Manual BenQ 9H.JAV77.13E

56 pages Not applicable
Download

Go to site of 56

Summary
  • BenQ 9H.JAV77.13E - page 1

    MS512H/MS521P/TS537/MX522P/ TX538 Digital Pr ojector User Manual ...

  • BenQ 9H.JAV77.13E - page 2

    Table of contents 2 Ta b l e o f c o n t e n t s Important safety instructions ........................... 3 Introduction .......................... 7 Projector featu res .......... ............. .......... .... 7 Shipping content s ............... ............... ........ 8 Projector exte rior view ........... ............ .... 9 Controls and func ...

  • BenQ 9H.JAV77.13E - page 3

    Important safety inst ructions 3 Impor tant safety instructions Y our projector is designed and tested to meet the latest st andards for safety of information technology equipment. Howev er , to ensur e safe use of this product, it is important that you follow the instructions mentioned in th is manual and mark ed on the pr o duct. Safety Instructi ...

  • BenQ 9H.JAV77.13E - page 4

    Important safety inst ructions 4 Safety Instructions (Continued) 7. The lamp becomes extr emely hot during operation. Allow the pr ojector to cool for appro xima tely 45 minutes prior to removing t he lamp assembly for r eplacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps bey o nd the rated life could cause ...

  • BenQ 9H.JAV77.13E - page 5

    Important safety inst ructions 5 Safety Instructi ons (Continued) 13. Do not place this projector in an y of the following envir onments. - Space that is poorly ventilated or confined. Allow at least 50 cm clearance fr om walls and free flo w of air aroun d the projector . - Locations where te mperatur es ma y become excessively high, such as the i ...

  • BenQ 9H.JAV77.13E - page 6

    Important safety inst ructions 6 Safety Instructi ons (Continued) 17. Do not step on the projector or place any objects upon it. Besides pr obable ph ysical damage to the projector , doing so ma y result in accident s and possible injur y . 18. Do not place liquids near or on the projector . Liquids spill ed into the projector ma y cause it to fail ...

  • BenQ 9H.JAV77.13E - page 7

    Introduc tion 7 Intr oduction Pr ojector featur es The pr ojector offers the follo wing featur es • SmartEco™ star ts y our dynamic po wer sa ving The SmartEco™ technology offers a new way of operating the projector lamp system and sa ves lamp pow er depending on the content brightness lev el. • Longest lamp life with S martEco™ technolog ...

  • BenQ 9H.JAV77.13E - page 8

    Introduction 8 Shipping contents Carefull y unpack and verify that y ou hav e all of the items shown belo w . If any of these items are missing, please contact y our place of purchase. Standard accessories The supp lied accesso ries will be suitable fo r your region, and ma y differ from those illustrated. *The warranty card is only supplied in som ...

  • BenQ 9H.JAV77.13E - page 9

    Introduc tion 9 Pr ojector exterior view 1. External control panel (See "Contr ols and funct ions" on page 10 for details.) 2. V ent (heated air exhaust) 3. Adjuster foot 4. Focus and Zoom ring 5. V ent (cool air intake) 6. Speaker grill 7. Front IR remote sensor 8. Projec tion lens 9. A C pow er jack 10. Audio input jack Audio output jac ...

  • BenQ 9H.JAV77.13E - page 10

    Introduction 10 Contr ols and functions Pr o jector 1. F ocus ring Adjusts the focus of the pr ojected image. 2. Zoom ring Adjusts the size of the image . 3. TEMP erature warning light Lights up red if the pr ojector's temperature becomes too high. 4. MENU/EXIT T urns on the On-Scr een Displa y (OSD) menu. Goes back to pr evious OSD menu, exit ...

  • BenQ 9H.JAV77.13E - page 11

    Introduc tion 11 Remote contr ol 1. POWER T oggles the pr ojector between standby mode and on. 2. Info Shows the status information of the projector . 3. MENU/EXIT T urns on the On-Screen Displa y (OSD) menu. Goes back to previous OSD menu, exits and sa ves menu se ttings. 4. Left 5. MODE/ENTER Selects an a vailable picture setup mode. Activates th ...

  • BenQ 9H.JAV77.13E - page 12

    Introduction 12 Remote contr ol effective range The remote control m ust be held at an angle within 30 degr ees perpendicular to the projector's IR r emote control sensor(s) to function corre ctly . The distance between the remote contr ol and the sensor(s) should not exceed 8 meters (~ 26 feet). Make s ure that ther e are no obstacles betw ee ...

