English dropdown-ico

Manual Siemens 6ED1050-1AA00-0BE8

372 pages 25.43 mb
Download

Go to site of 372

Summary
  • Siemens 6ED1050-1AA00-0BE8 - page 1

     LOGO! _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ __________________ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ _________________ _ _ ______ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 2

    Legal information Legal information Warning notice system This manual contains notices y ou have to ob serve in order to en sur e your personal safety, as well as to prevent damage to property. The notices r eferring to your perso nal safe ty are highlighted in the manual by a sa fety alert symbol, notices referring only to property damage have no ...

  • Siemens 6ED1050-1AA00-0BE8 - page 3

    LOGO! Manual, 04/2011, A5E03556174-01 3 Preface We thank you for purchasing LOGO! and congratulate you on your decision. With LOGO! you have acquired a logic modul e that meets the stringent quality requirem ents of ISO 9001. LOGO! can be used in many fields of applications. Due to its hi gh functionality and easy operation, LOGO! offers you the ut ...

  • Siemens 6ED1050-1AA00-0BE8 - page 4

    Preface LOGO! 4 Manual, 04/2011, A5E03556174-01 Note Some chapters/sections in this manual specifically relate to th e LOGO! 0BA7 devices. For easy identification, the names o f these chapters /sections end w ith "(0BA7 only)". Valid range of this manual The manual applies to devices of se ries 0BA6 and 0BA7. New features of the LOGO! 0BA ...

  • Siemens 6ED1050-1AA00-0BE8 - page 5

    Preface LOGO! Manual, 04/2011, A5E03556174-01 5 ● Support of configuration of element s connected to UDFs (User-De fined Functions) LOGO!Soft Comfort V7.0 provides a new circuit program editor - the UDF editor. Circuit programs created in the UDF edi tor can be saved as indivi dual U DF blocks for use in an existing or a new circuit progr am in L ...

  • Siemens 6ED1050-1AA00-0BE8 - page 6

    Preface LOGO! 6 Manual, 04/2011, A5E03556174-01 ● Additional optional analog inputs and fast digital inputs are a vailable on some of t he LOGO! 0BA6 Base Modules. ● LOGO! 0BA6 configuration menus c an be displayed in one of ten s upported languages. You have a configuration choice to specify the language for LOG O! menus. ● New instruction b ...

  • Siemens 6ED1050-1AA00-0BE8 - page 7

    Preface LOGO! Manual, 04/2011, A5E03556174-01 7 Additional support Additional support is availabl e on the Siemens websit e: Siemens LOGO! website ( http://www.siemens.co m/logo ) ...

  • Siemens 6ED1050-1AA00-0BE8 - page 8

    Preface LOGO! 8 Manual, 04/2011, A5E03556174-01 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 9

    LOGO! Manual, 04/2011, A5E03556174-01 9 Table of contents Preface ....................................................... ............................................................... ................................ 3 1 Getting start ed with LOGO! ................................... ............................................................... ...

  • Siemens 6ED1050-1AA00-0BE8 - page 10

    Table of contents LOGO! 10 Manual, 04/2011, A5E03556174-01 3.7.6 Switching LOGO! to RUN mode .............................. ............................................................... .... 97 3.7.7 Second circuit program ................................... ............................................................... ........... 100 3.7.8 Del ...

  • Siemens 6ED1050-1AA00-0BE8 - page 11

    Table of contents LOGO! Manual, 04/2011, A5E03556174-01 11 4.4.13 Astronomical clock (0BA7 only) .......................... ............................................................... ........ 195 4.4.14 Stopwatch (0BA7 only) ................................... ............................................................... ............ 198 4.4 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 12

    Table of contents LOGO! 12 Manual, 04/2011, A5E03556174-01 10 Applic ations ................................................ ............................................................... ............................ 317 A Technica l data ............................................... .............................................................. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 13

    LOGO! Manual, 04/2011, A5E03556174-01 13 Getting started with LOGO! 1 Here's LOGO! LOGO! is a universal logic modul e made by Siemens that integrat es: ● Controls ● Operator and display pa nel with backgro und lighting ● Power supply ● Interface for expansion modules ● Interface for cards or cables, acco rding to the device series: ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 14

    Getting started with LOGO! LOGO! 14 Manual, 04/2011, A5E03556174-01 Which devices are available? LOGO! Base Modules are available in two voltage cl asses: ● Class 1 ≤ 24 V, i.e. 12 V DC, 24 V DC, 24 V AC ● Class 2 > 24 V, i.e. 115...240 V AC/DC LOGO! Base Modules are available in two versions: ● LOGO! Basic (version with display): 8 inpu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 15

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 15 Features of the LOGO! TD The LOGO! TD is available beginni ng with the 0BA6 series. It pr ovides an additional display that is wider than the LOGO! B asic . It has four function keys t hat you can program in your circuit program as inputs. Like the LOGO! Basic, it has four cu rsor ...

  • Siemens 6ED1050-1AA00-0BE8 - page 16

    Getting started with LOGO! LOGO! 16 Manual, 04/2011, A5E03556174-01 Note The LOGO! Base Module may onl y be equipped with expan sion modul es of the same voltage class. Mechanical encodi ng pins in the hou sing prevent you from connecting de vices of a different voltage class. Exception: The interface on t he left side of an analog module o r commu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 17

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 17 The LOGO! structure      /2*2 %$ /2*2 5&(      /2*2 %$ /2*2 5& (     / 0 ,  ,  ,  ,  ,  ,  , , ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 18

    Getting started with LOGO! LOGO! 18 Manual, 04/2011, A5E03556174-01      / 1 , ,  ,  , ,  ,  ,  ,       4 4  4 4     / 0 ,  ,  ,  ,  ,  ,  , ,       4 4  4 4  /2*2 % $ ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 19

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 19 / 1 , ,  ,  ,      4 4 4 4   5816723      / 1 , ,  ,  , ,  ,  ,  ,         4 4 4 4        4 4 4 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 20

    Getting started with LOGO! LOGO! 20 Manual, 04/2011, A5E03556174-01 / 0 ,  ,  ,  ,       4 4 4 4   5816723         / 0 ,  ,  ,  ,  ,  ,  ,  ,         4 4 4 4      ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 21

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 21 LOGO! AM2 AQ (0 ... 10 V DC or 0/4 ... 20 mA ) / 0 / 0   5816723    3( 9 0 , , 0 9 28738 7[9RU P $           ① Power supply ② Outpu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 22

    Getting started with LOGO! LOGO! 22 Manual, 04/2011, A5E03556174-01 LOGO! TD   / 2*27' s ཰ ཱ ) )  )  )  (6& 2.      ① Communication interface ② Power supply The LOGO! TD includes a wider display area than the LOGO! onb oa rd display. It inc ludes four programmable cursor keys , ...

  • Siemens 6ED1050-1AA00-0BE8 - page 23

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 23 Symbols Version with display unit is eq uipped with 8 inputs, 4 outputs and 1 Ether net interface Version with display unit is eq uipped with 8 inputs and 4 outpu ts Version without display unit i s equipped with 8 inputs and 4 ou tputs The digital module is equip ped with 4 digita ...

  • Siemens 6ED1050-1AA00-0BE8 - page 24

    Getting started with LOGO! LOGO! 24 Manual, 04/2011, A5E03556174-01 Versions The following LOGO! ver sions are available: Symbol Designation Supply voltage Inputs Outputs Properties LOGO! 12/24RCE 12/24V DC 8 digital 1) 4 relays (10 A) (0BA7) LOGO! 230RCE 115 ... 240 V AC/DC 8 digital 4 relays (10A) LOGO! 12/24RC 12/24 V DC 8 digital 1) 4 relays (1 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 25

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 25 Expansion modules The following expansion m odules can be connected to LOGO!: Symbol Name Power suppl y Inputs Outputs LOGO! DM8 12/24R 12/24 V DC 4 digital 4 relays (5A) LOGO! DM8 24 24 V DC 4 digita l 4 solid state 24V / 0.3A LOGO! DM8 24R 3) 24 V AC/DC 4 digital 4 relays (5A) LO ...

  • Siemens 6ED1050-1AA00-0BE8 - page 26

    Getting started with LOGO! LOGO! 26 Manual, 04/2011, A5E03556174-01 Communication modules The following communication modules can be connected to LOGO!: Symbol Name Power suppl y Inputs Outpu ts LOGO! CM AS Interface 30 V DC the next four inputs after the physical inputs of LOGO! (ln ... ln+3) the next four outputs after the physical outputs of LOG ...

  • Siemens 6ED1050-1AA00-0BE8 - page 27

    Getting started with LOGO! LOGO! Manual, 04/2011, A5E03556174-01 27 Certification and approvals LOGO! is certified to cULus and FM. ● cULus Ha z. Loc. Underwriters Laborato ries Inc. (UL) to - UL 508 (Industrial Contro l Equipment) - CSA C22.2 No. 142 (Proce ss Control Equipment) - UL 1604 (Hazardous Location) - CSA-213 (Hazardous Location) APPRO ...

  • Siemens 6ED1050-1AA00-0BE8 - page 28

    Getting started with LOGO! LOGO! 28 Manual, 04/2011, A5E03556174-01 ID for Korea Our products carrying the label shown at the side are compliant with Korean standards. WARNING Risk of death, personal injury or property damage can occur if you do not follow safety precautions for hazardo us locations. In potentially explosive atm ospheres, do not di ...

  • Siemens 6ED1050-1AA00-0BE8 - page 29

    LOGO! Manual, 04/2011, A5E03556174-01 29 LOGO! installation and wiring 2 General guidelines Please note the following guidelines for installin g and wiring your LOGO!: ● Always ensure that the wiring of your LO GO! is compliant with c urrent rules and standards. Also, conform with all national and regional regul at ions when you install and opera ...

  • Siemens 6ED1050-1AA00-0BE8 - page 30

    LOGO! installation and wiri ng LOGO! 30 Manual, 04/2011, A5E03556174-01 What you must note when installing LOGO! is designed for fixed and enclosed install ation in the housing or the control cabinet. WARNING Attempts to install or wire LOGO! or relat ed equipment with pow er applied could cause electric shock or faulty ope ration of the equipment. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 31

    LOGO! installation and wiri ng LOGO! Manual, 04/2011, A5E03556174-01 31 Carrying out tests You must ensure safety in your plant. Before finally commissioning a sys tem, carry out complete functional testing as well as all the necessary safety testing. Also, test for any predictable f aults that can occur. This mean s that you will avoid any danger ...

  • Siemens 6ED1050-1AA00-0BE8 - page 32

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! 32 Manual, 04/2011, A5E03556174-01 2.1 Modular LOGO! setup 2.1.1 Maximum LOGO! network setup (0BA7 only) Maximum LOGO! 0BA7 network setup LOGO! 0BA7 supports SIMATIC S7 communi cation via 10/100 Mbit/s TCP/IP Ethernet. A LOGO! 0BA7 device can support a maximum of 8+1 network conne ctions ...

  • Siemens 6ED1050-1AA00-0BE8 - page 33

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! Manual, 04/2011, A5E03556174-01 33 A typical LOGO! 0BA7 network set up is shown below: /2*2 % $ /2*2 %$ /2* 2 %$ /2*2  %$ 6,0$ 7,& +0, 6,0$ 7,& 6 6,0$ 7,& 6 6,0$ 7,& 6    /2*2 6R I W &am ...

  • Siemens 6ED1050-1AA00-0BE8 - page 34

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! 34 Manual, 04/2011, A5E03556174-01 2.1.2 Maximum setup with expansi on and communication modules LOGO! supports a maximum of 24 digital inputs, 8 analog input s, 16 digital outputs, and 2 analog outputs (Page 13). You can a chieve the maximum setup in different ways as sho wn below: Maxim ...

  • Siemens 6ED1050-1AA00-0BE8 - page 35

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! Manual, 04/2011, A5E03556174-01 35 High-speed/optimal communication performance For optimal and high-speed comm unication perfo rmance between th e LOGO! Base Module and the various modules, we reco mme nd that you install the digi tal modules first, then the analog modules (examples abov ...

  • Siemens 6ED1050-1AA00-0BE8 - page 36

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! 36 Manual, 04/2011, A5E03556174-01 2.1.3 Setup with different voltage classes Rules Digital modules can only be dir ectly connected to devices of th e same voltage class. You can connect anal og and comm unication modules t o devices of any voltage class. You can replace two similar DM 8 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 37

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! Manual, 04/2011, A5E03556174-01 37 Overview: Connecting an additional expansion module to an expan sion module Expansion modul e Additional expa nsion modules DM8 12/24R, DM16 24R DM8 24, DM16 24 DM8 24R DM8 230R, DM16 230R AM2, AM2 PT100, AM2 RTD, AM2 AQ CM DM8 12/24R, DM16 24R x x x - x ...

  • Siemens 6ED1050-1AA00-0BE8 - page 38

    LOGO! installation and wiri ng 2.1 Modular LOGO! setup LOGO! 38 Manual, 04/2011, A5E03556174-01 2.1.4 Compatibility The LOGO! TD module can only b e used with equipment series 0 BA6 or 0BA7. The ES7 version of the LOGO! TD provides new me nu commands for network communication and e rror diagnostics that spe cifically relate to the LOGO! 0BA7 device ...

  • Siemens 6ED1050-1AA00-0BE8 - page 39

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! Manual, 04/2011, A5E03556174-01 39 2.2 Installing/removing LOGO! Dimensions The LOGO! installation dimension s are compliant with DIN 43880. LOGO! can be snap-mounted to 35 mm DIN rails to EN 500 22 or on the wall. LOGO! width: ● LOGO! TD has a width of 128.2 mm , which correspond ...

  • Siemens 6ED1050-1AA00-0BE8 - page 40

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! 40 Manual, 04/2011, A5E03556174-01 2.2.1 DIN rail mounting Mounting How to mount a LOGO! Base Module and a digital module onto a DIN rail: 1. Hook the LOGO! Base Module onto the rail. 2. Push down the lower end to sna p it on. The mounting interlock a t the rear must engage. / 2*2? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 41

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! Manual, 04/2011, A5E03556174-01 41 5. Slide the digital module toward s the left until it contacts the LOGO! Base Module. 6. Using a screwdriver , push the interlock to the left. In its end position the slide interlock engages in the LOGO! Base Module. / 2*2%$ / 2*2? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 42

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! 42 Manual, 04/2011, A5E03556174-01 Removal To remove LOGO!: ....... if you have ins talled only one LOGO! Base Module : 1. Insert a screwdr iver into the eyelet at the bottom of the slide interlock and move the latch downward. 2. Swing the LOGO! Base Mo dule off the DIN rail.  $ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 43

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! Manual, 04/2011, A5E03556174-01 43 Repeat steps 1 to 4 for all other expansi on modules. Note If you have connected more than one expansion module, it is advisable to start removal with the last module at the right-hand side. Make sure the slide interlock of the mo dule to be instal ...

  • Siemens 6ED1050-1AA00-0BE8 - page 44

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! 44 Manual, 04/2011, A5E03556174-01 Drilling template for wall-mounting Before you can wall-mount LOGO !, you need to drill holes using the template shown below: ཰ ཱི ཱཱ ི          ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 45

    LOGO! installation and wiri ng 2.2 Installing/removing LOGO! LOGO! Manual, 04/2011, A5E03556174-01 45 2.2.3 Mounting the LOGO! TD To prepare the mounting surface for the optional LOGO! TD and m ount it, follow these steps: 1. Cut a 119.5 mm x 78.5 mm (toleranc e: +0.5 mm) hol e in the mount ing surface. XX ` U RW U ^_ U RWU 2. Place the inc ...

  • Siemens 6ED1050-1AA00-0BE8 - page 46

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 46 Manual, 04/2011, A5E03556174-01 2.3 Wiring LOGO! Wire LOGO! using a screwdriver with a 3-mm blade. You do not need wire ferrules for the terminals. You can use co nductor s with cro ss-sections of up to the following thicknesses: ● 1 x 2.5 mm 2 ● 2 x 1.5 mm 2 for each second terminal cham ...

  • Siemens 6ED1050-1AA00-0BE8 - page 47

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 47 Connecting LOGO! To connect LOGO! to the power supply: / 01 / 0 / , , , , , , , , , / 1 /2*2ZLW K'&S RZHUVXSS O /2*2ZLW K$&SRZHUVXS SO 3URWHFWLRQZLW ...

  • Siemens 6ED1050-1AA00-0BE8 - page 48

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 48 Manual, 04/2011, A5E03556174-01 2.3.2 Connecting the LOGO! TD power supply The LOGO! TD must be conne cted to an external power su pply that supplies a voltage of 12 V DC or 24 V AC/DC. A power con nector is included with the LOGO ! TD. ཰ཱ           ...

  • Siemens 6ED1050-1AA00-0BE8 - page 49

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 49 2.3.3 Connecting LOGO! inputs Requirements At the inputs you connect senso r elements such as: momentary pu shbuttons, switches, light barriers, daylight control switches et c. Sensor characteristics for LOGO! LOGO! 12/24RCE LOGO! 12/24RC LOGO! 12/24RCo LOGO! 2 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 50

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 50 Manual, 04/2011, A5E03556174-01 Sensor connections Connecting glow lamps an d 2-wire proximity switches (Bero) to L OGO! 230RCE/230RC/230RCo or LOGO! DM8 230R (AC) and LOGO! DM16 230R (AC) The figure below shows how yo u co nnect a switch with a glow lam p to LOGO! The current that flows thro ...

