Manual Global Machinery Company BS7

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • Global Machinery Company BS7 - page 1

    BS7 020218 BS7 ED3 INSTRUCTION MANU AL 150mm Band Sa w • Melbourne • Perth • Auckland • Hong K ong • Shanghai • T aipei • New Y ork • V erona • London • P aris ...

  • Global Machinery Company BS7 - page 2

    Contents W arr anty 2 Introduction 3 Specifications 3 Safety instructions 3 Additional safety rules f or saws 5 Unpacking 6 Assembly 6 Know y our product 7 Setting up 8 Operation 10 Maintenance 11 Repairs 11 Full 2 Y ears Home Use W arr anty Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally , due to the m ...

  • Global Machinery Company BS7 - page 3

    Specifications Nominal voltage: 230 – 240 V ac~ 50 Hz Motor power: 200W Band speed: 1400 RPM Dimensions: 355 mm x 335 mm x 550 mm T able size: 240 mm x 200 mm (adjustable between 0 and 45º) Width of throat: 150 mm Cutting depth: 50 mm Cutting width: 150 mm Saw blade length: 1085 mm Saw blade width: 3 - 6 mm Gross weight: 10.5 kg Safety instructi ...

  • Global Machinery Company BS7 - page 4

    Do not expose power tools to rain and high humidity. Do not use power tools in the presence of flammable liquids or gases. 3. Keep visit ors away from the w ork area. All visitors and onlookers , especially children and infirm persons should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool o ...

  • Global Machinery Company BS7 - page 5

    Do not use a tool if the switch does not turn the tool on and off correctly. 20. Guar d against electric shock. Prevent body contact with grounded objects such as water pipes, radiators , ranges and refrigerator enclosures. 21. Use only appr ov ed parts. When servicing, use only identical replacement parts. Use an authorised service facility to fit ...

  • Global Machinery Company BS7 - page 6

    6 Unpacking Due to modern mass production techniques, it is unlik ely that your GMC Power T ool is f aulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury. Mounting 1. It is best to attach the b ...

  • Global Machinery Company BS7 - page 7

    Know y our product 1. Saw blade 2. Wheel housing 3. Upper housing locking knob 4. Lower housing locking knob 5. Saw band tensioning knob 6. Saw band tracking knob (not shown) 7. Drive belt (not shown) 8. ON button 9. OFF button 10. T able insert 11. Rip fence 12. Rip fence locking handle 13. T able trunnion (not shown) 14. T able lock handle (not s ...

  • Global Machinery Company BS7 - page 8

    Setting up Electrical installation W ARNING. The band saw is equipped with a 230 – 240V ~ single phase 200W motor . It must be connected to an earthed socket and it is recommended that a residual current device (RCD) safety switch of 30 mA capacity be used in the circuit. If the cordset is damaged, have it replaced by an authorised service centre ...

  • Global Machinery Company BS7 - page 9

    9 Dust collection Connect dust extraction equipment to the 40 mm diam. dust extraction port. CA UTION. Wood dust and chips in a confined area can give rise to fire or an explosion. Guard against possible ignition sources. Changing the saw band The saw is supplied with a general-purpose woodcutting blade . W ARNING. Ensure that the mains plug is rem ...

  • Global Machinery Company BS7 - page 10

    10 W ARNING. Over tightening the band saw will cause premature failure . Under tightening can cause the band to disengage whilst it is in use . Adjusting the blade support heads 1. Use the Allen key to loosen the screw either side of the upper blade guide assembly. 2. Slide the assembly left or right so that the blade is in the centre of the two be ...

  • Global Machinery Company BS7 - page 11

    11 Using the rip fence The rip fence allows you to make parallel cuts in a sheet of wood, all at the same width. W ARNING. Always ensure that the saw is switched o ff and unplugged from the power supply before making any adjustments. 1. Adjust the rip fence to the required width and secure it in position with the locking handle . 2. Ensure that the ...

  • Global Machinery Company BS7 - page 12

    Carefully read the entire Instruction Manual before using this product. Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: • GMC Product Type • GMC Product Code A GMC Service Engineer wil ...

Manufacturer Global Machinery Company Category Saw

Documents that we receive from a manufacturer of a Global Machinery Company BS7 can be divided into several groups. They are, among others:
- Global Machinery Company technical drawings
- BS7 manuals
- Global Machinery Company product data sheets
- information booklets
- or energy labels Global Machinery Company BS7
All of them are important, but the most important information from the point of view of use of the device are in the user manual Global Machinery Company BS7.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Global Machinery Company BS7, service manual, brief instructions and user manuals Global Machinery Company BS7. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Global Machinery Company BS7.

A complete manual for the device Global Machinery Company BS7, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Global Machinery Company BS7 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Global Machinery Company BS7.

A complete Global Machinery Company manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Global Machinery Company BS7 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Global Machinery Company BS7, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Global Machinery Company BS7, that we can find in the current document
3. Tips how to use the basic functions of the device Global Machinery Company BS7 - which should help us in our first steps of using Global Machinery Company BS7
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Global Machinery Company BS7
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Global Machinery Company BS7 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Global Machinery Company BS7?

Use the form below

If you did not solve your problem by using a manual Global Machinery Company BS7, ask a question using the form below. If a user had a similar problem with Global Machinery Company BS7 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)