Manual Canon IP4200

36 pages 1.21 mb
Download

Go to site of 36

Summary
  • Canon IP4200 - page 1

    Premium Continuous Ink Supply Systems. Instruction Manual For Canon Printers IP4200, IP5200 MP800 & MP830 MP500, MP530 157 Union Road, Ascot V al e, V ictor ia 3032 | Phone: (+613) 9005 5555 ...

  • Canon IP4200 - page 2

    2 ...

  • Canon IP4200 - page 3

    3 Inst allation Manual IP4200, IP5200, MP800, MP 830 – 100ml Series V ersion 6-2009 Installatio n Manual ........................................................................................................... ....................................................................... 3 1) Printer pre-che ck. ...................................... ...

  • Canon IP4200 - page 4

    4 ...

  • Canon IP4200 - page 5

    5 Instruction Manual Canon Printers IP4200, IP5200, MP800, MP 830 – 100ml Series Congratulations on your purchase of a rih a c tm Continuous Ink Suppl y System (CISS). Before using the system please read this manual carefully . It will help you install the system correctly and ensure trouble free printing. Great care is taken to prep are your CIS ...

  • Canon IP4200 - page 6

    6 b) After performing a head clea n you must then perform Print Check Pattern . The computer will automatic ally ask you this, howev er if it does not, simply choose to perform a ‘Nozzle Check’ on the printer maintenance screen. Y our printer will print eith er of the following; A or B If your printer has produced a perfect resul t (A), please ...

  • Canon IP4200 - page 7

    7 2) Prep aring your new CISS for inst allation Please ensure the following are present with your CISS. (1) Air filters x5 (2) Silicone nozzle seal x 5 (3) Cable ties (spare) (4) Double sided t ape tabs (sp are) (5) Syringe and filling needle (6) S pare elbow joint s and connections (7) Single spacer clip s (for use on MP500/530 only) b) Remove you ...

  • Canon IP4200 - page 8

    8 3) Att aching Cartridge Chip s – un chipped CISS unit only If you have purchased a pre chipped system please procee d to section 4) on page 10 Y our origi nal cartridge chips must be trans ferred onto the CISS cartridges. Please follow the following steps carefully a) T urn on your printer and open the cover . The cartri dge holder will move to ...

  • Canon IP4200 - page 9

    9 d) Examine the rear of the chip to ensure the LED has not been damaged or cut off. undamaged cartridge chip damaged cartridge chip e) Place the chip onto the corresponding co loured CISS cartridge, ensuring that the small plastic lugs are inserting into the chip holes. Use a soldering iron gently melt the plastic lugs to hold the chip in place. f ...

  • Canon IP4200 - page 10

    10 4) Prep aring your ink reservoirs a) Carefully remove the sma ll travel plugs on the CISS, leaving the filler plug in place. b) Using the syringe, remove any excess ink from the inner air balance chamber . The chamber does not have to be comple tely empty for the CISS to function correctly . Removing excess ink simply helps reduces the ai r pres ...

  • Canon IP4200 - page 11

    11 THE FOLLOWING STEPS ARE VER Y IM PORT ANT FOR ALL CANON PRINTERS . 5) Inserting the silicone nozzle seals. a) Remove the printer head from your print er by lif ting the print head lock arm. The print head will then lift out b) Remove the 5 silicone seals from your kit. During manufac ture 2 seals may stick together giving the appearance of a sin ...

  • Canon IP4200 - page 12

    12 e) Incorrectly placed s ilicone seals can cause po or printing quality . Please ensure that the silicone seals do not move from position when inserting the cartridges. These seals must not cover th e silver printer head. f) Reinsert the print head (with silicone seals now fitted) back into the printer 6) Inserting the cartridges a) Remove the or ...

  • Canon IP4200 - page 13

    13 7) T ube set up (IP Series Only) a) Remove the backing to the double sided t ape and atta ch the metal tube support arm approximately 6cm from the front as pictured below . Please be careful not to twist the tubing before connecting it to the printer . b) Adjustments to the tube length may be required. T o check this, move the cartridge holder l ...

