groups. They are, among others:
- Homelite technical drawings
- F2020 manuals
- Homelite product data sheets
- information booklets
- or energy labels Homelite F2020
All of them are important, but the most important information from the point of view of use of the device are in the user manual Homelite F2020.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Homelite F2020, service manual, brief instructions and user manuals Homelite F2020. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Homelite F2020.

Similar manuals

A complete manual for the device Homelite F2020, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Homelite F2020 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Homelite F2020.

A complete Homelite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Homelite F2020 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Homelite F2020, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Homelite F2020, that we can find in the current document
3. Tips how to use the basic functions of the device Homelite F2020 - which should help us in our first steps of using Homelite F2020
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Homelite F2020
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Homelite F2020 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Homelite F2020?

Use the form below

If you did not solve your problem by using a manual Homelite F2020, ask a question using the form below. If a user had a similar problem with Homelite F2020 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)