English dropdown-ico

Manual Cisco Broadband Access Center

76 pages 0.1 mb
Download

Go to site of 76

Summary
  • Cisco Broadband Access Center - page 1

    Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco Br oadband A ccess Center fo r Cable Installation Guide Re lease 2.7 Text Part Number: OL -19105-01 ...

  • Cisco Broadband Access Center - page 2

    THE SPECIFICATION S AND INFORMATION RE GARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. A LL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILIT Y FOR THEIR APPLICATION OF ANY PRO ...

  • Cisco Broadband Access Center - page 3

    iii Cisco Broadband Access Cen ter fo r Cable Instal lation Guide 2.7 OL-19105-01 CONTENTS Preface vii Audience vii How This Guide Is Organized vii Document Conventions viii Related Documentation ix Obtaining Documentation and Submitting a Serv ice Request ix CHAPTER 1 Overview 1-1 Operating System Requirements 1-1 JDK Patches for Solaris 8 1-1 JDK ...

  • Cisco Broadband Access Center - page 4

    Contents iv Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Validating E xtensions 3-6 Installing the Key Distribution Center 3-7 Installing the Device Provisioning Engine 3- 8 Installing Components Using the CLI 3-8 Installing the Regional Distribution Unit 3-9 Installing Network Registrar Extensions 3-11 Installing the ...

  • Cisco Broadband Access Center - page 5

    Contents v Cisco Broadband Access Cen ter fo r Cable Instal lation Guide 2.7 OL-19105-01 Configuring a Device Provisioning Engin e for Voice Technology 7-5 Setting Up Voice Te chnology 7-5 Controls Available 7-7 Debugging 7-7 APPENDIX A Network Registra r Configuration File Exampl e A-1 Configuration Scripts A-1 Sample Script for DOCSIS Modems and ...

  • Cisco Broadband Access Center - page 6

    Contents vi Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 ...

  • Cisco Broadband Access Center - page 7

    vii Cisco Broadband Access Cen ter fo r Cable Instal lation Guide 2.7 OL-19105-01 Preface W elcome to the Ci sco Br oadband Access Center for Cable Install ation Guide 2.7. This chapter pro vides an outline of the other chapt ers in this guide, and demonstrates the styles and con v entions used in the guide. This chapter contains the following sect ...

  • Cisco Broadband Access Center - page 8

    viii Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Preface Document Conventions This guide uses the follo wing con ven tions: • Boldface is used for commands, ke ywords, and buttons. • Italic is used for command input f or which you supply v alues. • Screen font is used f or examples of info rmation that are displ ...

  • Cisco Broadband Access Center - page 9

    ix Cisco Broadband Access Cen ter fo r Cable Instal lation Guide 2.7 OL-19105-01 Preface Related Documentation Refer to these manuals for additional informat ion: • Release Notes for Br oad band Access Center for Cable, Release 2.7 • Cisco Br oadban d Access Center for Cable Admin istrator’ s Guide • Cisco Br oadban d Access Center for Cabl ...

  • Cisco Broadband Access Center - page 10

    x Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Preface ...

  • Cisco Broadband Access Center - page 11

    CH A P T E R 1-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 1 Overview Broadband Access Center f or Cable (B A CC) automates t he process of conf iguring and pro visioning cable network de vices. B A CC interfaces with Cisco Netwo rk Registrar , which includes a high-speed DHCP server for IP address management and ...

  • Cisco Broadband Access Center - page 12

    1-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 1 Overvi ew Network Registrar Requirements JDK Patches for Solaris 9 The JDK patches recommended for suc cessful B A CC installation include: KDC Patches The KDC patches required for successful B A CC i nstallation include: • 112438-01 • 109326-06 Network Reg ...

  • Cisco Broadband Access Center - page 13

    1-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 1 Overview Hardware Requireme nts • For the DPE-590, refer to the Cisco Content Engine 500 Series Har dwar e Inst allation Guide . This can be found at: http://www .cisco.com/en/US/docs/app_ntwk_services/w aas/ce/ce500/installatio n/guide/ ce500hig.html • F ...