  • Canon IP4200 - page 14

    14 d) Peel off the backing t ape to the tube connection and place it as pictured below . Once again please ensure not to twist or bend the tubing. e) Place the spare travel or filler plug in the printer lid sensor button. This will keep the switch permanently activated as y our printer lid will no longer close enough to activate this switch. Please ...

  • Canon IP4200 - page 15

    15 8) T ube set up (MP800 an d MP830 only) a) Using a Phillips head screwdriver , remo ve the plastic cartridge bay sealing cover from the scanner lid. S tore this cover away with your printer manuals etc, in the event you need to re-attach it for print er warranty return issues. b) Remove the backing to the double sided t ape and atta ch the metal ...

  • Canon IP4200 - page 16

    16 e) Run the tubing as per the following exit ing through the front of the printer . Please refer to section 1 1) Finishing T ouches on 22 to complete the inst allation process. ...

  • Canon IP4200 - page 17

    17 9) T ube set up (MP500 ONL Y) a) Attach the two black clip s as pictured below . The clip s have a piece of double sided tape att ached, simply remove the backing and attach. This will prevent the scanner lid from crus hing the silicone tubing. b) Run the tubing as per the following photographs c) Adjustments to the tube length may be required. ...

  • Canon IP4200 - page 18

    18 e) Close the scanner lid and ch eck that the ink flow will not be restricted by the lid. Please note after the inst allation of the CISS the printer may not registered that the lid is closed. If this occurs plea se place some tape across the trigger to keep it activated. Please refer to section 1 1) Finishing T ouches on 22 to complete the inst ...

  • Canon IP4200 - page 19

    19 10) T ube set up (MP530 on ly) a) Feed the cartridges into the printer through the scanner lid swing arm (as depicted below) and click t he cartridges in place as per the IP4200 Manual section 6 ‘inserting the cartridges’. b) Attach a raiser clip to the printer (u sing double sided t ape) as show in the following photographs. The met al tube ...

  • Canon IP4200 - page 20

    20 c) Attach tubing holder clip at the foll owing point d) Attach the large raiser c lip s to the left and right side of the printer case. This allows the scanner lid to close wi thout crushing the feeder tubes. Lef t Side Right side e) The scanner lid has moulde d plastic p a rts which should fit into the recess of the metal tubing rod. If it does ...

  • Canon IP4200 - page 21

    21 f) Adjustments to the tube length may be required. T o check this, move the cartridge holder left and right to each end of the printer . It should reach both ends with ease. Check that the tubing is neither too long nor too short. The tubing must not interfere with the printer dat a wire nor should it fall down into the paper support or cause an ...

  • Canon IP4200 - page 22

    22 11) Final touches (all models) a) Place the CISS unit on the left hand side of your printer and Insert all the air filters into the top of each air bal ance chamber . The larger end should be inserted into the air balance chamber . b) Release the tube clamp on the front of the CISS by rolling it up. c) Reinsert power cable to the rear of your pr ...

  • Canon IP4200 - page 23

    23 12) Refilling your CISS a) Do not allow the ink levels to fall below the refill line. T o refill each ink simply remove the air filters and replace the travel plugs (to prevent the air balance chambers filling with ink) for the co lour in which you are refilling. b) Remove the filler plug and carefully pour or syringe the c orrect coloured ink i ...

  • Canon IP4200 - page 24

    24 13) Priming a) Only prime your CISS if excess air (5cm or more) is present in the tubing. It is recommended that priming is conducted in a suitabl e workspace. Please ensure to wear gloves & have some tissues handy to soak up excess ink before undertaking any priming. b) Remove the CISS from the box and pl ace it on a suit able work area wit ...

  • Canon IP4200 - page 25

    25 e) Draw air into the syringe (DO NOT A T T ACH A NEEDLE) then place it in the hole left by the removed travel plug. f) Push down very slowly on the syringe, pushing air into the reservoir . It is very important that you push down very sl owly (use the gauge on the side of the syringe and do not push down more than 1ml at a time). The ink reservo ...

