English dropdown-ico

Manual Grundig cirflexx UMS 5400 DEC

37 pages 1.41 mb
Download

Go to site of 37

Summary
  • Grundig cirflexx UMS 5400 DEC - page 1

    ǵ HIFI MICRO SYSTEM Cirflexx UMS 5400 DEC DEUTSCH ENGLISH FRANÇAIS IT ALIANO PORTUGUÊS ESP AÑOL ...

  • Grundig cirflexx UMS 5400 DEC - page 2

    2 CONTENTS ____________________________________________ 3 Set-up and safety Environmental note 4 Overview The hi-fi system controls The hi-fi system displays The back of the hi-fi system The remote control 13 Connection and preparation 16 Settings Setting the time Setting and storing radio channels Resetting the hi-fi system 19 General functions 21 ...

  • Grundig cirflexx UMS 5400 DEC - page 3

    ENGLISH 3 Please note the following information when setting up the system: The hi-fi system is designed for the playback of audio signals. Any other use is expressly prohibited. If you want to set up the hi-fi system on wall shelves or in cupboards, please ensure that it is adequately ventilated. There must be at least 10 cm of space at the side, ...

  • Grundig cirflexx UMS 5400 DEC - page 4

    4 The hi-fi system controls Controls on the fr ont General information ON/OFF Switches the hi-fi off and to standby mode. The only way to fully disconnect the hi-fi from the mains supply is to pull the plug out. O Infrared sensor for remote control signals. 0 Headphone jack for con- necting a stereo headphone set with a jack plug (3.5 mm). The loud ...

  • Grundig cirflexx UMS 5400 DEC - page 5

    ENGLISH 5 CD mode CD/ ı II Starts and pauses CD play- back. s s In MP3 and CD-DA mode: press briefly to select the next file or the next track; hold down to search for a particular passage. § In MP3 and CD-DA mode: press briefly to select the previous file or the previous track; hold down to search backwards for a particular passage. ■ Interrup ...

  • Grundig cirflexx UMS 5400 DEC - page 6

    6 Controls on the top General information PROG./ For setting the time RAND./ Ȅ manually . INTRO/ For setting the REPEA T/ ѕ switch-on timer . UBS Switches the Ultra Bass System on and off. T uner mode PROG./ Press and hold down to RAND./ Ȅ start the automatic station search; press briefly to stop the search; saves radio channels as presets. CD m ...

  • Grundig cirflexx UMS 5400 DEC - page 7

    ENGLISH 7 Using external storage media SD/MMC Card slot for inserting a memor y card (SD or MMC) (under the panel). USB USB interface for connecting a USB removeable disc ( MP3 player or USB memor y stick) under the panel. Not suitable for connecting to a PC. Controls on the bottom RESET Resets the hi-fi system. OVER VIEW __________________________ ...

  • Grundig cirflexx UMS 5400 DEC - page 8

    8 The hi-fi system displays 000:000 In standby mode: displays the time. In tuner mode: displays the preset channel. In MP3 mode: displays the total number of albums and files, and the elapsed playing time of the current file. In CD-DA mode: displays the total number of tracks, and the elapsed playing time of the current track. 000000.00 In standby ...

  • Grundig cirflexx UMS 5400 DEC - page 9

    ENGLISH 9 PROG In tuner mode: a stored radio channel is selected or played. In MP3 and CD-DA mode: a track memor y is created or played back. ɳ In tuner mode: an FM stereo channel is being received. AM Displays the first half of the day in 12-hour format. PM Displays the second half of the day in 12-hour format. kHZ In tuner mode: in combination w ...

  • Grundig cirflexx UMS 5400 DEC - page 10

    10 The back of the hi-fi system FM Antenna socket for the ANTENNA rooftop antenna or the wire antenna supplied. MW Antenna socket for ANTENNA connecting the MW frame antenna supplied. R AUX IN L Audio signal input for an external device. SPEAKER Connections for the loud- R +/– L +/– speakers supplied. R = right channel, L = left channel. AC ~ S ...