  • Siemens 6ED1050-1AA00-0BE8 - page 51

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 51 Special features of LOGO! 12/24RCE/RC/RCo, LOGO! 24/24o and L OG O! 24C/24Co Fast digital input s: I3, I4, I5 and I6: These versions are also equipped with fast digital inputs (up/d own counters, threshold triggers). The restrictions ment ioned earlier do not a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 52

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 52 Manual, 04/2011, A5E03556174-01 Sensor connections To connect sensors to LOGO! : LOGO! 12/24.... and LOGO! 24... 0 / , , , , , ,  / 0 The inputs of these devi ces are not isolated and therefore require a common refere nce potential (chassis ground). With LOGO! 12/24 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 53

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 53 LOGO! A M2 8 , 0 8 , 0 5816723 / 0 / / 0 0 0 3( / 0 / 0 ཱ ཰ ི 9 9ROWDJHPHDVXUHPHQW &XUUHQWPHDVXUHPHQW 5HIHUHQFH &XUUHQW &XUUHQW    P$ 6HQVRU 3( 3(W ...

  • Siemens 6ED1050-1AA00-0BE8 - page 54

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 54 Manual, 04/2011, A5E03556174-01 LOGO! AM2 PT100 You can connect a maximum of two 2-wire or 3-wire PT100 sensors or one 2-wi re plus one 3-wire PT100 sensor to the modul e. Note that the sensor type su pported by the module is only PT100 with the default temperature coefficient of α= 0.003 85 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 55

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 55 LOGO! AM 2 RTD You can connect a maximum of tw o PT100 sensors or two PT1000 or one PT100 plus one PT1000 sensor in a 2-wire or 3-wi re connection or in a mixed us e of 2-wire and 3-wire connection to the module. Note that the sensor type supported b y the modu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 56

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 56 Manual, 04/2011, A5E03556174-01 2.3.4 Connecting outputs LOGO! ...R... The LOGO! ...R... version is equipped with relay outputs. The potential of the r elay contacts is isolated from the power supply a nd the inputs. Requirements for relay outputs You can connect various loads to the outputs; ...

  • Siemens 6ED1050-1AA00-0BE8 - page 57

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 57 Connecting This is how you co nnect the load to a LOGO! with solid-state ou tputs: 4 0 4  0 4 0 4 0 '0  /RD G9'& $PD [  /RDG /RDG LOGO! AM 2 AQ V1, V2: 0 ... 10 V DC R1: >= 5 kΩ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 58

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 58 Manual, 04/2011, A5E03556174-01 2.3.5 Connecting the EIB bus The connection is carried out via the two-pole screw terminal ( + and -). 581 6723 %86 (,% 3UR Jൻ   Only the red-black core pair is used, the white-yellow core pai r is not connected. Press the button "Prog ↓ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 59

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 59 2.3.6 Connecting the AS interface bus To set the address of the modul e on the AS interface bus, you n eed an addressing unit. Valid addresses are in the range of 1 to 31. Use each address o nce only . You can set the address on the AS interface bus before or a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 60

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 60 Manual, 04/2011, A5E03556174-01 Logic Assignments LOGO! system AS Interface system Inputs Output data bits I n D Q 1 I n+1 D Q 2 I n+2 D Q 3 I n+3 DQ4 Outputs Input data bits Q n D I 1 Q n+1 D I 2 Q n+2 D I 3 Q n+3 DI4 "n" depends on the plug-in positi on of the expansion module rel ...

  • Siemens 6ED1050-1AA00-0BE8 - page 61

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! Manual, 04/2011, A5E03556174-01 61 2.3.7 Connecting modem s (0BA6 only) The LOGO! 0BA6 device series su pports a modem conne ction betwee n a PC and LOGO! 0BA6 Base Module. You can use modems to download and upload cir cuit progra ms between LOGO!Soft Comfort and LOGO! devices. Configuration of ...

  • Siemens 6ED1050-1AA00-0BE8 - page 62

    LOGO! installation and wiri ng 2.3 Wiring LOGO! LOGO! 62 Manual, 04/2011, A5E03556174-01 2.3.8 Connecting the Ethernet i nterface (0BA7 only) LOGO! ...E The LOGO! ... E version is equipped wit h a 10/100 Mbit/s Ethernet RJ45 interfac e. Requirements for the network cable You can connect a standard Et hernet cable to the Ethernet inter face. To mini ...

  • Siemens 6ED1050-1AA00-0BE8 - page 63

    LOGO! installation and wiri ng 2.4 Putting into operation LOGO! Manual, 04/2011, A5E03556174-01 63 2.4 Putting into operation 2.4.1 Switching the LOGO!/Power On LOGO! does not have a power switch. The reaction of LOGO! du ring startup depends on the following: ● Whether a circuit program is stored in L OGO! ● Whether a card is in serted (The ca ...

  • Siemens 6ED1050-1AA00-0BE8 - page 64

    LOGO! installation and wiri ng 2.4 Putting into operation LOGO! 64 Manual, 04/2011, A5E03556174-01 The following illustration shows all possible reactions of LOGO !:     0R  0R &QW  3DU  % ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 65

    LOGO! installation and wiri ng 2.4 Putting into operation LOGO! Manual, 04/2011, A5E03556174-01 65 You can also memorize four sim ple rules for starting LOGO! : 1. If neither LOGO! nor the inserted card contains a circuit progr am, the LOGO! Basic displays the following: 3UHVV(6& 1R3URJUDP 2. A circuit program on the card i s automaticall ...

  • Siemens 6ED1050-1AA00-0BE8 - page 66

    LOGO! installation and wiri ng 2.4 Putting into operation LOGO! 66 Manual, 04/2011, A5E03556174-01 2.4.2 Putting a CM EIB/KNX into operation 1. Bus voltage and supply volt age must be present. 2. Connect the PC to the serial EIB interface. 3. Start software ETS, using ETS2 version 1.2. 4. Configure the application program in ET S2, V 1.2. 5. The ap ...

  • Siemens 6ED1050-1AA00-0BE8 - page 67

    LOGO! installation and wiri ng 2.4 Putting into operation LOGO! Manual, 04/2011, A5E03556174-01 67 2.4.3 Operating states LOGO! Base Module operating states LOGO! Base Modules (LOGO! Basic o r LOGO! Pure) have two operati ng states: STOP and RUN. STOP RUN • The display shows: 'No Program' (not LOGO!...o) • Switching LOGO! to programmi ...

  • Siemens 6ED1050-1AA00-0BE8 - page 68

    LOGO! installation and wiri ng 2.4 Putting into operation LOGO! 68 Manual, 04/2011, A5E03556174-01 CM AS Interface, communication states The CM AS Interface has three co mmunication states: The LED is lit green, red or flashes red/yellow. LED AS-I is lit Green Red Red/Yellow AS Interface communication OK AS Interface communic ation failed Slave has ...

  • Siemens 6ED1050-1AA00-0BE8 - page 69

    LOGO! Manual, 04/2011, A5E03556174-01 69 Programming LOGO! 3 Getting started with LOGO! Programming refers to creating a circuit program fro m the LOGO! Base Module. In this chapter you w ill learn how to use LOGO! to create the LOGO! circuit programs for your application. LOGO!Soft Comfort is the LOGO! programming software that you ca n use on you ...

  • Siemens 6ED1050-1AA00-0BE8 - page 70

    Programming LOGO! 3.1 Connectors LOGO! 70 Manual, 04/2011, A5E03556174-01 3.1 Connectors LOGO! is equipped with inputs and outputs Example of a configuration with several modules: /  0 $, $, , , , , $, $,      4 4  4 4  / 0 ,  ,   ,   ,       ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 71

    Programming LOGO! 3.1 Connectors LOGO! Manual, 04/2011, A5E03556174-01 71 Note LOGO! can recognize, read and swit ch the I/O of all expansion m odules regardless of their type. The I/O are presented in t he ins tallation order of the mo dules. Dependent upon specific LOGO! dev ice series, the following I/O and flag blocks are available for creating ...

  • Siemens 6ED1050-1AA00-0BE8 - page 72

    Programming LOGO! 3.1 Connectors LOGO! 72 Manual, 04/2011, A5E03556174-01 LOGO! has the following connectors : Connectors /2 * 2  % $ /2*2 % $ '0 $0 $0$4 LOGO! 230RCE LOGO! 230RC/RCo LOGO! 24RC/RCo Two groups: I1 to I4 and I5 to I8 I9 to I24 AI1 to AI8 Inputs LOGO! 12/24RCE LOGO! 12/24RC/RCo LOGO! 24/24o LOGO! 24C/24Co ...

  • Siemens 6ED1050-1AA00-0BE8 - page 73

    Programming LOGO! 3.2 EIB inputs/outputs LOGO! Manual, 04/2011, A5E03556174-01 73 3.2 EIB inputs/outputs The application program "20 CO LOGO! 900E02" controls the commu nication between the LOGO! and the EIB/KNX bus via the communication module CM EIB/K NX. By configuring the applicat ion pr ogram in ETS (EIB Tool Softwar e), the division ...

  • Siemens 6ED1050-1AA00-0BE8 - page 74

    Programming LOGO! 3.3 Blocks and block numbers LOGO! 74 Manual, 04/2011, A5E03556174-01 3.3 Blocks and block numbers This chapter shows yo u how to use LOGO! elements to create com p lex circuits and how blocks and I/O are interconnected. In the topic " From circuit diagram to LOGO! Program (Page 76)" you will learn how to transform a con ...

  • Siemens 6ED1050-1AA00-0BE8 - page 75

    Programming LOGO! 3.3 Blocks and block numbers LOGO! Manual, 04/2011, A5E03556174-01 75 Block representation on the LOGO! onboard display The figure below shows a typi cal view of the LOGO! onboard disp lay. As you can s ee, it can show only one block at a time. W e have therefore introduced blo ck numbers to help yo u check the circuit struc ture. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 76

    Programming LOGO! 3.4 From circuit diagram to LOGO! program LOGO! 76 Manual, 04/2011, A5E03556174-01 Note An organizational program chart can be a valuable aid when you create the circuit program because you can enter in this char t all the block numbers that LOGO! assigns. By using the LOGO!Soft Comfort software to program LOGO!, you c an directly ...

  • Siemens 6ED1050-1AA00-0BE8 - page 77

    Programming LOGO! 3.4 From circuit diagram to LOGO! program LOGO! Manual, 04/2011, A5E03556174-01 77 Note Although you have four i nputs available for logic opera tions (Page 142), most of the views will only show three inputs for reason s of clarity. You program this fourth input and assign parameters just like you do with the other three inputs. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 78

    Programming LOGO! 3.4 From circuit diagram to LOGO! program LOGO! 78 Manual, 04/2011, A5E03556174-01 Wiring example The following figure shows you the wiring, base d on a 230 V AC version of LOGO!. / 1 6 6 6 4   / 1 / 1 , , , , ,QSX WZLU LQ J 2XW SXWZ LU LQJ /RDG ...

  • Siemens 6ED1050-1AA00-0BE8 - page 79

    Programming LOGO! 3.5 The four golden rules for operatin g LOGO! LOGO! Manual, 04/2011, A5E03556174-01 79 3.5 The four golden rules for operating LOGO! Rule 1: Changing the operating mode ● You create the circuit program in programming mode. After power is on, and when the display shows "No Program / Press ESC", press the ESC key to sel ...

  • Siemens 6ED1050-1AA00-0BE8 - page 80

    Programming LOGO! 3.5 The four golden rules for operatin g LOGO! LOGO! 80 Manual, 04/2011, A5E03556174-01 Rule 3: Cursor and cursor movement The following applies when you edit a circuit program: ● You can move the cursor whe n i t appears in the form of an under score: – Press , , or to move the cursor in the circuit program. – Press OK to c ...

  • Siemens 6ED1050-1AA00-0BE8 - page 81

    Programming LOGO! 3.6 Overview of LOGO! menus LOGO! Manual, 04/2011, A5E03556174-01 81 3.6 Overview of LOGO! menus LOGO! 0BA6 menus The following illustration show s an overview of LOGO! 0BA6 menu s: 2. 2. 2. (6& (6& (6& / 2*2 3URJUDPPLQJPRGH 3URJUDPPLQJPHQX 0DLQPHQX 7UDQVIHUPHQX 6HWXSPHQX 3DUDPHWHUDVVLJQPHQWP ...

  • Siemens 6ED1050-1AA00-0BE8 - page 82

    Programming LOGO! 3.6 Overview of LOGO! menus LOGO! 82 Manual, 04/2011, A5E03556174-01 LOGO! 0BA7 menus The following illustration show s an overview of LOGO! 0BA7 menu s: ႣႭ ႣႭ 2. 2. 2. (6& (6& (6& 2. (6& / 2*2 3URJUDPPLQJPRGH 3URJUDPPLQJPHQX 0DLQPHQX 7UDQVIHUPHQX 6HWXSPHQX 3DUDPHWHUDVVLJQPHQW? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 83

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 83 3.7 Writing and starting the circuit program The example below shows how to cr eate a prog ram for your circui t design in LOGO!. 3.7.1 Selecting programming mode You have connected LOGO! to the power supply and switched it on . The display now s ...

  • Siemens 6ED1050-1AA00-0BE8 - page 84

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 84 Manual, 04/2011, A5E03556174-01 The LOGO!'s programming menu is as shown below:  0VJ&RQILJ 3DVVZRUG &OHDU3UJ !(GLW Here you can also move the ">" cu rsor by pressing and . Move the ">" cursor to " ② &qu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 85

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 85 3.7.2 The first circuit program Let us now take a look at the fo llowing parallel circuit consi s ting of two switches. Circuit diagram The corresponding circuit diagram: 6 6 . ( . 7KHORDGLVVZLWFKHGRQZLWK 62 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 86

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 86 Manual, 04/2011, A5E03556174-01 3.7.3 Circuit program input Let us now write the circuit prog ram, starting at the output an d working towards the input. LOGO! initially shows the output:  4   7KHI LU VW/2* 2RX WSXW You will se ...

  • Siemens 6ED1050-1AA00-0BE8 - page 87

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 87 Press OK to confirm your entries and exit the dialog.  4 Bุ % 4 % ุ <RXUFRPSOHWHFLUFXLWSURJUDP? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 88

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 88 Manual, 04/2011, A5E03556174-01  4 ,ุ % Press OK . I1 is now connected to the input of the OR block. The cursor jumps to the next input of the OR bloc ...

  • Siemens 6ED1050-1AA00-0BE8 - page 89

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 89 Note You can invert individual inputs of the basic and special funct ions; that is, if an input carries a logical "1" signal, the circuit program will output a logical "0". On the other hand, a logical "0" is inverte ...

  • Siemens 6ED1050-1AA00-0BE8 - page 90

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 90 Manual, 04/2011, A5E03556174-01 3.7.4 Assigning a circuit program name You can assign your ci rcuit progr am a name that con sists of up to 16 uppercase/lowercase letters, numbers and special charac ters. When LOGO! is in the view below, follow these steps:  0VJ&RQ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 91

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 91 Your circuit progr am is now named " ABC ", and you are returned to the programming menu. To change the name of your circuit progr am, proceed in the sa me way. Note You can change the name of the circuit program only in programm ing mo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 92

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 92 Manual, 04/2011, A5E03556174-01 Assigning a program password from the LOGO! Basic A password can have a maximum length of 10 characters, and cons ists only of upperca se letters. On the LOGO! Basic, you can assign, edit or deactivate the password only from the "Password&qu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 93

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 93 Note You can cancel the input of a new password with ESC . In this case, the LOGO! Basic returns to the programming menu without savin g the password. You can also set your password using LOGO!Soft Comfort. You can not edit a password- protected ...

  • Siemens 6ED1050-1AA00-0BE8 - page 94

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 94 Manual, 04/2011, A5E03556174-01 Deactivating the password from the LOGO! Basic To deactivate the password to a llow, for ex ample, another user to edit your circuit program, you must know your curren t password (in our exampl e " ZZ "), the same as if you were changin ...

  • Siemens 6ED1050-1AA00-0BE8 - page 95

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 95 Changing LOGO! from RUN to STOP mode from the LOGO! TD A change from RUN mode to STOP mode from the LOGO! TD require s password entry if one is assigned. You must know t he existing password if one is assigned. If there is no password assigned on ...

  • Siemens 6ED1050-1AA00-0BE8 - page 96

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 96 Manual, 04/2011, A5E03556174-01 The main menu of the LOGO! TD (version ES7): ႣႭ !1HWZRUN 'LDJQRVWLF !&DUG 6HWXS 0VJ&RQILJ 6WDUW LOGO! changes to STOP mode. Note Whenever the LOGO! TD is shut down, the password is ...

  • Siemens 6ED1050-1AA00-0BE8 - page 97

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 97 3.7.6 Switching LOGO! to RUN mode In the main menu, select RUN to start LOGO!.  !6WDUW 6HWXS &DUG 3URJUDP 1. Return to the main menu: Press ESC 2. Move the '>' cursor to " ① ": Press o ...

  • Siemens 6ED1050-1AA00-0BE8 - page 98

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 98 Manual, 04/2011, A5E03556174-01   $4    0   $, (6&&a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 99

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 99 Status indication on the display   4    , / 6 6 ,  ,? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 100

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 100 Manual, 04/2011, A5E03556174-01 3.7.7 Second circuit program Up to this point, you have success fully created your firs t circ uit and assigned it a name and, if desired, a program password . In this sec tion we will show yo u how to modify existing circuit programs and how to ...

  • Siemens 6ED1050-1AA00-0BE8 - page 101

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 101 Adding a block to a circuit program Press to move the cursor to the B in B 1 (B1 is the number of the OR block):  %4   Insert the new block at this position. Confirm with OK .  ൻ%14   /2*2? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 102

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 102 Manual, 04/2011, A5E03556174-01 In our example we do not use t he reset input of the off-delay f unction, and we identify it with an 'x' connector. 4 3DU [ % % 7KLVLVZKDWWKHGLVSOD VKRXOGQRZVKRZ Assigning block parameters Now you set th ...