  • BenQ 9H.JAV77.13E - page 13

    Positioning your project or 13 P ositioning y our projector Choosing a location Y our projector is designed to be installed in one of four possible in stallation loca tions: Y our room la yout or personal prefer ence will dictate which installation locatio n you select. T ake into consideration the size and position of y our screen, the lo cation o ...

  • BenQ 9H.JAV77.13E - page 14

    Positioning your project or 14 Obtaining a pr eferr ed pr ojected image size The distance from the pr ojector lens to the screen, the zoom setting, and the video format each factors in the p rojected image size. Pr ojection dimensions Refer t o "Dimensions" on page 52 for the center of lens dimensions of this projector befor e calculating ...

  • BenQ 9H.JAV77.13E - page 15

    Connection 15 Connection When connecting a sig nal sour ce to the projector , be sure to: 1. T urn all equipment off bef ore making any connections. 2. Use the correct si gnal cables for each sour ce. 3. Ensure th e cables are firmly inserted. • In the conn ections shown below , some cables ma y not be incl uded with the projector (see "Ship ...

  • BenQ 9H.JAV77.13E - page 16

    Connection 16 • If you wish to use this connection method when the proje ctor is in standby mode, make sur e the Monitor Out function is turned on in the SYSTEM SETUP: Advanced men u. See "Standby Settings" on page 43 for details. Connecting video sour ce devices Y ou need only connect the pr ojector to a video source de vice using just ...

  • BenQ 9H.JAV77.13E - page 17

    Operation 17 Operation Star ting up the pr ojector 1. Plug the power cord into the pr ojector and into a powe r outlet. T urn on the power outlet switch (where fitted). Check that the PO WER in dicator light on t he projector lights orange after power has been applied. Please use the original accessories (e.g. pow er cord) only with the device to a ...

  • BenQ 9H.JAV77.13E - page 18

    Operat ion 18 Adjusting the pr ojected image Adjusting the pr ojection angle The projector is equipp ed with 1 adjuster foot. It changes the image heigh t and pr ojection angle . T o adjust the projector , screw the adjuster f oot to fine- tune the horizontal angle. T o ret r ac t t h e f oo t , s crew t he re ar ad j us t er fo ot in a reve rs e d ...

  • BenQ 9H.JAV77.13E - page 19

    Operation 19 Corr ecting k eystone K eystoning ref ers to the situation w here the projected imag e is noticeabl y wider at either the top or bottom. It occurs when the pr o j ector is not perpendicular to the screen. T o corr ect this, you will need to manually corr ect it following ONE of these steps. • Press / on the projector or remote contro ...

  • BenQ 9H.JAV77.13E - page 20

    Operat ion 20 Using the menus The projector is equipp ed with On-Scr een Displa y (OSD) menus for making various adjustment s and settings. The OSD screenshots below are f or refe rence on l y , and may differ fr om the actual design. Below is the ov erview of the OSD menu. The following example describes ho w to set the OSD language. 1. Press MEN ...

  • BenQ 9H.JAV77.13E - page 21

    Operation 21 Securing the pr ojector Using a security cable lock The projector has to be installed in a safe pl ace to prev ent theft. Otherwise , purchase a lock, such as the K e nsington lock, to secur e the pr ojector . Y ou can locate a K ensington lock slot on the rear side of the pr ojector . See item 18 on page 9 for details. A K ensington s ...

  • BenQ 9H.JAV77.13E - page 22

    Operat ion 22 the passw o rd r ecall procedure. See "Entering the passw ord recall pr ocedure" on page 22 for details. If you enter an incorr ect pa ssw o rd 5 times in succession, the projector will automatically shut down in a short time. Entering the passw ord re call pr ocedure 1. Press and hold AUTO on the projector or remote control ...

  • BenQ 9H.JAV77.13E - page 23

    Operation 23 Press to highlight Power On Lock and press / to select Off . Y ou will not ha ve to enter the passw ord next time when turning on the pr ojector . ii. If the password is incorr ect, the password err or message appears lasting for three seconds, and the message “INPUT P ASS W ORD” appea rs for your retry . Y ou can pr ess MENU/ EXIT ...

  • BenQ 9H.JAV77.13E - page 24

    Operat ion 24 Magnifying and sear ching for details If you need to find th e details on the projected pictur e , magnify the pictur e. Use the direction ar row k eys for na vigating the picture. • Using the r emote control 1. Press Digital Zoom+/- to display the Zoom bar . Pres s Digital Zoom+ to magnify the center of the picture. Pres s the ke y ...