  • Grundig cirflexx UMS 5400 DEC - page 11

    ENGLISH 11 The remote control ON/OFF Switches the hi-fi system to standby mode and from standby mode to the last input source selected. ı II In MP3 and CD-DA mode: starts and pauses CD playback. 7 In MP3 and CD-DA mode: interrupts and stops playback of a CD; deletes the track memor y of a CD. 5 as 6 In tuner mode: selects stored radio channels. In ...

  • Grundig cirflexx UMS 5400 DEC - page 12

    12 DISPLA Y In tuner mode: switches the display between frequency , channel name, channel type, radio text and time/day . In CD-DA mode: switches the display between track number/elapsed playing time, remaining track playing time, total remaining running time and time/day . In MP3 mode: switches the display between file number/elapsed playing time, ...

  • Grundig cirflexx UMS 5400 DEC - page 13

    ENGLISH 13 Connecting the antennas 1 Plug the rooftop antenna cable into the » FM ANTENNA « antenna socket on the hi-fi. Note: If no rooftop antenna is available, use the auxiliar y antenna supplied. This antenna provides reasonably good reception of local FM (VHF) channels. Do not shorten the auxiliar y antenna. 2 Plug the wire frame antenna int ...

  • Grundig cirflexx UMS 5400 DEC - page 14

    14 Inserting batteries in the remote control 1 Open the batter y compartment by pushing down its lid. 2 When inserting the batteries (2 x 1.5 V , R 6/UM 3/AA), obser ve the polarity marked on the base of the batter y com- partment. Note: If your hi-fi system no longer reacts properly to remote control commands, the batteries may be flat. Always rem ...

  • Grundig cirflexx UMS 5400 DEC - page 15

    ENGLISH 15 Inserting a memor y card The hi-fi player supports SD and MMC memor y cards. 1 Switch off the hi-fi system. 2 Insert the card carefully into the card slot » SD/MMC « (under the panel on top of the hi-fi), with the contacts facing to the rear until it latches in place. Caution: – Do not use excessive force when inser ting the card. Ap ...

  • Grundig cirflexx UMS 5400 DEC - page 16

    16 Setting the time A demo programme starts when you connect the hi-fi system to the mains for the first time. T o end the demo programme switch the hi-fi system to standby by pressing » ON/OFF « briefly . Now the time and day displays will flash, indicating that they need to be set. The following settings may only be performed in standby mode. 1 ...

  • Grundig cirflexx UMS 5400 DEC - page 17

    ENGLISH 17 Setting and storing radio channels Automatic station search (ASP) The automatic station search looks for the 40 stations with the best reception and stores them. 1 Start the automatic search in tuner mode by pressing and holding down » PROG./RAND./ Ȅ «. – Display: » FM «, the frequency in rapid run-through and » PROG «. – The ...

  • Grundig cirflexx UMS 5400 DEC - page 18

    18 Storing stations as presets 1 Press » TUNER/BAND « to select the frequency band (FM or MW). 2 Press » c TUNING/ALBUM x « to select the station you want to store. 3 Press » PROG./RAND./ Ȅ « to activate the memor y function. – Display: the preset displays » 00 « and » PROG « flash. 4 Select the preset position with » 5 a « or » s 6 ...

  • Grundig cirflexx UMS 5400 DEC - page 19

    ENGLISH 19 Switching on and off 1 Switch the hi-fi system on from standby mode by pressing » ON/OFF «. – The last input source used is automatically selected. 2 Press » ON/OFF « to switch the hi-fi system to standby . – Display: » GOOD BYE « briefly , then the current time and day of the week. Note: The only way to disconnect the hi-fi sy ...

  • Grundig cirflexx UMS 5400 DEC - page 20

    20 Selecting sound effects Y ou can select from the sound effects USER, CLASSIC, POP , JAZZ and ROCK. The basic setting is USER. 1 Y ou can select sound effects using » DSC «. – Display: » USER «, » CLASSIC X «, » POP C «, » JAZZ V « or » ROCK Y «. Setting the equaliser The USER sound setting allows you to make your own personal equal ...

