English dropdown-ico

Manual Cisco Systems ATA 188

166 pages 1.92 mb
Download

Go to site of 166

Summary
  • Cisco Systems ATA 188 - page 1

    Corporate He adquarters Cisco System s, Inc . 170 West Ta sman Drive San Jos e, CA 95134 -1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco A T A 1 86 and Cisco A T A 1 88 Analog T elephone A daptor A dministrator ’ s Guide (SCCP) Text Pa rt Num ber: OL -3141-01 ...

  • Cisco Systems ATA 188 - page 2

    THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUC ...

  • Cisco Systems ATA 188 - page 3

    iii Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapto r Administra tor’s Guide (SCC P) OL-3141-01 CONTENTS Preface ix Overvi ew ix Audienc e ix Organi zation ix Conv enti ons x Relat ed Do cume ntatio n xii Obtain ing Docu mentati on xii Cisco. com xi i Document ation C D-ROM xi ii Orderi ng Documenta tion x iii Docu menta tion Fe edb ack x ...

  • Cisco Systems ATA 188 - page 4

    Cont ent s iv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Instal ling the Cis co ATA 2-1 Network Re quiremen ts 2-2 Safety Reco mmendation s 2-2 What the Ci sco ATA Packag e Includ es 2-2 What You Nee d 2-3 Instal lati on Pro cedu re 2-3 Power-Do wn Procedur e 2-6 Configur ing the Cisco ATA ...

  • Cisco Systems ATA 188 - page 5

    Content s v Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Parameter s and Defaults 5-1 Config uratio n Text Fi le Templa te 5-2 User Int erface ( UI) Parame ter 5-3 UIPasswo rd 5-3 Paramet ers for Con figu ration Method and Encr yption 5-4 UseTFTP 5-4 TftpU RL 5-4 Encryp tKey 5-5 Network Pa r ...

  • Cisco Systems ATA 188 - page 6

    Cont ent s vi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Tone P aramet er Synt ax 5-21 How to Calcul ate Sca ling Fac tors 5-22 Recommende d Values 5-22 Specif ic Cal l-Prog ress Tone Pa ramete r Info rmation 5-23 NPrint f 5-26 TraceF lags 5- 27 Medi aPo rt 5-27 Configur ing and Debu gging ...

  • Cisco Systems ATA 188 - page 7

    Content s vii Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Runn ing the Ex ecu table Fi le 7-4 Upgrade Requ irements 7-5 Syntax 7-5 Upgrade Proc edure 7-5 Confi rming a Su cces sful S ignal ing Image U pgra de 7-6 Using a We b Browser 7-6 Using th e Voice Configur atio n Menu 7-7 Troubles ho ...

  • Cisco Systems ATA 188 - page 8

    Cont ent s viii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Cisco ATA Style Conf eren ce Ca lling Proc edure A-7 Voice Menu Codes B-1 Cisco ATA Speci fication s C- 1 Phys ical S pecif icati ons C-1 Electr ica l Spec ificat ions f or Cis co AT A C-2 Envir onmenta l Specif icatio ns C-2 Immun ...

  • Cisco Systems ATA 188 - page 9

    ix Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapto r Administra tor’s Guide (SCC P) OL-3141-01 Preface Overview The Cisco AT A 186 and Cisco AT A 188 An alog T elephon e Adapt or Adm inistrator’ s Guid e (SCCP ) pro vides th e informati on you need to install , conf igur e and man age the Cisco A T A 186 and Cisco A T A 188 on a Skinny ...

  • Cisco Systems ATA 188 - page 10

    x Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Conv ent ions Conven tions This docu ment u ses t he fol lowing conventions : • Altern ativ e keywords are groupe d in braces and se parated by vertica l bars (fo r example, { x | y | z }). • Arguments fo r which you suppl y v alues ...

  • Cisco Systems ATA 188 - page 11

    xi Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Pre face Convent ions Ti p Means the follo wing information will help yo u solve a p r oblem . The tips informat ion migh t not be troublesh ooting or even an acti on, but co uld be use ful inf ormati on, si milar to a Timesav er . Cautio n Mea ...

  • Cisco Systems ATA 188 - page 12

    xii Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Related Documenta tion Related Documentation • Read Me F irst - AT A Boot Lo ad Infor mation • Cisco A T A 186 and Cisco 188 Ana log T e lephone Ada ptor At a Glance • Re gulato ry Complian ce and Safety In formati on for the Cis ...

  • Cisco Systems ATA 188 - page 13

    xiii Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Pre face Obtaining Documentation Internatio nal Cisco web sites can be accessed from this URL: http://www .cisco.co m/public/countr ies_languages. shtml Documenta tion CD-ROM Cisco documentati on and additio nal literature are a v ailable in ...

  • Cisco Systems ATA 188 - page 14

    xiv Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Obtain ing Technical Assista nce Obtaining Tech nical Ass istance Cisco pr ov ides Cisco .com, which inclu des the Cis co T echnic al Assistan ce Cente r (T A C) W ebsit e, as a sta rting point for all techni cal assis tanc e. Cus tome ...

  • Cisco Systems ATA 188 - page 15

    xv Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Pre face Obtaining Additional Publications and Information All custo mers, pa rtners , and resel lers who ha v e a va lid Cisc o service co ntra ct hav e com plete acces s to the technical support resources on the Cisco T A C website. Some serv ...

  • Cisco Systems ATA 188 - page 16

    xvi Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Preface Obtainin g Additi onal Publicat ions and Info rmation • Int ernet Pr otoc ol J our nal is a quarte rly journal pub lished by Cisco Systems for engineering professiona ls in volved in the design, development, and ope ration of public ...

  • Cisco Systems ATA 188 - page 17

    C HAPTER 1-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 1 Cisco Analog Telephone Adaptor Overview This secti on describe s the hardwar e and software features of the Cisco Analo g T eleph one Adap tor (Cisco A T A) and includes a brief ov ervie w of the Skinn y Client Control Protocol (SCCP ...

  • Cisco Systems ATA 188 - page 18

    1-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Overview of the Skinny Client Control P rotocol Figur e 1 -2 The Cisco A T A 186 a s an Endpoint in a n SCCP Netw or k Figur e 1 -3 The Cisco A T A 18 8 as an Endpoi nt in an SCCP Netw or k Ov ...