  • BenQ 9H.JAV77.13E - page 25

    Operation 25 About the aspect ratio • In the pictures below , the black portions are inac tive ar eas and the white por tions are activ e areas. • OSD menus can be displayed on those unused black areas. 1. Auto : Scales an image proportionally to fit the projector's native r esolution in its horizont al or vertical width. This is suitable ...

  • BenQ 9H.JAV77.13E - page 26

    Operat ion 26 Optimizing the image Using W all Color In the situation wher e you ar e pr ojecting on to a colored surface such as a painted w all which ma y not be white, the W all Color feature can help cor rect the pr ojected picture’ s colors to pre vent possible color difference betw een the sour ce and pr ojected pictures. T o use this funct ...

  • BenQ 9H.JAV77.13E - page 27

    Operation 27 6. Press to select a menu item to be ch a nged and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details. Fine-tuning the image quality in user modes According to the detected signal type and selected pictur e mo de, some of the below functions ma y not be available. Based on your needs ...

  • BenQ 9H.JAV77.13E - page 28

    Operat ion 28 Setting a pr eferr ed color temperatur e T o set a pr eferred color temperatur e: 1. Highlight Color Temperature and select Wa rm , Normal or Cool by pr essing / on the projector or remote control. 2. Press to highlight Color Temperature F i ne Tuning an d press MODE/ ENTER . The Color Temperature Fine Tuning page appears. 3. Press / ...

  • BenQ 9H.JAV77.13E - page 29

    Operation 29 Please ref er to the illustration to the right for how the colors relate to each other . For example, if you select Red and set its range at 0, only pur e red in the projected picture will be selected. Incr easing its range will include red close to yellow and r ed close to magenta. 5. Press to highlight Saturation and adjust its value ...

  • BenQ 9H.JAV77.13E - page 30

    Operat ion 30 4. Press to highlight Timer Position and set the timer position by pressing / . 5. Press to highlight Timer Counting Dir ection and select y our desir ed counting direction b y pres sing / . 6. Press to highlight Sound Remin der and decide if you want to activate sound reminder b y pressin g / . If you select On , a double beep sound ...

  • BenQ 9H.JAV77.13E - page 31

    Operation 31 Hiding the image In order to dra w the audience's full attention to the pr esenter , you can use ECO BLANK on the projector or r emote control to hide the screen image. When this function is activated with an audio input connected, the audio can still be heard. Y ou can set the blank time in the SYSTEM SETUP: Basic > Oper ation ...

  • BenQ 9H.JAV77.13E - page 32

    Operat ion 32 symptoms. How ever , this is not to state that th is proj ector can operate under an y and all harsh or extreme conditions. Adjusting the sound The sound adjustments made as below will ha ve an effect on the projector speak er(s). Be sure y ou hav e made a correct connect ion to the pr ojector audio input. See "Connection" o ...

  • BenQ 9H.JAV77.13E - page 33

    Operation 33 Using the teaching templates The pr ojector provides sev eral preset patterns for various teaching purposes . T o activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Template and press / to select Blackboard or White board . 2. Press / to choose the pattern y ou need. 3. Press MODE/ENTER to activate the patte ...

  • BenQ 9H.JAV77.13E - page 34

    Operat ion 34 Shutting down the pr ojector 1. Pr ess POWER a nd a confirmation message will displa y prompting y ou. If you don't respond in a f ew seconds, the message will disappear . 2. Press POWER a second time. The PO WER indicator light flashes orange , the projection la mp shuts down, and the fa ns will continue to run for appr oximatel ...

  • BenQ 9H.JAV77.13E - page 35

    Operation 35 Menu operation Menu system Please note that the on-screen displa y (OSD) menus var y according to the signal type selected and the projector model y ou are usin g. Main menu Sub-menu Options 1. DISPLAY Wall Color Off/Light Yellow/Pink /L ight Green/Blue/ Blackboard Aspect Ratio Auto/Real/4:3/16:9 /16:10 Keystone Position Phase H. Size ...

  • BenQ 9H.JAV77.13E - page 36

    Operat ion 36 Main menu Sub-menu Options 4. SYSTEM SETUP: Basic Presentation Timer Timer Period 1~240 minute s Timer Display Alwa ys/3 min/2 min/1 min/Ne ver Timer Position T op-Left/Bottom-Left/T op -Right/ Bottom-Righ t Timer Counting Direction Count Down/Cou nt Up Sound Reminder On/Off On / Off Language Projector Installation Front Table/Rear Ta ...

  • BenQ 9H.JAV77.13E - page 37

    Operation 37 Note that the menu items ar e available when th e projector detects at least one valid signal. If there is no equipment connected to the pr ojector or no signal detected, limited menu items are accessible. Main menu Sub-menu Options 5. SYSTEM SETUP: Advanced High Altitude Mode On/Off Audio Settings Mute On/Off Volume Power On/Off Ring ...

