Manual Cisco Systems OL-12397-13

34 pages 0.62 mb
Download

Go to site of 34

Summary
  • Cisco Systems OL-12397-13 - page 1

    CH A P T E R 2-1 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 2 SIP Subscribers Revised: April 1 7, 2008, OL-123 97-13 The Cisco BTS 10200 Softswitch su pports SIP subscr ibers on SI P phones that are comp liant with RFC 3261 or RFC 25 43. This section describes t he s upport for SIP subs cribers and ho w ...

  • Cisco Systems OL-12397-13 - page 2

    2-2 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Phone Initialization SIP Phone Initialization Figure 2-1 sho ws an example of SIP phone i nitialization on bootup, that is, ho w a typical phone might initialize itself an d establish its identit y with the BTS 10200. The image s ...

  • Cisco Systems OL-12397-13 - page 3

    2-3 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security When a SIP user attempts to regist er or set u p a call, the BTS 10200 challenges th e SIP subscribe r based on provisio ning in the Serving Domain Name table. If the Serving Do main Name table indicate ...

  • Cisco Systems OL-12397-13 - page 4

    2-4 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security T o enable or disable SECURE_FQDN on a successful registered subscriber 1. T ake A OR out of service to re mo ve all registered contact. 2. Enable or disabl e SECURE_FQDN for th e subscriber . 3. Bring A ...

  • Cisco Systems OL-12397-13 - page 5

    2-5 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security • The SECURE_FQDN in the A OR2SUB table is stored both in the OR A CLE da tabase and the shared memory . A OR2SUB records cannot be added or deleted dir ectly . T o add A OR2SUB records, you must spec ...

  • Cisco Systems OL-12397-13 - page 6

    2-6 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security change aor2sub aor-id=241-555-1018@s ia-SYS41CA146.ipclab.cisco.com; status=ins; Step 4 Reboot the ad apter device (such as A T A) for this subscr iber . Operations The system performs the f o llo wing c ...

  • Cisco Systems OL-12397-13 - page 7

    2-7 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security Call Processing The SIP application in the BTS 10200 implements the secure provisio ning feature for all incoming SIP messages (requests and responses) fro m SIP endpoints. When a SIP request message is ...

  • Cisco Systems OL-12397-13 - page 8

    2-8 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security 2. When a Contact header is pres en t on a reliable 1xx or 2xx response, the Contact FQDN/I P address of the response is verif ied to resolve to the Secure-IP1. If the address does not resolve properly , ...

  • Cisco Systems OL-12397-13 - page 9

    2-9 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP User Authentication SIP User Authentication The BTS 10200 can act as an authenti cation server . Authentication is en abled on the serving domain through pr ovisioning. Whene ver a SIP request is recei ved from a SIP subscr iber ...

  • Cisco Systems OL-12397-13 - page 10

    2-10 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Subscriber Calls Figure 2-2 sho ws how an inco ming request is processed, and indicates the role of the Aut hentication Service in the BTS 1 0200. Figur e 2-2 A uthentication and Pr ocessing of an Incomi ng Request (f or Example ...

  • Cisco Systems OL-12397-13 - page 11

    2-11 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Provisioning Session Timers for SIP Su bscribers Provisioning Session Timers for SIP Subscribers The system uses session timers to peri odically refresh SIP sessions during cal l processing or in-progress calls. Y ou can enable or ...

  • Cisco Systems OL-12397-13 - page 12

    2-12 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Diversion Indication for SIP Subs cribers Step 2 If not already d one, add a default sip-timer -profile-i d to the ca-conf ig table: add ca-config type=sip_timer_profile _id; datatype=string; value=<sip_timer_profile_id>; Dive ...

  • Cisco Systems OL-12397-13 - page 13

    2-13 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Comparison of SIP-Based Features and MGCP-Based Features Ta b l e 2 - 1 lists the MGCP features av ailable (in the Feature column) and then descr ibes ho w the feature differ ...

  • Cisco Systems OL-12397-13 - page 14

    2-14 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Fe atures Call Fo rward Busy 1 CFB Same as MGCP . Call Fo rward Busy V ariable Ac tiv ation CFBV A Single-stage digit collection. Call Fo rward Busy V ariable Deacti vation CFBVD Same ...

  • Cisco Systems OL-12397-13 - page 15

    2-15 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Call W aiting Delu xe Interrogation CWDI V aries with phon e functionality . Calling Identit y Delive ry and Suppression (Deli very) 2 CIDSD Presentati on status from the pho ...

  • Cisco Systems OL-12397-13 - page 16

    2-16 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Fe atures Distincti ve Ringing Call W aiting DRCW Provisioning for SIP does not differ from provisioning for MGCP . Howe ver , the deli very method for DRCW is di fferent. The subscrib ...

  • Cisco Systems OL-12397-13 - page 17

    2-17 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Outgoing Call Barrin g Acti vation OCB A Single stage digit collection. Outgoing Call Barrin g Deactiv ation OCBD Single stage digit collection. Outgoing Call Barrin g Interr ...