  • Cisco Broadband Access Center - page 14

    1-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 1 Overvi ew Types of Installations Types of Installations This guide discusses tw o types of installati on: • Indi vidual component installati on—The installatio n program enables you to install one or mor e indi vidual componen ts of B A CC. The ind ividu al ...

  • Cisco Broadband Access Center - page 15

    CH A P T E R 2-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 2 Preparing to Install Components This chapter pro vides the informati on you need to prepare for a successful Broadband Access Center for Cable (B A CC) component inst allation, including these to pics: • Broadband Access Center for Cable Compo nents, p ...

  • Cisco Broadband Access Center - page 16

    2-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 2 Prepa ring to Install Components Installation and Startup Proc ess If, during DPE installation, th e installation program detects the presence of a TFTP serv er running on the same computer th at the DPE being instal le d on, the installatio n is immediately te ...

  • Cisco Broadband Access Center - page 17

    2-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 2 Prepar ing to Install Components Installation and Startup Process 5. Install the RDU. Wh en you install the RDU, ensure t hat you: • Obtain a valid BA C C license key for each technology that you provision. • Configure the syslog f ile for alerts. See the ...

  • Cisco Broadband Access Center - page 18

    2-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 2 Prepa ring to Install Components Installation and Startup Proc ess 6. Install and conf igure Netw ork Regi strar , if it is not alr eady installed on your syst ems. W e recommend that you use N etwork Re gistrar 6.1.2.3 o r higher . For more information, see th ...

  • Cisco Broadband Access Center - page 19

    2-5 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 2 Prepar ing to Install Components Broadband Acce ss Center Database Re quirements Broadband Access Center Database Requirements Before you install B A CC, be aware of these database considerat ions: • File system block size • Support for large f iles File ...

  • Cisco Broadband Access Center - page 20

    2-6 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 2 Prepa ring to Install Components Installation Checklist Step 2 T o determine the file system block size, use the df command. For example: # df -g /dev/dsk/c0t0d0s4 Example output from th e df command is as follo ws: /var (/dev/dsk/c0t0d0s4 ): 8192 block size 10 ...

  • Cisco Broadband Access Center - page 21

    2-7 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 2 Prepar ing to Install Components Installation Note Cisco recommends that you install the database transaction logs on a di fferent physical di sk than either the home directory or the data directory . • For the RDU, select the shared secret password th at B ...

  • Cisco Broadband Access Center - page 22

    2-8 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 2 Prepa ring to Install Components Installation Step 5 Select one of the tw o installation types: • In div id ua l C om po ne nt s —This option enables you to install an RDU, Network Registrar extensions, the DP E , o r t he KD C . S ee these sections for the ...

  • Cisco Broadband Access Center - page 23

    2-9 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 2 Prepar ing to Install Components Installation The program prompts yo u to confir m the installation type. Step 6 Press y and then Enter to conti nue. At this point you must decide which installat ion you want to perform. T o install ind iv idual components go ...

  • Cisco Broadband Access Center - page 24

    2-10 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 2 Prepa ring to Install Components Installation ...

  • Cisco Broadband Access Center - page 25

    CH A P T E R 3-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 3 Installing Components This chapter explains the procedures you must follow to correct ly install Broadband Access Cent er for Cable (B A CC) components in a Solaris operating system en vironment. This chapte r contains the se topics: • Installing Compo ...

  • Cisco Broadband Access Center - page 26

    3-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Compo nents Using the Graph ical User Interface Installing the Regional Distribution Unit Install the RDU server on a Solaris 8 server that meets the requirem ents descri bed in the “Hardware Requirement s” section on page ...

  • Cisco Broadband Access Center - page 27

    3-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Components Usi ng the Graphical User Interface Note The installation program obtains t he IP address of the RDU automatical ly . Y ou do not need to enter this v alue. Caution If you change the def ault listening por t v alue, ...

  • Cisco Broadband Access Center - page 28

    3-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Compo nents Using the Graph ical User Interface Installing Extensions Before you install the Netw ork Registrar e xte nsions, complete the st eps described in the “Installati on and Startup Process” s ection on page 2-2 . T ...

