Manual Porter-Cable FCP350

13 pages 8.45 mb
Download

Go to site of 13

Summary
  • Porter-Cable FCP350 - page 1

    HIGH PRESSURE CLIPPED HEAD FRAMING NAILER Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________ ...

  • Porter-Cable FCP350 - page 2

    2 Matthew G. Popik Vice President of Engineering PORTER ✦ ✦ CABLE Porter-Cable Corporation 4825 Highway 45 North Jackson, TN 38305 Date of Manufacture: ___________________________ Fecha de fabricación:, Date de fabrication: Serial No: ______________________________________ Número de serie:, Nombre d'ordre GB ENGLISH EC-DECLARA TION OF CO ...

  • Porter-Cable FCP350 - page 3

    3 GENERAL SAFETY RULES DANGER: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury, including the following: READ AND FOLLOW ALL INSTRUCTIONS. There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used f ...

  • Porter-Cable FCP350 - page 4

    4 7 . Wear ear protection to safe-guard against possible hearing loss. Fig. 5. 8 . Use clean, dry, regulated, com- pressed air at 80 to 150 PSI, (5.5 to 10.3 BAR). Fig. 6. 9. Do not connect tool to pressure which potentially exceeds 200 PSI (13.7 BAR). 10. Only use air hose that is rated for a maximum working pressure of at least 300 PSI (20.7 BAR) ...

  • Porter-Cable FCP350 - page 5

    5 22. Do not overreach. Keep proper footing and balance at all times when using or handling the tool. 23. Fire fasteners into work surface only: never into materials too hard to penetrate. Fig. 15. 2 4. Grip tool firmly to maintain control while allowing tool to recoil away from work surface as fastener is driven. In “Contact Actuation Mode” if ...

  • Porter-Cable FCP350 - page 6

    6 EMPLOYER’S RESPONSIBILITIES DANGER: Employer must enforce compliance with the safety warnings and all other instructions contained in this manual. Keep this manual available for use by all people assigned to use this tool. For personal safety and proper operation of this tool, read and understand tool labels and manual. Failure to follow warnin ...

  • Porter-Cable FCP350 - page 7

    7 Fig. 19 PREP ARING THE TOOL 1. After reading and understanding this entire manual, connect tool to air supply (Fig. 18). DANGER: Never point tool at yourself or others in work area. Always connect tool to air supply before loading fasteners (Fig. 18). Do not load fasteners with trigger or safety depressed. Only use approved Porter-Cable fasteners ...

  • Porter-Cable FCP350 - page 8

    8 5. Pull the follower (B) Fig. 22, all the way to the rear of the magazine and release. The follower will apply pressure to the strip of nails to feed it into the driving mechanism. 6. Adjust directional exhaust deflector (A) Fig. 23, so that the exhaust air blast will be directed away from the operator. The exhaust deflector provides seven detent ...

  • Porter-Cable FCP350 - page 9

    9 DANGER: Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger on trigger. In “Contact Actuation Mode” tool will fire a fastener if safety is bumped while trigger is depressed. Never point tool at yourself or others in work area. Never attempt to drive a fastener into material that i ...

  • Porter-Cable FCP350 - page 10

    10 CLEARING A JAMMED F ASTENER 1. WARNING: Disconnect tool from air supply. 2. Remove any remaining fasteners from the nailer. A. Place finger in recess (A) Fig. 28, and depress lever to release follower mechanism. B. With follower release button (A) Fig. 28 depressed, slide follower all the way to the front of the magazine. C. Depress stop (B) Fig ...

  • Porter-Cable FCP350 - page 11

    11 MAINTENANCE CLEAN AND INSPECT DAIL Y WARNING: Disconnect tool from air supply before cleaning and inspection. Correct all problems before placing the tool back in use. Wipe tool clean and inspect for wear or damage. Use non-flammable cleaning solutions to wipe exterior of tool only if necessary. DO NOT SOAK tool with cleaning solutions. Such sol ...

  • Porter-Cable FCP350 - page 12

    12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material ...

  • Porter-Cable FCP350 - page 13

    The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’s Saw ® , Contractor’s Saw ® , Contractor’s Saw II™, Delta ® , DELTACRAFT ® , D ...

Manufacturer Porter-Cable Category Nail Gun

Documents that we receive from a manufacturer of a Porter-Cable FCP350 can be divided into several groups. They are, among others:
- Porter-Cable technical drawings
- FCP350 manuals
- Porter-Cable product data sheets
- information booklets
- or energy labels Porter-Cable FCP350
All of them are important, but the most important information from the point of view of use of the device are in the user manual Porter-Cable FCP350.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Porter-Cable FCP350, service manual, brief instructions and user manuals Porter-Cable FCP350. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Porter-Cable FCP350.

Similar manuals

A complete manual for the device Porter-Cable FCP350, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Porter-Cable FCP350 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Porter-Cable FCP350.

A complete Porter-Cable manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Porter-Cable FCP350 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Porter-Cable FCP350, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Porter-Cable FCP350, that we can find in the current document
3. Tips how to use the basic functions of the device Porter-Cable FCP350 - which should help us in our first steps of using Porter-Cable FCP350
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Porter-Cable FCP350
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Porter-Cable FCP350 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Porter-Cable FCP350?

Use the form below

If you did not solve your problem by using a manual Porter-Cable FCP350, ask a question using the form below. If a user had a similar problem with Porter-Cable FCP350 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)