  • Cisco Systems OL-12397-13 - page 18

    2-18 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Cisco BTS 10200 Softswitch-Based Features Softswitch-based features are di rectly provided b y the BTS 10200. SIP phones can provide some features on their own; for information on the featur ...

  • Cisco Systems OL-12397-13 - page 19

    2-19 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features Call Forwarding The differences between the feature for SIP and the feature for MGCP are as follo ws: • There is no tone prov ided for SIP users to prompt for forwarding digi ts. The SIP ...

  • Cisco Systems OL-12397-13 - page 20

    2-20 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Note Forward ing to a URL address of record ( A OR) is not supported. SIP subscribers do not hear a f inal dial tone upon completing acti v ation or deacti vation. Instead, an announcement p ...

  • Cisco Systems OL-12397-13 - page 21

    2-21 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features • If the calling number and name are a vailable and th e presentation indication of ei ther calling number or calling name is r estricted , the display name f ield of the From header is ...

  • Cisco Systems OL-12397-13 - page 22

    2-22 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Direct Outward Dialing W ith the Direct O utward Dialing (DOD) service, a s tat ion user can place external calls to the e xchange network with out attend ant assista nce by: 1. Dialing the ...

  • Cisco Systems OL-12397-13 - page 23

    2-23 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features E.164 and Centrex Dialing Plan (Extension Dialing) The system supports E.164 and Cent rex Dialing Plan (extension d ialing) addressing from SIP subscribers served b y the local BTS 10200. ...

  • Cisco Systems OL-12397-13 - page 24

    2-24 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Planning VSCs In Networks with SIP Subscribers. Some features require SIP subscriber to enter a se ri es of numbers and characters on the SIP client or handset. T ypically , the subscriber d ...

  • Cisco Systems OL-12397-13 - page 25

    2-25 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features • Call forwardi ng on no answer v ariable acti v a tion (CFN A V A), call forw arding on no answer v ariable deacti vation (CFN A VD), call f o rwarding on no answ er interrogation ( CFN ...

  • Cisco Systems OL-12397-13 - page 26

    2-26 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Whene ver a change in VM status oc curs for a subscriber (for example, when a VM messag e is deposi ted for the subscriber , or when all such messa ges hav e be e n retriev ed), the VM serve ...

  • Cisco Systems OL-12397-13 - page 27

    2-27 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features Note For general VM pro vis ioning details, see “Pro visioning V oice Mail” in the C isco BTS 10200 Soft switch Pr ovisioning Guide . VM Within a Single Centrex Group The follo wing ex ...

  • Cisco Systems OL-12397-13 - page 28

    2-28 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Step 8 If your VM serv er does not support FQDN hostn ames, you must pro vision a serving-domain- name record in the BTS 10200 us ing the IP addresses resolv ed from the sia-xxxCAnnn.domain ...

  • Cisco Systems OL-12397-13 - page 29

    2-29 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features The follo wing provisioning steps il lustrate how to pro vide VM service for BTS 10200 Centrex subscribers across multip le Centrex gro ups. Step 1 Add a SIP trunk prof ile for voice-mail trunks. Qual ify ...

  • Cisco Systems OL-12397-13 - page 30

    2-30 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Provisionin g in this conte x t refers to feature acti vati on or deacti vation, and setting an y applicable directory n umbers (DNs) associat ed with the feature. If a SIP handset is u sed, the phone’ s ...

  • Cisco Systems OL-12397-13 - page 31

    2-31 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Number: Call-Fwd Uncondition al Activ a te/Deactivate Feature Set/Change F orwarding Number Number: Call-Fwd No Answer Activ a te/Deactivate Feature Set/Change F orwarding Number Number: Anonymous Call Rej ...

  • Cisco Systems OL-12397-13 - page 32

    2-32 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Fe atures Distinctive Ringing Distincti ve ringing uses a special ringing pattern to alert the called user of i ncoming calls from preselected telephone numbers. This is a CLASS feature and is offered to bo th bu siness ...

  • Cisco Systems OL-12397-13 - page 33

    2-33 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Features For features (such as DND) that are av ailable in dependently on the phones and the BTS 10200, you can provision either de vice to enable the feature. Caution Prior to pro visioning your system, determine ho w ...

  • Cisco Systems OL-12397-13 - page 34

    2-34 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Fe atures ...

Manufacturer Cisco Systems Category Frozen Dessert Maker

Documents that we receive from a manufacturer of a Cisco Systems OL-12397-13 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- OL-12397-13 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems OL-12397-13
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems OL-12397-13.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems OL-12397-13, service manual, brief instructions and user manuals Cisco Systems OL-12397-13. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems OL-12397-13.

A complete manual for the device Cisco Systems OL-12397-13, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems OL-12397-13 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems OL-12397-13.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems OL-12397-13 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems OL-12397-13, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems OL-12397-13, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems OL-12397-13 - which should help us in our first steps of using Cisco Systems OL-12397-13
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems OL-12397-13
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems OL-12397-13 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems OL-12397-13?

Use the form below

If you did not solve your problem by using a manual Cisco Systems OL-12397-13, ask a question using the form below. If a user had a similar problem with Cisco Systems OL-12397-13 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)