Manual Homelite UT10562

124 pages 25.42 mb
Download

Go to site of 124

Summary
  • Homelite UT10562 - page 1

    SA VE THIS MANUAL FOR FUTURE REFERENCE Y our chain saw has been engineered and manufactured to Homelite’ s high standard for dependability , ease of operation, and operator safety . When properly cared for , it will give you years of rugged, tr ouble-free performance. W ARNING: T o r educe the risk of injury , the user must read and understand th ...

  • Homelite UT10562 - page 2

    P age / P ágina 2  Introduction ....................................................................................................................................... 2 Introduction / Intr oducción   General Safety Rules ..................................................................................................................... ...

  • Homelite UT10562 - page 3

    P age 3 — English W ARNING: Read and understand all instructions . Failure to follow all instructi ons listed below , may resu lt in electric shock, fire and/or serious personal injury . READ ALL INSTRUCTIONS  Know your tool. Read the operator’s manual carefully. Learn the saw’s applications and limitations as well as the specific poten ...

  • Homelite UT10562 - page 4

    P age 4 — English W ARNING: The war nings, labels, and instructions found in this section of the operator’ s manual ar e for you r safety . Failur e to fol low all ins truct ions may result in serious personal injury .  Do not cut vines and/or small underbrush (a diameter of less than 3 in.).  Muf fle r su rfa ces are v ery h ot d u ...

  • Homelite UT10562 - page 5

    P age 5 — English SPECIFIC SAFETY RULES Maintenance section of this manual. If the saw chain still moves at idle speed after adjustment has been made, contact an authorized service center for adjustment and discontinue use until the repair is made. REFUELING (DO NOT SMOKE!)   To reduce the risk of fire and burn injury , handle fuel with ...

  • Homelite UT10562 - page 6

    P age 6 — English SYMBOLS Some of the following symbols may be used on this pr oduct. Please study them and learn their mean- ing. Proper interpr etation of these symbols will allow you to operate the product better and safer . SYMBOL NAME DESIGNA TION/EXPLANA TION Safety Alert Precautions that involve your safety . Read The Operator’ s Manual ...

  • Homelite UT10562 - page 7

    P age 7 — English SERVICE Se rvi cin g r equ ir es ext r eme car e a nd k now le dge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SER VICE CENTER for repair . When servicing, use only identical replacement parts. W ARNING: SA VE THESE INSTRUCTIONS W ARNING ...

  • Homelite UT10562 - page 8

    P age 8 — English GLOSSAR Y OF TERMS Bucking The pr ocess of cross cutting a felled tr ee or log into lengths. Chain Brake A device used to stop the saw chain. Chain Saw Powerhead A chain saw without the saw chain and guide bar . Clutch A mechanism for connecting and disconnecting a driven member to and fr om a rotating source of power . Drive Sp ...

  • Homelite UT10562 - page 9

    P age 9 — English PRODUCT SPECIFICA TIONS FEA TURES Bar length: UT10540, UT10542 ................................. 14 in. UT10560, UT10562 ................................. 16 in. UT10580, UT10582, UT10585, UT10918 .. 18 in. Chain pitch ............................................. .375 in. Chain gauge ........................................... ...

  • Homelite UT10562 - page 10

    P age 10 — English STOP IGNITION SWITCH FUEL CAP PRIMER BULB CHOKE LEVER FEA TURES Fig. 1b KNOW YOUR CHAIN SA W See Figures 1a - 1b . The safe use of this product r equires an understanding of the information on the product and in this operator’ s manual as well as a knowledge of the project you are attempting. Before use of this product, famil ...

  • Homelite UT10562 - page 11

    P age 11 — English W ARNING: Do not allow familiarity with this product to make you careless. Remember that a car eless fraction of a second is sufficient to inflict seri- ous injury . W ARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into you ...

  • Homelite UT10562 - page 12

    P age 12 — English APPLICA TIONS Y ou may use this product for the purposes listed below:  Basic limbing, felling, and bucking  Removing buttress roots W ARNING: Al way s sh ut of f en gin e be for e fu eli ng . Nev er add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before st ar tin g t ...

  • Homelite UT10562 - page 13

    P age 13 — English OPERA TION OXYGENA TED FUELS Some conventional gasolines ar e blended with alcohol or an ether compound. These gasolines are collectively referr ed to as oxygenated fuels. T o meet clean air standards, some areas of the United States and Canada use oxygenated fuels to help reduce emissions. If usin g an oxyg enat ed fuel, make ...

  • Homelite UT10562 - page 14

    P age 14 — English ADDING BAR AND CHAIN LUBRICANT See Figure 3. Use HO MELITE Bar and Chain Lu bricant. It is de sign ed for cha ins an d ch ain oi ler s, and is formulat ed to per form o ver a wide temperature range with no dilution required. Chain saw should use appro ximately one tank of lubricant per tank of fuel. NOTE: Do not use dirty , use ...

  • Homelite UT10562 - page 15

    P age 15 — English STOP STOP STOP STOP OPERA TION  Place the chain saw on level ground and ensure that no objects or obstructions are in the imme - dia te vicin ity tha t cou ld come in cont act wit h the bar and chain.  Hold the front handle firmly with your left hand and put your right foot onto the base of the rear handle. To start a ...

  • Homelite UT10562 - page 16

    P age 16 — English STOP STOP OPERA TION  Pull starter grip until engine runs, but no more than 5 times. If engine does not start after 5 pulls, use cold engine starting procedure.  Sq uee ze and re lea se the thr ott le trig ger to ret urn the engine to idle. STOPPING THE ENGINE See Figures 12 - 13. Release the throttl e trigger and l ...

  • Homelite UT10562 - page 17

    P age 17 — English W ARNING: THE SAW CHAIN SHOULD NEVER TURN A T IDLE. Turn the idle speed screw “T” counter- clockwise to reduce the idle RPM and stop the chain, or contact an authorized service center for adjustment and discontinue use until the repair is made. Serious personal injury may result from the saw chain turning at idle. PULL AND ...

  • Homelite UT10562 - page 18

    P age 18 — English OPERA TION KICKBACK PRECAUTIONS See Figures 16 - 17. Rotatio nal kickback occurs when the moving chain contacts an object at the Kickback Danger Zone of the guide bar . The result is a lightning-fast reverse reaction, which kicks the guide bar up and back towards the operator . This reaction can cause ...

