Manual Canon HF M32

210 pages 5.13 mb
Download

Go to site of 210

Summary
  • Canon HF M32 - page 1

    PUB. DIE-0367-000 HD Camcorder Instruction Manual Y ...

  • Canon HF M32 - page 2

    2 Introduction Important Usage Instructions WARNING! TO REDUCE THE RISK OF FIRE OR EL ECTRIC SHOCK, DO NO T EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK AND T O REDUCE ANNO YING INTERFERENCE, USE THE RECO MMENDED ACCESSORIES ONL Y . COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infr ...

  • Canon HF M32 - page 3

    3 The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. CAUTION: • Danger of explosion if the wrong type of batte ries are attached. Use only the same type of batteries. • Do not expose batteries or product to excess ive heat such as the inside of a car under ...

  • Canon HF M32 - page 4

    4 In these safety instructions the word “p roduct” refers to the Canon HD Camcorder VIXIA HF M30 A / VIXIA HF M31 A / VIXIA HF M 32 A / VIXIA HF M300 A and all its accessories. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water . 6 Clean only with dry clot ...

  • Canon HF M32 - page 5

    5 21 Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table. The pro duct may fall, causing seriou s injury to a child or adult, and serious da mage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfac es may cause the product and cart combination ...

  • Canon HF M32 - page 6

    6 30 Damage Requiring Service — Disconnect this product from the wall outlet and all po wer sources including battery , and refer servic ing to qualified ser vice personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into, the product. c. If the p ...

  • Canon HF M32 - page 7

    7 The serial number of this product can be found at the battery attach- ment unit of the camcorder . Write down the number and other informa- tion here and re tain this book as a permanent record of your purchase to aid identification in case of theft. Model Name: VIXIA HF M30 A / VIXIA HF M31 A / VIXIA HF M32 A / VIXIA HF M300 A Date of Purchase: ...

  • Canon HF M32 - page 8

    8 Exciting F eatures and New Functions High-Definition Video Y our camcorder’ s full high-definition image sensor (Full HD CMOS) captures video at a resolution of 1,920 x 1,080 pixels 2 . Videos are then r ecorded in the memory in high definition, using A VCHD specifications 3 . With your new HD camcorder , capturing the special moments in your l ...

  • Canon HF M32 - page 9

    9 Smart AUT O ( 0 43) Smart AUTO automatically selects the best scene mode for the scene you want to shoot. Y ou get spectacular recordings every time without worrying about settings. Video Snapshot ( 0 68) Shoot or capture short scenes and arrange them into a video clip set to your favorite background music. Face Detection ( 0 66) Image Stabilizat ...

  • Canon HF M32 - page 10

    10 Enjoying your Recordings on Other Devices Eye-Fi SD AVCHD MPEG-2 SD-Video Connect the camcorder to an HDTV ( 0 124) Connect the camcorder to the optional DW-100 DVD Burner ( 0 131, 135) AVCHD discs 4 Photo DVDs Play video directly from your recorded memory card AVCHD-compatible HDTVs and digital recorders with a card slot compatible with the typ ...

  • Canon HF M32 - page 11

    11 ...

  • Canon HF M32 - page 12

    12  Table of contents  Introduction 8 Exciting Features and New Functions 16 About this Manual 18 Getting to Know the Camcorder 18 Supplied Accessories and CD-ROMs 20 Names of Parts  Preparations 23 Getting Started 23 Charging the Battery Pack 26 Preparing the Accessories 28 Adjusting the Position and Brightness of the LCD Screen 30 Basic ...

  • Canon HF M32 - page 13

    Table of contents  13  Dual Shot Mode 42 Basic Recording 42 Shooting Video and T aking Photos in Dual Shot Mode 43 About the Smart AUTO mode 46 Zooming 47 Quick Start Function  V ideo 49 Basic Playback 49 Playing Back the Video 52 The Index Selection Screen: Selecting the Content to Play Back 54 3D Flip View 55 Narrowing Down the Scenes Sh ...

  • Canon HF M32 - page 14

    14  Table of contents 83 Using the Mini Advanced Shoe 84 Using an External Microphone 85 Using a Zoom Remote Controller 87 Selecting the Playback Starting Point 89 Playing Back Scenes Set to Background Music 93 Onscreen Displays and Data Code 94 Playlist and Scene Operations 94 Editing the Playlist: Adding, Deleting, Moving and Playing Back 96 C ...

  • Canon HF M32 - page 15

    Table of contents  15  External Connections 121 T erminals on the Camcorder 122 Connection Diagrams 124 Playback on a TV Screen 126 Saving and Sharing Y our Recordings 126 Copying Recordings to a Memory Car d 128 Saving Recordings on a Computer 131 Saving Movies onto High-Definition Discs (A VCHD/Blu-ray Discs) 135 Saving Movies onto Standard ...

  • Canon HF M32 - page 16

    16  Introduction About this Manual Thank you for purchasing the Canon VIXIA HF M32 / VIXIA HF M31 / VIXIA HF M30 / VIXIA HF M300. Please read this manual car efully before you use the camcor der and retain it for future r eference. Should your camcorder fail to operate corr ectly , refer to T roubleshooting ( 0 168). Conventions Used in this Man ...

  • Canon HF M32 - page 17

    Introduction  17 Self Timer • n appears. • Repeat, selecting [ B Off], to turn off the self timer . mode: In record pause mode, press g . The camcorder starts recording after a 10-second countdown*. The countdown appears on the screen. mode: Press j , first halfway to activate the autofocus and then fully . The camcorder will record the phot ...

  • Canon HF M32 - page 18

    18  Introduction Getting to Know the Camcorder Supplied Accessories and CD-ROMs The following accessories are supplied with the camcor der: X CA-570 Compact Power Adapter (incl. power cord) BP-808 Battery Pack W X WL-D89 Wireless Controller (incl. CR2025 lithium button battery) STV-250N Stereo Video Cable W Y ello w • Red • White plugs X CTC ...

  • Canon HF M32 - page 19

    Introduction  19 The following CD-ROMs and software ar e supplied with the camcorder: • PIXELA Application - Disc 1 CD-ROM* and ‘PIXELA Applications’ Installation Guide - ImageMixer 3 SE T ransfer Utilities – Software for saving and transferring movies and music file s you can use as background music. • PIXELA Application - Disc 2 CD-R ...

  • Canon HF M32 - page 20

    20  Introduction Names of Parts 1 DISP . (onscr een display) button ( 0 93)/ BA TT . INFO button ( 0 167) 2 2 (camera/play) button ( 0 31) 3 Speaker ( 0 51) 4 Memory card slot cover 5 Memory card slot ( 0 38) 6 MIC terminal ( 0 85) 7 AV O U T t er m in a l ( 0 121, 123)/ X (headphones) terminal ( 0 82) 8 BA TTERY RELEASE switch ( 0 24) 9 ACCESS ...

  • Canon HF M32 - page 21

    Introduction  21 A l Mini advanced shoe ( 0 83) S q Mode switch ( 0 31) S a PHOTO button ( 0 42, 104) S s Zoom lever ( 0 46) S d VIDEO SNAP (video snapshot) button ( 0 68) S f POWER button S g ON/OFF (CHG) (charge) indicator: Green – ON Orange – Standby ( 0 47) Red – Charging ( 0 23) S h Remote sensor ( 0 26) S j LCD touch screen ( 0 28, 3 ...

  • Canon HF M32 - page 22

    22  Introduction Wireless Controller WL-D89 D s Serial number D d T ripod socket ( 0 187) 1 ST ART/STOP button ( 0 42, 58) 2 b (index selection) button ( 0 52) Press and hold for mor e than 2 seconds to switch between shooting and playback mode. 3 MENU button ( 0 33, 151) 4 DISP . (onscr een display) button ( 0 93) 5 SET button 6 B (stop) button ...

  • Canon HF M32 - page 23

    Preparations  23 Preparations This chapter describes basic operations, such as using the touch panel, navigating the menus, and first time settings to help you learn more about your camcorder . Getting Started Charging the Battery Pack The camcorder can be power ed with a battery pack or directly using the compact power adapter . The first time ...

  • Canon HF M32 - page 24

    24  Preparations 5 Charging will start when the camcorder is turned off. • If the camcorder was on, the gr een ON/OFF (CHG) indicator will go out when you turn off the camcorder . After a moment, the ON/OFF (CHG) indicator will start flashing in red (battery pack charging). The red ON/ OFF (CHG) indicator will go out when the battery pack is f ...

  • Canon HF M32 - page 25

    Preparations  25 • T o prevent equipment breakdowns and excessive heating, do not con- nect the supplied compact power adapter to voltage converters for overseas travels or special power sour ces such as those on air craft and ships, DC-AC inverters, etc. NOTES • The battery pack will be charged only when the camcorder is off. • If remaini ...

  • Canon HF M32 - page 26

    26  Preparations Preparing the Accessories Wireless Controller First, insert the supplied CR2025 lithium button battery into the wire- less controller . 1 Press the tab in the direction of the arrow and pull out the battery holder . 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder . To use the wireless co ...