  • Siemens 6ED1050-1AA00-0BE8 - page 103

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 103 Showing/hiding parameters - the parameter protection mode If you want to show/hide the param eter and allow/prevent its mo dification in parameter assignment mode: 1. Move the cursor to the prot ection mode: Press or 2. Select the protection mod ...

  • Siemens 6ED1050-1AA00-0BE8 - page 104

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 104 Manual, 04/2011, A5E03556174-01 Verification of the circuit program This program branch for Q1 is no w co mpleted. LOGO! shows you th e output Q1. You can once again view the circuit prog ram on the display. Use the key s to browse the circuit program; that is, press or to mov ...

  • Siemens 6ED1050-1AA00-0BE8 - page 105

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 105 3.7.8 Deleting a block Let us assume you want to delete the block B2 from your c ircuit program and connect B1 directly to Q1. , , [ [ 4 ุ 3DU % % Proceed as follows: 1. Switch LOGO! to programming mode (as a reminder, refer ...

  • Siemens 6ED1050-1AA00-0BE8 - page 106

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 106 Manual, 04/2011, A5E03556174-01 3.7.9 Deleting block groups Assuming you intend to delete the blocks B1 and B2 from the following circuit program (corresponds with the circuit program in the " Second circuit p rogram (Page 100)" topic), proceed as follows: , , ...

  • Siemens 6ED1050-1AA00-0BE8 - page 107

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 107 3.7.10 Correcting programming errors Programming errors can be corrected easily in LOGO!: ● Provided editing mode is not ye t closed, you can re vert by one step by pressing ESC . ● If you have already configured all inputs, simply reconfigu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 108

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 108 Manual, 04/2011, A5E03556174-01 6. Select " ② ": Press OK LOGO! shows the following display:   /DVW $4LQ6WRS /DVW !'HILQHG The first two rows show your choices. The bottom row shows the c urrent setting for the analog output channels. The def ...

  • Siemens 6ED1050-1AA00-0BE8 - page 109

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 109 3.7.12 Defining the type of analog outputs Analog outputs can be either 0.. 10V/0..20mA, which is the defau lt, or 4..20mA . To define the type of analog out puts, follow these steps starti ng from the programming menu:  0VJ&RQILJ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 110

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 110 Manual, 04/2011, A5E03556174-01 3.7.13 Deleting the circuit p rogram and password To delete a circuit program and the password if one is defined: 1. Switch the LOGO! to pr ogramming mode (main menu). LOGO! opens t he main menu: LOGO! 0BA6 main menu:  6WDUW 6HWXS ...

  • Siemens 6ED1050-1AA00-0BE8 - page 111

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 111 5. Press OK . == 7RSUHYHQWXQLQWHQWLRQDOGHOHWLRQRI RXU FLUFXLWSURJUDP RXDUHSURPSWHGWRHQWHU RXUSDVVZRUGSURYLGHG RXKDYH DVVLJQHGRQH 3DVVZRUG" 6. Enter your passwor ...

  • Siemens 6ED1050-1AA00-0BE8 - page 112

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 112 Manual, 04/2011, A5E03556174-01 6. Move the '>' cursor to " ④ ": Press or  6 QF !6:7LPH 6HW&ORFN 7. Confirm " ④ ": Press OK LOGO! shows the following display: 2II 6:7LPH 2II !2Q The current setti ...

  • Siemens 6ED1050-1AA00-0BE8 - page 113

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 113 Enabling summertime/wintertime conversion To enable the summertime/ winter time conversion and set paramet ers, follow these steps: 1. Move the '>' cursor to 'On': Press or 2. Confirm 'On': Press OK The display s ...

  • Siemens 6ED1050-1AA00-0BE8 - page 114

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 114 Manual, 04/2011, A5E03556174-01 Note You can specify a time zone di fference Δ between 0 and 180 minu tes. The US2 selection is only supported in L OGO! devices as of the series 0BA6. Let us assume you want to enable European summertime/wintertime conve rsion: 1. Move the &ap ...

  • Siemens 6ED1050-1AA00-0BE8 - page 115

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 115 The display shows: 00''   ˂ PLQ  0 D U F K  1 R Y H P E H U 7LPHGL I IHU HQF HRIPLQ ● Confirm all your entrie ...

  • Siemens 6ED1050-1AA00-0BE8 - page 116

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! 116 Manual, 04/2011, A5E03556174-01 3.7.15 Synchronization Time synchronization between LO GO! and a conne cted communi catio n module EIB/KNX (version 0AA1 upward s!) c an be enabled/disabled ● in parameter assignment mode by m eans of the set menu ("Clock" menu item) ...

  • Siemens 6ED1050-1AA00-0BE8 - page 117

    Programming LOGO! 3.7 Writing and starting the circuit program LOGO! Manual, 04/2011, A5E03556174-01 117 LOGO! shows the following display:   2II 6 QF 2II !2Q The current setting of the automat ic synchronization function i s displ a yed on the bottom row. The default setting is " ④ "; that is, disabled. To enable/disab ...

  • Siemens 6ED1050-1AA00-0BE8 - page 118

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! 118 Manual, 04/2011, A5E03556174-01 3.8 Configuring additional functions for LOGO! (0BA7 only) If you are a LOGO! 0BA7 user, then after you have successfully created the second circuit program, you can configure additional functio ns, including the new functions for ...

  • Siemens 6ED1050-1AA00-0BE8 - page 119

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 119 3.8.1 Configuring network settings A LOGO! 0BA7 device can establish network comm unication with ot her LOGO! 0BA7 devices, SIMATIC S7 PL Cs, a SIMATIC HMI, or a PC with LOGO!Soft Comfort V7.0 (For more detailed information, refer ...

  • Siemens 6ED1050-1AA00-0BE8 - page 120

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! 120 Manual, 04/2011, A5E03556174-01 8. Press or to step into the next screen form for subnet mask setti ng. The default subnet mask is as sho wn below. To change the setting, press OK . When the cursor appears in a solid square, press or to move the cursor to a posit ...

  • Siemens 6ED1050-1AA00-0BE8 - page 121

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 121 3.8.3 Configuring the Data Log You can configure the Data Log block only from LOGO!Soft Comfor t. You can configure a maxim um of one Data Log for your circuit pr ogram using LOGO!Soft Comfort. The Data Log is used to r ec ord proc ...

  • Siemens 6ED1050-1AA00-0BE8 - page 122

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! 122 Manual, 04/2011, A5E03556174-01 Viewing network connectors in LOGO! Consider a circuit pro gram where a network digital input NI1 co nnects to the function block B5. B5 is connected to Q4. To vi ew this network input , proceed as follows: 1. Switch LOGO! to progr ...

  • Siemens 6ED1050-1AA00-0BE8 - page 123

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 123 3.8.5 Changing LOGO! to normal/slave mode LOGO! 0BA7 provides a menu comma nd for network communicati on se ttings. The section Configuring network settings (Pa ge 119) showed you how to con figure the network IP address, subnet ma ...

  • Siemens 6ED1050-1AA00-0BE8 - page 124

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! 124 Manual, 04/2011, A5E03556174-01 4. Confirm " ② ": Press OK LOGO! requires a password ent ry if one is assigned. If there is no password assigned on the LOGO!, LOGO! directly disp lays the view in Step 5. 3DVVZRUG 5. Move the cursor to ③ ": Pres ...

  • Siemens 6ED1050-1AA00-0BE8 - page 125

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 125 Changing LOGO! from slave mode to normal mode LOGO! is now in the following view:   6ODYH 3DVVZRUG !1RUPDO 1. Move the cursor to " ① ": Press or 2. Confirm " ① ": Press OK  !1R <HV & ...

  • Siemens 6ED1050-1AA00-0BE8 - page 126

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! 126 Manual, 04/2011, A5E03556174-01 Changing the password from the LOGO! After you enter the password assi gned, LOGO! shows the followin g display:   6ODYH !3DVVZRUG 1RUPDO 1. Move the cursor to " ① ": Press or 2. Confirm " ① &qu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 127

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 127 Deactivating the password from the LOGO! To deactivate the pas sword when LOGO! is in the following view, follow these steps:   6ODYH !3DVVZRUG 1RUPDO 1. Move the cursor to " ① ": Press or 2. Confirm & ...

  • Siemens 6ED1050-1AA00-0BE8 - page 128

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! 128 Manual, 04/2011, A5E03556174-01 3.8.6 Diagnosing errors from LOGO! LOGO! 0BA7 supports error diagn ostics. From LOGO!, you can view basic errors including SD card read/write errors, network communication e rrors, and so forth. You can clear individual error messa ...

  • Siemens 6ED1050-1AA00-0BE8 - page 129

    Programming LOGO! 3.8 Configuring additional functions for LOGO! (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 129 Clearing error information LOGO! 0BA7 can provide the following erro r messages: ● SD card read/w rite error ● SD card is write-protected ● EM (expansion module) bus error ● Network error To clear a specific er ror or all e ...

  • Siemens 6ED1050-1AA00-0BE8 - page 130

    Programming LOGO! 3.9 Memory space and circuit prog ram size LOGO! 130 Manual, 04/2011, A5E03556174-01 3.9 Memory space and circuit program size The size of a circuit program i n LOGO! is limited by the memory space (memory used by the blocks). Memory areas ● Program memory : LOGO! allows only a limited number of blocks in your circuit pr og ram. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 131

    Programming LOGO! 3.9 Memory space and circuit program si ze LOGO! Manual, 04/2011, A5E03556174-01 131 Memory requirements (0BA6) The table below shows an ove rvi ew of the memory requirements fo r the basic and special function blocks in LOGO! 0BA6: Function Program memory Rem memory* Basic functions AND 12 - AND with edge evaluation 12 - NAND (no ...

  • Siemens 6ED1050-1AA00-0BE8 - page 132

    Programming LOGO! 3.9 Memory space and circuit prog ram size LOGO! 132 Manual, 04/2011, A5E03556174-01 Function Program memory Rem memory* Analog multiplexer 20 - Analog ramp 36 - PI controller 40 2 Others Latching relay 8 1 Pulse relay 12 1 Message texts 8 - Softkey 8 2 Shift register 12 1 *: Bytes in the Rem memory ar ea if retentivity is enabled ...

  • Siemens 6ED1050-1AA00-0BE8 - page 133

    Programming LOGO! 3.9 Memory space and circuit program si ze LOGO! Manual, 04/2011, A5E03556174-01 133 Function Program memory Rem memory* Yearly timer 12 - Astronomical clock 20 - Stopwatch 28 17 Counters Up/down counter 32 5 Hours counter 36 9 Threshold trigger 16 - Analog Analog threshold trigger 20 - Analog differential trigger 20 - Analog comp ...

  • Siemens 6ED1050-1AA00-0BE8 - page 134

    Programming LOGO! 3.9 Memory space and circuit prog ram size LOGO! 134 Manual, 04/2011, A5E03556174-01 Calculating memory requirements When calculating the memory req uirements of a circuit, you mus t always take into account all individual areas of memory. Example: 00 '' 1R 3DU , [ , , 3DU , [ 4 4 % % % [ ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 135

    Programming LOGO! 3.9 Memory space and circuit program si ze LOGO! Manual, 04/2011, A5E03556174-01 135 Indication of available memory space LOGO! shows you the amount of free memory space. Proceed as follows: 1. Switch LOGO! to programming mode (as a reminder, refer to the topic " The four golden rules for operating LOGO! (Page 79)". 2. S ...

  • Siemens 6ED1050-1AA00-0BE8 - page 136

    Programming LOGO! 3.9 Memory space and circuit prog ram size LOGO! 136 Manual, 04/2011, A5E03556174-01 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 137

    LOGO! Manual, 04/2011, A5E03556174-01 137 LOGO! functions 4 LOGO! provides you with various elements in progra mming mode, w hich are organized in the following lists: ● ↓Co: Connector lis t (Connector) (Page 138) ● ↓GF: List of the basic fu nctions AND, OR, ... (Page 142) ● ↓SF: List of the special functions (Page 156) ● ↓BN: List ...

  • Siemens 6ED1050-1AA00-0BE8 - page 138

    LOGO! functions 4.1 Constants and con nectors - Co LOGO! 138 Manual, 04/2011, A5E03556174-01 4.1 Constants and connectors - Co Constants and connectors (Co) represent inputs, outputs, flags, constant voltage levels (constants), and network digit al and analog input s/outputs (if 0BA7). Inputs: 1) Digital inputs Digital inputs are identified with an ...

  • Siemens 6ED1050-1AA00-0BE8 - page 139

    LOGO! functions 4.1 Constants and con nectors - Co LOGO! Manual, 04/2011, A5E03556174-01 139 2) Analog outputs Analog outputs are identified by the letters AQ . Two analog outputs are avail able, namely AQ1 and AQ2. An analog output can o nly be connected with the an alog input of a function, an analog flag AM or an analog output conne ctor. The fo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 140

    LOGO! functions 4.1 Constants and con nectors - Co LOGO! 140 Manual, 04/2011, A5E03556174-01 Message text character set flag M27 The M27 flag selects between the two ch aracter sets that LOGO! uses to display message texts. State 0 corresponds to C haracter S et 1, and state 1 corr esponds to Character Set 2. If M27=0 (low), only message texts conf ...

  • Siemens 6ED1050-1AA00-0BE8 - page 141

    LOGO! functions 4.1 Constants and con nectors - Co LOGO! Manual, 04/2011, A5E03556174-01 141 Network inputs/outputs (available only in 0BA7 if configured fr o m LOGO!Soft Comfort) You can configure the following network inputs/outputs only fro m LOGO!Soft Comfort. If the circuit program in LOGO! contains a network digital/analog I/O, you can not ed ...

  • Siemens 6ED1050-1AA00-0BE8 - page 142

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! 142 Manual, 04/2011, A5E03556174-01 4.2 Basic functions list - GF Basic functions represent simpl e logical elements of Boolean al gebra. You can invert the i nputs of individual bas ic functions, that i s, the circuit program inverts a logical "1" at a relevant inpu t to a logica l &qu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 143

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! Manual, 04/2011, A5E03556174-01 143 View in the circuit d iagram View in LOGO! N ame of the basic fun ction 'RXE OHFKDQ JHRYH UFR QWDF W 4    XOR (Page 149) (exclusive OR) %UHD NFR QWDF W 4   NOT (Page 149) (negation, inverter) 4.2.1 AND   ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 144

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! 144 Manual, 04/2011, A5E03556174-01 4.2.2 AND with edge evaluation 4 ൹     6 PEROLQ /2*2 The output of an edge trigge red AND is only 1 if all inputs are 1 and if at least one input was low in the previous cycle. At an unused block input (x): ...

  • Siemens 6ED1050-1AA00-0BE8 - page 145

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! Manual, 04/2011, A5E03556174-01 145 4.2.3 NAND (not AND)      4 3DUD OOH OFLU FXL WZL WKPX OWL SOHE UH DN FR QW DF WVLQW KHF LUF XL WGLD JUD P 6 PEROLQ /2*2 The output of the NAND is only 0 if the status at all inputs is 1, i.e. the ...

  • Siemens 6ED1050-1AA00-0BE8 - page 146

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! 146 Manual, 04/2011, A5E03556174-01 4.2.4 NAND with edge evaluation 4 ൻ     6 PEROLQ /2*2 The output status of the NAND with edge evaluation is only 1 if at least one input is 0 and if all inputs were 1 in the previous cycle. At an unused blo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 147

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! Manual, 04/2011, A5E03556174-01 147 4.2.5 OR     ุ 4 &LU FXL WGLD JUD PRIDSD UD OOHOF LU FX LW ZL WKVHYH UD OPDNHF RQW DF W V 6 PEROLQ /2*2 The output status of the OR element is only 1 if at least one input is 1, i.e. at least one ...

  • Siemens 6ED1050-1AA00-0BE8 - page 148

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! 148 Manual, 04/2011, A5E03556174-01 4.2.6 NOR (not OR)     ุ 4 &LU FXL WGLD JU DPRIDV HU LH VFLU FX LW ZL WKVHYH UD OEUH DNF RQ WDF W V 6 PEROLQ /2*2 The output status of the NOR is only 1 if all inputs are 0, i.e. if switc hed off. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 149

    LOGO! functions 4.2 Basic functions lis t - GF LOGO! Manual, 04/2011, A5E03556174-01 149 4.2.7 XOR (exclusive OR)    4 7KH;2 5LQDF LUF XLWG LDJ UD PVKR ZQ DVVH UL HVF LU FXL WZL WKF KDQ JHRYH U FRQ WDFW V 6 PEROLQ /2*2 The output status of the XO R is 1 if the inputs are not equ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 150

    LOGO! functions 4.3 Special Functions LOGO! 150 Manual, 04/2011, A5E03556174-01 4.3 Special Functions Because of their different inpu t designation, you can see right away that there is a difference between the special functions a nd basic functions. S pecial func tions (SFs) contain timer functions, retentive functions and va rious parameter assig ...

  • Siemens 6ED1050-1AA00-0BE8 - page 151

    LOGO! functions 4.3 Special Functions LOGO! Manual, 04/2011, A5E03556174-01 151 Connector X at SF inputs SF inputs connected to connector x are set low. That is, the in puts carry a 'lo' signal. Parameter inputs At some of the inputs you do not apply any s ignals. You configu re the relevant block val ues instead. Exa mples: ● Par (Para ...