  • Homelite UT10562 - page 19

    P age 19 — English Fig. 19 Fig. 20 OPERA TION PROPER CUTTING ST ANCE See Figure 19.   Bal anc e yo ur we igh t wi th b oth f eet o n so lid ground.  Keep left arm with elbow locked in a “straight arm” position to withstand any kickback force.  Keepyourbodytotheleftofthech ...

  • Homelite UT10562 - page 20

    P age 20 — English OPERA TION FELLING TREES HAZARDOUS CONDITIONS W ARNING: Do not fell trees during periods of high wind or heavy precipitation. Wait until the hazardous weather has ended. When felling a tree, it is important that you heed the following warnings to prevent possible serious injury .   Do not cut down trees having an extre ...

  • Homelite UT10562 - page 21

    P age 21 — English WEDGE Fig. 24 HORIZONT AL CUT VERTICAL CUT LOOSE SECTION Fig. 25 OPERA TION This notch should be cleaned out to leave a straight line. To keep the weight of the wood off the saw, always make the lower cut of the notch before the upper cut.  Make the backcut level and horizontal, and at a minimum of 2 in. above the horizon ...

  • Homelite UT10562 - page 22

    P age 22 — English OPERA TION BUCKING See Figure 26. Bucking is the term used for cutting a fallen tree to the desired log length.  Cut only one log at a time.  Support small logs on a saw horse or another log while bucking.  Keep a clear cutting area. Make sure that no obje cts ca n cont act th e gui ...

  • Homelite UT10562 - page 23

    P age 23 — English LOAD FINISHING CUT 1ST CUT 1/3 DIA LOG SUPPORTED A T ONE END LOG SUPPORTED A T BOTH ENDS FINISHING CUT 1ST CUT 1/3 DIA LOAD Fig. 28 OVERBUCKING OPERA TION BUCKING LOGS UNDER STRESS See Figure 28. Make the first bucking cut 1/3 of the way thr ough the log and finish with a 2/3 cut on the opposite side. As you cut the log, it wil ...

  • Homelite UT10562 - page 24

    P age 24 — English LIMBING AND PRUNING See Figures 31 - 32.  Work slowly, keeping both hands on the saw with a firm grip. Maintain secure footing and balance.   Keep thetree between you and the chainwhile limbing.  Do not cut from a l adder. This is extremely dan - gerous. Leave this operation for p ...

  • Homelite UT10562 - page 25

    P age 25 — English W ARNING: When servicing, use only identical Homelite replacement parts. Use of any other parts may create a hazar d or cause product damage. W ARNING: Always wear safety goggles or safety glasses with side shields during power tool opera tion or when blowing dust. If operation is dusty , also wear a dust mask. GENERAL MAINTENA ...

  • Homelite UT10562 - page 26

    P age 26 — English CUTTERS BAR GROOVE CHAIN DRIVE LINKS Fig. 38 MAINTENANCE CHAIN ROT A TION CHAIN DRIVE LINKS Fig. 37  Make sure the chain brake is not set by pulling the chain brake lever/hand guard towards the front handle to the run position. NOTE: When replacing the guide bar and chain, always use the specified bar and chain listed in ...

  • Homelite UT10562 - page 27

    P age 27 — English Fig. 40 ROT A TE CLUTCH COVER LOCK KNOB CLOCKWISE TO SECURE CHAIN TENSIONING DIAL CLUTCH COVER LOCK KNOB MAINTENANCE The chain is corr ectly tensioned when there is no sag on the underside of the guide bar , the chain is snug, but it can be tur ned by hand without binding. Ensure that the chain brake is not set. NOTE: If chain ...

  • Homelite UT10562 - page 28

    P age 28 — English MAINTENANCE ADJUSTING THE CHAIN TENSION See Figures 44 - 46. W ARNING: Nev er touc h or adj ust the chai n whil e the engin e is running. The saw chain is very sharp. Always wear protective gloves when performing main- tenance on the chain.  Stop the engine before setting the chain ten- sion.  Slightly loosen the cl ...

  • Homelite UT10562 - page 29

    P age 29 — English Fig. 47 RAKER (DEPTH GAUGE) CLEARANCE Fig. 48 MAINTENANCE CHAIN MAINTENANCE See Figures 47 - 48. CAUTION: Check that the switch is in the STOP “ ” posi - tion before you work on the saw. Use only a low-kickback chain on this saw . This fast- cutting chain provides kickback reduction when properly maintained. For smooth and ...

  • Homelite UT10562 - page 30

    P age 30 — English MAINTENANCE SHARPENING THE CUTTERS See Figures 49 - 52. Be careful to file all cutters to the specified angles and to the same length, as fast cutting can only be obtained when all cutters are uniform. W ARNING: The saw chain is very sharp. Always wear pro- tect ive glove s when perfo rming mainten ance to the chain to prevent ...

  • Homelite UT10562 - page 31

    P age 31 — English INCORRECT MORE THAN 30° TOP PLA TE FILING ANGLE LESS THAN 30° Fig. 53 30° CORRECT INCORRECT BACKWARD SLOPE SIDE PLA TE FILING ANGLE Fig. 54 80° CORRECT HOOK FLA T FILE DEPTH GAUGE JOINTER Fig. 56 RESTORE ORIGINAL SHAPE BY ROUNDING THE FRONT Fig. 57 MAINTENANCE TOP PLA TE FILING ANGLE See Figure 53.  CORRECT 30° ...

  • Homelite UT10562 - page 32

    P age 32 — English MAINTENANCE MAINT AINING THE GUIDE BAR See Figure 58. CAUTION: Make sure the chain has stopped befor e you do any work on the saw. Every week of use, reverse the guide bar on the saw to distribute the wear for maximum bar life. The bar should be cleaned every day of use and checked for wear and damage. Feathering or burring of ...

  • Homelite UT10562 - page 33

    P age 33 — English STOP STOP MAINTENANCE Use the following instructions to tighten the mount - ing scr ew of the nose guar d. These are specially hardened screws. If you cannot install the screw tightly , replace both the screw and the SAFE-T -TIP ® before further operation. NOTE: Do not replace the screw with an ordinary screw . Use only identi ...