  • Canon HF M32 - page 27

    Preparations  27 Grip Belt and Straps Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger , and the g button with your thumb. To remove the grip belt 1 Lift the padded handgrip's flap and detach the strap from the V elcro pad. 2 Pull the strap to remove it first fr om the front bracket on t ...

  • Canon HF M32 - page 28

    28  Preparations To attach an optional wrist strap Pass the attaching end of the wrist strap through the r ear bracket on the camcorder , thread the wrist strap through the loop and fasten. Y ou can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection. To attach an optional shoulder str ...

  • Canon HF M32 - page 29

    Preparations  29 NOTES • About the LCD screen: The screen is pr oduced using extremely high-pre- cision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less th an 0.01% of the pixels may occasion- ally misfire or appear as black, r e d, blue or green dots. This has no effect on the r ecorded image and ...

  • Canon HF M32 - page 30

    30  Preparations Basic Operation of the Camcorder Using the T ouch Screen The control buttons and menu items that appear on the touch scr een change dynamically depending on the operating mode and the task you are performing. With the intuitive touch scr een interface you have all the controls at your fingertips. To u c h Press firmly on an elem ...

  • Canon HF M32 - page 31

    Preparations  31 Operating Modes Recording When recor ding video or photos, the camcorder’ s operating mode is determined by the position of the mode switch and the onscreen con- trol buttons. * The mode icon displayed will change accordi ng to the optimal mode selected by the Smart AUTO function ( 0 43). Playback Press the camera/play button ...

  • Canon HF M32 - page 32

    32  Preparations NOTES • When switching to a playback mode, the memory selected for playback will be the same currently used for r ecording. • Y ou can also press and hold B on the wireless contr oller for more than 2 seconds to switch betwee n recor ding and playback mode. Using the Menus Many of the camcorder’ s functions can be adjusted ...

  • Canon HF M32 - page 33

    Preparations  33 The Setup Menus 1 or mode only: T ouch [FUNC.] 2 T ouch [MENU] to open the setup menus. 3 T ouch the ta b of the desired menu. 4 Drag your finger up and down along the scroll bar to bring the setting you want to change into the orange selection bar . Menu items not available appear grayed out. 5 When the desired menu item is in ...

  • Canon HF M32 - page 34

    34  Preparations First Time Settings Setting the Date and Time Y ou will need to set the date and time of the camcorder befor e you can start using it. The [Date/Time] screen will appear automatically when the cam- corder’ s clock is not set. When the [Date/Time] screen appears, the year will be selected. 1 T ouch a field you want to change (y ...

  • Canon HF M32 - page 35

    Preparations  35 Changing the Language The default language of the camcorder is English. Y ou can set it to one of 22 other languages. * Only when performing the procedure in a recor ding mode. NOTES • Some control buttons, such as [ZOOM], [FUNC.] or [MENU], will appear in English regard less of the language selected. Changing the Time Zone Ch ...

  • Canon HF M32 - page 36

    36  Preparations Using a Memory Card Memory Cards Compatible for Use with the Camcorder Y ou can use commerc ially available Secur e Digital (SD) car ds with this camcor der . However , depending on the memory car d, you may not be able to recor d movies. Refer to the table below . As of May 2010, the movie recordin g function has be en tested u ...

  • Canon HF M32 - page 37

    Preparations  37 SDXC Memory Cards As of May 2010, SDXC memory cards have been tested to work under Windows 7. For details on whether your computer's operating system is SDXC-com patible, check with your computer's manufa cturer . IMPORT ANT • If you use an SDXC memory card with a computer OS that is not SDXC- compatible, you may be ...

  • Canon HF M32 - page 38

    38  Preparations Inserting and Removing a Memory Card Make sure to initialize ( 0 40) all memory car ds before using them with this camcorder . 1 T urn off the camcorder . Make sure the ON/OFF (CHG) indicator is off. 2 Open the memory card slot cover . 3 Insert the memory card straight, with the label facing up, all the way into the memory card ...

  • Canon HF M32 - page 39

    Preparations  39 POINTS T O CHECK • Be sure you understand the information pr ovided in Eye-Fi Cards ( 0 37) before using an Eye-Fi car d. * When selecting the memory , you can check the approximate available r ecording time/number of photos, based on currently used settings. NOTES • Sel ec t t o re co rd m o vie s in th e built-in memory if ...

  • Canon HF M32 - page 40

    40  Preparations NOTES • Any of the following actions will deactivate the relay r ecording function: - T urning off the camcorder . - Opening the memory card slot cover . - Changing the position of the mode switch. - Changing the camcorder's operating mode. - Selecting the memory card as the memory for recor ding movies. Initializing the ...

  • Canon HF M32 - page 41

    Preparations  41 * T ouch this option if you want to physically erase all the data ra ther than just clear the file allocation table of the memory . ** If you selected the [Complete Initializati on] option, you can touch [Cancel] to cancel the initialization while it is in progr ess. A ll recordings will be er ased and the memory can be used wit ...

  • Canon HF M32 - page 42

    42  Dual Shot Mode Dual Shot Mode This chapter covers how to easily recor d video and photos in the all-automatic Dual Shot mode, and how to use basic shoot- ing functions like zoom and Quick Start. T o enjoy full access to menus and more advanced functions, r efer to the relevant chapters for video ( 0 58) and photos ( 0 104). Basic Recording S ...

  • Canon HF M32 - page 43

    Dual Shot Mode  43 When you have finished recording 1 Make sure that the ACCESS indicator is of f. 2 T urn off the camcorder . 3 Close the LCD panel. About Dual Shot • Only the following functions are available in mode. -Z o o m ( 0 46). - Quick Start ( 0 47). - Video snapshot ( 0 68). - Advanced image stabilization modes ( 0 64) to shoot vide ...

  • Canon HF M32 - page 44

    44  Dual Shot Mode IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory . - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcor der . - Do not change the camcorder’ s operating mo ...

  • Canon HF M32 - page 45

    Dual Shot Mode  45 • Be sure to save your r ecordings regularly ( 0 126), especially after making important recor din gs. Canon shall not be liable for any loss or corruption of data. • When recor ding photos on an Eye-Fi card, photos will be uploaded automatically if you are within the ra nge of a configur ed network. Always verify that Eye ...

  • Canon HF M32 - page 46

    46  Dual Shot Mode Zooming There ar e three ways you can zoom in and out: using the zoom lever on the camcorder , using the zoom buttons on the wireless controller or using the zoom controls on the touch scr een. In addition to the 15x optical zoom*, in mode, you can tur n on the 300x digital zoom with the 7 8 [Digital Zoom] setting. * When [Ima ...

  • Canon HF M32 - page 47

    Dual Shot Mode  47 2 T ouch the zoom controls to operate the zoom. T ouch anywhere within the Q area to zoom out or anywhere within the P ar ea to zoom in. T ouch closer to the center for a slow zoom; touch closer to the e / d icons for faster zooms. 3T o u c h [ a ] to hide the zoom controls. NOTES • Keep at least 1 m (3.3 ft.) away from the ...

  • Canon HF M32 - page 48

    48  Dual Shot Mode 2 When you wish to resume r ecording, open the LCD panel. The ON/OFF (CHG) indicator turns back green and the camcorder is ready to r ecord. IMPORT ANT • Do not disconnect the power source during standby mode (while the ON/OFF (CHG) indicator is lit in orange). NOTES • The camcorder will not enter standby mode if the LCD p ...

  • Canon HF M32 - page 49

    Video  49 Video This chapter covers functions related to movies, including play- back, advanced shooting, advanced functions and playlist and scene operations. For details about basic video shooting, refer to Dual Shot Mode ( 0 42). Basic Playback Playing Back the Video 1P r e s s S . Y ou can also press and hold B on the wireless contr oller fo ...

  • Canon HF M32 - page 50

    50  Video 4 T ouch the desired scene to play it back. • Playback will start from the scene selected and continue until the end of the last scene in the index screen. • T ouch the screen during playback to display the playback controls. A Memory being read B Index screen curr ently displayed C Drag your finger left for the next index page* D ...

  • Canon HF M32 - page 51

    Video  51 During playback pause: A Stop the playback. B Jump to the beginning of the scene. Double-tap to jump to the previous scene. C Pause the playback. D Drag your finger left and right along the volume bar to adjust the volume. E T ouch anywhere else to hide the playback controls. F Fast playback backward*. G Jump to the next scene. H Fast ...

  • Canon HF M32 - page 52

    52  Video IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcor der . - Do not change the camcorder’ s operating mode. • Y ou may not be able to pl ...

  • Canon HF M32 - page 53

    Video  53 Options NOTES • Fast/slow playback modes are not available for scenes converted to standard definition. Scenes in the [SD Scenes] index scr eens can only be played back at normal speed. [Original] Original movies as you recor ded them. [Playlist] Scenes that were added to the playlist ( 0 94) and may have been rearranged to your liki ...

  • Canon HF M32 - page 54

    54  Video 3D Flip View 3D Flip View is a fun way to display your video r ecordings (original scenes) in a 3D layout, organized by r ecording date. In any index screen, touch [ b ] 8 [3D Flip View]. During single photo view , touch the screen once to display the contr ols then touch [ Q ] to open the [Photos] index screen. A Drag your finger up a ...