  • Canon IP4200 - page 26

    26 14) Cartridge chip disable - Low ink. a) Flashing printer cartridges Y our canon cartridges will flas h when the chip thinks that ink is running low . Y ou will find that the following me ssage will appear when printing. Please continue to print as normal when this message appears. b) Canon messages – T urning off the printer st atus monitor Y ...

  • Canon IP4200 - page 27

    27 W arning message #2 Press Y es to continue. W arning Message #3 Press Y es to continue. W arning Message #4 Press and hold the resume/p aper feed button (or the stop/ reset button for the MP series printers) for 5 second s then release it. This w ill disable your printer ’s capability of reading ink levels for the indi vidual cartridge. This i ...

  • Canon IP4200 - page 28

    28 15) T rouble Shooting Please cont act ri h a c tm on (+61)3 9005 5555 If any of the following trouble shooting suggestions do not fix your problems. DO NOT CONT ACT THE PLACE OF PURCHASE a) Leaking Ink If your CISS appears to be leaking from t he cartridges, please ensure that you do not have the ink reservoirs placed higher then the printer lev ...

  • Canon IP4200 - page 29

    29 d) Ink T ank Error . If your printer is stating that an ink t ank error has occurred please check the following if the message does not i dentify the problem cartridge ; i) Check the ink feed tubing is neither too tight nor too l oose as per p age 13. . ii) Unclick and re-click all c artridges whilst in the cart ridge change position. This will ...

  • Canon IP4200 - page 30

    30 Does the printer still display ‘Ink tank errors have occurred’ on the screen? Re-click the cartridge back into position and repeat the steps in section 16) for the next cartridge in sequence . Does the error message indicate that the cartridge is not being recognised? Something is interfering with the chip or the chip is faulty . Please chec ...

  • Canon IP4200 - page 31

    31 17) Canon Error Messages If one or more of your ink cartridges cannot be recognised, please ensure that the cartridges are c licked into position and/or the chips are correctl y placed on the cartridges. The most common cause of this issue is the blockage or damage of the LED as per page 9. Ensure the printer lid is closed when checking cartridg ...

  • Canon IP4200 - page 32

    32 Service error 5100 will occur if you have the silicone tubi ng fitted too tightly on your printer . Please check the tubing by follow steps 7)b) on p a ge 13 again carefully . Y ou will then need to turn off and on your pri nter at the power button. Service error 6502 generally means that your cartridge chips cannot be recognised. The primary ca ...

  • Canon IP4200 - page 33

    33 ...

  • Canon IP4200 - page 34

    34 18) W arranty Please note that your CISS has a manuf actures warranty of 3 months from date of purchase. Y our warrant y will be void if the system is incorrectly handled. This warranty does not cover printer h ardware. Please ensure to retain your purchase receipt along with a copy of your nozzle check to assist with processing your claim 19) W ...

  • Canon IP4200 - page 35

    35 ...

  • Canon IP4200 - page 36

    36 • CIS Systems • High Grade UV Dye Inks • Pigment Inks • Blank Media 157 Union Road, Ascot V ale, Vic 3032 Web: www .rihac.com.au Email: info@rihac.com.au Ph: (+613) 9005 5555 F AX: (+613) 9326 1655 ...

Manufacturer Canon Category Printer

Documents that we receive from a manufacturer of a Canon IP4200 can be divided into several groups. They are, among others:
- Canon technical drawings
- IP4200 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon IP4200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon IP4200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon IP4200, service manual, brief instructions and user manuals Canon IP4200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon IP4200.

Similar manuals

A complete manual for the device Canon IP4200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon IP4200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon IP4200.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon IP4200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon IP4200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon IP4200, that we can find in the current document
3. Tips how to use the basic functions of the device Canon IP4200 - which should help us in our first steps of using Canon IP4200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon IP4200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon IP4200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon IP4200?

Use the form below

If you did not solve your problem by using a manual Canon IP4200, ask a question using the form below. If a user had a similar problem with Canon IP4200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)