  • BenQ 9H.JAV77.13E - page 38

    Operat ion 38 Description of each menu Function Description Wall Color Corre cts the pr ojected picture’ s color when the projection s urface is not white. See "Using W all Color" on page 26 for details. Aspect Ratio There are sev era l options to set the image's aspect ratio depending on your input signal source. See "Selecti ...

  • BenQ 9H.JAV77.13E - page 39

    Operation 39 Function Description 3D This projector f eatures a 3D function which enables y ou to enjoy the 3D movies, videos, and sporting events in a more r eal istic wa y by presentin g the depth of the images. Y ou need to wear a pair of 3D glasses to vi ew the 3D images. 3D Mode The default setting is Auto and the pr ojector automatically choo ...

  • BenQ 9H.JAV77.13E - page 40

    Operat ion 40 Function Description Picture Mode Pre-de fined pictur e modes are pr ovided so you can optimize your projector image set-up to su it your program type. See "Selecting a picture mode" on page 26 for details. Reference Mode Selects a picture mode that best suits y our need for the image quality and further fine-tune the image ...

  • BenQ 9H.JAV77.13E - page 41

    Operation 41 Function Description Presentation Timer Reminds the presenter to finis h the pres entation within a certain time frame. See "Setting the presentation timer" on page 29 for details. Language Sets the language for the On-Sc reen Displa y (OSD) menus. See "Using the menus" on page 20 for details. Projector Installation ...

  • BenQ 9H.JAV77.13E - page 42

    Operat ion 42 Function Description Panel Key Lock Disables or enables all panel k ey functions except POWER on the projector and k eys on the r emote control. See "Locking contr ol ke ys" on page 31 for deta ils . Background Color Sets the background color f or the projector . Splash Screen Allows you to select which logo screen will disp ...

  • BenQ 9H.JAV77.13E - page 43

    Operation 43 Function Description Closed Caption Closed Caption Enable Activates th e function b y selecting On when the selected input signal carries closed captions. • Captions: An on-screen displa y of the dialogue, narration, and sound effects of TV programs an d videos that are close d captione d (usually marked as "CC" in TV listi ...

  • BenQ 9H.JAV77.13E - page 44

    Operat ion 44 Function Description Current System Status Source Shows the curr ent signal sour ce. Picture Mode Shows the selected mode in the PICTURE menu. Lamp Mode Shows the curr ent lamp mode . Resolution Shows the native r esolution of the input signal. 3D Format Shows the curr ent 3D mode. Color System Shows input syst em format. Equivalent L ...

  • BenQ 9H.JAV77.13E - page 45

    Maintenance 45 Maintenance Car e of the projector Y our projector needs little maintenance. The on ly thing y ou need to do on a r egular basis is to keep th e lens and case clean. Ne ver rem ove a ny pa r ts o f t he p roj ec to r . Contact your dealer if other parts need rep l ac in g. Cleaning the lens Clean the lens whenev er you notice dirt or ...

  • BenQ 9H.JAV77.13E - page 46

    Maintenance 46 Lamp information Getting to know the lamp hour When the projector is in operation, the durati on (in hours) of lamp usage is automatically calculated by the built-in timer . T otal (equivalent) lamp hour = 2.22 x (hours used in Normal mode) + 1.67 x (hours used in Economic mode) + 1.54 x (hours used in SmartEco mode) + 1.00 x (hours ...

  • BenQ 9H.JAV77.13E - page 47

    Maintenance 47 Timing of r eplacing the lamp When the Lamp indicat or lights up r ed or a message appears suggesting i t is time to replace the lamp , please consult your dealer or go to http://lamp .benq.com befor e insta lling a new lamp . An old lamp may cause a malfunct ion in the pr ojector and in some instances the lamp ma y explode. The LAMP ...

  • BenQ 9H.JAV77.13E - page 48

    Maintenance 48 Replacing the lamp T urn the power off and disconnect the projec tor fr o m the power outlet. Please contact service personnel for changing the lamp or visit http://www .BenQ .com . Resetting the lamp tim er After the star tup logo , open the On-S creen Displa y (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Pr ...

  • BenQ 9H.JAV77.13E - page 49

    Maintenance 49 Indicators Light Status & Description Po w e r e v e n t s Orange Off Off Stand-by mode Green Flashing Off Off P owering up Green Off Off Normal operation Orange Flashing Off Off Normal power -down cooling Red Off Off Download Green Off Red CW star t fail Red Flashing Off Off Scaler shutdown fail (data abort) Green Off Off Burn-i ...