  • Cisco Systems ATA 188 - page 19

    1-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Hard ware Overv iew Figur e 1 -4 SCCP Archit ec tur e Hardware Overview Cisco A T As are co mpact, ea sy-to-in stall de vices. Figure 1-5 sh o ws the rear panel o f the Cisco A T A 18 6. Figur ...

  • Cisco Systems ATA 188 - page 20

    1-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Hardwa re Overview The unit provides t he fol lowing conne ctors and ind icators : • 5V po we r connec tor . • T wo RJ-11 FXS (Foreign Exchan ge Stati on) por ts—The C isco A T A supp or ...

  • Cisco Systems ATA 188 - page 21

    1-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features Note If the func tion button blinks sl o wly , the Cisco A T A cannot find the DH CP server . Check your Ether net conne ctions and m ake sure t he DH CP server i s av aila b ...

  • Cisco Systems ATA 188 - page 22

    1-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures When ope rating with a low-bit-rat e codec, the Cisco A T A ca n support either two G.7 23.1 conn ections o r one G. 729 conne ction. The s election of G.72 3.1 or G .729 mu ...

  • Cisco Systems ATA 188 - page 23

    1-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Software Features • Ring cade nce fo rmat • Silence su ppression • Lo w-bit-rate co dec selection • R T P media p ort co nfiguration • Hook-fl ash detec tion timin g configuration ? ...

  • Cisco Systems ATA 188 - page 24

    1-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Software F eatures Mid-call Services The method of initiat ing and using mid-call services for the SCCP protocol dif fers accor ding to mode. The fol lo wing three modes are a v ailable for in ...

  • Cisco Systems ATA 188 - page 25

    1-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Ada ptor Overvi ew Installati on and C onfigurat ion Overvie w Installation an d Configurati on Overview Ta b l e 1 - 3 provid es the basic steps required to insta ll and config ure the Cisco A T A to make it op ...

  • Cisco Systems ATA 188 - page 26

    1-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 1 Cisco Analog Telephone Adaptor Ove rview Installa tion and Con figuration O verview ...

  • Cisco Systems ATA 188 - page 27

    C HAPTER 2-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 2 Installing the Cisco ATA This secti on provides instruc tions for in stalling the Ci sco A T A 186 and Cisco A T A 188. Before you perform the installa tion, make sure you ha ve met the follo win g prerequisites: • Planne d the net ...

  • Cisco Systems ATA 188 - page 28

    2-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Netwo rk Requiremen ts Network Requi rements The Cisc o A T A acts as an end point on an IP te lephony network. The following equipm ent is requi red: • Cisco CallManag er versio n 3.0 or later • V oic e ...

  • Cisco Systems ATA 188 - page 29

    2-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA What Y ou Need • Re gulato ry Complian ce and Safety In formation for th e Cisco AT A 186 and Cisco AT A 1 88 • 5V po wer ad aptor • Po wer co rd Note The Cisco A T A is intended for us e only with th e ...

  • Cisco Systems ATA 188 - page 30

    2-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Installa tion Proced ure Figur e 2-1 Cisco A T A 18 6 Rear P a nel Connectio ns Figur e 2-2 Cisco A T A 18 8 Rear P anel Connections Proc edure Step 1 Place the Ci sco A T A near an electrical po wer outlet ...

  • Cisco Systems ATA 188 - page 31

    2-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Install atio n Procedu re If you ar e connec ting a t elephone set that was p reviously conne cted to a n active telephone line, unp lug the tel ephone line cord f rom the wall jack and plug i t into t he Pho ...

  • Cisco Systems ATA 188 - page 32

    2-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 2 Insta lling the Cisco ATA Power-D own Procedu re Power-Down Procedure Cautio n If you need t o power down Cisco A T A 186 or C isco 18 8 at any tim e, use the fol lowing power -down procedu re to prev ent d amage to the unit. Proc ed ...

  • Cisco Systems ATA 188 - page 33

    C HAPTER 3-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 3 Configuring the Cisco ATA for SCCP This se ction de scribes how to configure t he Cisco A T A to op erate w ith th e Skinny Cli ent Cont rol Protocol ( SCCP) signaling image and ho w the Cisco A T A obtains the latest signalin g imag ...

  • Cisco Systems ATA 188 - page 34

    3-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Defaul t Boot Load B ehavior • Cisco A T A W eb Co nfi gur ation Page, p age 3-2 1 —This section shows the Cisco A T A W eb configurati on page and c ontains a proc edure for how to configur ...

  • Cisco Systems ATA 188 - page 35

    3-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Specif ying a Pr econfig ured VLAN ID or Disabl ing VLAN IP Enc apsulat ion 4. The Ci sco A T A contacts t he Cisco CallManager TFTP serv er and do wnloads the app ropriate . xml or .cnf conf igurat ...

  • Cisco Systems ATA 188 - page 36

    3-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Specifyin g a Preconfig ured VLAN ID or Disabling VLAN IP Encapsu lation N/A indicates th at the v ariable is not applicab le to the fe ature an d the se tting of this vara ible d oes not a ff e ...

  • Cisco Systems ATA 188 - page 37

    3-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Specif ying a Pr econfig ured VLAN ID or Disabl ing VLAN IP Enc apsulat ion In hexade cimal format , this v alue is 0x0 0000052 . Step 2 Set bits 18-29 of the VLANSe tting parameter to to v oice VLA ...

  • Cisco Systems ATA 188 - page 38

    3-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Steps Nee ded to Configur e the Cisco ATA Steps Needed to Co nfigure the Cisc o ATA This section con tains the follo wing topics: • Basic Conf igur ation S teps in a Cis co CallM anager TFTP S ...

  • Cisco Systems ATA 188 - page 39

    3-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server Basic Config uration Steps in a Non-TFTP Se rver Enviro nment Ta b l e 3 - 4 shows th e basic steps for conf iguring the Cisco A T A without using th ...

  • Cisco Systems ATA 188 - page 40

    3-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver Setting Up the TFTP Server with Cisco ATA Software This section pro vides the proced ure for the Cisco A T A administrator to obtain the correct C ...

  • Cisco Systems ATA 188 - page 41

    3-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server Fax Se rvices Fe atures • Fax servic es mode select ion • Named Si gnalling E vent (NSE) pa yload typ e for fax pas s-through Fa x S er v i c es ...

  • Cisco Systems ATA 188 - page 42

    3-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver Parameters Not Used for SCCP The following para meters appear on the Cisco A T A W eb con f igura tion scr een but are us ed only for the MGCP im ...