  • Canon HF M32 - page 55

    Video  55 Narrowing Down the Scenes Shown in the Index Scr een From the [Original] index scr een, you can narrow down the scenes shown, leaving only scenes that were r ecorded on a specific date or only those scenes in which people's faces were detected. Showing Only Scenes that Contain People’ s Faces This will narrow down the scenes sho ...

  • Canon HF M32 - page 56

    56  Video 2 Open the calendar screen. • Dates that contain scenes (that i s, movies were r ecorded on that date) appear in black against a silver background. Dates without recor dings appear grayed out. •T o u c h [ y ] or [ A ] to jump to the previous/next calendar month that contains recor dings. 3 T ouch the desired date. The selected dat ...

  • Canon HF M32 - page 57

    Video  57 3 T ouch on the individual scenes you want to delete. • A checkmark O will appear on scenes selected. T ouch a selected scene again to remove the checkmark. • T o select all the scenes at on ce: T ouch [Select All] instead of touching individual scenes. (Remove in advance any checkmarks from scenes you may have selected individuall ...

  • Canon HF M32 - page 58

    58  Video Advanced Functions Shooting Video in y Manual Mode When the mode switch is set to y (Manual mode), you can enjoy full access to the menus and manually ad just the exposure, focus, white balance and many more of the camcor der's settings to your prefer- ence. Even in mode, though, the camcorder can help you with the settings. For e ...

  • Canon HF M32 - page 59

    Video  59 NOTES • The zoom, Quick Start function, power saving modes, etc. operate the same way in mode as in mode. For details, refer to Dual Shot Mode ( 0 42). Selecting the Video Quality (Recording Mode) The camcorder of fers 5 recording modes. Changing the r ecording mode will change the recor ding time available on the memory . Select MXP ...

  • Canon HF M32 - page 60

    60  Video Special Scene Recording Programs Recording in a very bright ski r esort or capturing the full colors of a sunset or a fireworks display becomes as easy as selecting a Special Scene recor ding program. Approximate r ecording times  Default value 1 Recorded in 1,920 x 1,080 r esolution. Mo vies recorded using other r ecording modes ar ...

  • Canon HF M32 - page 61

    Video  61 Options (  Default value) [ F Port rait]  The camcorder uses a large aper- ture, to achieve a sharp focus on the subject while blurring the background. [ G Sports] T o record sports scenes such as tennis or golf. [ q Night Scene] T o record nightscapes with lower noise. [ I Snow] T o record in bright ski resorts without the subje ...

  • Canon HF M32 - page 62

    62  Video NOTES •[ F Portrait]/[ G Sports]/[ I Snow]/[ J Beach]: The picture may not appear smooth during playback. •[ F Portrait]: The blur effect of the backgr ound increases the more you zoom in ( P ). •[ I Snow]/[ J Beach]: The subject may become overexposed on cloudy days or in shaded places. Check the image on the screen. •[ p Low ...

  • Canon HF M32 - page 63

    Video  63 recordings while on land, we r ecommend using the [ s Surface] recording pr ogram. - T o switch the recording pr ogram between [ r Underwater] and [ s Surface] while the camcorder is in the waterpr oof case, tur n on the camcorder while holding j pr essed down. - p will appear on the screen when the camcor der's temperature become ...

  • Canon HF M32 - page 64

    64  Video To change the frame rate Advanced Image Stabilization The image stabilizer reduces camcor der blur (blur due to the cam- corder moving) so you can get nice, stable shots. Select the image sta- bilization mode according to the shooting conditions. In mode: Options (  Default value in mode) Operating modes: [FUNC.] 8 [MENU] 8 8 8 [Fra ...

  • Canon HF M32 - page 65

    Video  65 NOTES • If the degree of camcor der shake is too high, the image stabilizer may not be able to fully compensate. • Powered IS is not available in mode. • For surveying and following shots, when you pan the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [ P Dynamic] or [ Q Standard]. Pre-Re ...

  • Canon HF M32 - page 66

    66  Video 1 Activate the pre-r ecording function. • d appears. • Repeat, selecting [ B Off], to turn off pr e-recording. 2P r e s s g . The scene recor ded in the memory will start 3 seconds before g was pressed. NOTES • While pre-recor ding is activated, th e camcorder will not emit any notifi- cation sounds. • The camcorder will not re ...

  • Canon HF M32 - page 67

    Video  67 POINTS T O CHECK • Select a recor ding program other than [ q Night Scene], [ p Low Light], [ M Fireworks] or [ r Underwater]. By default, face detection is activated. If the function was turned off, per- form the following procedur e to tur n it on. T o select the main subject If there is mor e than one person in the picture, the ca ...

  • Canon HF M32 - page 68

    68  Video T ouch & T rack When recor ding people, face detection will track the main subject and keep it always in focus. But also when recor ding other moving subjects such as your pet, a moving vehicle or people not facing the camera directly , you can use T ouch & T rack to keep your subject in focus at all times. 1 Make sure face det ...

  • Canon HF M32 - page 69

    Video  69 1P r e s s z . • A blue border appears on the screen. • Press z again to r etur n to normal video recor ding mode. 2P r e s s g . • By default, the camcorder records for about 4 seconds (the blue frame serves as a visual progr ess bar) and then automatically returns to recor d pause mode. Y ou can change the length of video snaps ...

  • Canon HF M32 - page 70

    70  Video To fade in/out Press g in r ecord pause mode ( M ) to start recor ding with a fade in. Press g while r ecording ( N ) to fade out and pause the recor ding. Options (  Default value) NOTES • When you apply a fader , not only the picture but also the sound will fade in or out. When you apply an effect, the sound will be r ecorded no ...

  • Canon HF M32 - page 71

    Video  71 Options (  Default value) NOTES •[ B Shutter -Pri. AE]: - On screen only the deno minator is displayed – [ B 250] indicates a shutter speed of 1/250 second, etc. - In mode, when the frame rate is set to [ E PF24], the shutter speeds available will be the followi ng: 1/6, 1/12, 1/24, 1/48, 1/60, 1/100, 1/250, 1/500, 1/1000 and 1/ ...

  • Canon HF M32 - page 72

    72  Video Shutter Speed and Aperture V alue Guidelines X With slower shutter speed you can add a nice motion blur and sense of movement. With faster shutter speeds you can “freeze the action” for powerful im ages of moving subjects. W X With small aperture values only the subject is in focus and the background is softly blurred. Great for po ...

  • Canon HF M32 - page 73

    Video  73 Manual Exposure Adjustment At times, backlit subjects may appear too dark (underexposed) or sub- jects under very strong lights may appear too bright or glaring (over ex- posed). T o correct this, you can adjust the exposure manually or use the T ouch AE function to automatically set the optimal exposure for the subject you select. Thi ...

  • Canon HF M32 - page 74

    74  Video NOTES • If the recor ding program is change d during exposure lock, the cam- corder will r eturn to automatic exposure. • When shooting subjects with a stro ng light sour ce behind them, the camcorder automatically corr ects for the backlight. Y ou can tur n off the automatic backlight correction with the 7 / 8 8 [Auto Backlight Co ...

  • Canon HF M32 - page 75

    Video  75 POINTS T O CHECK • Adjust the zoom before you start the pr ocedure. 1 Open the manual focus screen. 2 T ouch a subject that appears inside the X frame. • The T ouch AF mark ( P ) will flash and the focusing distance will be adjusted automatically . Y ou have the option to further adjust the focus manually as necessary . • Y ou ca ...

  • Canon HF M32 - page 76

    76  Video White Balance The white balance function helps you to accurately repr oduce colors under differ ent lighting conditions so that white objects will always look truly white in your recor dings. POINTS T O CHECK • Select a recor ding program other than the Special Scene recor ding pro- grams. * When you select [ g Custom WB], s et the c ...

  • Canon HF M32 - page 77

    Video  77 NOTES • When you select the custom white balance: -S e t 7 8 [Digital Zoom] to [ B Off]. - Reset the white balance when you ch ange locations or the lighting or other conditions change. - Depending on the light source, g may keep flashing. The result will still be better than with [ Y Automatic]. • Custom white balance may provide ...

  • Canon HF M32 - page 78

    78  Video Options (  Default value) Mini Video Light Y ou can tur n on the mini video light to shoot video or take photos in dark places. POINTS T O CHECK • Select a recor ding program other than [ r Underwater] or [ s Surface]. • Y appears on the screen. • Repeat, selecting [ B Off], to turn off the mini video light. [ U Off]  Recor ...

  • Canon HF M32 - page 79

    Video  79 NOTES • We r ecommend not using the mini video light while the optional W ide- converter or T ele-converter is att ached; its shadow can appear on the screen. Using an External Video Light Y ou can use the optional VL-5 Video Light or VFL-2 Video Flash Light when you need a video light that is stronger than the built-in mini video li ...