  • BenQ 9H.JAV77.13E - page 50

    Troubleshooting 50 T r oubleshooting The projector does not turn on. No picture Blurr ed image Remote contr ol does not work The passw ord is incorrect Cause Remedy There is n o pow er from the p ower cord. Plug the po wer cor d into the A C power jack on the pro jector , and plug the po wer cor d into the power outlet. If the power outlet has a sw ...

  • BenQ 9H.JAV77.13E - page 51

    Specificatio ns 51 Specifications Pr ojector specifications All specifications ar e subject to change without notice . Optical Resolution (MS512H/MS521P/TS537) 800 x 600 SVGA (MX522P/TX538 ) 1024 x 768 XGA Display system 1-CHIP DMD Lens F/Number F = 2.56 ~ 2. 8, f = 21 ~ 23.1 mm Lamp 190 W lamp Electrical Power supp ly AC100–240V , 2.7 A, 50-60 H ...

  • BenQ 9H.JAV77.13E - page 52

    Specifications 52 Dimensions 283 mm (W) x 95 mm (H) x 222 mm (D) Ceiling mount installation 283 222 95 Unit: mm 59.5 54.46 59.5 54.46 207.54 71.75 201.55 71.65 4.93 105.77 625.86 128.9 81.9 577.7 537.9 44.94 104.42 225.4 Ceiling Mount scr ew: M4 (Max L = 25 mm; Min L = 20 mm) Unit: mm ...

  • BenQ 9H.JAV77.13E - page 53

    Specificatio ns 53 Timing char t Suppor ted timing for PC input • *Supported timing for 3D signal in Frame Sequential , Top Bottom and Side by Side formats. **Suppor ted timing for 3D signal in Frame Sequential fo rmat . ***Supported timing for 3D signal in Top Bottom and Side by Side formats. Resolution Mode Ve r t i c a l Fre qu e nc y (Hz) Hor ...

  • BenQ 9H.JAV77.13E - page 54

    Specifications 54 • The timings showing above ma y not be su pported due to EDID file and V GA graphic card limitations. It is possible that some timings cannot be chosen. Suppor ted timing for HDMI (HDCP) input • *Supported timing for 3D signal in Frame Sequential , Top Bottom and Side by Side formats. **Suppor ted timing for 3D signal in Fram ...

  • BenQ 9H.JAV77.13E - page 55

    Specificatio ns 55 *Suppor ted timing for 3D signal in Frame Sequential form at. **Supported timing for 3D signal in Frame Packing , Top Bottom and Side by Side formats. ***Suppor ted timing for 3D signal in Frame Sequential , Frame Packing , Top Bottom and Side by Side formats. ****Supported timing for 3D signal in Side by Side forma t. *****Suppo ...

  • BenQ 9H.JAV77.13E - page 56

    Warranty and Co pyright information 56 W arranty and Cop yright information Limited warranty BenQ warrants this pr oduct against any de fects in material an d workman ship , under normal usage and storag e. Proof of pur chase date will be required with an y warranty claim. In the ev ent this product is found to be defective within the war r an ty p ...

Manufacturer BenQ Category Video projector

Documents that we receive from a manufacturer of a BenQ 9H.JAV77.13E can be divided into several groups. They are, among others:
- BenQ technical drawings
- 9H.JAV77.13E manuals
- BenQ product data sheets
- information booklets
- or energy labels BenQ 9H.JAV77.13E
All of them are important, but the most important information from the point of view of use of the device are in the user manual BenQ 9H.JAV77.13E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals BenQ 9H.JAV77.13E, service manual, brief instructions and user manuals BenQ 9H.JAV77.13E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product BenQ 9H.JAV77.13E.

Similar manuals

A complete manual for the device BenQ 9H.JAV77.13E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use BenQ 9H.JAV77.13E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of BenQ 9H.JAV77.13E.

A complete BenQ manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual BenQ 9H.JAV77.13E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the BenQ 9H.JAV77.13E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the BenQ 9H.JAV77.13E, that we can find in the current document
3. Tips how to use the basic functions of the device BenQ 9H.JAV77.13E - which should help us in our first steps of using BenQ 9H.JAV77.13E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with BenQ 9H.JAV77.13E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of BenQ 9H.JAV77.13E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning BenQ 9H.JAV77.13E?

Use the form below

If you did not solve your problem by using a manual BenQ 9H.JAV77.13E, ask a question using the form below. If a user had a similar problem with BenQ 9H.JAV77.13E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)