  • Siemens 6ED1050-1AA00-0BE8 - page 152

    LOGO! functions 4.3 Special Functions LOGO! 152 Manual, 04/2011, A5E03556174-01 Accuracy of T Because of slight tolera nces in the characteristics of electron ic components, the set time T can deviate. You can find a deta iled description of such devi at ions in the "On-delay" topic (Page 160). Accuracy of the timer (weekly/yearly timer) ...

  • Siemens 6ED1050-1AA00-0BE8 - page 153

    LOGO! functions 4.3 Special Functions LOGO! Manual, 04/2011, A5E03556174-01 153 4.3.4 Retentivity The switching states, count er and time values of many SFs (see the " Special functions list - SF (Page 156)" topic) can be set retentive . This means that current data values are retained after a power failure, and that t he block resumes op ...

  • Siemens 6ED1050-1AA00-0BE8 - page 154

    LOGO! functions 4.3 Special Functions LOGO! 154 Manual, 04/2011, A5E03556174-01 4.3.6 Calculating the gain and offset of analog values A sensor is connected to the anal og input and converts a proces s variable into an electrical signal. This value of signal lie s within the typical range of t his se nsor. LOGO! always converts the elec trical sign ...

  • Siemens 6ED1050-1AA00-0BE8 - page 155

    LOGO! functions 4.3 Special Functions LOGO! Manual, 04/2011, A5E03556174-01 155 Example of analog values Process variable Voltage (V) In ternal value Gain Offset Value s hown (Ax) -30 °C 0 °C +70 °C 0 3 10 0 300 1000 0.1 0.1 0.1 -30 -30 -30 -30 0 70 1000 mbar 3700 mbar 5000 mbar 0 6.75 10 0 675 1000 4 4 4 1000 1000 1000 1000 3700 5000 0 5 10 0 5 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 156

    LOGO! functions 4.4 Special functions list - SF LOGO! 156 Manual, 04/2011, A5E03556174-01 4.4 Special functions list - SF When you create your circuit p rogram in LOGO!, you find the spe cial function blocks in the SF list. You can invert the i nputs of SFs individually, that is, the cir cuit program converts a logical "1" at the input in ...

  • Siemens 6ED1050-1AA00-0BE8 - page 157

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 157 View in LOGO! Name of t he special funct ion Rem 4 (Q 3DU Random generator (Page 177) 4 7UJ 3DU Stairway lighting switch (Page 179) REM 4 7UJ 5 3DU Multiple function switch (Page 182) REM LOGO! 0BA6: 4 1R 1R 1R 3DU LOGO! 0BA7: 4 3DU Weekly timer (Page ...

  • Siemens 6ED1050-1AA00-0BE8 - page 158

    LOGO! functions 4.4 Special functions list - SF LOGO! 158 Manual, 04/2011, A5E03556174-01 View in LOGO! Name of t he special funct ion Rem K 4 5 (Q 5DO 3DU Hours counter (Page 2 05) REM 4 )UH 3DU Threshold trigger (Page 210) Analog $ 4 $[ 3DU Analog threshold trigger (Page 213) $ ˂ 4 $[ 3DU Analog differential trigger (Pag e 216) ˂$ 4 $[ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 159

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 159 View in LOGO! Name of t he special funct ion Rem $ᇄ $4 (Q 6HO 6W 3DU Analog Ramp (Page 2 51) $ᇄ $4 $0 5 39 3DU PI controller (Page 256) REM $4 $[ $[ 3DU Analog filter (0BA7 only) (Page 271) $4 $[ (Q 6 $[ 3DU Max/Min (0BA7 only) (Page 2 73) REM ...

  • Siemens 6ED1050-1AA00-0BE8 - page 160

    LOGO! functions 4.4 Special functions list - SF LOGO! 160 Manual, 04/2011, A5E03556174-01 View in LOGO! Name of t he special funct ion Rem 4 ,Q 7UJ 'LU 3DU Shift register (Page 245) REM  (ᇄ 4 (Q 5 3DU Mathematic instruction error detection (Page 268) 4.4.1 On-delay Short description The output is only set after a configurable on-delay tim ...

  • Siemens 6ED1050-1AA00-0BE8 - page 161

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 161 If your LOGO! is a LOGO! 0BA7, you can additionally use the actual v alues of the following functions: ● Analog filter (0BA7 only) (Page 271) (actual value AQ) ● Average value (0BA7 only) (Page 276) (actual value AQ) ● Max/Min (0BA7 only) (Page 273) (act ...

  • Siemens 6ED1050-1AA00-0BE8 - page 162

    LOGO! functions 4.4 Special functions list - SF LOGO! 162 Manual, 04/2011, A5E03556174-01 Valid ranges of the timebase, if T = Actual value of an already -programmed function Timebase max. value Meaning Accuracy ms 99990 Number of ms + 10 ms s 5999 Number of s + 1 s m 5999 Number of min + 1 min The display in programming mode (example): 7ൺ% ...

  • Siemens 6ED1050-1AA00-0BE8 - page 163

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 163 The view in parameter assi gnment mode (example ): 7D K 7 K % 7D K 7ൺ%P % RU FXUUHQW WLPH Timing diagram 4 7U J 7 7 7KHE RO GVH FW LR QRIWK H WLP LQJGL D ...

  • Siemens 6ED1050-1AA00-0BE8 - page 164

    LOGO! functions 4.4 Special functions list - SF LOGO! 164 Manual, 04/2011, A5E03556174-01 4.4.2 Off-delay Short description When an on-delay is set, the output is reset when the configure d time has ex pired. Symbol in LOGO! Wiring Description Input Trg The off-delay timer star ts with a neg ative edge (1 to 0 transition) at input Trg (Trigger) Inp ...

  • Siemens 6ED1050-1AA00-0BE8 - page 165

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 165 ● Retentive on-delay (Page 168) (current time Ta) ● Wiping relay (pulse output) (Page 170) (current time Ta) ● Edge triggered wiping relay (Page 172) (current time Ta) ● Asynchronou s pulse generator (Page 175) (current time Ta) ● Stairway lighting s ...

  • Siemens 6ED1050-1AA00-0BE8 - page 166

    LOGO! functions 4.4 Special functions list - SF LOGO! 166 Manual, 04/2011, A5E03556174-01 4.4.3 On-/Off-delay Short description The on-/off-delay function sets the output after the set on-del ay time has expired, and resets it upon expiration of the off-delay time. Symbol in LOGO! Wiring Description Input Trg A positive edge (0 to 1 transition) at ...

  • Siemens 6ED1050-1AA00-0BE8 - page 167

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 167 ● On-delay (Page 160) (current time Ta) ● Off-delay (Page 164) (current time Ta) ● On-/off-delay (current time Ta) ● Retentive on-delay (Page 168) (current time Ta) ● Wiping relay(pulse output) (Page 170) (current time Ta) ● Edge triggered wiping r ...

  • Siemens 6ED1050-1AA00-0BE8 - page 168

    LOGO! functions 4.4 Special functions list - SF LOGO! 168 Manual, 04/2011, A5E03556174-01 4.4.4 Retentive on-delay Short description A one-shot at the input triggers a configurable on-delay time. The output is set when this time has expired. Symbol in LOGO! Wiring Description Input Trg A signal at input Trg (Trigger) triggers the o n-delay timer. I ...

  • Siemens 6ED1050-1AA00-0BE8 - page 169

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 169 ● Retentive on-delay (current time Ta) ● Wiping relay(pulse output) (Page 170) ( current time Ta) ● Edge triggered wiping relay (Page 172) (current time Ta) ● Asynchronou s pulse generator (Page 175) (current time Ta) ● Stairway light switch (Page 17 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 170

    LOGO! functions 4.4 Special functions list - SF LOGO! 170 Manual, 04/2011, A5E03556174-01 4.4.5 Wiping relay (pulse output) Short description An input signal generates a signal with a configurable period a t the output. Symbol in LOGO! Wiring Description Input Trg A signal at input Trg (Trigger) triggers the time for the wiping relay function. Para ...

  • Siemens 6ED1050-1AA00-0BE8 - page 171

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 171 ● Wiping relay (pulse output) (current time Ta) ● Edge triggered wiping relay (Page 172) (current time Ta) ● Asynchronou s pulse generator (Page 175) (current time Ta) ● Stairway light switch (Page 179) (current time Ta) ● Multiple function switch (P ...

  • Siemens 6ED1050-1AA00-0BE8 - page 172

    LOGO! functions 4.4 Special functions list - SF LOGO! 172 Manual, 04/2011, A5E03556174-01 4.4.6 Edge triggered wiping relay Short description An input pulse generates a preset number of output pulses with a defined pulse/ pause ratio (retriggerable), after a confi gured delay time has expired. Symbol in LOGO! Wiring Description Input Trg A signal a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 173

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 173 ● Max/Min (0BA7 only) (Page 273) (actual value AQ) ● On-delay (Page 160) (current time Ta) ● Off-delay (Page 164) (current time Ta) ● On-/off-delay (Page 166) (current time Ta) ● Retentive on-delay (Page 168) (current time Ta) ● Wiping relay(pulse ...

  • Siemens 6ED1050-1AA00-0BE8 - page 174

    LOGO! functions 4.4 Special functions list - SF LOGO! 174 Manual, 04/2011, A5E03556174-01 Setting the Par parameter View in programming mode (example): 7+ V 7/ V %5 3URWHFWLRQPRGHDQGUHWHQWLYLW 3XOVHZLGWK ,QWHUSXOVHZLGWK Press 1  % ...

  • Siemens 6ED1050-1AA00-0BE8 - page 175

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 175 4.4.7 Asynchronous pulse generator Short description The output pulse shape can be modi fied by reconfiguring the p ul se/pause ratio. Symbol in LOGO! Wiring Description Input En You can use inpu t EN to set and reset the asynchronous puls e generator. Input I ...

  • Siemens 6ED1050-1AA00-0BE8 - page 176

    LOGO! functions 4.4 Special functions list - SF LOGO! 176 Manual, 04/2011, A5E03556174-01 ● On-/off-delay (Page 166) (current time Ta) ● Retentive on-delay (Page 168) (current time Ta) ● Wiping relay(pulse output) (Page 170) ( current time Ta) ● Edge triggered wiping relay (Page 172) (current time Ta) ● Aysnchronous pulse gener ator (curr ...

  • Siemens 6ED1050-1AA00-0BE8 - page 177

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 177 4.4.8 Random generator Short description The output of the random generator is set or reset wit hin a con figured time. Symbol in LOGO! Wiring Description Input En A positive edge ( 0 to 1 transition) at input En (Enable) triggers the on-delay time of the rand ...

  • Siemens 6ED1050-1AA00-0BE8 - page 178

    LOGO! functions 4.4 Special functions list - SF LOGO! 178 Manual, 04/2011, A5E03556174-01 ● Off-delay (Page 164) (current time Ta) ● On-/off-delay (Page 166) (current time Ta) ● Retentive on-delay (Page 168) (current time Ta) ● Wiping relay(pulse output) (Page 170) ( current time Ta) ● Edge triggered wiping relay (Page 172) (current time ...

  • Siemens 6ED1050-1AA00-0BE8 - page 179

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 179 4.4.9 Stairway lighting switch Short description An input edge triggers a configurable a nd retriggerable time. T he output is reset after this time has expired. A warning sig nal can be output before this ti me has expi red to warn of the impending shutdown. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 180

    LOGO! functions 4.4 Special functions list - SF LOGO! 180 Manual, 04/2011, A5E03556174-01 ● Off-delay (Page 164) (current time Ta) ● On-/off-delay (Page 166) (current time Ta) ● Retentive on-delay (Page 168) (current time Ta) ● Wiping relay(pulse output) (Page 170) (current time Ta) ● Edge triggered wiping relay (Page 172) (current time T ...

  • Siemens 6ED1050-1AA00-0BE8 - page 181

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 181 Setting the Par parameter Note the defaults specified in topic Time response (Page 151). Note All times must have the same timebase. View in programming mode (example): 7 V %5 3URWHFWLRQPRGHDQGUHWHQWL ...

  • Siemens 6ED1050-1AA00-0BE8 - page 182

    LOGO! functions 4.4 Special functions list - SF LOGO! 182 Manual, 04/2011, A5E03556174-01 4.4.10 Multiple function switch Short description Switch with two different functions: ● Pulse switch with off-delay ● Switch (permanent lighting) Symbol in LOGO! Wiring Description Input Trg A signal at inpu t Trg (Trigger) sets output Q (permanent light) ...

  • Siemens 6ED1050-1AA00-0BE8 - page 183

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 183 If your LOGO! is a LOGO! 0BA7, you can additionally use the actual v alues of the following functions: ● Analog filter (0BA7 only) (Page 271) (actual value AQ) ● Average value (0BA7 only) (Page 276) (actual value AQ) ● Max/Min (0BA7 only) (Page 273) (act ...

  • Siemens 6ED1050-1AA00-0BE8 - page 184

    LOGO! functions 4.4 Special functions list - SF LOGO! 184 Manual, 04/2011, A5E03556174-01 Setting the Par parameter Note the defaults spec ified in the topic " Time response (Page 151)". Note T, T ! and T !L must all have the same timebase . View in programming mode (example): 7/ V 7 V %? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 185

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 185 4.4.11 Weekly timer Short description The output is controlled by mean s of a configurable on/off date . The function support s any combination of weekda ys. You sele ct the active weekdays by hidi ng the inactive days. Note Because LOGO! 24/24o d oes not have ...

  • Siemens 6ED1050-1AA00-0BE8 - page 186

    LOGO! functions 4.4 Special functions list - SF LOGO! 186 Manual, 04/2011, A5E03556174-01 Functional description Each weekly timer has three cams you can use to configure a tim e hysteresis. You specif y the on- and off-times at the Cam parameters. The weekly timer s ets the output at a certain on-time, if this is not already set. The weekly timer ...

  • Siemens 6ED1050-1AA00-0BE8 - page 187

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 187 Days of the week The prefix "D=" (Day) ha s the following meaning: ● M: Monday ● T: Tuesday ● W: Wednesday ● T: Thursday ● F: Friday ● S: Saturday ● S: Sunday Uppercase letters indicate a spe cific day of the week. A "-" in di ...

  • Siemens 6ED1050-1AA00-0BE8 - page 188

    LOGO! functions 4.4 Special functions list - SF LOGO! 188 Manual, 04/2011, A5E03556174-01 Weekly timer: Example The output of the weekly timer sw itch is to be set daily from 0 6:30 h to 08:00 h. The output should also be set every Tuesday from 03:10 h to 04: 15 h, and o n the weekends from 16:30 h to 23:10 h. This requires three cams. Here are the ...

  • Siemens 6ED1050-1AA00-0BE8 - page 189

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 189 Cam3 Cam No3 must set the output of the weekly timer switch every Sa turday and Sunday from 16:30 h to 23:10 h. View in LOGO! 0BA6: 2II  2Q  ' ෥෥෥෥෥66 % View in LOGO! 0BA7: 2II ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 190

    LOGO! functions 4.4 Special functions list - SF LOGO! 190 Manual, 04/2011, A5E03556174-01 4.4.12 Yearly timer Short description The output is controlled by mean s of a configurable on/off date . You can configu re the timer to activate on a yearly, monthly , or user-defined time basis. W ith any mode, you can also configure the timer to pulse the o ...

  • Siemens 6ED1050-1AA00-0BE8 - page 191

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 191 Example 2: Yearly mode on, Monthly mode off, Pulse on, On Time = 2000-03-1 5, Off Time = 2099-**-**: Every year on March 15 , the timer switches on for o ne cycle.         4      <<<< ...

  • Siemens 6ED1050-1AA00-0BE8 - page 192

    LOGO! functions 4.4 Special functions list - SF LOGO! 192 Manual, 04/2011, A5E03556174-01 Example 5: Yearly mode off, Monthly mode o ff, Puls e off, On Time = 2008-06 -01, Off Time = 2008-08-31: On June 1, 2 008 the ti mer output switches on and re mains on until August 31, 2010.         4  ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 193

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 193 Example 8: Yearly mode on, Monthly mode on, On Time = 2008-**-01, Off Time = 2010-**- 05: Starting in 2008, on the first day of each month the timer output switches on and switches off on the fifth day of the month. The timer continues in this pattern through ...

  • Siemens 6ED1050-1AA00-0BE8 - page 194

    LOGO! functions 4.4 Special functions list - SF LOGO! 194 Manual, 04/2011, A5E03556174-01 Backup of the real-time clock The internal real-time clock of LOGO! is buffered agai nst power failure. The buffering time is influenced by the ambient temper ature, and is typically 80 hours at an ambient temperature of 25°C. If you are using the opti onal L ...

  • Siemens 6ED1050-1AA00-0BE8 - page 195

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 195 4.4.13 Astronomical clock (0BA7 only) Short description The astronomical cl ock function is used to set an output high w hen the current time of your LOGO! Base Module is betwee n the time of sunrise (TR) and the t ime of sunset (TS). LOGO! automatically calcu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 196

    LOGO! functions 4.4 Special functions list - SF LOGO! 196 Manual, 04/2011, A5E03556174-01 Timing diagram The following illustration is an example of the timing diagram where Ta refers to the current time of the LOGO! Base Module: 4 75 7D 7D 7D 76 75 76 75 76 0RQG D 7X H V G D :HG QH V GD  Functional description The function calculate ...

  • Siemens 6ED1050-1AA00-0BE8 - page 197

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 197 View in parameter assign ment mode (example):  % /RQJLWXGH ($67 ಬರ Press  % /DWLWXGH 1257+ ಬರ If automatic summertime/winterti me conversion is disabled, pres s and LOGO! shows the following v ...