  • Canon HF M32 - page 80

    80  Video mode: Press j , first halfway to activate the autofocus and then fully . The camcorder will r ecord the phot o after a 10-second countdown*. The countdown appears on the screen. * 2 seconds when using the wireless controller . NOTES • Once the countdown has begun, any of the following actions will cancel the self timer . - Pressing g ...

  • Canon HF M32 - page 81

    Video  81 2T o u c h a n d h o l d [ y ] or [ A ] to adjust the audio recording level as necessary . As a guideline, adjust the audio recor ding level so that the audio level meter will go to the right of the -12 dB mark (yellow area) only occasionally . 3T o u c h [ a ] to lock the audio recor ding level at the current level. To display the aud ...

  • Canon HF M32 - page 82

    82  Video Using Headphones Use headphones for playback or to check the audio level while recor d- ing. The headphones are connected to the A V OUT/ X terminal, which is used for both the headphones and the audio/video output. Before connecting the headphones, follow the procedur e below to change the function of the terminal from A V output to X ...

  • Canon HF M32 - page 83

    Video  83 IMPORT ANT • When using headphones, make sure to lower the volume to an appr o- priate level. • Do not connect the headphones to the A V OUT/ X terminal if the J icon does not appear on the screen. The noise output in such case may be harmful to your hearing. NOTES • Use commercially available headphones with a ∅ 3.5 mm minijac ...

  • Canon HF M32 - page 84

    84  Video NOTES • Accessories designed for the Advanced Accessory Shoe cannot be used with this camcorder . Look for video accessories bearing this logo to ensure compatibility with the mini advanced shoe . Using an External Microphone When recor ding in very quiet surroundings, the built-in microphone may pick up the sound of the camcorder&ap ...

  • Canon HF M32 - page 85

    Video  85 Using other microphones Y ou can also use commercially avail- able microphones. Connect the exter- nal microphone to the MIC terminal. Use commercially available condenser microphones with their own power supply. Y ou can connect almost any stereo micr ophone with a ∅ 3.5 mm plug but audio recor ding levels may vary . NOTES • When ...

  • Canon HF M32 - page 86

    86  Video Attach the optional RA- V1 Remote Control Adapter to the mini advanced shoe. Refer to Using the Mini Advanced Shoe ( 0 83). appears. For details about using the adapter , refer to the instruction manual of the RA- V1. For details about using the zoom remote contr oller , refer to the instruction manual of the ZR-2000 or ZR-1000. NOTES ...

  • Canon HF M32 - page 87

    Video  87 Selecting the Playback Starting Point If you have a very long scene, you may want to start playing back the scene from a certain point. Y ou can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes. If you recor ded movies using face detection ( 0 66), you can display the sce ...

  • Canon HF M32 - page 88

    88  Video To change the interval between frames T o display changes in the scene’ s main subject • The timeline ruler will show fram es taken from the scene every time the main subject detected by the camcorder changed. NOTES • For a single scene, up to 100 change s in main subject will appear in the [Timeline] screen when [ o Faces] is se ...

  • Canon HF M32 - page 89

    Video  89 Playing Back Scenes Set to Background Music Y ou can play back video snapshot scenes, scenes in the playlist and photo slideshows set to background music (instead of the original sound). Y ou can use one of the supplied music tracks or connect an external audio player to use your favorite songs as background music. Using One of the Sup ...

  • Canon HF M32 - page 90

    90  Video 3 Back in the index screen, touch a scene to start the playback set to the selected music track. In mode, touch a photo to go to single photo view and continue with the slideshow procedur e ( 0 113). To delete a music track In the music track selection screen, touch [ Z ] or [ O ] to select the track you want to delete. Using an Extern ...

  • Canon HF M32 - page 91

    Video  91 2 Activate the external audio input. 3 Connect the external player to the camcorder's MIC terminal. 4 Adjust the audio input as necessary . • Start the music playback on the exte rnal player and adjust its volume according to the onscr een indication s. When the audio input is in the correct range, stop the music playback and to ...

  • Canon HF M32 - page 92

    92  Video NOTES • Y ou can also add to the playlist just the video snapshot scenes you want to watch and arrange their playback order . • Initializing a memory card will permanently erase any music files you may have transferred to the car d. ( The music files that come pre-installed in the built-in memory will be r estored after it is initi ...

  • Canon HF M32 - page 93

    Video  93 Onscreen Displays and Data Code Y ou can tur n most onscreen displays on or of f. Repeatedly press h to turn the onscreen displays on/of f in the following sequence: , mode: •A l l d i s p l a y s o n • Most displays off 1 1 Pressing h will turn off most of the icons an d displays that appear automati- cally but will not remove ons ...

  • Canon HF M32 - page 94

    94  Video Playlist and Scene Operations Editing the Playlist: Adding, Deleting , Moving and Playing Back Create a playlist to play back only the scenes you pr efer and in the order of your choice. Y ou can play ba ck the scenes in the playlist using your favorite song as background music ( 0 89). Adding Scenes to the Playlist 1 Open the [Origina ...

  • Canon HF M32 - page 95

    Video  95 • Y ou can copy scenes from the built-in memory to the memory card ( 0 126) to include in the memory car d’ s playlist also scenes that were originally r ecorded in the built-in memory . Deleting Scenes from the Playlist Deleting scenes from the playlist will not af fect your original recordings. 1 Open the [Playlist] index screen. ...

  • Canon HF M32 - page 96

    96  Video Capturing Photos and Video Snapshot Scenes from a Movie Y ou can capture video snapshot scenes, single photos or a series of continuous photos from a pr eviously recorded scene. For example, you may want to print photos from video r ecorded at a party or create a small video clip using video snapshot scenes from the highlights of an ev ...

  • Canon HF M32 - page 97

    Video  97 NOTES • A video snapshot scene can be captured only during playback; it can- not be captured during playback pause mode. • The captur ed video snapshot scene is saved to the same memory that contains the source scene. • Video snapshot scenes cannot be captured from any of the following types of scenes. - Scenes shorter than 1 sec ...

  • Canon HF M32 - page 98

    98  Video To capture the photos 1 Play back the scene from which you want to captur e the photo. 2 Pause the playback at the point you want to capture. 3 Press j fully . T o capture a photo sequence, hold j pressed down. The scene will be played back by frames and each frame captured as a separate photo. 4T o u c h [ B ] to return to the index s ...

  • Canon HF M32 - page 99

    Video  99 2 Select the scene you want to divide and touch it to start playing it back. 3 Pause the playback at the point where you want to divide the scene. 4 Open the scene division screen. 5 Bring the scene to a precise point, if necessary . • During playback pause: T ouch [ A ] to play back the scene. T ouch [ F ] or [ E ] to jump a frame b ...

  • Canon HF M32 - page 100

    100  Photos Photos Refer to this chapter for details on taking photos (advanced shooting functions), viewing photos and printing them. For details about basic photo shooting, refer to Dual Shot Mode ( 0 42). Basic Playback Viewing Photos 1P r e s s S . 2 Open the [Photos] index screen, if it is not displayed. 3 Look for the photo you want to pla ...

  • Canon HF M32 - page 101

    Photos  101 4 T ouch the photo you wish to view . • The photo is displayed in single photo view . • Drag your finger left/right to br owse thr ough the photos one by one. To return to the index screen from single photo view 1 T ouch the screen to display the playback contr ols. 2T o u c h [ Q ]. Photo Jump Function When you have recor ded a ...

  • Canon HF M32 - page 102

    102  Photos IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcor der . - Do not change the camcorder’ s operating mode. • The following image file ...

  • Canon HF M32 - page 103

    Photos  103 3 T ouch on the individual photos you want to delete. • A checkmark O will appear on photos selected. T ouch a selected photo again to remove the checkmark. • T o select all the photos at once: T o uch [Select All] instead of touching individual photos. (Remove in adva nce any checkmarks from photos you may have selected individu ...

  • Canon HF M32 - page 104

    104  Photos Additional Functions T aking Photos in y Manual Mode 1 Set the mode switch to y . 2 T urn on the camcorder . • By default, photos are r ecorded in the built-in memory . Y ou can select the memory that will be used to recor d photos ( 0 38). • Please read the IMPORT ANT section before using an Eye-Fi card. 3T o u c h [ 3 ] to swit ...

  • Canon HF M32 - page 105

    Photos  105 NOTES • If the subject is not suitable for autofocus, the onscreen icon h turns yellow . Adjust the focus manually ( 0 74). • When the subject is too bright, [Ove rexp.] will flash on the screen. In such case, use the optional FS-H37U ND filter . Deleting a Photo Right After Recording It Y ou can delete a photo you have just reco ...

  • Canon HF M32 - page 106

    106  Photos Options Large capacity memory car ds, like thos e usually used for video record- ing, can contain a very large number of photos. As a r eference, the number of photos that can be recor ded on a 1 GB memory card is given in the following table. NOTES • The actual number of photos that can be recor ded will vary depending on the subj ...

  • Canon HF M32 - page 107

    Photos  107 Flash Y ou can use the flash to take photos in dark places. POINTS T O CHECK • Select a recor ding program other than [ M Fireworks], [ r Underwater] or [ s Surface]. 1 Select the flash mode. • The icon of the selected flash mode appears. U disappears after 4 seconds. Approximate number of photos av ailable on a 1 GB memory card ...