  • Grundig cirflexx UMS 5400 DEC - page 21

    ENGLISH 21 Selecting the TUNER input source 1 Press » FUNCTION « to select the input source. – The most recently selected channel is activated (Last Station Memor y). – Display: e.g. » FM 100.60 « or » ENERGY «. Selecting a preset channel 1 Press » BAND « to select the frequency band (FM or MW). 2 Select the channel position with » 5 a ...

  • Grundig cirflexx UMS 5400 DEC - page 22

    22 RDS station service RDS (Radio Data System) is an information system which is transmit- ted additionally by most FM stations. When the hi-fi system is receiving an RDS channel, the channel name, for example » FANTASY «, and » f « appear in the dis- play . Note: It may take some time before all the RDS information is avail- able. Searching fo ...

  • Grundig cirflexx UMS 5400 DEC - page 23

    ENGLISH 23 Programme types (PTY) 1 To view the current programme type, press » PTY « on the remote control. – Display: the current programme type, e.g. » NEWS «, » PTY « flashes. – If no programme type code is transmitted, » NO PTY « appears in the display . 2 Press » PTY « repeatedly on the remote control to select another programme ...

  • Grundig cirflexx UMS 5400 DEC - page 24

    24 The hi-fi system is suitable for music CDs bearing the logo shown here (CD-DA), and for CD-Rs and CD-RWs with audio data or MP3 formats. In MP3 mode, the terms “album” and “file” are ver y important. “Album” corresponds to a folder on a PC, “file” to a file on a PC or a CD-DA track. The hi-fi system sorts the albums, or the files ...

  • Grundig cirflexx UMS 5400 DEC - page 25

    ENGLISH 25 Inserting a CD 1 Press » OPEN/CLOSE « on the top of the hi-fi system to open the CD compartment. – Display: » OPEN «. 2 Place the CD in the compartment with the printed side facing outwards. 3 Press » OPEN/CLOSE « on the top of the hi-fi system to close the CD compartment. – Display: » CD READ « flashes. – In MP3 mode: the ...

  • Grundig cirflexx UMS 5400 DEC - page 26

    26 Selecting a different file or track 1 During playback, keep pressing » 5 a « or » s 6 « until the number of the file or track you want appears in the display . – Playback of the selected file or track starts automatically . Note: Y ou can also select files/tracks in stop mode. Searching for a passage or track within a file 1 During playbac ...

  • Grundig cirflexx UMS 5400 DEC - page 27

    ENGLISH 27 Repeating a file or a track (Repeat One) 1 Press » ı II « to star t playback. 2 Press » 5 a « or » s 6 « to select the file or track. 3 Select the repeat function by pressing » INTRO/REP ./ ѕ « until » M 1 « appears in the display . – The file or track is played back repeatedly . 4 To quit the function, press » INTRO/REP . ...

  • Grundig cirflexx UMS 5400 DEC - page 28

    28 Playing back files or tracks in random order (Random) 1 Press » ı II « to star t playback. 2 Press » PROG./RAND./ Ȅ « to select the function. – Display: » RANDOM «. – The files or tracks on the CD are played back in random order . 3 To quit this function, press » PROG./RAND./ Ȅ «. – Display: » RANDOM « disappears. – The trac ...

  • Grundig cirflexx UMS 5400 DEC - page 29

    ENGLISH 29 Creating a track memory Y ou can create a track memor y of up to 60 files on different albums (MP3) or up to 60 tracks (CD-DA) for the current CD in any order you choose and then play them back in that sequence. A file or track may be stored more than once. Programming is only possible in stop mode. Selecting and storing files (MP3 only) ...

  • Grundig cirflexx UMS 5400 DEC - page 30

    30 Checking the track memory 1 Press » PROG./RAND./ Ȅ « repeatedly when in stop mode. – The sequence of the stored files or tracks is displayed. Adding files or tracks 1 In the stop position, select the file or track with » 5 a « or » s 6 « and press » PROG./RAND./ Ȅ « to store. Deleting the track memory 1 Open the CD compartment on the ...