  • Cisco Systems ATA 188 - page 43

    3-11 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server The synta x of the cfgfmt program follows: Syntax cfgfmt [-eR C4Passw ord] -t pTagFil e input-t ext- file outpu t-bina ry-fi le – -eRC4Pa sswor d ...

  • Cisco Systems ATA 188 - page 44

    3-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver Creating a Configuration File for a Specific Cisco ATA Once you ha ve booted up the Cisc o A T A, you may d ecide that you wan t to create a conf ...

  • Cisco Systems ATA 188 - page 45

    3-13 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server Step 3 Run the cfgfmt.e xe tool, which is b undled with the Cisco A T A software, on the ata< macaddre ss > .tx t text fi le to generat e the ...

  • Cisco Systems ATA 188 - page 46

    3-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver The fo llo wing command an d output show an example of this comm and. Comm and Exam ple atapname.exe 10.20.30.40.50.60 Comm and Outpu t ata0a141e ...

  • Cisco Systems ATA 188 - page 47

    3-15 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server • cfgfmt -eS ecret - tp TagFile input -text-fi le output-b inary- file If the Cisco A T A EncryptK ey parameter has the v alue of 0 or is not incl ...

  • Cisco Systems ATA 188 - page 48

    3-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Configur ing the Cisco ATA Using a TFTP Ser ver Note If no DH CP server is fou nd and t he Ci sco A T A is prog rammed to find o ne, th e fu nction butto n continue s to blink. Procedur e if DH ...

  • Cisco Systems ATA 188 - page 49

    3-17 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Configur ing the C isco ATA Using a TFT P Server Step 2 Use the default value of 1 for th e Cisco A T A para mete r DHCP . Step 3 Use the default value of 1 for th e Cisco A T A para meter Use Tftp ...

  • Cisco Systems ATA 188 - page 50

    3-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Voice Co nfiguration Menu • DNS1IP • DNS2IP • Domain This com pletes the pa rameter sett ings you nee d to conf igure in order f or the Cisco A T A to contact the TFTP serve r (without us ...

  • Cisco Systems ATA 188 - page 51

    3-19 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Voice C onfigu ration Me nu Note If you are using th e voice configura tion me nu to stati cally c onfigure the Cisco A T A I P address, you must disable DHCP by setting its value to 0. Step 4 Foll ...

  • Cisco Systems ATA 188 - page 52

    3-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Voice Co nfiguration Menu Entering Alpha numeric Value s Some v oice co nf igurati on menu options re quire you to enter alp hanumer ic charact ers. Alph anume ric entry differs from n umeric e ...

  • Cisco Systems ATA 188 - page 53

    3-21 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Cisco ATA Web Co nfigur ation Pa ge Cisco ATA Web Configuratio n Page Y ou can use the C isco A T A web configur ation pa ge in a non- TFTP configura tion environmen t, or in a TFTP con figuration ...

  • Cisco Systems ATA 188 - page 54

    3-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Cisco ATA We b Configuration Pa ge Figur e 3-1 Cisco A T A W eb Configu ratio n P age Y ou ca n access the we b configuration pa ge from any graphics- capable browser , such as Micros oft Inter ...

  • Cisco Systems ATA 188 - page 55

    3-23 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 3 Configu ring the Cisco ATA for SCCP Resetting the Cisco ATA Using Cisco CallManager Follow these ste ps to set paramete rs using the web c onfiguration page: Proc edure Step 1 Make sure that your PC and the Cisc o A T A are alr eady ...

  • Cisco Systems ATA 188 - page 56

    3-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 3 Configurin g the Ci sco ATA fo r SCCP Upgradi ng the SCCP Signaling I mage Step 6 Click the Reset Pho ne b utton on the Phone Configuration sc reen. T he Reset D e vice p op-up win do w appe ars. Step 7 Click Reset . Step 8 A confi ...

  • Cisco Systems ATA 188 - page 57

    C HAPTER 4-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 4 Adding the Cisco ATA to the Cisco CallManager Once you ha ve configured the Cisc o A T A, converted the configuratio n file into a binary file and stored the file on t he Cisc o CallM anag er TFTP server, you must regist er the C isc ...

  • Cisco Systems ATA 188 - page 58

    4-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapter 4 Adding th e Cisco ATA to the Cisc o CallMa nager Adding Cisco A TAs M anually Adding Cisco ATAs Manually Use the follo wing proced ure to a dd Cisco A T As manually us ing the Cisco CallManager Admin istration application . Ti p T o ...

  • Cisco Systems ATA 188 - page 59

    4-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 4 Add ing the Cisco ATA to the Cisco CallMan ager Using the Cisco Bulk Administration Tool (BAT) Step 11 Click the Insert b utton (called the Update b utto n in Ci sco Call Manager ve rsion 3 .2). A popup window asks y ou if you want t ...

  • Cisco Systems ATA 188 - page 60

    4-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapter 4 Adding th e Cisco ATA to the Cisc o CallMa nager Using Auto -Regis trati on • If you w ant to add a secon d Cisco A T A FXS port to Cisco CallM anager , you need to fabr icate a MA C address for the Pho ne 2 port by dr opping t he ...

  • Cisco Systems ATA 188 - page 61

    C HAPTER 5-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 5 Parameters and Defaults This se ction provides informat ion on the para meters and d efaults t hat you can use to cr eate yo ur own Cisco A T A configuration file. This section also inc ludes th e voice configu ration m enu co de for ...

  • Cisco Systems ATA 188 - page 62

    5-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Configur ation T ext File Templ ate Note This sec tion cont ains r ecomme nded v alue s for t he Unite d State s and Swe den as conf igur ation e xamp les for cert ain param eters. For infor mati on about o ...

  • Cisco Systems ATA 188 - page 63

    5-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Use r I nte rfa ce (UI) Pa ram ete r NPrintf:0 TraceFlags:0x00000000 SigTimer:0x00000064 CodecName:PCMU,PCMA,G723,G729 OpFlags:0x2 VLANSetting:0x0000002b User Interface (UI) Parameter This pa ramete r type c o ...

  • Cisco Systems ATA 188 - page 64

    5-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Parameters for Configurat ion Meth od and Encryp tion Parameters fo r Configu ration Method an d Encryption This section describes parameter s for instruct ing the Cisco A T A ho w to locate its TFTP serv e ...