  • Canon HF M32 - page 108

    108  Photos 2P r e s s j , first halfway to activate the autofocus and then fully to recor d the photo. Depending on the setting selected and shooting conditions, the flash will fire. Options (  Default value) Using the VFL-2 Video Flash Light Y ou can use the optional VFL-2 Video Flash Light as an external flash when its POWER switch is set ...

  • Canon HF M32 - page 109

    Photos  109 • About the AF-Assist Lamp: While you press j halfway , if the sur- roundings of the subject ar e too dark, the mini video light may light up briefly in order to enable the camcor der to focus more accurately (AF- assist lamp). - Y ou can also set 8 8 [AF-Assist Lamp] to [ B Off] so the assist lamp is not activated. - The camcorder ...

  • Canon HF M32 - page 110

    110  Photos Options (  Default value) Continuous Shooting/Hi-Speed Continuous Shooting 1 Press j halfway to activate the autofocus. 2 Press j fully and hold it pr essed down. Auto Exposure Bracketing Press j , first halfway to activate the autofocus and then fully to recor d the 3 photos. NOTES • Continuous shooting speeds are appr oximate ...

  • Canon HF M32 - page 111

    Photos  111 * The number displayed on the right corn er indicates the approximate number of photos that can be recor ded with the current quality/size setting. ** T ouch [ X ] if you do not intend to use simultaneous recor ding. While recor ding, or in record pause mode, pr ess j to capture the photo. In mode, the size/quality of photos taken wh ...

  • Canon HF M32 - page 112

    112  Photos Light Metering Mode The camcorder measur es the light reflected from the subject in or der to calculate the optimal exposure setting s. Depending on the subject, you may want to change the way the light is measured and evaluated. POINTS T O CHECK • Select a recor ding program other than the Special Scene recor ding pro- grams. Opti ...

  • Canon HF M32 - page 113

    Photos  113 Slideshow set to a music track 3 T ouch the screen to display the playback controls, then touch [ A ] to play back the slideshow set to the selected music track. Slideshow not linked to the external audio 3 T ouch the screen to display the playback controls, then touch [ A ] to start the slideshow . 4 Start the music playback on the ...

  • Canon HF M32 - page 114

    114  Photos 2 Drag your finger across the photo to display the ar ea you want to see enlarged. T o cancel the magnification, move the zoom lever toward Q until the frame disappears. Rotating Photos Y ou can rotate photos 90 degrees to change their orientation. 1 In single photo view , select the photo you want to rotate. 2 T ouch the screen to d ...

  • Canon HF M32 - page 115

    Photos  115 The histogram and Exif information panel are displayed as well. Pr ess h to hide the histogram and Exif information panel. The area to the right of the histogram r epresents highlights and the left side repr esents shadows. A photo whose histogram skews to the right is relatively bright; while one whose histogram peaks to the left, i ...

  • Canon HF M32 - page 116

    116  Photos * T ouch [Remove Protection] to remove th e pr otection from the selected photos. IMPORT ANT • Initializing the memory will permanen tly erase all recordings, including protected photos. - r Functions You Can Use when T aking Photos [Edit] 8 [Protect] 8 [Pr otect]* 8 [OK] Y ou can also use the following functions... The following f ...

  • Canon HF M32 - page 117

    Photos  117 Printing Photos Printing Photos (Direct Print) The camcorder can be connected to any PictBridge-compatible printer . Y ou can mark in advance the photos you want to print and set the desired number of copies as a print or der ( 0 119). Canon printers: SELPHY printers of the CP , DS and ES series and PIXMA printers carry- ing the Pict ...

  • Canon HF M32 - page 118

    118  Photos • Refer also to the printer’ s instruction manual. • If you have no intention to use the optional DW-100 DVD Burner , you can set 8 8 [USB Connection T ype] to [ N Computer/Printer] so the device type selection screen do es not appear every time you con- nect the camcorder to a printer . • For best performance when connecting ...

  • Canon HF M32 - page 119

    Photos  119 Print errors If an error occurs while printing, an err or message (for example, [No paper]) will appear on the camcorder’ s screen. Solve the pr oblem refer- ring to the error message list ( 0 184) and to the printer's instruction manual. • Canon's PictBridge-compatible printers: If printing does not resume auto- matica ...

  • Canon HF M32 - page 120

    120  Photos • The total number of copies in the DPOF print order appears next to the H icon. • T o cancel the print order , set the number of copies to 0. 4 Drag your finger left/right to select another photo to mark with a print order or touch [ a ]. Setting Print Orders from the Index Screen 1 Open the [Photos] index screen. Check that you ...

  • Canon HF M32 - page 121

    External Connections  121 External Connections This chapter explains how to connect your camcorder to an external device such as a TV , VCR, or computer . T erm inals on the Camcorder * When connecting a cable to the camcorder , make sure to align the triangle marks on the cable's connector and on the camcorder's terminal. 1 COMPONENT ...

  • Canon HF M32 - page 122

    122  External Connections Connection Diagrams In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for r eference only) an example of terminals on a connected device. Connection A HDMI T ype: Digital Quality: High definition Output only Connect to a high-definition TV (HDTV) with an H ...

  • Canon HF M32 - page 123

    External Connections  123 Connection B Component Video T ype: Analog Quality: High Definition Output only Connect to a high-definition TV (HDTV) with component video input terminals. Change the following settings on the camcorder: - 6 8 [AV/Headphones] to [ H AV] Connection C Composite Video T ype: Analog Quality: Standard definition Output only ...

  • Canon HF M32 - page 124

    124  External Connections NOTES • Power the camcorder using the compact power adapter and only then connect it to the computer using the supplied USB cable in the follow- ing cases. - T o write back scenes recorded with this camcorder that wer e previously saved on a computer . - T o transfer music files from the supplied Camcorder Supplementa ...

  • Canon HF M32 - page 125

    External Connections  125 4 T urn on the camcorder and set it to or mode. Play back the movies or photos. NOTES • T o correctly play back movies recor ded with x.v .Color ( 0 156) on an HDTV compatible with this stan dard, additional settings may be requir ed on the connected HDTV . Refer to the TV’ s instruction manual. • We r ecommend po ...

  • Canon HF M32 - page 126

    126  External Connections Saving and Sharing Y our Recordings Copying Recordings to a Memory Card Y ou can copy your recordings only one-way: fr om the built-in memory to the memory card. Scenes and photos will be copied fr om the index screen you selected to the corr esponding index screen on the memory card. Please read the IMPOR T ANT section ...

  • Canon HF M32 - page 127

    External Connections  127 Copying a Single Photo 1 In single photo view , select the photo you want to copy . Check that you are viewing photos r ecorded in the built-in memory . ( f appears next to the photo number .) 2 T ouch the screen to display the playback contr ols. 3 Copy the photo. 4 Drag your finger left/right to select another photo t ...

  • Canon HF M32 - page 128

    128  External Connections IMPORT ANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - Do not disconnect the power source or turn off the camcor der . - Do not change the camcorder’ s operating mode. • When copyi ...

  • Canon HF M32 - page 129

    External Connections  129 Installation See ‘PIXELA Applications’ Installation Guide. Using the software See ‘ImageMixer 3 SE Software Guide’ (PDF file). Saving Photos With the supplied software Photo Application you can save photos to your computer , and easily organize and edit them. Installation Install the software befor e you conn ec ...

  • Canon HF M32 - page 130

    130  External Connections 4 Save the photos onto the computer . r Refer to Downloading Still Images to the Computer . IMPORT ANT • When the camcorder is connected to a computer: - Do not open the memory card slot cover and do not remove the memory card. - Do not access, change or delete any of the camcorder’ s folders or files directly fr om ...

  • Canon HF M32 - page 131

    External Connections  131 • If you connect the camcorder to the computer while it is set to mode, the process of cr eating scene thumbnails will start automatically . If your intention was to save photos to the computer , you can touch [Skip] to stop the process and use the computer’ s Safely Remove Hard- ware function (Windows) or Eject fun ...

  • Canon HF M32 - page 132

    132  External Connections 3 For original recor dings only: Choose whether to add to the disc all the scenes or only scenes that ha ve not been previously added to a disc. When you create the disc from the [Pla ylist] index screen (including the playlist of video snapshot scenes), the disc will contain the entire playlist. Connecting to the DW-10 ...

  • Canon HF M32 - page 133

    External Connections  133 • When the last disc is finalized, [T ask completed] will be displayed. T ake out the disc and close the disc tray . When the data requires multiple discs After a disc is finalized, it will be ejected automatically and a message will appear . Insert the next disc and close the disc tray . To create an additional copy ...

  • Canon HF M32 - page 134

    134  External Connections Playing Back AVCHD Discs Using the DW-100 DVD Burner Y ou can use the optional DW-100 DV D Burner and the camcorder also to play back high-definition (A VCHD) discs on a TV . This is very conve- nient, for example to play back your discs even in a location where an A VCHD-compatible DVD player is not available. 1 Connec ...