  • Grundig cirflexx UMS 5400 DEC - page 31

    ENGLISH 31 Playing the contents of a memory card 1 Insert the memor y card carefully into the card slot » SD/MMC « (under the panel on top of the hi-fi), with the contacts facing to the rear . 2 Switch on the hi-fi and use » FUNCTION « to select » SD CARD « as the input source. – Display: » SD READ « flashes, then MP3 mode with the total ...

  • Grundig cirflexx UMS 5400 DEC - page 32

    32 Y our hi-fi system has three timer modes: – The switch-on timer , which switches the hi-fi system on at the set time and wakes you with an alarm or music. – The reminder timer , reminding you by sounding the signal tone at a preset time. – The sleep timer , which switches the hi-fi system of f at a preset time. Switch-on timer Setting the ...

  • Grundig cirflexx UMS 5400 DEC - page 33

    ENGLISH 33 9 Press » INTRO/REP ./ ѕ « to finish the settings. – Display: » e « or » ɷ «, the day and time. – The hi-fi system switches on at the set time with the selected signal source (maximum alarm duration 90 minutes). Note: The volume of the alarm increases continually from zero onwards until an individually set maximum volume is r ...

  • Grundig cirflexx UMS 5400 DEC - page 34

    34 Reminder timer 1 Press » NAP « to select the function. – Display: » NAP 10 « (minimum time setting), » NAP « flashes. 2 Enter the reminder time (in 10 minute inter vals from 10 to 120 minutes) with » NAP «. – Display: » NAP «. – After the set time has expired, a signal tone sounds (for max. 90 minutes). – The display shows the ...

  • Grundig cirflexx UMS 5400 DEC - page 35

    ENGLISH 35 Cleaning the CD unit If the device is unable to scan CDs perfectly , use a standard, com- mercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics. To clean CDs use a lint-free cloth and wipe them in a straight line from the centre of the disc outwards. Do not use cleaning fluid for vi ...

  • Grundig cirflexx UMS 5400 DEC - page 36

    36 General information on laser devices Y our system is a CLASS 1 LASER PRODUCT . This means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances. Caution: If operating devices or methods other than those specified here are employed, it may lead to danger- ous e ...

  • Grundig cirflexx UMS 5400 DEC - page 37

    Grundig Multimedia B.V . Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www .grundig.com ...

Manufacturer Grundig Category Stereo System

Documents that we receive from a manufacturer of a Grundig cirflexx UMS 5400 DEC can be divided into several groups. They are, among others:
- Grundig technical drawings
- cirflexx UMS 5400 DEC manuals
- Grundig product data sheets
- information booklets
- or energy labels Grundig cirflexx UMS 5400 DEC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Grundig cirflexx UMS 5400 DEC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Grundig cirflexx UMS 5400 DEC, service manual, brief instructions and user manuals Grundig cirflexx UMS 5400 DEC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Grundig cirflexx UMS 5400 DEC.

Similar manuals

A complete manual for the device Grundig cirflexx UMS 5400 DEC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Grundig cirflexx UMS 5400 DEC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Grundig cirflexx UMS 5400 DEC.

A complete Grundig manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Grundig cirflexx UMS 5400 DEC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Grundig cirflexx UMS 5400 DEC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Grundig cirflexx UMS 5400 DEC, that we can find in the current document
3. Tips how to use the basic functions of the device Grundig cirflexx UMS 5400 DEC - which should help us in our first steps of using Grundig cirflexx UMS 5400 DEC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Grundig cirflexx UMS 5400 DEC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Grundig cirflexx UMS 5400 DEC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Grundig cirflexx UMS 5400 DEC?

Use the form below

If you did not solve your problem by using a manual Grundig cirflexx UMS 5400 DEC, ask a question using the form below. If a user had a similar problem with Grundig cirflexx UMS 5400 DEC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)