  • Homelite UT10562 - page 34

    P age 34 — English Fig. 65 STOP CYLINDER COVER SCREWS Fig. 64 IDLE SPEED SCREW “T” ST ARTER COVER VENTS Fig. 63 MAINTENANCE CLEANING THE ST ARTER UNIT See Figure 63. Use a brush or compressed air to keep the cool- ing vents of the starter assembly free and clean of debris. ADJUSTING THE CARBURETOR See Figure 64. Before adjusting the carbur et ...

  • Homelite UT10562 - page 35

    P age 35 — English MAINTENANCE  Remove the screws and cylinder cover as described previously.  Clean the cylinder fins.  Lift the chain brake over the post.  Lay the chain saw on its side with the bar and chain on the ground.  Remove the chain oil and fuel caps.  Remove the three screws that hold the starter housing in place. ? ...

  • Homelite UT10562 - page 36

    P age 36 — English CHECKING THE FUEL FIL TER See Figure 69. Check the fuel filter periodically . If contaminated or damaged , have fuel filter replaced by an authorized service center. REPLACING THE SP ARK PLUG See Figure 70. This engine uses a Champion RCJ-6Y with .025 in. electrode gap. Use an exact replacement and replace every 50 hours or mor ...

  • Homelite UT10562 - page 37

    P age 37 — English MAINTENANCE STORING THE PRODUCT  Cl ean all fo rei gn mat eri al fro m th e pro du ct. Stor e it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.  Abide by all Federal and local regulations for the safe stor ...

  • Homelite UT10562 - page 38

    P age 38 — English TROUBLESHOOTING Pr oblem Possible Cause Solution Engine will not start. [Make sure ign itio n swi tch is in the RUN ( l ) posi- tion.] No spark. Engine is flooded. Cle an or rep lace spar k plug . Reset spar k plug gap. Refe r to Spark Plug Replacement earlier in this manual. With the ignition switch OFF , remove spark plug. Mo ...

  • Homelite UT10562 - page 39

    P age 39 — English TROUBLESHOOTING Pr oblem Possible Cause Solution En gin e st ar ts , ru ns, and accelerates but will not idle. Chain turns at idle. Carburetor r equires adjustment to idle speed. Carburetor r equires adjustment to idle speed. Air leak in the intake system. T ur n idle speed scr ew “T” clockwise to increase idle speed. Refer ...

  • Homelite UT10562 - page 40

    P age 40 — English LIMITED WARRANTY ST A TEMENT Homelite Consumer Pr oducts, Inc., (“Homelite”) warrants to the original r etail purchaser that this HOMELITE brand outdoor pr oduct is fr ee from defect in material and workm anship and agr ees to repai r or r eplace, at Homel ite’ s, discr etion, any defe ctive prod uct fr ee of char ge with ...

  • Homelite UT10562 - page 41

    P age 41 — English W ARRANTY THE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) ST A TEMENT ONL Y APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS. The U.S. Environmental Protection Agency (EP A), the California Air Resources Board (CARB), and Homelite Consumer Products, Inc., are pleased to explain the Emissions Contr ol System W ...

  • Homelite UT10562 - page 42

    P age 42 — English EMISSIONS MAINTENANCE SCHEDULE AND W ARRANTED P ARTS LIST Emissions Parts Inspect Clean Replace Clean Every Replace Before Every Every 25 Hours 25 Hours Every Each Use 5 Hours or Y early or Y early 50 Hours AIR FIL TER ASSY includes: Filter .................................................................. X ................... ...

  • Homelite UT10562 - page 43

    P age 3 — F rançais A VERTISSEMENT : Lire et veiller à bien comprendr e toutes les instructions . Le non-respect des instructions ci-dessous peut entraîner un choc électrique, un incendie et des blessures graves. LIRE TOUTES LES INSTRUCTIONS  Ap pren dre à c onnaî t re l’ out il. Li re a tt en ti v em en t le ma nu el d ’ ut il is ...

  • Homelite UT10562 - page 44

    P age 4 — F rançais A VERTISSEMENT : Les ave rtis seme nts, autoc olla nts et instr ucti ons c o n t e n u s d a n s c e t t e s e c t i o n d u m a n u e l concernent la sécurité. Le non-r espect de t ou t es l es i ns t ru c ti o ns p eu t e n tr a î ne r d e s blessures graves. RÈGLES DE SÉCURITÉ GÉNÉRALES  Gar der tou tes les p ...

  • Homelite UT10562 - page 45

    P age 5 — F rançais RÈGLES DE SÉCURITÉ P AR TICULIÈRES ■  T oujours maintenir la scie à deux mains lorsque le moteur tour ne. La tenir fermement, les doigts et pouces encerclant les poignées. ■  Ne jam ais la iss er qui con que n’ay ant pas re çu des instructions d’utilisation appropriées utiliser la scie. Cette règl ...

  • Homelite UT10562 - page 46

    P age 6 — F rançais SYMBOLES Certain s des symboles ci-dessous peuvent être utilisés sur ce pro duit. V eiller à les étudie r et à appr endr e leur signification. Une interprétation correcte de ces symboles permettra d’utiliser ce produit plus efficacement et de réduir e les risques. SYMBOLE NOM D? ...

  • Homelite UT10562 - page 47

    P age 7 — F rançais DÉP ANNAGE Le dépannage exigeant des précautions extrêmes et la connaissance du système, il ne doit être confié qu’à un technicien de service qualifié. En ce qui concerne les réparations, nous recommandons de confier l’outil au CENTRE DE RÉP ARA TIONS AGRÉÉ  le plus pr oche. Utiliser exclusivem ...

  • Homelite UT10562 - page 48

    P age 8 — F rançais GLOSSAIRE T ronçonnage Coupe transversale d’un arbre abattu ou d’une bille de bois pour le débiter en tronçons. Frein de chaîne Dispositif permettant d’arrêter la scie à chaîne. Bloc moteur de scie à chaîne Scieàchaînesanslachaîneetleguide. Embrayage Mécanisme pour connecter et déco ...