  • Canon HF M32 - page 135

    External Connections  135 6 Select the scene you want to play back and touch it to start playing it back. IMPORT ANT • While the camcorder is connected to the DVD Burner , do not open the memory card slot cover and do not r emove the memory card. NOTES • Only A VCHD discs created with the DW-100 DVD Burner can be played back using the DVD Bu ...

  • Canon HF M32 - page 136

    136  External Connections Carefully r ead the information in SDXC Memor y Cards ( 0 37) before performing the pr ocedure using recor dings made on an SDXC memory card. Converting Scenes into Standard Definition 1 Power the camcorder using the compact power adapter . 2 Make sure ther e is a memory card in the camcorder with suf ficient available ...

  • Canon HF M32 - page 137

    External Connections  137 T o embed the recording date and time The recor ding date and time will al ways be displayed on the converted scene. T o select the bit rate Using a higher bit rate will result in better video quality for the con- verted scenes. NOTES • When converting scenes in the [P laylist] or [Video Snapshot] → [Original]/ [Pla ...

  • Canon HF M32 - page 138

    138  External Connections 3 Connect the camcorder to the computer using the supplied USB cable. • Connection D . Refer to Connection Diagrams ( 0 124). • If the device type selection screen appears, touch [Computer/ Printer]. • On the computer , ImageMixer 3 SE will start up automatically and the startup screen (ImageMixer 3 Launcher) will ...

  • Canon HF M32 - page 139

    External Connections  139 4 Connect the camcorder to the DW -100 DVD Burner and create the disc. The procedur e is the same as that for bur ning A VCHD discs ( 0 132). To play back standard-definition DVDs Standard-definition DVDs ar e created using DVD-Video specifications. Play back these DVDs using standard DVD players. NOTES • When the cam ...

  • Canon HF M32 - page 140

    140  External Connections To play back Photo DVDs Photo DVDs are cr eated using DVD-Video specifications. Play back these DVDs using standard DVD players. If you computer has a DVD drive, you can play back the slideshow as a DVD and you can also access individual photos as JPG files. NOTES • Photo DVDs cannot be played back using the DW-100 DV ...

  • Canon HF M32 - page 141

    External Connections  141 Recording 1 External device: Load a blank cassette or disc and set the device to recor d pause mode. 2 T urn on the camcorder and set it to mode. Ve r i f y t h a t 6 8 [AV/Headphones] is set to [ H AV ] . 3 Camcorder: Locate the scene you wish to copy and pause the playback shortly just before the desir ed scene. 4 Cam ...

  • Canon HF M32 - page 142

    142  External Connections Using the software See ‘ImageMixer 3 SE Software Guide’ (PDF file). Converting Scenes into Standard Definition 1 Power the camcorder using the compact power adapter . 2 Make sure ther e is a memory card in the camcorder with suf ficient available space. 3 Open the [Original], [Playlist] or [Video Snapshot] → [Orig ...

  • Canon HF M32 - page 143

    External Connections  143 7 When the conversion is completed, a confirmation screen will appear . Connect the camcorder to the computer at this point ( 0 144) to continue uploading the converted videos to the Web or touch [End Without Connecting] to connect to the computer later . T o embed the recording date and time The recor ding date and tim ...

  • Canon HF M32 - page 144

    144  External Connections • When converting scenes in the [Playlist]: - All the scenes are merged into one converted scene. - If the converted scene is too large, it will be spli t into smaller 10- minute long scenes. - When converting only part of a scene, the maximum length of the converted scene will be 10 minutes from the starting (playbac ...

  • Canon HF M32 - page 145

    External Connections  145 IMPORT ANT • While the camcorder is connected to the computer , do not open the memory card slot cover and do not r emove the memory card. • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not open the memory card slot cover . - ...

  • Canon HF M32 - page 146

    146  External Connections IMPORT ANT Using an Eye-Fi Card • This product is not guaranteed to support Eye-Fi card functions (includ- ing wireless transfer). In case of an issue with an Eye-Fi car d, please check with the card manufactur er . Also note that an approval is requir ed to use Eye-Fi cards in many countri es or r egions. W ithout ap ...

  • Canon HF M32 - page 147

    Additional Information  147 Additional Information This chapter contains troubleshooting advice, scr een mes- sages, handling and maintenance tips, and other information. Appendix: Menu Options Lists Menu items not available appear grayed out. For details about how to select an item, refer to Using the Menus ( 0 32). For details about each funct ...

  • Canon HF M32 - page 148

    148  Additional Information [ S Flash] [ U Automatic] , [ V Red-Eye Auto], [ S Flash On], [ W Flash Off] – z 107 [ X Foc us ] [ 2 ] (manual focus): T oggle on ( x ) or off ( w ) , T ouch AF frame zz 74 [ e Exposure] [ y ] (manual exposure): T oggle on ( x ) or off ( w ) , T ouch AE frame zz 73 [ZOOM] Zoom controls, g control zz 46 [ P AGC Limi ...

  • Canon HF M32 - page 149

    Additional Information  149 Setup Menus [Edit] Panel - Mode 1 : Original scenes s : Playlist scenes (including the play list only of video snapshot scenes) Z : Original video snapshot scenes u : SD scenes on the memory card ( only) Control Button T arget Scenes/Function 1 s Z u 0 [Copy ( P U g )] [Selected Scenes] z – z –1 2 6 [All Scenes] z ...

  • Canon HF M32 - page 150

    150  Additional Information [Edit] Panel - Mode Control Button Index Screen Single Photo View 0 [Copy ( P U g )] [Selected Photos], [All Photos] z 127 [Delete] z 102 [Protect] z 115 [Print Orders] z 119 [Rotate] – z 114 ...

  • Canon HF M32 - page 151

    Additional Information  151 Setup Menus 7 / 8 Camera Setup * Option available only when the optional SM-V1 Surround Microphone is attached to the camcorder after having updated the camcorder’ s firmware using the mem- ory card supplied with the SM-V1. Menu item Setting options 4 3 0 [Digital Zoom] [ B Off] , [ G 60x], [ H 300x] z –– [Zoom ...

  • Canon HF M32 - page 152

    152  Additional Information [Digital Zoom]: Determines the operation of the digital zoom. The color of the indicator indi- cates the zoom. • When activated, the cam- corder will switch automatically to digital zoom when you zoom in beyond the optical zoom range. • With the digital zoom the image is digitally processed, so the image resolutio ...

  • Canon HF M32 - page 153

    Additional Information  153 • Using focus assistance will not affect the recor dings. It will be cancelled automatically after 4 seconds or when you start recor ding. [Auto Slow Shutter]: The camcorder automatically uses slow shutter speeds to obtain brighter recor dings in places with insufficient lighting. • Minimum shutter speed used: 1/3 ...

  • Canon HF M32 - page 154

    154  Additional Information [Onscr een Markers]: Y ou can display a grid or a horizontal line at the cen- ter of the screen. Use the markers as a reference to make sure your sub- ject is framed correctly (ver tically and/or horizontally). • Using the onscreen markers w ill not affect the recor dings. [POWER ED IS B utton] : Determines the oper ...

  • Canon HF M32 - page 155

    Additional Information  155 [Frame Rate]: Selects the frame rate to be used when recor ding. [ o PF30]: 30 frames per second, progressive. Use this frame rate to easily edit your recordings, for ex ample, to post them on the Web. [ E PF24]: 24 frames per second, pr ogressive. Using this frame rate will give your recordings a cinematic look. When ...

  • Canon HF M32 - page 156

    156  Additional Information [Memory Info]: Displays a screen where you can verify how much of the built-in memory ( only) or the memory card is currently in use ( l to ta l re c ord in g t im e an d k total number of photos) and how much space remains available for r ecording. • Estimated figures about available movie r ecording time and avail ...

  • Canon HF M32 - page 157

    Additional Information  157 • The photo number indicates the name and location of the file on the memory card. For example, the file name of a photo number ed 101- 0107 is “IMG_ 0107 .JPG”, stored under the folder “DCIM 101 CANON”. [USB Connection T ype]: Select the connection protocol to use when con- necting the camcorder to an exte ...

  • Canon HF M32 - page 158

    158  Additional Information • When the TV type is set to [ F Normal TV], during the playback of video originally recor ded with an asp ect ratio of 16:9, the picture will not be displayed fullscreen. 6 System Setup Menu item Setting options 4 3 1 2 0 [Font Size] [ A Large], [ B Small] zzzz – [Output Onscreen Displays] [ A On] , [ B Off] zzzz ...

  • Canon HF M32 - page 159

    Additional Information  159 1 Option not availabl e from the [Playlist] index screen. 2 Option not avai lable when the camcor der is connected to an HDTV using an HDMI cable. 3 Option available o nly after havi ng inserted an Eye -Fi card in the memo ry card slot. [Initializ e f / g ] [ f Built-in Mem.], [ g Mem. Card] zz z 1 z 40 [Complete Ini ...

  • Canon HF M32 - page 160

    160  Additional Information [Font Size]: Changes the size of the font fo r the menu and other screens. • When the font size is set to [ A Large], some information may be dis- played in shortened form (icons only , etc.). Some screens will be dis- played using the small font size regar dless of the setting. [Output Onscreen Displays] • When s ...