  • Cisco Systems ATA 188 - page 65

    5-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Param eters fo r Configur ation Met hod and Encrypt ion Note From the voice configurati on menu , you ca n only enter t he IP add ress; from the w eb configura tion page , you can enter the actual URL. Valu e ...

  • Cisco Systems ATA 188 - page 66

    5-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Network Para meters Voice Configuration Menu Access Code 320 Related Parameters • UseTFTP , page 5-4 • TftpU RL, p age 5- 4 Network Parameters This secti on describe s the parame ters for ena bling or d ...

  • Cisco Systems ATA 188 - page 67

    5-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Network Param eters StaticIp Description Conf igure the Cisc o A T A IP a ddress using th is parameter if the DHCP parameter is set to 0. Valu e Type IP addre ss Default 0.0.0.0 Voice Configuration Menu Access ...

  • Cisco Systems ATA 188 - page 68

    5-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Account Information Param eters StaticNetMask Description Conf igure the statically assigne d subnet mask using this parameter if the DHCP parameter is set to 0. Valu e Type IP addre ss Default 255.2 55.255 ...

  • Cisco Systems ATA 188 - page 69

    5-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Ac cou nt In fo rma tio n Par am ete rs Range Maxi mum 51 char acter s for each pa rame ter Voice Configuration Menu Access Codes 46 and 47 for EP ID 0 o r S I D 0 an d EP I D1 o r S I D1 , re spectiv ely CA0o ...

  • Cisco Systems ATA 188 - page 70

    5-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s SCCP Mode Parame ter SCCP Mode Pa rameter This paramete r (UseMGCP) is locate d in the yello w portion of the Cisco A T A web conf iguratio n page. The other parameters in this portion of the screen are no ...

  • Cisco Systems ATA 188 - page 71

    5-11 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers • CallerIdM ethod, pa ge 5-1 4 • DNS1IP , page 5-15 • DNS2IP , page 5-16 • Domain, page 5-16 • NumTxFram es, page 5-17 • UDPT OS, page 5-17 • OpFlags, pa ge 5-17 • VLANS ...

  • Cisco Systems ATA 188 - page 72

    5-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Default 3 Voice Configuration Menu Access Code 300 Related Parameters ConnectM ode, page 5-13 ( bit 21) AudioMod e, p age 5-1 2 (bits 1 and 17) PrfCodec Description Not u sed fo r SCC ...

  • Cisco Systems ATA 188 - page 73

    5-13 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers ConnectM ode Description This pa ramet er is a 32 -bit bitm ap to co ntro l the conn ection m ode of t he select ed ca ll signall ing pro tocol. Ta b l e 5 - 2 provides bit definitions ...

  • Cisco Systems ATA 188 - page 74

    5-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters CallerIdMethod Description This 32 -bit parame ter spec ifies the s ignal fo rmat to use for b oth FXS ports for ge neratin g Calle r ID format. Possible va lues are : • Bits 0 -1 ( ...

  • Cisco Systems ATA 188 - page 75

    5-15 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers • Bits 3- 6—These bits are for th e Start dig it (v alid v al ues are 12 for “ A ,” 13 for “B,” 14 for “C,” a nd 15 fo r “D.”) . • Bits 7-10—Th ese bits are for ...

  • Cisco Systems ATA 188 - page 76

    5-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters DNS2IP Description This par ameter is for setting the secondary dom ain name se rver (DNS) IP , if the DHCP server doe s not provide one. I f DHCP provide s DNS2IP (if it is non-zer o ...

  • Cisco Systems ATA 188 - page 77

    5-17 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Opera ting Paramet ers Voice Configuration Menu Access Code 931 Related Parameters • TftpU RL, p age 5- 4 • CA0orCM 0 and CA1orC M1, page 5-9 NumTxFrames Description Not used for SCCP . For info rmation a ...

  • Cisco Systems ATA 188 - page 78

    5-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Operating Parame ters Default 0x2 Voice Configuration Menu Access Code 323 Related Parameters • TftpU RL, p age 5- 4 • DHCP , page 5-6 • VLANS etting, p age 5- 18 VLANSetting Description This paramet ...

  • Cisco Systems ATA 188 - page 79

    5-19 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Valu e Type Bitmap Default 0x0000002 b Voice Configuration Menu Access Code 324 Related Parameter OpFlags, pa ge 5-17 Optional Feature Pa rameters This se ction include s the par ...

  • Cisco Systems ATA 188 - page 80

    5-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers RingCaden ce Description Use this parameter to specify th e internal a nd ex ternal ri nger caden ce pattern, expressed as a tr iplet of inte gers “a,b , and c”. • a—Nu ...

  • Cisco Systems ATA 188 - page 81

    5-21 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers Call-Pro gress Ton e Paramete rs This secti on covers all the call -progress t ones that the Ci sco A T A suppor ts, and con tains the fol lowing topics: • List of Call-Prog re ...

  • Cisco Systems ATA 188 - page 82

    5-22 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers • total-t one-t ime controls th e length of time the tone is audibl e (0 to 0xf f f f). I f t hi s va l u e i s s et t o 0 , the tone will play until another call e vent stop ...

  • Cisco Systems ATA 188 - page 83

    5-23 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers • CallW a itT one = "1,3 0959,0,2 392,0, 0, 160 0, 4000,112 00" (appro ximately -1 0 dBm) • ConfirmT one = "1 ,30959,0 ,2392,0, 0, 480, 480,192 0" (ap pro ...

  • Cisco Systems ATA 188 - page 84

    5-24 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers BusyTone Description The Cis co A T A plays t he b usy to ne when the ca llee is b usy . Default values for the nine-integer array • ntone— 2 • freq0— 30467 • freq1? ...

  • Cisco Systems ATA 188 - page 85

    5-25 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers RingbackTone Description The Ci sco A T A play s the r ing-b ack tone when the callee is bein g aler ted b y the ca lled de vice. Default values for the nine-integer array • nt ...

  • Cisco Systems ATA 188 - page 86

    5-26 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers Confir mTone Description The Cisc o A T A plays the c onfirm tone to prom pt the user to enter a phone number whe n in v okin g a supplem entary se rvice, such as call-f orward ...