  • Siemens 6ED1050-1AA00-0BE8 - page 198

    LOGO! functions 4.4 Special functions list - SF LOGO! 198 Manual, 04/2011, A5E03556174-01 4.4.14 Stopwatch (0BA7 only) Short description The stopwatch function counts t he elapsed time between a start stopwatch signal and a stop stopwatch signal. Symbol in LOGO! Wiring Description En A signal at input En begins counting e lapsed time at analog outp ...

  • Siemens 6ED1050-1AA00-0BE8 - page 199

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 199 Timing diagram 5 /DS 7 $4 &XU 7 /DS (Q Functional description En = 1 and Lap = 0: U sing the selected tim ebase, the stopwatch outputs the current time (CurT) to AQ. En = 1 and Lap = 1: The stopwatch leaves AQ at its last value w hen Lap = 0. This val ue i ...

  • Siemens 6ED1050-1AA00-0BE8 - page 200

    LOGO! functions 4.4 Special functions list - SF LOGO! 200 Manual, 04/2011, A5E03556174-01 Setting the Par para meter View in programming mode (example):  % 7% PV 3URWHFWLRQPRGHDQGUHWHQWLYLW 7LPHEDVH To change the timebase, press to move the curs or to "1". Press or to select another timebase. To co ...

  • Siemens 6ED1050-1AA00-0BE8 - page 201

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 201 4.4.15 Up/down counter Short description An input pulse increments or decrements an internal v alue, depe nding on the parameter setting. The output is set or reset when a configu red threshold is reached. The direction of count can be changed with a signal at ...

  • Siemens 6ED1050-1AA00-0BE8 - page 202

    LOGO! functions 4.4 Special functions list - SF LOGO! 202 Manual, 04/2011, A5E03556174-01 Parameters On and Off The on threshold On and the o ff threshold Off can be provided b y the actual value of another already-programmed function. You can use the actua l values of t he following functions: ● Analog comparator (Page 218) (actual value Ax – ...

  • Siemens 6ED1050-1AA00-0BE8 - page 203

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 203 Timing diagram 4 5 ,QWHUQDO FR XQWYDO XH &QW 6W DU W 9DO &QW 2Q 2I I  'LU Functional description The internal counter increments (D ir = 0) or decrement s (Dir = 1) by one count with every positive edge at input Cnt. You can use inp ...

  • Siemens 6ED1050-1AA00-0BE8 - page 204

    LOGO! functions 4.4 Special functions list - SF LOGO! 204 Manual, 04/2011, A5E03556174-01 To set the start value, press or to access the following sc reen form: 679  %5 If the referenced block (B021, in the ex ample) returns a value that lies out of the valid range, the value is rounded to the next valid ...

  • Siemens 6ED1050-1AA00-0BE8 - page 205

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 205 4.4.16 Hours counter Short description A configured time is triggered with a sign al at the monitoring input. The output is set when this time has expired. Symbol in LOGO! Wiring Description Input R A positive edge (0 to 1 transition) at input R resets output ...

  • Siemens 6ED1050-1AA00-0BE8 - page 206

    LOGO! functions 4.4 Special functions list - SF LOGO! 206 Manual, 04/2011, A5E03556174-01 Parameter MI The maintenance interval MI can be provided by the actual value of another already- programmed function. The timebase of the referenced value is "h " (for hours) only. You can use the actual values of the following functions: ● Analog ...

  • Siemens 6ED1050-1AA00-0BE8 - page 207

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 207 Timing diagram 0, K 01  27 01 0, (Q 5DO 5 4 3DU 0, & RQI L JXU HGW LPHL QWHU YDO 01 7 LPH  WR  J R 27 7 RW DOW LPHH[ SLU HGV LQF HW KHODV WKLVL JQD ODWLQS XW5 DO Functional description Th ...

  • Siemens 6ED1050-1AA00-0BE8 - page 208

    LOGO! functions 4.4 Special functions list - SF LOGO! 208 Manual, 04/2011, A5E03556174-01 Limit value of OT The value of the operating hours in OT is retained when yo u res et the hours counter with a signal at input R. The hours counter OT will be reset to zero w ith a transition from 0 to 1 at Ral. The hours counter OT contin ues the count as lon ...

  • Siemens 6ED1050-1AA00-0BE8 - page 209

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 209 For information on how to assign the actual value of another al ready-programmed functio n to a parameter, see the On-delay (P age 160) topic. View in parameter assi gnment mode: P 0, K % ...

  • Siemens 6ED1050-1AA00-0BE8 - page 210

    LOGO! functions 4.4 Special functions list - SF LOGO! 210 Manual, 04/2011, A5E03556174-01 4.4.17 Threshold trigger Short description The output is set and reset with two configura ble threshold tri ggers. Symbol in LOGO! Wiring Description Input Fre The function counts t he 0 to 1 transitions at input F re. 1 to 0 transitions are not counted. Use ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 211

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 211 If your LOGO! is a LOGO! 0BA7, you can additionally use the actual v alues of the following functions: ● Analog filter (0BA7 only) (Page 271) (actual value AQ) ● Average value (0BA7 only) (Page 276) (actual value AQ) ● Max/Min (0BA7 only) (Page 273) (act ...

  • Siemens 6ED1050-1AA00-0BE8 - page 212

    LOGO! functions 4.4 Special functions list - SF LOGO! 212 Manual, 04/2011, A5E03556174-01 Calculation rule ● If the On threshold ≥ Off threshold, then: Q = 1, if f a > On Q = 0, if f a ≤ Off. ● If the On threshold < Off threshold, then Q = 1 if On ≤ f a < Off. Setting the Par parameter Note The system scans the counter lim it val ...

  • Siemens 6ED1050-1AA00-0BE8 - page 213

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 213 4.4.18 Analog thresh old trigger Short description The output is set and reset at tw o configurable thresholds. Symbol in LOGO! Wiring Description Input Ax Input Ax is one of the following ana log signals: • AI1 to AI8 (*) • AM1 to AM6 (if 0BA6) or AM1 to ...

  • Siemens 6ED1050-1AA00-0BE8 - page 214

    LOGO! functions 4.4 Special functions list - SF LOGO! 214 Manual, 04/2011, A5E03556174-01 If your LOGO! is a LOGO! 0BA7, you can additionally use the actual v alues of the following functions: ● Analog filter (0BA7 only) (Page 271) (actual value AQ) ● Average value (0BA7 only) (Page 276) (actual value AQ) ● Max/Min (0BA7 only) (Page 273) (0BA ...

  • Siemens 6ED1050-1AA00-0BE8 - page 215

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 215 Calculation rule ● If the On threshold ≥ Off threshold, then: Q = 1, if the actual value Ax > On Q = 0, if the actual value Ax ≤ Off. ● If the On threshold < Off threshold, then Q = 1 if On ≤ actual value Ax < Off. Setting the Par parameter ...

  • Siemens 6ED1050-1AA00-0BE8 - page 216

    LOGO! functions 4.4 Special functions list - SF LOGO! 216 Manual, 04/2011, A5E03556174-01 4.4.19 Analog differential trigger Short description The output is set and reset depending o n a configurable thresho ld and a differential value. Symbol in LOGO! Wiring Description Input Ax Input Ax is one of t he following anal og signals: • AI1 to AI8 (*) ...

  • Siemens 6ED1050-1AA00-0BE8 - page 217

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 217 Timing diagram B: Function with positive difference Δ $[ 4 2Q 2I I 2 Q˂ Functional description The function fetches the analog signal at input Ax. Ax is multiplied by the value o f the A (gain) parameter, and th e value at parameter B (offset) ...

  • Siemens 6ED1050-1AA00-0BE8 - page 218

    LOGO! functions 4.4 Special functions list - SF LOGO! 218 Manual, 04/2011, A5E03556174-01 View in parameter assign ment mode (example): $[  ෙ  2Q  % 4 $ [ !2Q 'LIIHUHQWLDOYDOXHIRUWKHRII WKUHVKROG 2QWKUHVKROG Press 2II ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 219

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 219 Gain and offset parameters For more information on the gain and offset parameters, refer t o topic " Calculating the gain and offset of analog values (Page 154)". Parameters On and Off The on threshold On and the o ff threshold Off can be provided b ...

  • Siemens 6ED1050-1AA00-0BE8 - page 220

    LOGO! functions 4.4 Special functions list - SF LOGO! 220 Manual, 04/2011, A5E03556174-01 Parameter p (number of decimals) Applies only to Ax, Ay, On, Off and Δ values displayed in a mes sage text. Does not apply to the comparis on of on and off values! (The compare function ignores the decimal point.) Timing diagram     $ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 221

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 221 Setting the Par parameter The gain and offset parameters are used to adapt the sensors to the relevant application. View in programming mode: 2II  2Q  % 3DUDPHWHUSURWHFWLRQPRGH 2IIWK ...

  • Siemens 6ED1050-1AA00-0BE8 - page 222

    LOGO! functions 4.4 Special functions list - SF LOGO! 222 Manual, 04/2011, A5E03556174-01 Configuration (exa mple): 2II  2Q  % 3URWHFWLRQPRGH 2IIWKUHVKROG 2QWKUHVKROG Press S  %  $  % 'H ...

  • Siemens 6ED1050-1AA00-0BE8 - page 223

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 223 Function block diagram ˂$ % % % $, $,  $, $, 4 2IIGHO D 2QGHOD $QDORJFRPSDU DWRU 4.4.21 Analog watchdog Short description This special function saves the process variable of an analog i nput to memory, and sets the output when t ...

  • Siemens 6ED1050-1AA00-0BE8 - page 224

    LOGO! functions 4.4 Special functions list - SF LOGO! 224 Manual, 04/2011, A5E03556174-01 Gain and offset parameters For more information on gain and offset parameters, refer to to pic " Calculating the gain and offset of analog values (Page 154)". Parameters Delta1 and Delta2 The Delta1 and Delta2 parameters can be provided b y the actua ...

  • Siemens 6ED1050-1AA00-0BE8 - page 225

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 225 Parameter p (number of decimals) Applies only to the Aen, Ax, Δ 1 and Δ 2 values displayed in a message text. Timing diagram (Q $[ $HQ $HQ ࿽ ˂  ࿽ $HQ˂  4 Functional description A 0 to 1 transition at input En saves the value of ...

  • Siemens 6ED1050-1AA00-0BE8 - page 226

    LOGO! functions 4.4 Special functions list - SF LOGO! 226 Manual, 04/2011, A5E03556174-01 View in parameter assign ment mode (example): $[  $HQ  ෙ  % 4 $[LVRXWRIWKHUDQJHRI $HQෙWR$HQෙ ෙ ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 227

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 227 Gain and offset parameters Please note the information on gain and offset parameters in to pic Calculating the gain and offset of analog values (Page 154). Parameter p (number of decimals) Applies only to the AQ value in a message text. Functional description ...

  • Siemens 6ED1050-1AA00-0BE8 - page 228

    LOGO! functions 4.4 Special functions list - SF LOGO! 228 Manual, 04/2011, A5E03556174-01 View in parameter assign ment mode (example): $4  %  $  % 4.4.23 Latching relay Short description Input S sets output Q, input R resets output Q again. Symbol in LOGO! Wiring Description Inpu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 229

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 229 4.4.24 Pulse relay Short description A short pulse at the input sets and resets the output. Symbol in LOGO! Wiring Description Input Trg You set and reset out put Q with a signa l at input Trg (Trigger). Input S You set output Q wit h a signal at input S. Inpu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 230

    LOGO! functions 4.4 Special functions list - SF LOGO! 230 Manual, 04/2011, A5E03556174-01 Status diagram Par Q n-1 S R T r g Q n * 0 0 0 0 0 * 0 0 0 0 - > 1 1 ** * 0 0 1 0 0 * 0 0 1 0 ->1 0 * 0 1 0 0 1 * 0 1 0 0 ->1 1 R S 0 1 1 0 0 R S 0 1 1 0 - > 1 0 S R 0 1 1 0 1 S R 0 1 1 0 - > 1 1 * 1 0 0 0 1 * 1 0 0 0 - > 1 0 * * * 1 0 1 0 0 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 231

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 231 4.4.25 Message texts Short description With the message text function bl ock, you can configure a messa ge that includes text and other parameters for LOGO ! to dis play in RUN mode. You can configure simple messa ge texts from the LOGO! onboard d isplay. LOGO ...

  • Siemens 6ED1050-1AA00-0BE8 - page 232

    LOGO! functions 4.4 Special functions list - SF LOGO! 232 Manual, 04/2011, A5E03556174-01 ● Current Character Se t: which character set is selected for the display of me ssage text s Note Message texts support ed by LOGO! 0BA5 will display on the LOGO! TD only when the following conditions are met: - CharSet1 is selected and set to ISO8859-1 - Cu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 233

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 233 Programming Global Message Text Paramet ers (GLW &OHDU3UJ 3DVVZRUG !0VJ&RQILJ ႣႭ PV VV PV ,62 ,62 ,62 ,6 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 234

    LOGO! functions 4.4 Special functions list - SF LOGO! 234 Manual, 04/2011, A5E03556174-01 Symbol in LOGO! Wiring Description Parameter Text: Inpu t of the message text Par: Parameter or actual value of another already- programmed function (see "Visible parameters or process variables") Time: Display of the contin uo usly updated time-of-d ...

  • Siemens 6ED1050-1AA00-0BE8 - page 235

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 235 Restriction A maximum of 50 message texts are available. Functional description When LOGO! is in RUN mode, LOGO ! displays the message text that you have configured along with its parameter values upon a 0 to 1 transition of the signal at input En. Based on yo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 236

    LOGO! functions 4.4 Special functions list - SF LOGO! 236 Manual, 04/2011, A5E03556174-01 Example This is how two message texts could be shown:    0R Ⴍ Ⴃ Ⴍ Ⴃ ([DPSOH0HVVDJH WH[WZLWKSULRULW  ([DPSOH0HVVDJH WH[WZLWKSULRULW  ...

  • Siemens 6ED1050-1AA00-0BE8 - page 237

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 237 Example: Tick Message Character by Character The following illustration shows a one-line, 24-character messa ge text: ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ; ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 238

    LOGO! functions 4.4 Special functions list - SF LOGO! 238 Manual, 04/2011, A5E03556174-01 Input P configuration From the input P, you configure the following characteristics o f the message text: ● Priority ● Acknowledge ment ● Message destination ● Tick type, and tick setting for each line To configure the priority and t he acknowledgment ...

  • Siemens 6ED1050-1AA00-0BE8 - page 239

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 239 5. If your message text has lines that tick , press to position the cursor on the "Ch by Ch" line and then press or to selec t either "Ch by Ch" or "Ln by Ln" for the TickType. 6. From the Tick Type screen, press to enable or disa ...

  • Siemens 6ED1050-1AA00-0BE8 - page 240

    LOGO! functions 4.4 Special functions list - SF LOGO! 240 Manual, 04/2011, A5E03556174-01 Special function Parameter or process v ariable visible in a message text Stopwatch TB, Ta, Lap, AQ Counter Up/down counter Cnt, On, Off Hours counter MI, Q, OT Threshold tri gger f a , On, Off, G_T Analog Analog threshold trig ger On, Off, A, B, Ax Analog dif ...

  • Siemens 6ED1050-1AA00-0BE8 - page 241

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 241 Editing message texts Only simple message text s can be edited from the LOGO! Basic. T ext messages created in LOGO!Soft Comfort that make use o f new features s uch as bar gra phs, I/O status names, and others can not be edited from the LOGO! Basi c. Also, yo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 242

    LOGO! functions 4.4 Special functions list - SF LOGO! 242 Manual, 04/2011, A5E03556174-01 Setting the Par parameter View in programming mode:     3DUDPHWHUDVVLJQPHQW VFUHHQIRUPIRU3DU Press to select a line for the mess age text. Press and to select the letter to be displayed in the text. To move the cursor fro ...

  • Siemens 6ED1050-1AA00-0BE8 - page 243

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 243 4.4.26 Softkey Short description This special function has the e ffect of a mechanical pushbutton or switch. Symbol in LOGO! Wiring Description Input En Output Q is set with a 0 to 1 transition of the signal at input En (Enable), and if 'Switch=O n' ...

  • Siemens 6ED1050-1AA00-0BE8 - page 244

    LOGO! functions 4.4 Special functions list - SF LOGO! 244 Manual, 04/2011, A5E03556174-01 Setting the Par parameter View in programming mode (example): 1. Select the 'Softkey' function. 2. Select input En and confirm with OK. The cursor is now po sitioned below 'Par'. 3. Change to the input mode of 'Par': Confi rm with ...

  • Siemens 6ED1050-1AA00-0BE8 - page 245

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 245 Let us assume you want to set 'Switch' (On). 1. Change to the editing mode: Confirm with OK (the cursor is now po sitioned on 'Off') 2. To change from 'Off' to 'On': Press or 3. Confirm your ent ries with P ress OK %? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 246

    LOGO! functions 4.4 Special functions list - SF LOGO! 246 Manual, 04/2011, A5E03556174-01 Functional description The function reads the value a t input In with a positive edge (0 to 1 transition) at input Trg (Trigger). If your LOGO! is a LOGO! 0BA6, th is value is applied to shift r egister bit S1 or S8, depending on the shifting direction: ● Sh ...

  • Siemens 6ED1050-1AA00-0BE8 - page 247

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 247 Timing diagram The timing diagram for the shift r egister in LOGO! 0BA6 is show n as follows: 6          6          6         ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 248

    LOGO! functions 4.4 Special functions list - SF LOGO! 248 Manual, 04/2011, A5E03556174-01 Setting the Par parameter (0BA7) View in programming mode (example): % WHLQGH[  %5 4 6 5HWHQWLYLW HQDEOHG <RXFDQVHOHFWDE WHLQGH[IURPWR <RX? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 249

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 249 Parameters V1...V4 The analog values for the paramet ers V1...V4 can be derived fro m another already- programmed function. You can use the actual values of the follo wing functions: ● Analog comparator (Page 218) (actual value Ax – Ay) ● Analog threshol ...