  • Canon HF M32 - page 161

    Additional Information  161 • Y ou can set Quick Start to [ B Off], for example, if the camcorder is set on a fixed position and you want to keep recor ding video with the LCD panel closed in order to conserve the battery's power . [Calendar Start Day]: Select the day on which the week in the calendar screen ( 0 55). [Battery Info]: Displ ...

  • Canon HF M32 - page 162

    162  Additional Information [Demo Mode]: The demonstration mode displays the camcorder's main features. It starts automatically when the camcor der is powered with the compact power adapter if you leave it turned on without a memory card for more than 5 minutes. • T o cancel the demo mode once it has started, press any button or turn off ...

  • Canon HF M32 - page 163

    Additional Information  163 Appendix: Onscreen Icons and Displays Recording Movies (in Dual Shot mode) 1 Smart AUTO mode ( 0 43) 2 Onscreen zoom controls ( 0 46) 3 Operating mode ( 0 31) 4 In recor d pause mode: T otal number of scenes 5 Memory operation ( 0 167) 6 Remaining battery time ( 0 167) 7 Zoom ( 0 46) 8 Recording mode ( 0 59) 9 Control ...

  • Canon HF M32 - page 164

    164  Additional Information Recording Movies (in y Manual mode) A s Control button: Open the FUNC. panel ( 0 32) A d Recording program ( 0 60, 63, 70) A f R Instant AF ( 0 152), MF Manual focus ( 0 74) A g Manual exposure ( 0 73) A h AGC (automatic gain) limit ( 0 74) A j White balance ( 0 76) A k Image effect ( 0 77) A l Control button: Last fu ...

  • Canon HF M32 - page 165

    Additional Information  165 Recording Photos (in y Manual mode) D k Drive mode ( 0 109) D l Light metering mode ( 0 112) F q Control button: Last function used ([MENU] in this case) F a Self timer ( 0 79) F s Flash ( 0 107) F d Eye-Fi wireless communication ( 0 145) F f Number of available photos g On the memory card f In the built-in memory F g ...

  • Canon HF M32 - page 166

    166  Additional Information Viewing Photos Exif information panel G g Control button: Open the setup menus ( 0 151) G h Protected photo mark ( 0 115) G j Current photo / T otal number of photos G k Photo number ( 0 156) G l Histogram ( 0 114) H q Control button: Photo jump ( 0 101) H a Date and time of recording H s Control button: Slideshow ( 0 ...

  • Canon HF M32 - page 167

    Additional Information  167 5 Memory operation N Record, M Record pause, A Playback, C Playback pause, I Fast playback, J Fast reverse playback, G Slow playback, H Slow reverse playback, E Frame advance, F Frame reverse. 6 Remaining battery time • The icon shows a rough estima te of the remaining charge as a percentage of the full charge of th ...

  • Canon HF M32 - page 168

    168  Additional Information Tro u bl e ? T roubleshooting If you have a problem with your camco rder , re fe r t o t hi s s ec ti on . S om e- times what you think is a malfunction of the camcorder may have the simplest of solutions - please read the “CHECK THIS FIRST” box before going on to the mor e detailed problems and solutions. Consult ...

  • Canon HF M32 - page 169

    Additional Information  169 - The camcorder cannot communicate with the ba tter y pack attached. Such batter y packs can- not be charged using this camcorder . A noise can be heard from the compact power adapter . - A faint sound can be heard while the compact po wer ada pter is connected to a power outlet. This is not a malfunction. The battery ...

  • Canon HF M32 - page 170

    170  Additional Information After using the camcorder for a long time , it becomes hot. - The camcorder may become hot af ter using it continuously for lo ng periods of time; this is not a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only for a short while, it may indica te a problem with the camcorde r . ...

  • Canon HF M32 - page 171

    Additional Information  171 When playing scenes/a slideshow linked to extern al audio, the video playback is not corr ectly linked to the external player . - The volume of external player may be too low. T r y increasing the volume of the external player . Cannot divide scenes - Y ou cannot divide scenes recorded or edited using another device. ...

  • Canon HF M32 - page 172

    172  Additional Information The red ON/OFF (CHG) indicator flashes very slowly ( one flash at 2- second intervals). - The temperature of the ba ttery pack is outsid e the charging range. If the batter y pack’ s tem- perature is below 0 °C (32 °F), warm it before char ging it; if it is above 40 °C (104 °F), let the battery pack cool do wn b ...

  • Canon HF M32 - page 173

    Additional Information  173 Sound is distorted or is recorded at lower levels. - When recording near loud sounds (such as fire works, shows or concer ts), sound may become distorted or it may not be recorded at the ac tual levels. Activate th e microphone attenua tor ( 0 153) or adjust the audio recording level manually ( 0 80). The picture is d ...

  • Canon HF M32 - page 174

    174  Additional Information Connections with External Devices Video noise appears on the TV screen. - When using the camcorder in a room where a TV is located, keep a distance between the compact power adapter and the powe r or antenna cables of the TV . Playback looks fine on the camcorder but there is no image on the TV screen. - The video inp ...

  • Canon HF M32 - page 175

    Additional Information  175 After connecting the camcorder to a printer , th e message [Busy] continues to appear on the screen - Disconnect the USB cable and restor e the connection after a short while. Photos are not correctly printed - Y ou may not be able to prin t correctly , using a PictBridge-c ompatible printer , photos whose file names ...

  • Canon HF M32 - page 176

    176  Additional Information Buffer overflow . Recording was stopped. - The data transfer ra te was too high for th e memory card in use and the recording was stopped. Replace the memory card with one rated Speed Class 2, 4, 6 or 10. - After repeatedl y recording, deleting and editi ng scenes (fragmented memory), it will take longer to write data ...

  • Canon HF M32 - page 177

    Additional Information  177 Cannot enter standby mode now - The camcorder cannot enter standby mode if the remaining batter y charge is too low. Charge or replace the battery pack ( 0 23). Cannot play back - There is a problem with the me mor y . If this message appears often without a pparent reason, contact a Canon Service Center . Cannot play ...

  • Canon HF M32 - page 178

    178  Additional Information Cannot record movies in the built-in memory Initialize only using the camcorder - The camcorder's built-in memory was initialized using a comput er . Initialize the built-in mem- ory with this camcorder ( 0 40). Cannot record movies on this memory card - Movies cannot be recorded on a 64 MB or smaller memory card ...

  • Canon HF M32 - page 179

    Additional Information  179 Do not disconnect the USB cable or the power so urce until you safely e nd the connection from the computer . Connect the compact power adapter - When the camcorder is in mode and is co nnected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source wh ...

  • Canon HF M32 - page 180

    180  Additional Information Memory card is full - The memor y card is full. Delete some recordings ( 0 56, 102) to free some space or replace the memory card. Memory card is write-protected - The LOCK switch on the memor y card is set to prevent accidental erasure. Change the posi- tion of the LOCK switch. Need to recover files from the memory c ...

  • Canon HF M32 - page 181

    Additional Information  181 Scene recorded using another device . Cannot divide the scene. - Scenes recorded using anot her device cannot be divi ded with this camcorder . Select the desired scene number - A number of scenes have the same recording da te but different file control informa tion. This can occur for example when you ed it photos an ...

  • Canon HF M32 - page 182

    182  Additional Information This scene was recorded using another device and cannot be added to the playlist. - Scenes that were not recorded with this camcorder cannot be added to the playlist. This scene was recorded using another device and cannot be copied. - Scenes that were not recorded with this ca mcorder cannot be copied to the memory c ...

  • Canon HF M32 - page 183

    Additional Information  183 Close the memory card slot cover - The memory card slot cover is open. Close the cover after correctly inserting the memory card ( 0 38). Connect the compact power adapter - The camcorder is being powere d by the ba ttery pack. Connect the compact power ada pter to the camcorder . Disc access failure . Check the disc. ...

  • Canon HF M32 - page 184

    184  Additional Information Direct Print Related Messages Data transfer error - Cancel printing, disconnect the USB cable and turn off the printer . After a while, turn the printer back on and re connect the USB cable. - Y ou attempted to print from a memory card th a t contains a large nu mber of photos. Reduce the number of photos. File error ...

  • Canon HF M32 - page 185

    Additional Information  185 Printer cover open - Close the printer cover securely. Printer error - A malfunction has occurred that may require re pairs. (Canon PIXMA printers: the printer's green power lamp and orange e rror lamp flash alternately.) - Disconnect the USB cable and turn off the printer . Unplug the printer's power cord f ...

  • Canon HF M32 - page 186

    186  Additional Information Do’s and Don’ts Handling Precautions Camcorder Be sure to observe the following pr ecautions to ensure maximum per- formance. • Save your recor dings periodically . Make sure to transfer your record- ings to an external device such as a computer or digital video recorder ( 0 126) and save them on a regular ba si ...

  • Canon HF M32 - page 187

    Additional Information  187 • When mounting the camcorder on a tripod, make sure that the tripod's fas- tening screw is shorter than 5.5 mm (0.2 in.). Using other tripods may dam- age the camcorder . • When recor ding movies, try to get a calm, stable picture. Excessive cam- corder movement while shooting and extensive use of fast zooms ...