  • Cisco Systems ATA 188 - page 87

    5-27 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 5 Parameters an d Defaults Optiona l Feature Paramet ers TraceFlags Description This parameter is for diagnostic use. Bit v alues are as follo ws: • Bits 0 to 6—Reserved • Bit 7—SCCP message log (set to 0 f or a simplif ied log ...

  • Cisco Systems ATA 188 - page 88

    5-28 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 5 Parameters a nd Default s Optional Feature Paramet ers ...

  • Cisco Systems ATA 188 - page 89

    C HAPTER 6-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 6 Configuring and Debug ging Fax Services The Cisco A T A provides two modes of fax services t hat are ca pable of intern etworki ng with Cisco IOS ga te wa ys o v er I P netw or ks. T hese mode s are cal led fax p ass-thr ough mode an ...

  • Cisco Systems ATA 188 - page 90

    6-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note Th e Cisco A T A can a lso acce pt stand ard-ba sed prot ocol-level code c switch request s, but canno t send such re quests. Theref ore, to inter operate ...

  • Cisco Systems ATA 188 - page 91

    6-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de ConnectMode Description The Connec tMode param eter is a 3 2-bit v alue. The parameter se ttings app ly to both lines of the Cisco A T A. Configure Co nnectMod e a ...

  • Cisco Systems ATA 188 - page 92

    6-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Using F ax Pass -through Mode Note For detaile d informat ion on settin g up yo ur IOS gate ways and on fea ture a v ailability , ref er to th e documen t Cisco F ax Service s o ver I P . E ...

  • Cisco Systems ATA 188 - page 93

    6-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Using Fax Pass- through Mo de Dial-Peer Lev el Commands Y ou ca n enab le fax pass -thr ough mod e for c ommuni cation be tween a Cisco IOS gateway and the specif ied Cisco A T A using the foll ...

  • Cisco Systems ATA 188 - page 94

    6-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Usin g FAX Mode Using FAX Mode Use fax mode when the gate w ays in the network do not support fax pass-through mode or dial -pe er configurat ion. Y ou ca n set one or both li nes of the Ci ...

  • Cisco Systems ATA 188 - page 95

    6-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Configuring the Cisco IOS Gateway for Fax Mode On the C isco gateway , disable bo th fax re lay and fax pass-thr ough at t he dial-p eer level or s ...

  • Cisco Systems ATA 188 - page 96

    6-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Using prserv for Diagnos ing Fax Problems This section con tains the follo wing topics: • prse rv Ov ervi e w , page 6-8 • Analyzing prse ...

  • Cisco Systems ATA 188 - page 97

    6-9 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Proc edure Step 1 <IP addre ss>.<po rt> <IP add ress> is the IP add ress of your PC. <port> is any unused port (any number ...

  • Cisco Systems ATA 188 - page 98

    6-10 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Debugging FAX Pass-th rough Mode When the Ci sco A T A is conf ig ured to us e fa x pass-thr ough mode , t he fax call session can be establ ...

  • Cisco Systems ATA 188 - page 99

    6-11 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Originating-Gateway Example When the Cisc o A T A is used as an ori ginating gateway for a fax session , make sure that th e following condit ions ...

  • Cisco Systems ATA 188 - page 100

    6-12 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Using rtpcatc h for Diagnosin g Fax Problems This section con tains the follo wing topics: • rtpcatc h Overview , page 6-12 • Exam ple o ...

  • Cisco Systems ATA 188 - page 101

    6-13 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Stream f iles a re labeled with an integ er tag be ginnin g with 00. Stream f il es are also tagged with the ex te ns io n pcm for G .711A/G. 711? ...

  • Cisco Systems ATA 188 - page 102

    6-14 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices <03.pcm>: (G711u) 2.213:10000 => 2.116:10002 total 2179 pkts(2179 frames), lost 0 pkts, fill 1 silence pkts ---------- FAX Summary ...

  • Cisco Systems ATA 188 - page 103

    6-15 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services [ 25]<2.213=>2.11 6> Codec G723 [ 26]<2.116=>2.21 3> Codec G723 [ 101]<2.116=>2 .213> Cod ec G711u/D [ 102]<2 .116=& ...

  • Cisco Systems ATA 188 - page 104

    6-16 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Analyzing rtpcatch Ou tput for Fax Sessions The fol lo wing ex amples sho w the prope r fax e v ents when gate wa ys are conf igu red to ope ...

  • Cisco Systems ATA 188 - page 105

    6-17 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services • NSE signa ling packet s are sent from <3.200>. • <2.53> switches to G. 711µ-law using a dyna mic paylo ad type . Example 6-4 T3 ...

  • Cisco Systems ATA 188 - page 106

    6-18 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices Example 6 -7 F ax Mode F ailur e ---------- FAX Summary 1 ---------- [ 37]<2.53=>3.200> Codec G711 [ 39]<3.200=>2.53> Code ...

  • Cisco Systems ATA 188 - page 107

    6-19 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) Ol-3141-01 Chapter 6 Configuring an d Debuggi ng Fax Services Debugging the Cisco ATA 186/188 Fa x Services Possible Cause for Failure • Cisco fax r elay opti on is n ot disab led on the gateway . Example 6 -1 0 F ax P ass-through Mo de F ail ur e ---- ...

  • Cisco Systems ATA 188 - page 108

    6-20 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) Ol-3141-01 Chapt er 6 Config uring a nd Debuggi ng Fax Ser vices Debuggi ng the Cisco A TA 186/188 Fax Se rvices ...

  • Cisco Systems ATA 188 - page 109

    C HAPTER 7-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 7 Upgrading the Cisc o ATA Signaling Image Thi s sect ion d escri bes t wo me thod s for u pgrad ing t he Cisc o A T A soft war e for t he SCCP prot ocol : • Upgradi ng the Signaling Image V ia Ci sco Cal lManager , page 7-2 —This ...

  • Cisco Systems ATA 188 - page 110

    7-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Via Ci sco CallMana ger Upgrading th e Signaling Imag e Via Cisc o CallManager This fe ature i s support ed in C isco Ca llManage r version 3.2 or later and ...

  • Cisco Systems ATA 188 - page 111

    7-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Upgrading the Signaling Image Via Cisco CallManager Procedure fo r Upgrading One Cisco AT A Step 1 Do wnload the latest Cisco A T A release softwar e for SCCP from the Cisco web site, and store ...