  • Siemens 6ED1050-1AA00-0BE8 - page 250

    LOGO! functions 4.4 Special functions list - SF LOGO! 250 Manual, 04/2011, A5E03556174-01 Timing diagram  9 9 9 9 6 6 (Q $4 Functional description If input En is set, then the function issues one of four possib le analog values V1 to V4 at the output AQ, depending on the value of S1 and S2. If the input En is not set, then the ...

  • Siemens 6ED1050-1AA00-0BE8 - page 251

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 251 4.4.29 Analog Ramp Short description The Analog Ramp instruction a llows the output to be changed fro m the current level to the selected level at a specified rate. Symbol in LOGO! Wiring Description Input En A change in the status from 0 to 1 at input En (Ena ...

  • Siemens 6ED1050-1AA00-0BE8 - page 252

    LOGO! functions 4.4 Special functions list - SF LOGO! 252 Manual, 04/2011, A5E03556174-01 Symbol in LOGO! Wiring Description Parameter Level 1 and Level 2: Levels to be reached Range of values for each level: -10,000 to +20,000 MaxL: Maximum value that must no t be exceeded under any circumstances. Range of values: -10,000 to +20,000 StSp: Start/St ...

  • Siemens 6ED1050-1AA00-0BE8 - page 253

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 253 Parameters L1, L2 The analog values for the paramet ers L1 and L2 can be derived f rom another already- programmed function. You can use the actual values of the follo wing functions: ● Analog comparator (Page 218) (actual value Ax – Ay) ● Analog thresho ...

  • Siemens 6ED1050-1AA00-0BE8 - page 254

    LOGO! functions 4.4 Special functions list - SF LOGO! 254 Manual, 04/2011, A5E03556174-01 Timing diagram for AQ 0D[/ 6W 6HO (Q $4 %   PV   PV   PV 6W6S% /HYHO /HYHO 5DWH 5DWH 5DWH 5DWH Functional description If the input En is set, then the f unction sets the current leve l to StSp + Offset "B ...

  • Siemens 6ED1050-1AA00-0BE8 - page 255

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 255 Setting the Par parameter View in programming mode (example): /ൺ% /  % S  %  $  % %? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 256

    LOGO! functions 4.4 Special functions list - SF LOGO! 256 Manual, 04/2011, A5E03556174-01 4.4.30 PI controller Short description Proportional-action and int egral -action controllers. You can us e both types of controller individually or combined. Symbol in LOGO! Wiring Description Input A/M Set the mode of the controller: 1: automatic mode 0: manu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 257

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 257 Symbol in LOGO! Wiring Description Output AQ T his special function has an analog output (= manipulated variable). This output can only be connected with the analog input of a function, an analog flag or an anal og output connector (AQ1, AQ2). Range of values ...

  • Siemens 6ED1050-1AA00-0BE8 - page 258

    LOGO! functions 4.4 Special functions list - SF LOGO! 258 Manual, 04/2011, A5E03556174-01 Select the required function by the block numb er. For informati on on parameter defaults, refer to the On-delay (Page 160) topi c. Parameters KC, TI Please note: ● If parameter KC has value 0, the "P" function (proportional con trol) will not be e ...

  • Siemens 6ED1050-1AA00-0BE8 - page 259

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 259 Functional description If the input A/M is set to 0, then t he special function issues output AQ with the value that you set with parameter Mq. If the input A/M is set to 1, then automatic mode commences. As an integral sum the value Mq is adopted, the control ...

  • Siemens 6ED1050-1AA00-0BE8 - page 260

    LOGO! functions 4.4 Special functions list - SF LOGO! 260 Manual, 04/2011, A5E03556174-01 Setting the Par parameter View in programming mode (example): 63ൺ% % S  %  $  % 0Tൺ% %? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 261

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 261 4.4.31 Pulse Width Modulator (PWM) Short description The Pulse Width Modulator (PWM) i nstruction modulates the analo g input value Ax to a pulsed digital output signal. The pulse wi dth is proportional t o the analog value Ax. Symbol in LOGO! Wiring Descripti ...

  • Siemens 6ED1050-1AA00-0BE8 - page 262

    LOGO! functions 4.4 Special functions list - SF LOGO! 262 Manual, 04/2011, A5E03556174-01 If your LOGO! is a LOGO! 0BA7, you can additionally use the actual v alues of the following functions: ● Analog filter (0BA7 only) (Page 271) (actual value AQ) ● Average value (0BA7 only) (Page 276) (actual value AQ) ● Max/Min (0BA7 only) (Page 273) (act ...

  • Siemens 6ED1050-1AA00-0BE8 - page 263

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 263 Examples with Timing Diagrams The following examples show how the PWM instructio n modulates a digital output signal from the analog input value: Example 1 Analog input value: 500 (range 0 ...1000) Periodic time T: 4 seconds The digital output of the PWM fu nc ...

  • Siemens 6ED1050-1AA00-0BE8 - page 264

    LOGO! functions 4.4 Special functions list - SF LOGO! 264 Manual, 04/2011, A5E03556174-01 Setting the Par Parameter The following illustration sh ows the view in programmi ng mode that corresponds to the first example: S  7 V %  % $  %? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 265

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 265 4.4.32 Mathematic instruction Short description The mathematic instruction block calculates the value AQ of an equation formed from the user-defined operand s and operators. Symbol in LOGO! Wiring Description Input En A change in the status from 0 to 1 at inpu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 266

    LOGO! functions 4.4 Special functions list - SF LOGO! 266 Manual, 04/2011, A5E03556174-01 If your LOGO! is a LOGO! 0BA7, you can additionally use the actual v alues of the following functions: ● Analog filter (0BA7 only) (Page 271) (actual value AQ) ● Average value (0BA7 only) (Page 276) (actual value AQ) ● Max/Min (0BA7 only) (Page 273) (act ...

  • Siemens 6ED1050-1AA00-0BE8 - page 267

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 267 Functional Description The mathematic instruction func tion combines the four ope rands and three operato rs to form an equation. The operator can be any one of the four standard o perators: +, - , *, or /. For each operator, you must set a unique priority of ...

  • Siemens 6ED1050-1AA00-0BE8 - page 268

    LOGO! functions 4.4 Special functions list - SF LOGO! 268 Manual, 04/2011, A5E03556174-01 Setting the Par parameter The following illustration sh ows the view in programmi ng mode that corresponds to the first example (12 + (6 / 3)) - 1: 35 0 23  9  % 35 + 23  9  ...

  • Siemens 6ED1050-1AA00-0BE8 - page 269

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 269 Parameter MathBN The value for the MathBN param et er references the block number of an alread y- programmed mathemati c instruction function block. Functional description The mathematic instruction err or detecti on block sets the outpu t when the referenced ...

  • Siemens 6ED1050-1AA00-0BE8 - page 270

    LOGO! functions 4.4 Special functions list - SF LOGO! 270 Manual, 04/2011, A5E03556174-01 Setting the Par parameter The parameters MathBN, AutoRs t, and Err can be set in programmi ng mode or parameter assignment mode. View in programming mode (example): % (UU ='2) $XWR5VW 1 0DWK%1 % %ORFNQXPEHU? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 271

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 271 4.4.34 Analog filter (0BA7 only) Short Description The analog filter function smoot hs the analog input signal. Symbol in LOGO! Wiring Description Ax Input Ax is the analog inpu t signal to be smoothed. Input Ax is one of the following analog signal s: • AI1 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 272

    LOGO! functions 4.4 Special functions list - SF LOGO! 272 Manual, 04/2011, A5E03556174-01 Functional description The function fetches the analog signal at input Ax based on the set number of samples (Sn) and outputs the average value. Note There are a maximum of eight analog filter function blocks avai lable for use in the circuit program in LOGO! ...

  • Siemens 6ED1050-1AA00-0BE8 - page 273

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 273 4.4.35 Max/Min (0BA7 only) Short description The Max/Min function records the maximum or minim um value of Ax . Symbol in LOGO! Wiring Description En A signal at input En (Enabl e) outputs an analog value to AQ, depending on the settings of paramet ers ERst an ...

  • Siemens 6ED1050-1AA00-0BE8 - page 274

    LOGO! functions 4.4 Special functions list - SF LOGO! 274 Manual, 04/2011, A5E03556174-01 Parameter Mode The value for parameter M ode can be provided by the actual valu e of another alread y- programmed function. You can use the actual values of the follo wing functions: ● Analog comparator (Page 218) (actual value Ax – Ay) ● Analog threshol ...

  • Siemens 6ED1050-1AA00-0BE8 - page 275

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 275 Timing diagram (example) $[ 0RGH $ 4 6 (Q                       ,I(5V W   Functional description ERst = 1 a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 276

    LOGO! functions 4.4 Special functions list - SF LOGO! 276 Manual, 04/2011, A5E03556174-01 4.4.36 Average value (0BA7 only) Short description The average value function calcula tes the average value of an a nalog input over a configured time period. Symbol in LOGO! Wiring Description En A change in status from 0 to 1 transition at input En starts th ...

  • Siemens 6ED1050-1AA00-0BE8 - page 277

    LOGO! functions 4.4 Special functions list - SF LOGO! Manual, 04/2011, A5E03556174-01 277 Timing diagram (example) $[ 6Q 6Q  6W   V 6W   V 6Q  $ 4 (Q 5            Functional description This function fetches the analog in put signal according to both the set sampling time St and the ...

  • Siemens 6ED1050-1AA00-0BE8 - page 278

    LOGO! functions 4.4 Special functions list - SF LOGO! 278 Manual, 04/2011, A5E03556174-01 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 279

    LOGO! Manual, 04/2011, A5E03556174-01 279 UDF (User-Defined Function) (0BA7 only) 5 User-Defined Function (UDF) LOGO!Soft Comfort V7.0 provides y ou with a new option for creat ing circuit programs - the UDF (User-Defined Function) editor. You can save circuit progra ms created in the UDF editor as individual UDF blocks fo r use in a circuit progra ...

  • Siemens 6ED1050-1AA00-0BE8 - page 280

    UDF (User-Defined Function) (0BA7 only) LOGO! 280 Manual, 04/2011, A5E03556174-01 Editing elements to the inputs of a UDF block: 1. Switch LOGO! to programming mode. ႣႭ  6WDUW !1HWZRUN 'LDJQRVWLF 6HWXS &DUG !3URJUDP 2. Select " ① " on the main menu: Press or 3. Confirm &quo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 281

    UDF (User-Defined Function) (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 281 8. Press until LOGO! steps into the s cre en form for the first UDF bloc k U01.   8    4 , 3DU 9. Press to move the cursor to " ④ ", then press OK . The cursor appears in a fla shing solid square. Note that "1" in posit ...

  • Siemens 6ED1050-1AA00-0BE8 - page 282

    UDF (User-Defined Function) (0BA7 only) LOGO! 282 Manual, 04/2011, A5E03556174-01 Editing elements to the outputs of a UDF block: If LOGO! shows the following screen form as shown in step 10 ab ov e and you want to change the element connected to "1" wh ere "1" indicates the fir st output of the UDF block U01 that is connected t ...

  • Siemens 6ED1050-1AA00-0BE8 - page 283

    UDF (User-Defined Function) (0BA7 only) LOGO! Manual, 04/2011, A5E03556174-01 283 Setting the Par parameter You can edit the Par parameter for your UDF block i f you configured parameters for this UDF using LOGO!Soft Comfort; other wise, you cannot edit parameters for UDF blocks. In this case, the UDF block display shows no " Par ": 8? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 284

    UDF (User-Defined Function) (0BA7 only) LOGO! 284 Manual, 04/2011, A5E03556174-01 4. Press to see the final view:  8 $  %  You can also edit UDF parameter s ettings in parameter assignmen t mode in the same way as you do in programming mode. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 285

    LOGO! Manual, 04/2011, A5E03556174-01 285 Data Log (0BA7 only) 6 You can configure a maxim um of one Data Log for your circuit pr ogram using LOGO!Soft Comfort. The Data Log is used to r ec ord process measurement var iables of the selected function blocks. You can add the Data Log instruction to your c ircuit program as you do with a function bloc ...

  • Siemens 6ED1050-1AA00-0BE8 - page 286

    Data Log (0BA7 only) LOGO! 286 Manual, 04/2011, A5E03556174-01 3. You can see that a flag M1 is connected to the Data Log block L 1. Press OK or to move the cursor to "M" in "M1". Press OK . LOGO! s hows the following display:   ൺ &R/ 4. You can select a different ele ment from available list s and ...

  • Siemens 6ED1050-1AA00-0BE8 - page 287

    LOGO! Manual, 04/2011, A5E03556174-01 287 Configuring LOGO! 7 Parameter assignment refers to t he configuration of the block p arameters. You can set delay times for time functions, the sw itching times of timers, counte r threshold values, the monitoring interval of an hours counter, the on and off thresho lds of the trigger, and more. You can con ...

  • Siemens 6ED1050-1AA00-0BE8 - page 288

    Configuring LOGO! 7.1 Selecting parameter assignm ent mode LOGO! 288 Manual, 04/2011, A5E03556174-01 7.1 Selecting parameter assignment mode Press ESC to change from RUN to parameter a ssignment mode:  0R (6& 3 UH V V Note The following applies to earlier device versi ons up to 0BA2: yo u ...

  • Siemens 6ED1050-1AA00-0BE8 - page 289

    Configurin g LOGO! 7.1 Selecting parameter assignm ent mode LOGO! Manual, 04/2011, A5E03556174-01 289 LOGO! shows the main menu of the programming mode: LOGO! 0BA6 main menu 6WDUW 6HWXS &DUG !3URJUDP LOGO! 0BA7 main menu ႣႭ 6WDUW !1HWZRUN 'LDJQRVWLF 6HWXS &DUG !3U ...

  • Siemens 6ED1050-1AA00-0BE8 - page 290

    Configuring LOGO! 7.1 Selecting parameter assignm ent mode LOGO! 290 Manual, 04/2011, A5E03556174-01 7.1.1 Parameters Note The following discourse on param eters assumes that the respecti ve default parameter mode ("+") has been maintained. This is a prerequi site for viewing a nd editing paramet ers in the parameter assignment mode! See ...

  • Siemens 6ED1050-1AA00-0BE8 - page 291

    Configurin g LOGO! 7.1 Selecting parameter assignm ent mode LOGO! Manual, 04/2011, A5E03556174-01 291 7.1.2 Selecting the parameters To select a parameter: 1. On the parameter assignment menu, sel ect ' Set Param ': Press or 3UJ1DPH 6HW !6HW3DUDP 6WRS 2. Confirm with OK . LOGO! shows the first parameter . If no parame ...

  • Siemens 6ED1050-1AA00-0BE8 - page 292

    Configuring LOGO! 7.1 Selecting parameter assignm ent mode LOGO! 292 Manual, 04/2011, A5E03556174-01 7.1.3 Modifying parameters You first select the parameter you want t o edit (Page 291). You change the value of the param eter in the same way as you di d in programming mode: 1. Move the cursor to the point at which you want to make the chan ge: Pr ...

  • Siemens 6ED1050-1AA00-0BE8 - page 293

    Configurin g LOGO! 7.1 Selecting parameter assignm ent mode LOGO! Manual, 04/2011, A5E03556174-01 293 Current value of a counter View of a counter parameter in paramet er assignment mode: &QW  2II  2Q  % &QW  2IIൺ% 2Q  % RU FXUUH ...

  • Siemens 6ED1050-1AA00-0BE8 - page 294

    Configuring LOGO! 7.2 Setting the default values for LOGO! LOGO! 294 Manual, 04/2011, A5E03556174-01 7.2 Setting the default values for LOGO! You can set the following default values for a LOGO! Basic: Clock settings You can set the default values for time-of-day and dat e (Page 295) , summertime/wintertime conversion (P age 111) and syn chronizati ...

  • Siemens 6ED1050-1AA00-0BE8 - page 295

    Configurin g LOGO! 7.2 Setting the default values for LOGO! LOGO! Manual, 04/2011, A5E03556174-01 295 7.2.1 Setting the time of day and date (LOGO! ... C) You can set the time of day and the date ● in parameter assignment mode by m eans of the set menu ("Clock" menu item) ● in programming mode by means of t he setup menu ("Clock& ...

  • Siemens 6ED1050-1AA00-0BE8 - page 296

    Configuring LOGO! 7.2 Setting the default values for LOGO! LOGO! 296 Manual, 04/2011, A5E03556174-01 To set the time of day and the date in programming mode: If you want to set the time of day and the date in programming mode, select ' Setup ' in the main menu, then menus ' Clock ' and ' Set Clock '. You can now set th ...

  • Siemens 6ED1050-1AA00-0BE8 - page 297

    Configurin g LOGO! 7.2 Setting the default values for LOGO! LOGO! Manual, 04/2011, A5E03556174-01 297 To set the backlight choice in programming mode: You can set the default value for the backlight in programming mode only. 1. In the main menu, select " ① " : Press or  6WDUW !6HWXS &DUG 3URJUDP 2. C ...

  • Siemens 6ED1050-1AA00-0BE8 - page 298

    Configuring LOGO! 7.2 Setting the default values for LOGO! LOGO! 298 Manual, 04/2011, A5E03556174-01 7.2.3 Setting the menu language The language of the LOGO! menus can be one of ten predefined la nguages: CN (Chinese) DE (German) EN (Engl ish) ES (Spanish) FR (French) IT (Italian) NL (Dutch) RU (Ru ssian) TR (Turkish) JP (Japanese) To set the menu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 299

    Configurin g LOGO! 7.2 Setting the default values for LOGO! LOGO! Manual, 04/2011, A5E03556174-01 299 7.2.4 Setting the number of AI s in the LOGO! Basic LOGO! 12/24RC/RCo/RCE, LOGO! 24/ 24o and LOGO! 24C/24Co support up to four onboard inputs that can b e used as either digital or analog inp uts (0 ...10V). Inputs I7 (AI1) and I8 (AI2) are availab ...