  • Homelite UT10562 - page 49

    P age 9 — F rançais SPÉCIFICA TIONS CARACTÉRISTIQUES Longueur du guide :  UT10540,UT10542 .................... 35cm(14po)  UT10560,UT10562 .................... 40cm(16po)  UT10580,UT10582,  UT10585,UT10918 .................... 45cm(18po) Pas de la chaîne .....................  9,5mm? ...

  • Homelite UT10562 - page 50

    P age 10 — F rançais CARACTÉRISTIQUES POUR SE F AMILIARISER A VEC LA SCIE À CHAÎNE V oir les figures 1a et 1b . L ’utilisation sûre de ce pr oduit exige une  comprehension des renseignements figurant sur le produit et contenus dans le manuel d’utilisation, ainsi qu’une bonne connaissance du projet entrepris. Avant ...

  • Homelite UT10562 - page 51

    P age 11 — F rançais A VERTISSEMENT : Ne pas laisser la familiarité avec ce produit fair e oubl ier la prudenc e. Ne pas oublie r qu’u ne fra ctio n de secon de d’i natt ent ion peut entr aîne r des blessures graves. A VERTISSEMENT : T ou jo ur s po rt er  de s l un et te s  de  sé c ur it é ét an ch es ou à coqu e ...

  • Homelite UT10562 - page 52

    P age 12 — F rançais APPLICA TIONS Ce produit peut être utilisé pour les applications ci-dessous :  Ébranchage, abattage et débitage  Élimination des racines échasses A VERTISSEMENT : T oujours arrêter le moteur avant  l’approvisionnement en carburant. Ne jamais remplir le réservoir d’une machine lorsque le ...

  • Homelite UT10562 - page 53

    P age 13 — F rançais CARBURANTS OXYGÉNÉS Certains carburants standard sont mélangés avec de l’alcool ou de l’éther . Ces carburants sont généralement appelés carburants oxygénés. Pour la conformité aux normes antipollution, certaines régions des États-Unis et du Canada utilisent des carburants oxygénés ...

  • Homelite UT10562 - page 54

    P age 14 — F rançais APPOINT DE LUBRIFIANT POUR GUIDE ET CHAÎNE V oir la figure 3. Utiliser de lubrifiant HOMELITE pour guide et chaîne. Cette huile, conçue pour les chaînes et huileurs de chaîne, est formulée pour fonctionner dans une vaste plage de températures et n’a pas besoin d’êtr e diluée. Cette scie à c ...

  • Homelite UT10562 - page 55

    P age 15 — F rançais COMPLÈTEMENT OUVERT STOP STOP UTILISA TION A VERTISSEMENT : Garder le corps à gauche de la ligne de chaîne. Ne jamais cheva ucher la scie ou la chaîne ou se pencher au-delà de la ligne de chaîne.  Placer la scie sur un sol plan et veiller à ce qu’aucun objet ou obstacle risquant d’être heurté par le guide ...

  • Homelite UT10562 - page 56

    P age 16 — F rançais STOP STOP UTILISA TION Démarrage du moteur chaud :  Mettre le commutateur en position de MAR CHE ( I ) .  S’assurer quele frein de chaîneest enposition de marche en tirant le levier / protège-main en arrière.  Mettre le levier d’étrangleur en po ...

  • Homelite UT10562 - page 57

    P age 17 — F rançais  Si la chaîne tour ne lorsque le moteur est au ralenti tourner la vis de ralenti « T » vers la gauche pour réduire le régime et arrêter la rotationdelachaîne.Silachaînecontinuede  tou rner au rale nti après avoi r ef fect ué le régl age, confier la sci ...

  • Homelite UT10562 - page 58

    P age 18 — F rançais UTILISA TION PRÉCAUTIONS À PRENDRE POUR ÉVITER LE REBOND V oir les figures 16 et 17. Le rebond rotatif se produit lorsque la portion de la chaîne en mouvement se trouvant dans la zone de dangerde r ebond duguide heurteunobjet. Ilen résulte une réaction fulgurante, pr ojetant le guide vers ...

  • Homelite UT10562 - page 59

    P age 19 — F rançais A VERTISSEMENT : N E P AS  ac t io nn e r la  g âc he tt e d’accélérateur avec la main ga uch e en tena nt la poig né e avant avec la main droite. Ne jamais laisser une partie du corps quelconque se trouver dans la ligne de chaîne pendant l’utilisation de la scie. LIGNE DE CHAÎNE BRAS TENDU POUCE AU- ...

  • Homelite UT10562 - page 60

    P age 20 — F rançais UTILISA TION  Commencer la coupe avec la scie appuyée contre la bille.  M ain te nir le mot eu r à ple in rég ime pen dan t tou te la durée de la coupe.  Laisser la scie effectuer le travail, ne la pousser que  lég èr ement  ver s le bas . Une for ce exce ssi ve pourrait endomm ...

  • Homelite UT10562 - page 61

    P age 21 — F rançais COIN Fig.24 UTILISA TION MÉTHODE CORRECTE D’ABA TT AGE V oir les figures 21 à 24.  Prévoir un chemin de repli (ou plusieurs, en cas où le chemin prévu serait bloqué). Déblayer les alentours immédiats de l’arbre et s’assur er qu’aucun obstacle n’encombr e le chemin de repli prévu. Déblayer le chem ...

  • Homelite UT10562 - page 62

    P age 22 — F rançais ÉLIMINA TION DES RACINES ÉCHASSES V oir la figure 25. Une racine échasse est une grosse racine qui s’étend à partir du tronc au-dessus du sol. Retirer les grosses raci nes é chass es av ant d ’abat tre l’ar br e. Prat iquer d’ab ord l’enta ille horiz ontale dans la racine échasse, pui ...

  • Homelite UT10562 - page 63

    P age 23 — F rançais UTILISA TION CHARGE COUPE DE FINITION 1ÈRE COUPE 1/3 DIAM BILLE SOUTENUE À UNE EXTRÉMITÉ BILLE SOUTENUE AUX DEUX EXTRÉMITÉS COUPE DE FINITION 1ÈRE COUPE 1/3 DIAMÈTRE CHARGE Fig.28 COUPE P AR LE DESSUS DÉBIT AGE DE BILLES SOUS CONTRAINTE V oir la figure 28. Pratiquer la première entaille à 1/3 ...