  • Cisco Systems ATA 188 - page 112

    7-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Upgradi ng the Signali ng Image Man ually Upgrading th e Signaling Imag e Manually This section descri bes how to manua lly upgrade the Cisco A T A with the most recent signal ing image. T ...

  • Cisco Systems ATA 188 - page 113

    7-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Upgradi ng the Sign alin g Image Manu ally Upgrad e Requ irement s The follo wing list contains th e requireme nts for using the a ta186us.e xe f ile a nd the v oice conf igurat ion menu to upg ...

  • Cisco Systems ATA 188 - page 114

    7-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Confirming a Su ccessful Sig naling Image U pgrade Step 3 Using th e telepho ne keypad, ente r the foll owing: 100# ip_ad dress_of_P C * port # This is th e IP address of th e PC and the p ...

  • Cisco Systems ATA 188 - page 115

    7-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 7 Upg rading the Cisco ATA Signaling Image Conf irmi ng a Su cces sful Sig nalin g Im age Upg rade Using the Voice Configuration Menu T o us e the v oice conf igur ation men u to v eri fy a succ essful image u pgrad e, perf orm the f ol ...

  • Cisco Systems ATA 188 - page 116

    7-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapte r 7 Upgradi ng the Ci sco ATA Sign aling I mage Confirming a Su ccessful Sig naling Image U pgrade ...

  • Cisco Systems ATA 188 - page 117

    C HAPTER 8-1 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 8 Troubleshooting This se ction de scribes troubleshoot ing pr ocedures f or the Cisco A T A : • General Troubleshoot ing T ips, page 8-1 • Symptoms and Actions , page 8-2 • Install ation and Upgr ade Issues, page 8-3 • Resta r ...

  • Cisco Systems ATA 188 - page 118

    8-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Symptoms and Actions Symptoms an d Actions Sympto m Pa rameters with va lues set by using the web ser ver int erface o r voic e conf iguration me nu re vert to their original settings. Possible Cause Y ou are using ...

  • Cisco Systems ATA 188 - page 119

    8-3 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 8 Troubleshoot ing Installat ion and Up grade Is sues Sympto m Cannot pl ace ca ll. Possible Cause Equi pment f ail ure on t he netw ork . Recommended Ac tion Replace defec ti v e netwo rk equi pment. Possible Cause Recipi ent has not r ...

  • Cisco Systems ATA 188 - page 120

    8-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Restarting the Cisco CallMan ager Sympto m V oic e prompt returns Up grade faile d message. This ca n only occur i f you are usin g the ex ecuta ble-f ile u pgrade met hod. Possible Cause Y ou have entered a n incor ...

  • Cisco Systems ATA 188 - page 121

    8-5 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 8 Troubleshoot ing Debuggi ng Debugging The MS-DOS Windows-based debuggi ng progr am to ol, p reser v .exe, i s incl ude d in every s oftware upgrade package. T he tool is also available from Ci sco T A C. The prserv pr ogram is used i ...

  • Cisco Systems ATA 188 - page 122

    8-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Frequent ly Asked Q uestions Frequently Asked Questio ns Q. How can I recover the box if I forgot the pa ssword? A. There ar e two im portant pa ssw ords. On e is the UIP assw ord, which pr otects a ccess to the C i ...

  • Cisco Systems ATA 188 - page 123

    8-7 Cisco ATA 186 and C isco ATA 188 Analog Telephone Ad aptor Admini strator’s Guide (SCCP) OL-3141-01 Chapter 8 Troubleshoot ing Frequent ly Asked Questi ons Q. Can I change th e R T P frame siz e of voi ce codecs fo r the Cisco A T A when usin g with SCCP image ? A. Y es. The R TP frame size is contro lled b y the Cisco CallManager whe n the C ...

  • Cisco Systems ATA 188 - page 124

    8-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Chapter 8 Trouble shoot ing Cont act ing TA C Contac ting TAC Qualif ied custom ers who need to cont act the Cisco T echnical Ass istance Center ( T A C) must p rovid e the follo wing informatio n: • Product c odes. • Software versio n num ...

  • Cisco Systems ATA 188 - page 125

    A- 1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX A How to Use Pre-call a nd Mid-call Services This sectio n cont ains end-u ser pr ocedur es fo r pr e-call s ervice s and mid-call se rvices th at t he Cis co A T A supports fo r the SCCP protoco l. Note Th e Cisco A T A admin istrat ...

  • Cisco Systems ATA 188 - page 126

    A- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Pre- call Services Activate Call-Forward-All Use t his feat ure to send a ll call s from o ne te lephone number t o anothe r tele phone n umber . T o activ ate Call -F ...

  • Cisco Systems ATA 188 - page 127

    A-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix A How to Use Pre-ca ll and Mid -call Service s Procedu res for Usi ng Pre-cal l Services Call P ickup T o ans wer a phone in your call p ickup g roup, fo llow these steps: Proc edure Step 1 Pic k up the ha ndse t, pr ess ** then 3 on ...

  • Cisco Systems ATA 188 - page 128

    A- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Mi d-call Servi ces Procedures for Using Mid -call Servic es The method of initiat ing and using mid-call services during a call when using SCCP diff ers accordi ng to ...

  • Cisco Systems ATA 188 - page 129

    A-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix A How to Use Pre-ca ll and Mid -call Service s Procedu res for Usin g Mid-ca ll Servi ces Cisco VG 248 Style There following t hree p rocedures are unique t o Cisco VG248 sty le: • Cisco VG24 8 Style Three-w ay Calling Procedur e, ...

  • Cisco Systems ATA 188 - page 130

    A- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Mi d-call Servi ces Cisco VG248 Conference Call Procedure Step 1 Perform a hookf lash t o place the cur rent c all on hold an d obtai n a se cond di al tone . Step 2 En ...

  • Cisco Systems ATA 188 - page 131

    A-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix A How to Use Pre-ca ll and Mid -call Service s Procedu res for Usin g Mid-ca ll Servi ces Cisco ATA Style Conference Calling Procedu re Step 1 While e ngaged in a call, perfor m a hoo kflash, t hen pre ss 3 o n your tel ephone keypad ...

  • Cisco Systems ATA 188 - page 132

    A- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix A How to Use Pre-call and Mid-call Services Procedures for Using Mi d-call Servi ces ...