  • Siemens 6ED1050-1AA00-0BE8 - page 300

    Configuring LOGO! 7.2 Setting the default values for LOGO! LOGO! 300 Manual, 04/2011, A5E03556174-01 7.2.5 Setting the start screen You can select the default setting for the start screen that LO GO! and the LOGO! TD will display in RUN mode. You make th is selection from LOGO! in para meter assignment mode. To select the start screen: 1. Select pa ...

  • Siemens 6ED1050-1AA00-0BE8 - page 301

    Configurin g LOGO! 7.2 Setting the default values for LOGO! LOGO! Manual, 04/2011, A5E03556174-01 301 LOGO! displays you r selection. Power the LOGO! Basic off then on to make your c hanges take eff ect. When LOGO! is in RUN mode, both LOGO! and the LOGO ! TD will display the start sc reen that you selected. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 302

    Configuring LOGO! 7.2 Setting the default values for LOGO! LOGO! 302 Manual, 04/2011, A5E03556174-01 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 303

    LOGO! Manual, 04/2011, A5E03556174-01 303 Applicable cards 8 LOGO! 0BA6 provides the following ca rds for program storage and real-time clock ba ckup: ● LOGO! Memory Card ● LOGO! Battery Card ● LOGO! Memory/Battery Card Each of the three cards is color-coded to make them easily dist inguishable from one anoth er. They also vary in si ze. The ...

  • Siemens 6ED1050-1AA00-0BE8 - page 304

    Applicable cards LOGO! 304 Manual, 04/2011, A5E03556174-01 Note You do not need a memory card or com bined me mory/battery card to backup t he circuit program in your LOGO! The LOGO! circuit program is automatically sto red in nonvolatil e memory when you exit the programming mode. You can backup the LOGO! circuit p rogram on a memory card, a co mb ...

  • Siemens 6ED1050-1AA00-0BE8 - page 305

    Applicable cards 8.1 Security function (CopyProtect) LOGO! Manual, 04/2011, A5E03556174-01 305 8.1 Security function (CopyProtect) The security functio n provides c opy protection for circuit prog rams on memory card s, combined memory/battery cards or SD c ards. Unprotected cards You can edit circuit programs without restrictions and exchange data ...

  • Siemens 6ED1050-1AA00-0BE8 - page 306

    Applicable cards 8.1 Security function (CopyProtect) LOGO! 306 Manual, 04/2011, A5E03556174-01 Assigning a security function To assign a circuit program and co py protection function to the card, open the programming mode and select "Card". 1. Switch LOGO! to program ming mode (ESC / >Stop). 2. Select the ' Card ' command: Pr ...

  • Siemens 6ED1050-1AA00-0BE8 - page 307

    Applicable cards 8.2 Inserting and removing the card fro m LOGO! LOGO! Manual, 04/2011, A5E03556174-01 307 8.2 Inserting and removing the card from LOGO! When you remove a LOGO! memory ca rd, a combined memory/battery card, or an SD card that contains a circuit program w ith copy protection attributes , note the following: The circuit program store ...

  • Siemens 6ED1050-1AA00-0BE8 - page 308

    Applicable cards 8.2 Inserting and removing the card fro m LOGO! LOGO! 308 Manual, 04/2011, A5E03556174-01 To remove a battery card, or co mbined memory/battery card, slid e a screwdriver with a 3- mm blade into the slot on the upp er surface of the card until it engages in the back, then with the screwdriver engaged, pull the ca rd out with your h ...

  • Siemens 6ED1050-1AA00-0BE8 - page 309

    Applicable cards 8.3 Copying data from LOGO! to the card LOGO! Manual, 04/2011, A5E03556174-01 309 8.3 Copying data from LOGO! to the card Copying data from LOGO! to the card manually To manually copy the circuit prog ram to the memory card, combin ed battery/memory card, or the SD card, follow these steps: 1. Insert the card into the slot. 2. Swit ...

  • Siemens 6ED1050-1AA00-0BE8 - page 310

    Applicable cards 8.3 Copying data from LOGO! to the card LOGO! 310 Manual, 04/2011, A5E03556174-01 Copying data from LOGO! 0BA7 to the SD card automatically LOGO!Soft Comfort V7.0 provides an option for automatically cop ying the circuit program to the SD card when transferring the circuit program to LOGO! 0BA7 . This option is available in the dia ...

  • Siemens 6ED1050-1AA00-0BE8 - page 311

    Applicable cards 8.4 Copying data from the card to LOGO! LOGO! Manual, 04/2011, A5E03556174-01 311 8.4 Copying data from the card to LOGO! You can copy a circuit prog ram from a compatible memory ca rd, combined memory/battery card, or an SD card to LOGO! in one of the following ways: ● Automatically during the startup of LOG O! (POWER ON) ● By ...

  • Siemens 6ED1050-1AA00-0BE8 - page 312

    Applicable cards 8.4 Copying data from the card to LOG O! LOGO! 312 Manual, 04/2011, A5E03556174-01 Copying by means of the "Card" menu For information on the replacem ent of a memory card, combined m emory/battery card, or an SD card, also note the information in the topic " Inserting and removing the card from LOG O! (Page 307)&quo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 313

    LOGO! Manual, 04/2011, A5E03556174-01 313 LOGO! software 9 9.1 LOGO! software LOGO!Soft Comfort is available as a programming package for the PC. This software provides many features, for ex ample: ● A graphic interface for offline creation of your circuit progra m by me ans of Ladder Diagram (contact chart / circ uit d iagram) or Function Block ...

  • Siemens 6ED1050-1AA00-0BE8 - page 314

    LOGO! software 9.1 LOGO! software LOGO! 314 Manual, 04/2011, A5E03556174-01 The LOGO! alternatives As you can see, LOGO!Soft Comfort r epresents an alternative to conventional engineering methods, with several advantages: ● You can develop the circuit prog ram on your PC. ● You simulate the circuit program on your compute r and verify it s func ...

  • Siemens 6ED1050-1AA00-0BE8 - page 315

    LOGO! software 9.2 Connecting LOGO! to a PC LOGO! Manual, 04/2011, A5E03556174-01 315 9.2 Connecting LOGO! to a PC Connecting the PC cable (for LOGO! 0BA6 only) To connect LOGO! to a PC, you need the LOGO! PC cable. See the Appendix " Order numbers (Page 363)". Turn the power off to the LOGO! Bas e Module. Remove the cap, me mory card, or ...

  • Siemens 6ED1050-1AA00-0BE8 - page 316

    LOGO! software 9.2 Connecting LOGO! to a PC LOGO! 316 Manual, 04/2011, A5E03556174-01 Note You can swit ch earlier ver sions up to 0BA3 with/without display to PC ↔ LOGO mode as follows: 1. Switch off the power supply to LOGO!. 2. Remove the cover o r the memory, battery, or combi ned memory/bat tery card and connect the cable to this socket. 3. ...

  • Siemens 6ED1050-1AA00-0BE8 - page 317

    LOGO! Manual, 04/2011, A5E03556174-01 317 Applications 10 Note LOGO! sample applications are a vailable to all our customers fr ee of charge on the Siemen s LOGO! website ( http://www.siemens.com/logo ) (go to Products & Solutions → Applications → Application Examples). The examples provided are no t guaranteed to be error-free; they serve ...

  • Siemens 6ED1050-1AA00-0BE8 - page 318

    Applications LOGO! 318 Manual, 04/2011, A5E03556174-01 On the Web you can also find de scriptions and the co rresponding circuit diagrams of the applications. You can read these *.pdf files with the Adobe Acr obat Reader. If you have installed LOGO!Soft Comfort on your computer, you can simply c l ick the disk icon to download the relevant circuit ...

  • Siemens 6ED1050-1AA00-0BE8 - page 319

    LOGO! Manual, 04/2011, A5E03556174-01 319 Technical data A A.1 General technical data Criterion Tested in accord ance with Values LOGO! Base Modules (0BA6) ( LOGO! Basic or LOGO! Pure ) Dimensions (WxHxD) Weight Installation LOGO! Base Modules (0BA7) ( LOGO! Basic ) Dimensions (WxHxD) Weight Installation 72 x 90 x 55 mm Approx. 190 g on a 35 mm pro ...

  • Siemens 6ED1050-1AA00-0BE8 - page 320

    Technical data A.1 General technical data LOGO! 320 Manual, 04/2011, A5E03556174-01 Criterion Tested in accord ance with Values Ambient mechanic al conditions Degree of protection IP 20 for LOGO! Base Modules, expansion modules, and the LOGO! TD excluding the TD front panel IP 65 for LOGO! TD front panel Vibrations: IEC 60068-2-6 5 ... 8.4 Hz (cons ...

  • Siemens 6ED1050-1AA00-0BE8 - page 321

    Technical data A.2 Technical data: LOGO! 230... LOGO! Manual, 04/2011, A5E03556174-01 321 A.2 Technical data: LOGO! 230... LOGO! 230RC LOGO! 230RCo LOGO! 230RCE Power supply Input voltage 115 ... 240 V AC/DC 115 ... 240 V AC/DC Permissible range 85 ... 265 V AC 100 ... 253 V DC 85 ... 265 V AC 100 ... 253 V DC Permissible mains frequenc y 47 ... 63 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 322

    Technical data A.2 Technical data: LOGO! 230... LOGO! 322 Manual, 04/2011, A5E03556174-01 LOGO! 230RC LOGO! 230RCo LOGO! 230RCE Input current at • Signal 0 • Signal 1 • Signal 0 • Signal 1 • < 0.03 mA AC • > 0.08 mA AC • < 0.03 mA DC • > 0.12 mA DC • < 0.03 mA AC • > 0.08 mA AC • < 0.03 mA DC • > 0.12 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 323

    Technical data A.2 Technical data: LOGO! 230... LOGO! Manual, 04/2011, A5E03556174-01 323 LOGO! 230RC LOGO! 230RCo LOGO! 230RCE Protection of output relay (if desired) max. 16 A, characteristic B16 max. 16 A, characteristic B16 Switching rate Mechanical 10 Hz 10 Hz Ohmic load/lamp load 2 Hz 2 Hz Inductive load 0.5 Hz 0.5 Hz Notice: For fluorescent ...

  • Siemens 6ED1050-1AA00-0BE8 - page 324

    Technical data A.3 Technical data: LOGO! DM8 230R and LOGO! DM16 230R LOGO! 324 Manual, 04/2011, A5E03556174-01 A.3 Technical data: LOGO! DM8 230R and LOGO! DM16 230R LOGO! DM8 230R L OGO! DM16 230R Power supply Input voltage 115...240 V AC/DC 115 ... 240 V AC/DC Permissible range 85 ... 265 V AC 100 ... 253 V DC 85 ... 265 V AC 100 ... 253 V DC Pe ...

  • Siemens 6ED1050-1AA00-0BE8 - page 325

    Technical data A.3 Technical data: LOGO! DM8 230R and LOGO! DM16 230R LOGO! Manual, 04/2011, A5E03556174-01 325 LOGO! DM8 230R L OGO! DM16 230R Delay time at 0 to 1: • 120V AC • 240 V AC • 120 V DC • 240V DC Delay time at 1 to 0: • 120V AC • 240 V AC • 120 V DC • 240V DC • typ. 50 ms • typ. 30 ms • typ. 25 ms • typ. 15 ms ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 326

    Technical data A.4 Technical data: LOGO! 24... LOGO! 326 Manual, 04/2011, A5E03556174-01 Notice: For fluorescent lamps wit h capacitors , the technical da ta of fluorescent lamp ballasts must also be considered. If the ma ximum allowed surge current i s exceeded, fluorescent lamps must be switche d with appropriate conta ctor relays. The data was d ...

  • Siemens 6ED1050-1AA00-0BE8 - page 327

    Technical data A.4 Technical data: LOGO! 24... LOGO! Manual, 04/2011, A5E03556174-01 327 LOGO! 24 LOGO! 24o LOGO! 24C LOGO! 24Co Delay time at 0 to 1 1 to 0 typ. 1.5 ms <1.0 ms (I3 ... I6) typ. 1.5 ms <1.0 ms (I3 ... I6) typ. 1.5 ms <1.0 ms (I3 ... I6) typ. 1.5 ms <1.0 ms (I3 ... I6) Line length (unshielde d) max. 100 m max. 100 m Analo ...

  • Siemens 6ED1050-1AA00-0BE8 - page 328

    Technical data A.5 Technical data: LOGO! DM8 24 and LOGO! DM16 24 LOGO! 328 Manual, 04/2011, A5E03556174-01 LOGO! 24 LOGO! 24o LOGO! 24C LOGO! 24Co Ohmic load/lamp load 10 Hz 10 Hz Inductive load 0.5 Hz 0.5 Hz 1) When LOGO! 24/24o, LOGO! 24C/24Co, LOGO! DM8 24 or LOGO! DM16 24 are switched on, signal 1 is sent to the digital outputs for about 50 μ ...

  • Siemens 6ED1050-1AA00-0BE8 - page 329

    Technical data A.5 Technical data: LOGO! DM8 24 and LOGO! DM16 24 LOGO! Manual, 04/2011, A5E03556174-01 329 LOGO! DM8 24 LOGO! DM16 24 Number 4 8 Output type Transistor, current-sourcing 1) Transistor, current-sourcing (1) Electrical isolation No No In groups of - - - - Control of a digital input Yes Yes Output voltage ≤ Supply voltage ≤ Supply ...

  • Siemens 6ED1050-1AA00-0BE8 - page 330

    Technical data A.6 Technical data: LOGO! 24RC... LOGO! 330 Manual, 04/2011, A5E03556174-01 A.6 Technical data: LOGO! 24RC... LOGO! 24RC LOGO! 24RCo Power supply Input voltage 24 V AC/DC Permissible range 20.4 ... 26.4 V AC 20.4 ... 28.8 V DC Reverse polarity protection - - Permissible mains fr equency 47 ... 63 Hz Power consumption • 24 V AC • ...

  • Siemens 6ED1050-1AA00-0BE8 - page 331

    Technical data A.6 Technical data: LOGO! 24RC... LOGO! Manual, 04/2011, A5E03556174-01 331 LOGO! 24RC LOGO! 24RCo Range - - max. Input voltage - - Digital ou tputs Number 4 Output type Relay outputs Electrical isolation Yes In groups of 1 Control of a digital input Yes Continuous current I th max. 10 A per relay Surge current max. 30 A Incandescent ...

  • Siemens 6ED1050-1AA00-0BE8 - page 332

    Technical data A.7 Technical data: LOGO! DM8 24R and LOGO! DM16 24R LOGO! 332 Manual, 04/2011, A5E03556174-01 A.7 Technical data: LOGO! DM8 24R and LOGO! DM16 24R LOGO! DM8 24R LOGO! DM16 24R Power supply Input voltage 24 V AC/DC 24 V DC Permissible range 20.4 ... 26.4 V AC 20.4 ... 28.8 V DC 20.4 ... 28.8 V DC Reverse polarity protection - - - - P ...

  • Siemens 6ED1050-1AA00-0BE8 - page 333

    Technical data A.7 Technical data: LOGO! DM8 24R and LOGO! DM16 24R LOGO! Manual, 04/2011, A5E03556174-01 333 LOGO! DM8 24R LOGO! DM16 24R Continuous current I th max. 5 A per relay max. 5 A per relay Surge current max. 30 A max. 30 A Incandescent lamp load (25000 switching cycles) at 1000 W 1000 W Fluorescent tubes with ballast (25000 switch ing c ...

  • Siemens 6ED1050-1AA00-0BE8 - page 334

    Technical data A.8 Technical data: LOGO! 12/24... LOGO! DM8 12/24R LOGO! 334 Manual, 04/2011, A5E03556174-01 A.8 Technical data: LOGO! 12/24... LOGO! DM8 12/24R LOGO! 12/24RC LOGO! 12/24RCo LOGO! 12/24RCE LOGO! DM8 12/24R Power supply Input voltage 12/24 V DC 12/24 V DC Permissible range 10.8 ... 28.8 V DC 10.8 ... 28.8 V DC Reverse polarity protec ...

  • Siemens 6ED1050-1AA00-0BE8 - page 335

    Technical data A.8 Technical data: LOGO! 12/24... LOGO! DM8 12/24R LOGO! Manual, 04/2011, A5E03556174-01 335 LOGO! 12/24RC LOGO! 12/24RCo LOGO! 12/24RCE LOGO! DM8 12/24R Input current at • Signal 0 • Signal 1 < 0.85 mA (I3...I6) < 0.05 mA (I1, I2, I7, I8) > 1.5 mA (I3... I6) > 0.1 mA (I1, I2, I7, I8) < 0.85 mA > 1.5 mA Delay t ...

  • Siemens 6ED1050-1AA00-0BE8 - page 336

    Technical data A.8 Technical data: LOGO! 12/24... LOGO! DM8 12/24R LOGO! 336 Manual, 04/2011, A5E03556174-01 LOGO! 12/24RC LOGO! 12/24RCo LOGO! 12/24RCE LOGO! DM8 12/24R Short circuit-proof cos 0.5 to 0.7 Power protection B16, 900A Power pr otection B16, 900A Parallel output circuits for power increase Not permitted Not permitted Protection of outp ...