  • Homelite UT10562 - page 64

    P age 24 — F rançais ÉBRANCHAGE ET ÉMONDAGE V oir les figures 31 et 32.  T ravailler lentement et tenir la scie fermement à deux mains. Se tenir bien campé et en  équilibre. ■  Garder le tronc entr e le corps et la scie pendant la coupe.  Ne pa s u ti li se r la sc ie en se ...

  • Homelite UT10562 - page 65

    P age 25 — F rançais A VERTISSEMENT : Utiliser exclusivement des pièces Homelite id ent iq ue s à ce ll es d’o rig ine po ur le s rép ara ti ons . L ’usage de toute autre pièce pourrait créer une situation dangereuse ou endommager l’outil. A VERTISSEMENT : T oujours porter des lunettes de sécurité  ? ...

  • Homelite UT10562 - page 66

    P age 26 — F rançais MAILLONS D’ENTRAÎNEMENT Fig.37 DENTS ROT A TION DE LA CHAÎNE ENTRETIEN NOTE : Lors du remplacement du guide et de la chaîne, toujours utiliser les pièces indiquées à la section Combinaisons de guide et chaîne , plus loin dans ce manuel.   T ouj ou rs por te r des  gan ts lor s de  la ? ...

  • Homelite UT10562 - page 67

    P age 27 — F rançais RAINURE DU GUIDE MAILLONS D’ENTRAÎNEMENT Fig.38 ENTRETIEN  Maintenir l’extrémité du guide et serrer fermement le bouton de verrouillage du couvercle de l’embrayage. Une chaîne est correctement tendue lorsqu’elle ne présente pas de mou au dessous du guide et qu’elle est bien serrée, ...

  • Homelite UT10562 - page 68

    P age 28 — F rançais ENTRETIEN Fig.41 Fig.42 Fig.43 RÉGLAGE DE LA TENSION DE CHAÎNE V oir les figures 44 à 46. A VERTISSEMENT : Ne jamais toucher ou régler la chaîne lorsque le moteur tourne. La chaîne est extrêmement tranchante. T oujours porter des gants lors de l’entretien de la chaîne.  Couper le ...

  • Homelite UT10562 - page 69

    P age 29 — F rançais Fig.47 JEU DU LIMITEUR DE PROFONDEUR ≈ 1,27 mm (0,050 po) Fig.46 Fig.45 Fig.48 ENTRETIEN ENTRETIEN DE LA CHAÎNE V oir les figures 47 et 48. A TTENTION : T oujours vérifier que le commutateur est en position STOP  « » avant de travailler sur la scie. Utiliser exclusivement de ...

  • Homelite UT10562 - page 70

    P age 30 — F rançais PLAQUE LA TÉRALE ENTRETIEN AFFÛT AGE DES DENTS V oir les figures 49 à 52. V eiller à limer toutes les dents aux angles spécifiés et à la même longueur , car une coupe rapide ne peut être obtenue qu’avec des dents uniformes. A VERTISSEMENT : La chaîne est extrêmement tranchante. T oujours porter des gant ...

  • Homelite UT10562 - page 71

    P age 31 — F rançais INCORRECT PLUS DE 30° ANGLE D’AFFÛT AGE DE LA PLAQUE SUPÉRIEURE MOINS DE 30° Fig.53 30° CORRECT INCORRECT ANGLE ARRIÈRE ANGLE D’AFFÛT AGE DE LA PLAQUE LA TÉRALE Fig.54 80° CORRECT CROCHET LIME PLA TE COUPLEUR DE LIMITEUR DE PROFONDEUR Fig.56 RENDRE LA FORME D’ORIGINE EN ARRONDISSANT L’A V ANT Fig.? ...

  • Homelite UT10562 - page 72

    P age 32 — F rançais ENTRETIEN endommager les maillons d’entraînement adjacents avec le bord de la lime. ■  Les limiteurs de pro fondeur doivent être ajustés avec la lime plate, dans le sens dans lequel les dents adjacentes ont été af fûtées avec la lime ronde. V eiller à ne pas toucher la face de la gou ...

  • Homelite UT10562 - page 73

    P age 33 — F rançais STOP ENTRETIEN A VERTISSEMENT : Bien que le dispositif antirebond SAFE-T -TIP ® ait été installé en usine, vérifier le serrage de sa vis de montage avant chaque utilisation. Suivr e les instructions ci-dess ous pour serrer la vis de montage sur la garde. La vis est en acier spécialem ...

  • Homelite UT10562 - page 74

    P age 34 — F rançais Fig.65 STOP CULASSE VIS ENTRETIEN Fig.64 Fig.63 OUVERTURES DU CAPOT DU ST ARTER VIS DE RALENTI EN « T » A TTENTION : S’assurer que le filtr e à air est correctement remplacé avant de r emonter l’ensemble. Ne jam ais fair e tourne r le mote ur san s fil tr e à air , car il pourrait ê ...

  • Homelite UT10562 - page 75

    P age 35 — F rançais ENTRETIEN A VERTISSEMENT Ne jamais utiliser la scie sans que toutes les pi èc es, y com pr is le cap ot du mot eu r et le boî ti er du lanceur soient solidement installées. Les pièces pouvant se briser et être pr ojetées, confier les réparations du volant moteur et de l’embrayage à un centre de réparation agréé. ...

  • Homelite UT10562 - page 76

    P age 36 — F rançais NETTOYER LE FREIN DE CHAÎNE Fig.71 FIL TRE À CARBURANT VÉRIFICA TION DU FIL TRE À CARBURANT V oir la figure 69. Vérifier le f iltre à carburant régulièrement. Le remplacement du filtr e à carburant doit être confié à un centre de réparations agréé en cas de contamination ou de dommages. REMPLACEMENT DE LA B ...

  • Homelite UT10562 - page 77

    P age 37 — F rançais REMISAGE LE PRODUIT  Nettoyer soigneusement le produit. La remiser dans un endroit bien aéré, inaccessible aux enfants. La tenir à l’écart de produits corrosifs, tels que les produits chimiques de jardinage et le sel de dégivrage.   Se conformer à toutes les réglementations locales e ...