  • Canon HF M32 - page 188

    188  Additional Information Remaining batter y time If the remaining battery time displaye d is not corr ect, charge the battery pack fully . Still, the correct time ma y not be displayed if a fully charged battery pack is used conti nuously in high temperatures or it is left unused for long periods of time. Also, the correct r emaining time may ...

  • Canon HF M32 - page 189

    Additional Information  189 • Secure Digital (SD) memory car ds have a physical switch to prevent writ- ing on the card so as to avoid the accidental erasure of the car d's con- tent. T o write-protect the memory card set the switch to the LOCK position. Built-in Rechargeable Lithium Battery The camcorder has a built-in r echargeable lith ...

  • Canon HF M32 - page 190

    190  Additional Information • Wipe the battery with a clean dry cloth to ensure proper contact. • For California, USA only: The lithium battery included contains Perchlorate Material – special handling may apply . See www .dtsc.ca.gov/hazardouswaste/per chlorate for details. Disposal When you delete movies or initialize the memory , only t ...

  • Canon HF M32 - page 191

    Additional Information  191 Maintenance/Others Cleaning Camcorder Body • Use a soft, dry cloth to clean the camcorder body . Never use chemically treated cloths or volatile solvents such as paint thinner . Lens and Instant AF Sensor • If the lens surface or Instant AF sens or is dirty , autofocus may not work properly . • Remove any dust o ...

  • Canon HF M32 - page 192

    192  Additional Information • Remove the memory card and battery pack. Then, place the camcor der in an airtight plastic bag and let it adjust gradually to temperature changes before r emoving it from the bag. When condensation is detected The camcorder automatically shuts of f. The precise time r equired for water droplets to evaporate will v ...

  • Canon HF M32 - page 193

    Additional Information  193 General Infor mation Accessories * Supplied with the camcorder; not av ailable as an optional accessory . (Av ailability differs from area to area) Optional accessories not listed below are described in mor e detail in the following pages. 1 SS-600/SS-650 Shoulder Strap A l IFC-300PCU USB Cable 2 WS-20 Wrist Strap S q ...

  • Canon HF M32 - page 194

    194  Additional Information NOTES • Accessories that are compatible with the Advanced Accessory Shoe cannot be attached to this camcorder . Look for the Mini ADV ANCED SHOE logo to ensure compatibility with the mini advanced shoe. Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accesso- ries. Y ou can also ...

  • Canon HF M32 - page 195

    Additional Information  195 5 CG-800 Battery Charger Use the battery charger to charge the battery packs. It plugs directly into a power outlet without a cable. Charging Times The charging times given in the following table are appr oximate and vary according to charging conditions and initial charge of the battery pack. Recording and Playback T ...

  • Canon HF M32 - page 196

    196  Additional Information Using a memory card * Approximate times for recording with r epeated operations such as start/stop, zooming, and power on/off. 8 TL-H37 Tele-converter This T ele-converter lens increases the focal length of the camcorder lens by a factor of 1.5. • The image stabilizer is not as effective when the T ele-converter is ...

  • Canon HF M32 - page 197

    Additional Information  197 A q FS-H37U Filter Set Neutral density and MC protector filters help you to control dif ficult lighting condi- tions. A a SC-2000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. A s SM-V1 Surround Microphone Use 5.1ch surround sound to add a sense of presence to y ...

  • Canon HF M32 - page 198

    198  Additional Information A g VFL-2 Video Flash Light This video flash light allows you to recor d photos and movies even at night or in dark places. It attaches to the cam- corder’ s mini advanced shoe for cable- free operation. A h RA-V1 Remote Control Adapter Attaching this adapter to the mini advanced shoe allows you to use the optional ...

  • Canon HF M32 - page 199

    Additional Information  199 Product Codes Provided Accessories CA-570 Compact Power Adapter 8468A002AA BP-808 Battery Pack 2740B002AA WL-D89 Wireless Contr oller D83-0790-000 STV-250N Stereo V ideo Cable 3067A002AA (D82-0590-002) IFC-300PCU USB Cable 6906A001AA Optional Accessories BP-809 Battery Pack 2588B003AA (silver), 2588B004AA (black) BP-8 ...

  • Canon HF M32 - page 200

    200  Additional Information Specifications VIXIA HF M32 / VIXIA HF M31 / VIXIA HF M30 / VIXIA HF M300  — V alues given are appr oximate figures. System • Recording System Movies: A VCHD Video compression: MPEG-4 AVC/H.264; Audio compression: Dolby Digital 2ch; Dolby Digital 5.1ch* * Only when using the option al SM-V1 Surround Microphone. ...

  • Canon HF M32 - page 201

    Additional Information  201 * When two values are given, the first indicates the value a t full telephoto ( T ) and the second the value at full wide-angle ( W ). • LCD T ouch Screen: 2.7 in., wide, TFT color , approx. 211,000 dots  , touch opera tion • Microphone: Stereo electret condenser microphone • Lens f=4.1-61.5 mm, F/1.8-3.2, 15 ...

  • Canon HF M32 - page 202

    202  Additional Information • MIC T er minal ∅ 3.5 mm stereo minijack –57 dBV (with 600 Ω microphone) / 5 k Ω or more Power/Others • Power supply (rated) 7.4 V DC (battery pack), 8.4 V DC (compact power adapter) • Power consumption  : 3.5 W (SP mode, AF on, LCD normal brightness) • Operating temperature: 0 – 40 °C (32 – 1 ...

  • Canon HF M32 - page 203

    Additional Information  203 Weight and dimensions ar e approxima te. Errors and omissions excepted. The information in this manual is verified as of June 2010. Subject to change without notice. About the music files The specifications of the music file s compatible with the camcorder are as follows. Audio encoding: Linear PCM Audio sampling: 48 ...

  • Canon HF M32 - page 204

    204  Additional Information Index 24p Cinema Mode . . . . . . . . . . . . . 63 3D Flip View . . . . . . . . . . . . . . . . . 54 A Abroad, using the camcorder . . . . 192 AF-assist lamp . . . . . . . . . . . . . . 109 AGC (automatic gain) limit . . . . . . . 74 Aperture (f number) . . . . . . . . . . . . 70 Aspect ratio of a connected TV (TV typ ...

  • Canon HF M32 - page 205

    Additional Information  205 Headphones . . . . . . . . . . . . . . . . . 82 Histogram . . . . . . . . . . . . . . . . . . 1 14 I Image effects . . . . . . . . . . . . . . . . 77 Image stabilizer . . . . . . . . . . . . . . . 64 Index screens . . . . . . . . . . . . . . . . 49 Index screen selection . . . . . . 52 Showing some/ all of the scenes ...

  • Canon HF M32 - page 206

    206  Additional Information Serial number . . . . . . . . . . . . . . . . 22 Setup menus . . . . . . . . . . . . . 33, 151 Shutter speed . . . . . . . . . . . . . . . . 70 Simultaneous record ing . . . . . . . . 1 10 Slideshow . . . . . . . . . . . . . . . . . . 1 12 Smart AUTO mode . . . . . . . . . . . . 43 Snow (recording pr ogram) . . . . . ...

  • Canon HF M32 - page 207

    207 CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED WARRANTY FOR THE UNITED ST A TES The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA ”) with respect to Canon Consumer Digital Video Equipment (t he “Equipment”) purchased in the United States. This limite d warranty is only effective upon presentation of your B ...

  • Canon HF M32 - page 208

    208 LOSS OR CORRUPTION OF DAT A, INCLUDING WITHOUT LIM ITA TION, LOSS OR CORRUPTION OF DAT A STORED ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT , REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVIS ...

  • Canon HF M32 - page 209

    209 CANON CONSUMER DIGIT AL VIDEO EQUIPMENT LIMITED WAR R AN T Y The limited warranty set forth below is gi ven by Canon Canada Inc. (“Canon Canada”) with re spect to Canon Consumer Digital Video Equipment (the “Equ ipment”) purchased in Canada. This limited warra nty is only effective upon presentation of a bill of sale or other proof of p ...

  • Canon HF M32 - page 210

    USA CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway , Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFFICE 210 War d Avenue, Suite 200, Honolulu, Hl 96814 USA ❖ If you have any questi ...

Manufacturer Canon Category Camcorder

Documents that we receive from a manufacturer of a Canon HF M32 can be divided into several groups. They are, among others:
- Canon technical drawings
- HF M32 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon HF M32
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon HF M32.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon HF M32, service manual, brief instructions and user manuals Canon HF M32. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon HF M32.

Similar manuals

A complete manual for the device Canon HF M32, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon HF M32 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon HF M32.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon HF M32 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon HF M32, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon HF M32, that we can find in the current document
3. Tips how to use the basic functions of the device Canon HF M32 - which should help us in our first steps of using Canon HF M32
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon HF M32
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon HF M32 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon HF M32?

Use the form below

If you did not solve your problem by using a manual Canon HF M32, ask a question using the form below. If a user had a similar problem with Canon HF M32 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)