  • Cisco Systems ATA 188 - page 133

    B-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX B Voice Menu Codes This sec tion con tains a quick -refer ence li st of th e voice co nfiguration me nu opti ons for t he Cisco A T A. For informa tion on the u se of the voice menu, see “ Chapte r 3, “ Configuring the Cisco A T A ...

  • Cisco Systems ATA 188 - page 134

    B-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x B Voice Menu Code s Ta b l e B - 2 lists configura tion codes. For additiona l inform ation ab out these parame ters, see “ Ch apter 5, “P aramete rs and Def aults.” T able B-2 Cisco A T A V oice Me nu Codes—Confi gur ation P ...

  • Cisco Systems ATA 188 - page 135

    B-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix B Voice Menu Codes Ta b l e B - 3 lists codes use d in t he softwa re upgra de pro cess. For i nformat ion abou t thes e code s, see “ Appe ndix , “U pgrading the C isco A T A Signaling I mage.” T able B-3 Cisco A T A V oice Me ...

  • Cisco Systems ATA 188 - page 136

    B-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x B Voice Menu Code s ...

  • Cisco Systems ATA 188 - page 137

    C-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX C Cisco ATA Specifications This section desc ribes the Cisc o A T A specifications: • Physical Sp ecifications, page C -1 • Electric al Specif icatio ns, page C-2 • En vi ronmental Spec ific ations, pa ge C-2 • Immunit y Speci ...

  • Cisco Systems ATA 188 - page 138

    C-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x C Cisco ATA Sp ecif ication s Electrical Specification s for Cisco ATA Electrical Specificat ions for Cis co ATA Environme ntal Specificati ons Immunity Specifications EN50082 -1, incl uding th e following: • EN61000- 3-2, Electr o ...

  • Cisco Systems ATA 188 - page 139

    C-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix C Cisco ATA Specificatio ns Physical Interfaces Physical Interfaces Ringing Chara cteristics Software Specifications T able C-4 Ph ys ical Int erf ac es Description Specification Ethern et T wo RJ-45, IEE E 802.3 10BASE-T standar d A ...

  • Cisco Systems ATA 188 - page 140

    C-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x C Cisco ATA Sp ecif ication s Softw ar e Spe cific ation s Fax G.711 fax pass-t hrough and G.711 fax mode. Enhanc ed fax p ass-thro ugh is su pporte d on th e Cisco A T A. Success of fax transm issions up to 14.4 kbps depe nds on net ...

  • Cisco Systems ATA 188 - page 141

    C-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Append ix C Cisco ATA Specificatio ns Sof tware Sp ecifi cations V oice features • V oice ac ti vity det ection (V AD) • Comfort noise ge nerati on (CNG) • Dynamic jitte r buf fer (adapti v e) V oice-over-IP (V oIP) protocol s • H.323 ...

  • Cisco Systems ATA 188 - page 142

    C-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x C Cisco ATA Sp ecif ication s Softw ar e Spe cific ation s ...

  • Cisco Systems ATA 188 - page 143

    D- 1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX D SCCP Call Flows This section describes basic call flows for the Cisc o A T A: • Supported SCCP Me ssage Set, page D-1 • Call Flo w Scenarios for Successful Calls, page D-3 Note Th e term Cisco A T A is use d througho ut this ma ...

  • Cisco Systems ATA 188 - page 144

    D- 2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Supported SCCP Messa ge Set – StationCapabilitie sRes – StationS erve rReq – StationAlar m • Call Control Messages – StationK ey PadButton – StationEnbloc Call – StationStimulus – StationOf fHook ? ...

  • Cisco Systems ATA 188 - page 145

    D-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Appendix D SCCP Call Flows Call Fl ow Scena rios for Success ful Calls Call Flow Scena rios for Successful Calls This sectio n describes call flo ws for the fo llo wing scenarios: • Cisco A T A-to- Cisco CallManager , page D-3 • Cisco A T ...

  • Cisco Systems ATA 188 - page 146

    D- 4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Call Flow Scena rios for Succes sful Calls T able D-1 A ction Descr iptions fo r First Call Flow Step Action Description Step 1 StationRegister—Cisc o A T A to Cisco CallManager Cisco A T A sends a messag e to an ...

  • Cisco Systems ATA 188 - page 147

    D-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Appendix D SCCP Call Flows Call Fl ow Scena rios for Success ful Calls Cisco ATA-to-Cis co CallMan ager-to-Cisc o ATA Figure D-2 illustrates the call flo w betwee n Cisco A T A 1 and Cisco A T A 2 through a Cisco CallMa nager . The call flow i ...

  • Cisco Systems ATA 188 - page 148

    D- 6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Call Flow Scena rios for Succes sful Calls Step 3 Sta tion Start T one (Ins ide Dial T one )—Cisco CallManager to Cisco A T A 1 Cisc o CallManag er command s Cisco A T A 1 to play a spec ifie d tone. I f the Cisc ...

  • Cisco Systems ATA 188 - page 149

    D-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 Appendix D SCCP Call Flows Call Fl ow Scena rios for Success ful Calls Step 18 Station Open Rece i ve Channel—Cisc o CallM anager to Cisco A T A 1 Cisc o CallM anager a llo ws Cisc o A T A 1 t o be gin r ecei ving a unicast R TP stream. Step ...

  • Cisco Systems ATA 188 - page 150

    D- 8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendix D S CCP Call Flows Call Flow Scena rios for Succes sful Calls ...

  • Cisco Systems ATA 188 - page 151

    E-1 Cisco ATA 186 and Cisco ATA 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 APPEND IX E Performing a Cross-Protocol Upgrade This sect ion describe s how to perform an upgrade f rom the SCCP signaling image to either th e MGCP , SIP or H.323 signa ling images. Y o u can c onfi gure the Cisco A T A to autom atically do w ...

  • Cisco Systems ATA 188 - page 152

    E-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 Appendi x E Perfo rming a Cr oss-Prot ocol Upgrade Exam ple The upg radeco de paramet er value could be : upgrade code :3,0x30 1,0x0 400,0x 0200,19 2.168 .2.170, 69,0x02 0723 a,ata18 6-v2- 15-020 723a.zu p This i nstructs the Ci sco A T A to u ...

  • Cisco Systems ATA 188 - page 153

    GL-1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adapto r Administra tor’s Guide (SCC P) OL-3141-01 GLOSSAR Y Numerics 10BASE-T 10-Mbps baseban d Ethern et spe cification usi ng two pair s of tw isted-pa ir cabl ing ( Categories 3, 4, o r 5): one pair for transmitt ing data and th e other for re ceiving data. 10BASE-T , whic h is part of the ...