  • Homelite UT10562 - page 78

    P age 38 — F rançais DÉP ANNAGE Pr oblème Cause possible Solution Le moteur ne démarre pas [S’assurerque le commutateur d’allumage est en position de MARCHE ( l ) position.] Pas d’étincelle. Moteur noyé. Nett oyer ou remp lacer la bougie . Régler l’écar temen t de l’éle ctr ode. V oir Remplacement de la bougie plus haut d ...

  • Homelite UT10562 - page 79

    P age 39 — F rançais DÉP ANNAGE Pr oblème Cause possible Solution Le guide et la chaîne chauffent et fument. Réservoir d’huile vide. T ension de la chaîne  excessive. Le grai sseur ne fonc tionne pas. Le réservoir d’huile doit être rempli à chaque approvisionnement en carburant. Pour la tension de chaîne suivre les instr ...

  • Homelite UT10562 - page 80

    P age 40 — F rançais GARANTIE DÉCLARA TION DE GARANTIE LIMITÉE HomeliteConsumer Products,Inc. («Homelite »)garantità l’acheteur original au détail que ce produit de plein air de mar que HOMELIT E est exempt  de tout  vice de matér iau ou de fabrication et s’engage à réparer ...

  • Homelite UT10562 - page 81

    P age 41 — F rançais GARANTIE L ’ÉNONCÉ DE CALIFORNIA AIR RESOURCES BOARD (CARB) QUI SUIT , S’APPLIQUE SEULEMENT AUX NUMÉROS DE MODÈLES QUI DOIVENT SE CONFORMER AUX EXIGENCES DE CARB. L ’U.S. Environmental Protection Agency (EP A), le Califor nia Air Resources Board (CARB)etHomeliteConsumerProd ...

  • Homelite UT10562 - page 82

    P age 42 — F rançais PROGRAMME D’ENTRETIEN DU SYSTÈME D’ÉMISSIONS ET LISTE DES PIÈCES GARANTIES P ièces du système Inspecter avant Nettoyer toutes Remplacer toutes Nettoyer toutes Remplacer toutes chaque utilisation le 5 heures de les 25 heures ou les 25 heures ou les 50 heures fonctionnement chaque année chaque année FIL TRE À AIR ? ...

  • Homelite UT10562 - page 83

    P ágina 3 — Español ADVER TENCIA: Lea y c ompr end a tod as las i nst ru ccio nes . El in cum pl imi en to d e l as in str uc ci one s se ña la das aba jo puede causar descarg as eléctricas, incen dios y lesi ones seri as. LE A TOD AS L AS IN STRUCCI ONES  F amiliaríce se con la herramienta. L e a cuidadosa mente el manual del oper ado ...

  • Homelite UT10562 - page 84

    P ágina 4 — Español REGLAS DE SEGURIDAD GENERALES  S ie mp re t r as la de l a mo tos ie rr a c on e l m oto r ap agad o y e l fre no d e la ca den a pu esto , l a barr a guía y la cadena de l a sier ra haci a atrás y el sile nciador alejado de l cuerpo. Al tran spor tar la motosierr a, use la funda c orresp ondiente de la bar ra guía. ...

  • Homelite UT10562 - page 85

    P ágina 5 — Español REGLAS DE SEGURIDAD ESPECÍFICAS   Nunca permita utilizar la sierra a quien no haya r ecibi do instru ccio nes adecu adas sobr e la form a correcta de emplear la unidad. Esto se apli ca tant o a las sierras alquiladas como a las propias.   Antes de arrancar el motor , asegúr ese de que no esté tocando nin ...

  • Homelite UT10562 - page 86

    P ágina 6 — Español SÍMBOLOS Es posible que se empleen en este producto algunos de los siguientes símbolos. Le suplicamos estudiarlos y aprender su significado. Una correcta interpretación de estos símbolos le permitirá utilizar mejor y de manera más segura la producto. SÍMBOLO NOMBRE DENOMINACIÓN / EXPLICACIÓN Alerta de seguridad Pr e ...

  • Homelite UT10562 - page 87

    P ágina 7 — Español SERVICIO El servicio de la herramienta requier e extremo cuidado y conocimientos técnicos, por lo cual sólo debe ser efectuado por un técnico de servicio calificado. Para dar servicio a la herramienta, le sugerimos llevarla al CENTRO DE SERVICIO AUTORIZADO de su pr eferencia para que la repar en. Al dar servicio a la unid ...

  • Homelite UT10562 - page 88

    P ágina 8 — Español GLOSARIO DE TÉRMINOS T ronzado Es el proceso de cortar transversalmente un árbol o tronco talado en tramos. Freno de la cadena Es un dispositivo empleado para detener la cadena de la sierra. Cabeza motriz de la motosierra Es la motosierra sin la cadena de aserrar ni la barra guía. Embrague Es un mecanismo para conectar y ...

  • Homelite UT10562 - page 89

    P ágina 9 — Español ESPECIFICACIONES DEL PRODUCTO CARACTERÍSTICAS Longitud de la barra:   ................    ................    ...

  • Homelite UT10562 - page 90

    P ágina 10 — Español CARACTERÍSTICAS F AMILIARÍCESE CON LA MOTOSIERRA V ea las figuras 1a y 1b . Para usar este producto con la debida seguridad se debe comprender la información indicada en la producto misma y en este manual, y se debe compr ender también el trabajo que intenta realizar . Antes de usar este producto, familiarícese con tod ...

  • Homelite UT10562 - page 91

    P ágina 11 — Español ADVER TENCIA: No permita que su familarización con este                 que un descuido de un instante es suficiente para causar una lesión grave. ADVER TENCIA: Cuando utilice herramien ...

  • Homelite UT10562 - page 92

    P ágina 12 — Español APLICACIONES Este producto puede emplearse para los fines enumerados abajo:  Operaciones básicas de desramado, tala y tronzado  Eliminación de raíces zancas ADVER TENCIA:        el ...