  • Siemens 6ED1050-1AA00-0BE8 - page 337

    Technical data A.9 Switching capacity/servi ce life of the relay outputs LOGO! Manual, 04/2011, A5E03556174-01 337 A.9 Switching capacity/service life of the relay outputs Switching capacity and service life of the contacts with ohmic loading (heating): 6ZLWFKLQJF FOHVPLOOLRQ 6ZLWFKHGFXUUHQW$     ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 338

    Technical data A.10 Technical data: LOGO! AM2 LOGO! 338 Manual, 04/2011, A5E03556174-01 A.10 Technical data: LOGO! AM2 LOGO! AM2 Power supply Input voltage 12/24 V DC Permissible range 10.8 ... 28.8 V DC Power consumpt ion 25 ... 50 mA Voltage failure bu ffering typ. 5 ms Power loss at • 12 V • 24 V • 0.3 ... 0.6 W • 0.6 ... 1.2 W Electrica ...

  • Siemens 6ED1050-1AA00-0BE8 - page 339

    Technical data A.11 Technical data: LOGO! AM2 PT100 LOGO! Manual, 04/2011, A5E03556174-01 339 A.11 Technical data: LOGO! AM2 PT100 LOGO! AM2 PT100 Power supply Input voltage 12/24 V DC Permissible range 10.8 ... 28.8 V DC Power consumpt ion 25 ... 50 mA Voltage failure bu ffering typ. 5 ms Power loss at • 12 V • 24 V • 0.3 ... 0.6 W • 0.6 . ...

  • Siemens 6ED1050-1AA00-0BE8 - page 340

    Technical data A.12 Technical data: LOGO! AM2 RTD LOGO! 340 Manual, 04/2011, A5E03556174-01 A.12 Technical data: LOGO! AM2 RTD LOGO! AM2 RTD Power supply Input voltage 12/24 V DC Permissible range 10.8 ... 28.8 V DC Power consumpt ion 30 ... 40 mA Voltage failure bu ffering typ. 5 ms Power loss at • 12 V • 24 V • 0.36 ... 0.48 W • 0.72 ... ...

  • Siemens 6ED1050-1AA00-0BE8 - page 341

    Technical data A.13 Technical data: LOGO! AM2 AQ LOGO! Manual, 04/2011, A5E03556174-01 341 LOGO! AM2 RTD Cable length (shielde d) max. 10 m Interference frequency suppression 55 Hz A.13 Technical data: LOGO! AM2 AQ LOGO! AM2 AQ Power supply Input voltage 24 V DC Permissible range 20.4 ... 28.8 V DC Power consumpt ion 35 ...90 mA Voltage failure bu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 342

    Technical data A.14 Technical data: CM EIB/KNX LOGO! 342 Manual, 04/2011, A5E03556174-01 A.14 Technical data: CM EIB/KNX CM EIB/KNX Mechanical data Dimensions (WxHxD) Weight Installation 36 x 90 x 55 mm Approx. 107 g on a 35 mm profile rail 2 module widths or wall mounting, must be mounted a s the last modu le on the right of LOGO! Power supply Inp ...

  • Siemens 6ED1050-1AA00-0BE8 - page 343

    Technical data A.15 Technical data: CM AS Interface LOGO! Manual, 04/2011, A5E03556174-01 343 A.15 Technical data: CM AS Interface CM AS Interface Mechanical data Dimensions (WxHxD) Weight Installation 36 x 90 x 58 mm Approx. 90 g on a 35 mm profile rail 2 module widths or wall mounting, must be mounted a s the last modu le on the right of LOGO! Po ...

  • Siemens 6ED1050-1AA00-0BE8 - page 344

    Technical data A.16 Technical data: LOGO!Power 12 V LOGO! 344 Manual, 04/2011, A5E03556174-01 A.16 Technical data: LOGO!Power 12 V LOGO! Power 12 V is a primary-s witched power supply unit for LO GO! devices. Two current ranges are available. LOGO! Power 12 V / 1.9 A LOGO! Power 12 V / 4.5 A Input data Input voltage 100 ... 240 V AC Permissible ran ...

  • Siemens 6ED1050-1AA00-0BE8 - page 345

    Technical data A.17 Technical data: LOGO!Power 24 V LOGO! Manual, 04/2011, A5E03556174-01 345 A.17 Technical data: LOGO!Power 24 V LOGO! Power 24 V is a primary-s witched power supply module for LOGO! devices. Two current ranges are available. LOGO! Power 24 V / 1.3 A LOGO! Power 24 V / 2.5 A Input data Input voltage 100 ... 240 V AC Permissible ra ...

  • Siemens 6ED1050-1AA00-0BE8 - page 346

    Technical data A.18 Technical data: LOGO! Contact 24/230 LOGO! 346 Manual, 04/2011, A5E03556174-01 LOGO! Power 24 V / 1.3 A LOGO! Power 24 V / 2.5 A Installation On 35 mm DIN rail, snap-on Dimensions in mm (WxHxD) 54 x 80 x 55 72 x 90 x 55 Approx. weight 0.2 kg 0.3 kg A.18 Technical data: LOGO! Contact 24/230 LOGO! Contact 24 and LOGO! Contact 230 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 347

    Technical data A.19 Technical data: LOGO! TD (Text Display) LOGO! Manual, 04/2011, A5E03556174-01 347 A.19 Technical data: LOGO! TD (Text Display) LOGO! TD Mechanical data Dimensions (WxHxD) Weight Installation Keyboard Display 128.2 x 86 x 38.7 mm Approx. 220 g Bracket mounting Membrane keypad with 10 keys FSTN-Graphic Display with 12 8 x 64 (colu ...

  • Siemens 6ED1050-1AA00-0BE8 - page 348

    Technical data A.20 Technical data: Battery inf ormation for LOGO! battery card s LOGO! 348 Manual, 04/2011, A5E03556174-01 A.20 Technical data: Battery information for LOGO! battery cards Battery information fo r LOGO! Battery cards Manufactur er Panasonic Type BR1220/1VCE Voltage 3 V Capacity 35mAh Mechanical data Dimensions Weight 12.5mm x 1.6mm ...

  • Siemens 6ED1050-1AA00-0BE8 - page 349

    LOGO! Manual, 04/2011, A5E03556174-01 349 Determining the cycle time B The program cycle is the complete execution of the ci rcuit prog ram, that is, primarily the reading in of the inputs, the proc essing of the circuit program and the subsequent reading out of the outputs. The cycle time is the time required to exec ute a circuit program once in ...

  • Siemens 6ED1050-1AA00-0BE8 - page 350

    Determining the cycle time LOGO! 350 Manual, 04/2011, A5E03556174-01 Explanation The inverted flag block cha nges its output signal at each progr am execution. Thus, one lo gic level (high or low) width is e xactly equivalent to the length o f one cycle. Hence, a period lasts 2 cycles. The threshold trigger indicat es the ratio of periods per 2 sec ...

  • Siemens 6ED1050-1AA00-0BE8 - page 351

    LOGO! Manual, 04/2011, A5E03556174-01 351 LOGO! without display ("LOGO! Pure") C Because some spe cific applications do not requi re operator cont rol and monitoring units such as buttons or a displ ay, we provide the LOGO! 12/24RCo, LO GO! 24o, LOGO! 24Co, LOGO! 24RCo and LOGO! 230RCo versions without display. View of a LOGO! 230RCo, for ...

  • Siemens 6ED1050-1AA00-0BE8 - page 352

    LOGO! without displ ay ("LOGO! Pure") LOGO! 352 Manual, 04/2011, A5E03556174-01 Operating characteristics LOGO! is ready for operation wh en power is switched on. Switchi ng off a LOGO! without display is equivalent to disconne cting the power supply, e.g. a s if you were removing the plug. The circuit program of LOGO!...o v ersions canno ...

  • Siemens 6ED1050-1AA00-0BE8 - page 353

    LOGO! Manual, 04/2011, A5E03556174-01 353 LOGO! menu structure D D.1 LOGO! Basic Menu overview 0BA6  0R (6& (6& &LUF XLWS URJ UDPL V EXV 581 1R SURJUDP 6HHಯ 0 DLQPHQX ಯ 6HHಯ 6 WDU WPHQ Xಯ 3DUD PHWHUDV VLJ QPHQWP HQX 3DUDPHWHUVHWWLQJ &apos ...

  • Siemens 6ED1050-1AA00-0BE8 - page 354

    LOGO! menu s tructur e D.1 LOGO! Basic LOGO! 354 Manual, 04/2011, A5E03556174-01 Main menu (ESC / > Stop) 0BA6  0R (6& !6WRS!<HV 6HHಯ3URJUDPPLQJPHQXಯ 6HHಯ6HWXSPHQXಯ 6HHಯ6WDU WPHQXಯ 6HHಯ 7 U DQVIHUP HQXಯ 6WDUW 6HWXS &DUG? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 355

    LOGO! menu structure D.1 LOGO! Basic LOGO! Manual, 04/2011, A5E03556174-01 355 Transfer menu (ESC / > Stop → > Card) ! ൺ &DUG !&DUG ൺ !&RS 3URWHFW &RS LQJWK HFLU FXL WSUR JU DPIU RP/2* 2WRDF DUG &RS LQJWK HSUR JU DPIU RPWK HFD UGWR/2* ...

  • Siemens 6ED1050-1AA00-0BE8 - page 356

    LOGO! menu s tructur e D.1 LOGO! Basic LOGO! 356 Manual, 04/2011, A5E03556174-01 Start Menu (RUN)  0R /2*2    0   $4 ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 357

    LOGO! menu structure D.1 LOGO! Basic LOGO! Manual, 04/2011, A5E03556174-01 357 Network menu (ESC / > Stop → > Net work) (0BA7 only)  Ⴍ Ⴍ Ⴍ Ⴍ Ⴍ !,3DGGUHVV ,3DGGUHVV 6XEQHWPDVN *DWHZD !6HWPRGH !1RUPDO !6ODYH !3DVVZRUG 6HWWK H,3DG GUH VV 6HWWK HVXEQHWP DVN 6HWWK HJDWHZD DGGU HV V &a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 358

    LOGO! menu s tructur e D.1 LOGO! Basic LOGO! 358 Manual, 04/2011, A5E03556174-01 See also Parameters (Page 290) Assigning a circuit program name (Page 90) Selecting analog output values fo r RUN/STOP transiti on (Page 107) Defining the type of analog outputs (Pag e 109) Memory space and circuit program size (Page 130) Deleting the circuit program a ...

  • Siemens 6ED1050-1AA00-0BE8 - page 359

    LOGO! menu structure D.2 LOGO! TD LOGO! Manual, 04/2011, A5E03556174-01 359 D.2 LOGO! TD Menu overview LOGO! TD (version ES6 or earlier)  0R (6& (6& &LUF XLWS URJ UDPL V EXV 581 1R SURJUDP 6HHಯ 0 DLQPHQX ಯ 6HHಯ 6 WDU WPHQ Xಯ 3DUD PHWHUDV VLJ QP ...

  • Siemens 6ED1050-1AA00-0BE8 - page 360

    LOGO! menu s tructur e D.2 LOGO! TD LOGO! 360 Manual, 04/2011, A5E03556174-01 Main menu (ESC / > Stop) LOGO! TD (version ES6 or earlier)  0R 6HHಯ 6 WDU WPHQ Xಯ 6HHಯ6HWXS PHQXಯ &RQ I LJXUHJ ORED OSDU DPHWHU VIRUP HV VDJHWH[ W V  ...

  • Siemens 6ED1050-1AA00-0BE8 - page 361

    LOGO! menu structure D.2 LOGO! TD LOGO! Manual, 04/2011, A5E03556174-01 361 Start menu (LOGO! Basic in RUN)  0R /2*2    0   $4 ? ...

  • Siemens 6ED1050-1AA00-0BE8 - page 362

    LOGO! menu s tructur e D.2 LOGO! TD LOGO! 362 Manual, 04/2011, A5E03556174-01 Network menu in LOGO! TD (version ES7), for LOGO! 0BA7 only  Ⴍ Ⴍ Ⴍ Ⴍ Ⴍ !,3DGGUHVV ,3DGGUHVV 6XEQHWPDVN *DWHZD !6HWPRGH !1RUPDO !6ODYH !3DVVZRUG 6HWWK H,3DG GUH VV 6HWWK HVXEQHWP DVN 6HWWK HJDWHZD DGGU HV V & ...

  • Siemens 6ED1050-1AA00-0BE8 - page 363

    LOGO! Manual, 04/2011, A5E03556174-01 363 Order numbers E Modules Variant Designation Order numbe r Basic LOGO! 12/24 RC * LOGO! 12/24 RCE * LOGO! 24 * LOGO! 24C * LOGO! 24RC (AC/DC) LOGO! 230RC (AC/DC) LOGO! 230RCE (AC/DC) 6ED1052-1MD00-0BA 6 6ED1052-1MD00-0BA 7 6ED1052-1CC00-0BA 6 6ED1052-1CC01-0BA 6 6ED1052-1HB00-0BA 6 6ED1052-1FB00-0BA 6 6ED105 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 364

    Order numbers LOGO! 364 Manual, 04/2011, A5E03556174-01 Accessories Accessories Designati on Order number Software LOGO!Soft Comfort V7.0 LOGO!Soft Comfort V7.0 Upgrade 6ED1058-0BA02-0YA 1 6ED1058-0CA02-0YE 1 LOGO! Memory Card 6ED1056-1DA00-0BA0 SIMATIC Memory Card (2M) 1) 6ES7954-8LB00-0AA0 Memory cards SIMATIC Memory Card (24M) 1) 6ES79 54-8LF00- ...

  • Siemens 6ED1050-1AA00-0BE8 - page 365

    LOGO! Manual, 04/2011, A5E03556174-01 365 Abbreviations F AM Analog modul e B1 Block number B1 BN Block Number C LOGO! device designati on: integrated clock CM Communica tion Module Cnt Count = Counter input Co Connector Dir Direction (of count, for example) DM Digital Module E LOGO! device designation: integrated Ethernet interface EIB European In ...

  • Siemens 6ED1050-1AA00-0BE8 - page 366

    Abbreviation s LOGO! 366 Manual, 04/2011, A5E03556174-01 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 367

    LOGO! Manual, 04/2011, A5E03556174-01 367 Index A Amplifier analog, 226 Analog comparator, 218 values, 154 Analog amplifier, 226 Analog differential trigger, 216 Analog filter, 271 Analog module, 14 Analog multiplexer, 248 Analog ramp, 251 Analog threshold trigger, 213 Analog watchdog, 223 AND, 143 AS interface bus communication failure, 68 communi ...

  • Siemens 6ED1050-1AA00-0BE8 - page 368

    Index LOGO! 368 Manual, 04/2011, A5E03556174-01 DIN rail, 39 Display lifetime LOGO! TD, 347 Display modules, 14 Divide by 0 error, 268 DM8... See Digital module, 14 E Edge evaluation, 144, 146 EIB bus communication failure, 68 communication states, 68 EIB/KNX, 15 Errors, mathematic instru ction, 268 Ethernet interface, 62 exclusive OR, 149 Expansio ...

  • Siemens 6ED1050-1AA00-0BE8 - page 369

    Index LOGO! Manual, 04/2011, A5E03556174-01 369 Modems, 6 Multiple function switch, 182 N NAND, 145 Negation, 149 of an input, 142 of an SF input, 156 Network analog inputs, 141 Network analog outputs, 141 Network communications, 4 Network digital inputs, 141 Network digital outputs, 141 Network inputs/outputs, 141 normal, 123 NOT, 149 O Offset, 15 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 370

    Index LOGO! 370 Manual, 04/2011, A5E03556174-01 Analog threshold trigger, 213 Analog watchdog, 223 Astronomical clock, 195 Asynchronous pul se generator, 175 Average value, 276 Basics, 150 Edge-triggered wipin g relay, 172 Hours cou nter, 205 Latching relay, 228 Mathematic instruction, 265 Mathematic instruction error detection, 268 Max/Min, 273 Me ...

  • Siemens 6ED1050-1AA00-0BE8 - page 371

    Index LOGO! Manual, 04/2011, A5E03556174-01 371 X XE * MERGEFORMAT, 107 XOR, 149 Y Yearly timer, 190 Z Zero division error, 268 Zero offset, 154 ...

  • Siemens 6ED1050-1AA00-0BE8 - page 372

    Index LOGO! 372 Manual, 04/2011, A5E03556174-01 ...

Manufacturer Siemens Category Switch

Documents that we receive from a manufacturer of a Siemens 6ED1050-1AA00-0BE8 can be divided into several groups. They are, among others:
- Siemens technical drawings
- 6ED1050-1AA00-0BE8 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 6ED1050-1AA00-0BE8
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 6ED1050-1AA00-0BE8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 6ED1050-1AA00-0BE8, service manual, brief instructions and user manuals Siemens 6ED1050-1AA00-0BE8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 6ED1050-1AA00-0BE8.

Similar manuals

A complete manual for the device Siemens 6ED1050-1AA00-0BE8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 6ED1050-1AA00-0BE8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 6ED1050-1AA00-0BE8.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 6ED1050-1AA00-0BE8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 6ED1050-1AA00-0BE8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 6ED1050-1AA00-0BE8, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 6ED1050-1AA00-0BE8 - which should help us in our first steps of using Siemens 6ED1050-1AA00-0BE8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 6ED1050-1AA00-0BE8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 6ED1050-1AA00-0BE8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 6ED1050-1AA00-0BE8?

Use the form below

If you did not solve your problem by using a manual Siemens 6ED1050-1AA00-0BE8, ask a question using the form below. If a user had a similar problem with Siemens 6ED1050-1AA00-0BE8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)