  • Cisco Systems ATA 188 - page 154

    Glos sary GL-2 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 compr ession Th e ru nning of a data se t throug h an a lgorithm that r educes t he space required to store or th e bandwi dth requir ed to transmit the data set. Compare w ith comp anding and expan sion. CoS Class of serv ice. An i ...

  • Cisco Systems ATA 188 - page 155

    Glossary GL-3 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 FXO Foreign Ex change Of fice. An FXO int erface conne cts to the pub lic switche d telephon e network (PSTN) centr al of f ice and is the interf ace of fered on a stan dard telephone. Cisco FXO interfac e is an RJ-11 conn ector th a ...

  • Cisco Systems ATA 188 - page 156

    Glos sary GL-4 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 IP Intern et Protocol . Network layer pr otocol in the T CP/IP stack o ffering a con nectionle ss intern etwork service. IP p rovides fe atures for addressi ng, ty pe-of-serv ice sp ecification , frag mentati on and reassem bly , an ...

  • Cisco Systems ATA 188 - page 157

    Glossary GL-5 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 P POTS Plain old telepho ne service . Basic telephon e service sup plying stan dard single-li ne telephon es, telephone lines, and a ccess to the PST N. Proxy S erver An inter media ry program that act s as both a server and a cli en ...

  • Cisco Systems ATA 188 - page 158

    Glos sary GL-6 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 SIP Session Initia tion Protocol. Protocol dev eloped b y the IETF MMUSIC W orking Group as an alterna tiv e to H.32 3. SIP fea tures ar e compli ant with IETF RFC 254 3, publis hed in Ma rch 1999 . SIP equips pla tforms to signal t ...

  • Cisco Systems ATA 188 - page 159

    Glossary GL-7 Cisco ATA 186 and Cisc o ATA 188 Analog Tele phone Adaptor Adm inistrator ’s Guide (SCCP) OL-3141-01 voice pa cket gateway Gateway platfor ms that enable Intern et tele phony service provider s to offer res idential and b usiness-c lass services for Internet telephony . VoIP V oice o ver IP . The c apabilit y to carry normal telepho ...

  • Cisco Systems ATA 188 - page 160

    Glos sary GL-8 Cisco ATA 186 and Cisco ATA 188 Analog Tel ephone Adap tor Administr ator’s Guide (S CCP) OL-3141-01 ...

  • Cisco Systems ATA 188 - page 161

    IN-1 Cisco ATA 186 and Cisco 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 INDEX Numerics 802.1P Class of Se rvice ( Cos) Bit configu ration 3-9 802.1Q VLAN ID 3-4 A acces s voicem ail A-1 activat e call-f orward-all A-2 adding a seco nd FXS port 4-3 adding Cisco AT As to Cisco Cal lManag er usin g auto registra tion 4-4 ...

  • Cisco Systems ATA 188 - page 162

    Index IN-2 Cisco ATA 186 an d Cisco 188 Analog Telephone Adaptor Admini strator’s Guid e (SCCP) OL-3141-01 using T FTP and D HCP ser vers 3-7 Web-based 3-21 Wed-based 3-23 mid-call services style 5-14 NSE payl oad type 5-14 obtaini ng file from T FTP serve r 3-15 overvi ew 1-9 parame ters AudioMod e 5-12, 6-2, 6-6 CallerIdMethod 5-14 ConnectM ode ...

  • Cisco Systems ATA 188 - page 163

    Inde x IN-3 Cisco ATA 186 and Cisco 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 E electric al specifications C-2 ena bling and di sab ling p orts 5-8 ena bling user- spe cified voice VLAN ID 3-4 encr yption 3-14, 5-5 encry ption exam ples 3-14 encr yption key 5-5 Encr yptKey 3-14, 5-5 Encr yptKey p aramete r 5-5, 8-6 e ...

  • Cisco Systems ATA 188 - page 164

    Index IN-4 Cisco ATA 186 an d Cisco 188 Analog Telephone Adaptor Admini strator’s Guid e (SCCP) OL-3141-01 manuall y upgrading signa ling image 7-4 maximu m number of digit s in phone num ber 5-15 maximu m on-hook tim e 5-20 MediaP ort parame ter 5-27 MeetMe co nferen ce A-3 mid-ca ll serv ice fo rmat 3-9 mid-call ser vices ATA style A-6 Bellcore ...

  • Cisco Systems ATA 188 - page 165

    Inde x IN-5 Cisco ATA 186 and Cisco 188 Analog Tele phone Adapto r Administrator ’s Guide (SCCP) OL-3141-01 S safety recomme ndations 2-2 scaling f actor calc ulation 5-22 SCCP arch itect ure 1-3 overvi ew 1-2 version 1-5 SCCP/MGCP pr otocol sel ection 3-9 SCCP mode enabled 5-10 seconda ry Cisc o CallM anager confi guration 5-9 seco ndary domai n ...

  • Cisco Systems ATA 188 - page 166

    Index IN-6 Cisco ATA 186 an d Cisco 188 Analog Telephone Adaptor Admini strator’s Guid e (SCCP) OL-3141-01 using ex ecut able file 7-4 upgradi ng the sign aling image 3-24 User Inter face (UI) Pa ramet ers 5-3 user i nterfac e pa ssword 3-9 UseTFTP parameter 5-4 using atapn ame.e xe tool for non- dotted he xadecima l value 3-12 V VG248 Style 5-14 ...

Manufacturer Cisco Systems Category Telephone Accessories

Documents that we receive from a manufacturer of a Cisco Systems ATA 188 can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- ATA 188 manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems ATA 188
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems ATA 188.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems ATA 188, service manual, brief instructions and user manuals Cisco Systems ATA 188. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems ATA 188.

Similar manuals

A complete manual for the device Cisco Systems ATA 188, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems ATA 188 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems ATA 188.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems ATA 188 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems ATA 188, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems ATA 188, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems ATA 188 - which should help us in our first steps of using Cisco Systems ATA 188
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems ATA 188
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems ATA 188 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems ATA 188?

Use the form below

If you did not solve your problem by using a manual Cisco Systems ATA 188, ask a question using the form below. If a user had a similar problem with Cisco Systems ATA 188 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)