  • Homelite UT10562 - page 93

    P ágina 13 — Español FUNCIONAMIENTO COMBUSTIBLES OXIGENADOS A l g u n a s g a s o l i n a s c o n v e n c i o n a l e s e s t á n mezclad as con alcohol o con un compuesto de éte r . Esta s gaso linas se den omina n cole ctiva mente combustibles oxigenados. Para satisfacer las normas de limpieza del air e, en algunas ár eas geográficas de E ...

  • Homelite UT10562 - page 94

    P ágina 14 — Español  Llene el taque de aceite cada vez que reabastezca de combusible el motor . FUNCIONAMIENTO DEL FRENO DE LA CADENA V ea las figuras 4 y 5. V erifique las condiciones de funcionamiento del freno de la cadena cada vez antes de usar la unidad.  Accione el freno de la cadena rotando su mano izquierda alrededor del ma ...

  • Homelite UT10562 - page 95

    P ágina 15 — Español STOP STOP STOP STOP FUNCIONAMIENTO Para arrancar con el motor frío:  Coloque el interruptor de encendido en la posición de FUNCIONAMIENTO ( I ) .  Asegúrese de que el freno de la cadena esté en la posición de funcionamiento; para ello, tire de la palanca (la pr otección de la mano) hacia atrás.  Opr ...

  • Homelite UT10562 - page 96

    P ágina 16 — Español STOP STOP FUNCIONAMIENTO de la palanca (la pr otección de la mano) hacia atrás.          a la posición anegación máxima e inmediatamente después, empújela a la posición FUNCION ...

  • Homelite UT10562 - page 97

    P ágina 17 — Español AJUSTE DE LA MARCHA LENT A V ea la figura 14.          no funciona en march a lent a, gir e el tornillo d e marcha lenta “T” ha ci a la de r ec ha pa ra aum ent ar la velocidad ...

  • Homelite UT10562 - page 98

    P ágina 18 — Español FUNCIONAMIENTO ADVER TENCIA: El  ocurre cuando la cadena en movimiento hace contacto con un objeto en la parte superior de la punta de la barra, o cuando la madera entra y pellizca la cadena de la sierra en el punto de corte. El contacto de la parte superior de la punta de la barra con la ...

  • Homelite UT10562 - page 99

    P ágina 19 — Español EL BRAZO RECTO EL PULGAR BAJO LA BARRA DEL MANGO PLANO DE LA CADENA   FUNCIONAMIENTO         siempre que esté funcionando el motor . Los dedos d ...

  • Homelite UT10562 - page 100

    P ágina 20 — Español FUNCIONAMIENTO que no haya leído este manual del operador o no hay a re ci bi do ins tru cc io nes ade cua da s so br e la forma correcta de emplear esta motosierra.         circunstantes, ...

  • Homelite UT10562 - page 101

    P ágina 21 — Español FUNCIONAMIENTO PROCEDIMIENTO CORRECTO P ARA T aLaR áRBOLeS V ea las figuras 21 a 24.  P lan ifi que su rut a de esc ape (o ruta s, en caso de que esté bloqueada la ruta planeada). Despeje el ár ea inmediata al árbol, y asegúrese de que no haya obstrucciones en la ruta planeada de retirada. Despeje la trayectoria ...

  • Homelite UT10562 - page 102

    P ágina 22 — Español CUÑA  CORTE HORIZONT AL CORTE VERTICAL P ARTE SUEL T A  CONTRAGOLPE  FUNCIONAMIENTO ADVER TENCIA: Nu nca cort e ha sta la mue sc a al efec tua r el cor te trasero. La bisagra, que es la parte de madera existente entre la muesca y el corte trasero, controla la c ...

  • Homelite UT10562 - page 103

    P ágina 23 — Español TRONZADO POR ARRIBA FUNCIONAMIENTO TRONZADO CON CUÑA V ea la figura 27.         grande para intr oducir una cuña de tr onzar suave sin tocar la cadena, debe utilizar la cuña para mantener ...

  • Homelite UT10562 - page 104

    P ágina 24 — Español           mientras realice el desramado.  No realice tareas de corte subido en una escalera. Es extremadamente peligroso. Deje tal operación a los profesionales.     ...

  • Homelite UT10562 - page 105

    P ágina 25 — Español ADVERTENCIA: Al dar servicio a la unidad, sólo utilice piezas de repuesto Homelite idénticas. El empleo de piezas diferentes puede ser peligroso o dañar el producto. ADVER TENCIA:        p rot ec ...

  • Homelite UT10562 - page 106

    P ágina 26 — Español ORIFICIO DEL P ASADOR DE TENSADO DE LA CADENA RANURA DE LA BARRA ESLABONES DE IMPULSIÓN DE LA CADENA  MANTENIMIENTO  ADVER TENCIA: Para evitar lesiones corporales serias, lea y comprenda todas las instrucciones de seguridad indicadas en esta sección.  ? ...

  • Homelite UT10562 - page 107

    P ágina 27 — Español MANTENIMIENTO    NOT A: Al r eemplazar la barra guía y la cadena, siempre utilice la barra y la cadena especificadas en la sección Combinaciones de barra y cadena , más adelante en este manual.  Póngase guantes al manipular la cadena y la barra. Estos ...

  • Homelite UT10562 - page 108

    P ágina 28 — Español  ≈ 1,27 mm (0,050 pulg.)   MANTENIMIENTO Luego gire el dial de tensado de la cadena hacia la izquierda. Levante la punta de la barra guía y vuelva a apretar firmemente la perilla de ajuste de la cubierta del embrague. Asegúrese de que la cadena se desplace s ...

  • Homelite UT10562 - page 109

    P ágina 29 — Español ESQUINA DE CORTE PLACA LA TERAL CALIBRE DE PROFUNDIDAD PUNTERA GARGANT A T ALÓN ORIFICIO DEL REMACHE PLACA SUPERIOR    MANTENIMIENTO  INSPECCIONE LA RUEDA DENT ADA DE IMPULSIÓN    ? ...

  • Homelite UT10562 - page 110

    P ágina 30 — Español MANTENIMIENTO ADVER TENCIA: La cadena de la sierra está sumamente afilada. Para evitar sufrir lesiones serias, siempr e lleve pu est os gua nte s pr otec to re s al efe ct uar labo r es de mantenimiento de la cadena.        ? ...

  • Homelite UT10562 - page 111

    P ágina 31 — Español FORMA INCORRECT A PENDIENTE HACIA A TRÁS ÁNGULO DE LIMADURA DE LA PLACA LA TERAL  80° FORMA CORRECT A GANCHO LIMA PLANA IGUALADOR DE CALIBRES DE PROFUNDIDAD  REST ABLEZCA LA FORMA ORIGINAL REDONDEANDO LA P ARTE FRONT AL  MANTENIMIENTO  ? ...

  • Homelite UT10562 - page 112

    P ágina 32 — Español MANTENIMIENTO  Desgaste dentro de los rieles de la barra que permite a la cadena descansar sobre su costado.  Barra guía doblada.  Rieles agrietados o rotos.  Rieles ensanchados. Lubrique semanalmente las barras guía dotadas de rueda dentada en la punta. Con una jeringa de grasa lubrique semanalmen ...

  • Homelite UT10562 - page 113

    P ágina 33 — Español STOP MANTENIMIENTO     de este intervalo mediante el siguiente método.  Apriete el tornillo con la llave hasta dejarlo ajustado.  De donde quedó ajustado, con un ...

  • Homelite UT10562 - page 114

    P ágina 34 — Español MANTENIMIENTO  TORNILLO DE MARCHA LENT A “T” AJUSTE DEL CARBURADOR V ea la figura 64. Antes de ajustar el carburador:  C o n u n c e p i l l o o a i r e c o m p r i m i d o l i m p i e las aberturas de ventilación de la tapa del arrancador .  Limpie el filtro de aire. Consulte el aparta ...

  • Homelite UT10562 - page 115

    P ágina 35 — Español MANTENIMIENTO ADVER TENCIA Nunca accione la sierra sin estar todas las partes de la misma mont adas firme mente , incl uida la tapa de la un idad de impul sión y e l a lojami ento del arrancador . Debido a que algunas piezas pueden fracturarse y presentar el peligro de salir disparadas, deje toda rep aració n del vol ante ...

  • Homelite UT10562 - page 116

    P ágina 36 — Español CAMBIO DE LA BUJÍA V ea la figura 70. En este motor se emplea una bujía Champion             ...

  • Homelite UT10562 - page 117

    P ágina 37 — Español ALMACENAMIENTO DE LA PRODUCTO  Limpie todo material extraño de la producto. Al ma ce ne la un ida d en un esp ac io bie n ve nt il ado ina cce sib le a los niñ os. Evi te que la uni dad ent re en contacto con agentes corrosivos como las sustancias químicas para el jardín y las sales para derretir el hielo.  ...

  • Homelite UT10562 - page 118

    P ágina 38 — Español SOLUCIÓN DE PROBLEMAS Pr oblema Causa posible Solución El motor no arranca. [Asegúrese de que el interr uptor de encendido esté en la posición de FUNCIONAMIENTO ( l ) .] No hay chispa. Está ahogado el motor . Limpie o reemplace la bujía, según sea necesario. Reajuste la separa ción inter electr ódic a de la bují ...

  • Homelite UT10562 - page 119

    P ágina 39 — Español SOLUCIÓN DE PROBLEMAS Pr oblema Causa posible Solución La barra y la cadena están muy calientes y despiden humo. Está vacío el tanque de aceite de la cadena. Demasiada tensión en la cadena. No está funcionando el lubricador . El tanque de aceite debe llenarse cada vez que se llena el de combustible.  ? ...

  • Homelite UT10562 - page 120

    P ágina 40 — Español GARANTÍA DECLARACIÓN DE LA GARANTÍA LIMIT ADA        original al menudeo que este producto para uso en el exterior   ? ...

  • Homelite UT10562 - page 121

    P ágina 41 — Español GARANTÍA LA SIGUIENTE DECLARACIÓN DE LA OFICINA DE RECURSOS A TMOSFÉRICOS DE CALIFORNIA (CARB) SE APLICA SÓLO A LOS MODELOS OBLIGADOS A CUMPLIR CON LOS REQUISITOS DE DICHO ORGANISMO. La Direc ción de Protecc ión Ambiental (EP A) de EE.UU., la Oficina de Recursos Atmosfé ricos  ? ...

  • Homelite UT10562 - page 122

    P ágina 42 — Español PROGRAMA DE MANTENIMIENTO P ARA EL CONTROL DE EMISIONES Y LIST A DE PIEZAS GARANTIZADAS Pieza s para el Inspeccionar cada vez Limpiar cada Reemplazar cada Limpiar cada Reemplazar cada control de antes de usar la unidad 5 horas de uso 25 horas de uso 25 horas de uso 50 Horas emisiones o cada año o cada año CONJUNTO DEL FIL ...

  • Homelite UT10562 - page 123

    P age / P ágina 43 NOTES / NOTES / NOT AS ...

  • Homelite UT10562 - page 124

    HOMELITE CONSUMER PRODUCTS, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 1-800-242-4672•www .homelite.com 987000-339 10-1-09 (REV :06) W ARNING: The eng ine exh aust fr om thi s pr oduct contains chemicals known to the State of California to cause cancer , birth defects, or other reproductive harm. CALIFORNIA PROPOSITION 65 SERVICE For ...

Manufacturer Homelite Category Chainsaw

Documents that we receive from a manufacturer of a Homelite UT10562 can be divided into several groups. They are, among others:
- Homelite technical drawings
- UT10562 manuals
- Homelite product data sheets
- information booklets
- or energy labels Homelite UT10562
All of them are important, but the most important information from the point of view of use of the device are in the user manual Homelite UT10562.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Homelite UT10562, service manual, brief instructions and user manuals Homelite UT10562. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Homelite UT10562.

Similar manuals

A complete manual for the device Homelite UT10562, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Homelite UT10562 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Homelite UT10562.

A complete Homelite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Homelite UT10562 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Homelite UT10562, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Homelite UT10562, that we can find in the current document
3. Tips how to use the basic functions of the device Homelite UT10562 - which should help us in our first steps of using Homelite UT10562
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Homelite UT10562
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Homelite UT10562 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Homelite UT10562?

Use the form below

If you did not solve your problem by using a manual Homelite UT10562, ask a question using the form below. If a user had a similar problem with Homelite UT10562 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)