  • Cisco Broadband Access Center - page 29

    3-5 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Components Usi ng the Graphical User Interface Step 12 Click Next . The Shared Secret Password screen appears. Step 13 Enter and confirm the shared secret password. Note Use the shared secret pa ssword spec if ied dur ing the ...

  • Cisco Broadband Access Center - page 30

    3-6 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Compo nents Using the Graph ical User Interface <NR_HOME>/usrbin/nrcmd -N admin -P changeme "dhcp reload" Caution Be aware that you also must conf i gure client-classes, scope sel ection tags, policies, and scop ...

  • Cisco Broadband Access Center - page 31

    3-7 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Components Usi ng the Graphical User Interface Installing the Key Distribution Center T o install th e K ey Distribution Center (K DC), complete the steps described i n the “Installation and Startup Process” section on pag ...

  • Cisco Broadband Access Center - page 32

    3-8 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Comp onents Using the CLI Caution After installing the KDC, you must i nstall your lice nses, and the chain of certif icates, or the KDC will not start. Installing the Device Provisioning Engine T o install the DPE, comp lete t ...

  • Cisco Broadband Access Center - page 33

    3-9 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Co mponents Using th e CLI Installing the Regional Distribution Unit T o install an RDU, complete the st eps described in the “Installing from the Comman d Line” section on page 2-8 . Then, follow these steps: Step 1 When ...

  • Cisco Broadband Access Center - page 34

    3-10 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Comp onents Using the CLI Step 8 Press y and Enter to continue. The program prompts you to enter the databa se transaction logs destinatio n. Step 9 T o accept the default dire ct ory , /var/CSCObpr , press Enter ; or enter an ...

  • Cisco Broadband Access Center - page 35

    3-11 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Co mponents Using th e CLI If you are performing a lab installation, then the password will be used for all the servers. If this is a component installation, then the password you enter must be the same as the components prev ...

  • Cisco Broadband Access Center - page 36

    3-12 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Comp onents Using the CLI The program prompts you t o enter the home directory destination. Step 4 T o accept the default home directory destination, /opt/CSC Obpr/, press Enter ; or enter another directory . For example: Home ...

  • Cisco Broadband Access Center - page 37

    3-13 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Co mponents Using th e CLI Step 11 Press y and Enter to continue. The program then lets you decide if you are goin g to be provisionin g voice technology devices. For example: Are you going to use a device(s) that supports Pa ...

  • Cisco Broadband Access Center - page 38

    3-14 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Comp onents Using the CLI Step 18 T o configure t he extensions compl ete the procedure described in the “Configuring Extensi ons” section on page 3-5 . Installing the Key Distribution Center T o install t he KDC: Step 1 W ...

  • Cisco Broadband Access Center - page 39

    3-15 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Co mponents Using th e CLI Step 7 Press y and Enter to create the d irectory and continue. The program prom pts you to enter the KDC realm name. For example: Key Distribution Center (KDC) Realm Name Enter the Kerberos realm n ...

  • Cisco Broadband Access Center - page 40

    3-16 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Comp onents Using the CLI Installing the Device Provisioning Engine T o install t he DPE: Step 1 When the installation pr ogram prompts you to select one or more components, press y and Enter at Dev ice Provisioning Engine (y/ ...

  • Cisco Broadband Access Center - page 41

    3-17 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 3 Installing Components Installing Co mponents Using th e CLI ========== Confirmation ========== The Component Installation will use the following parameters to install the DPE component: Home directory: /opt/CSCObpr Data directory: /var/CSCObpr Step 8 Press y ...

  • Cisco Broadband Access Center - page 42

    3-18 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 3 Installing Compo nents Installing Comp onents Using the CLI ...

  • Cisco Broadband Access Center - page 43

    CH A P T E R 4-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 4 Installing in a Lab Environment This chapter d escribes how to install B A CC in a la b en vironment to demonstrate product fu nctionality and how to configure a CMTS and Network Registrar to support BA CC. When you install Broadban d Acce ss Center for ...

  • Cisco Broadband Access Center - page 44

    4-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Installing in a Lab Environment Using the GUI Installing in a Lab En vironment Using the GUI The lab installation p rompts for this informati on: • B A CC destinat ion directory • Network Registrar admin istrator username an ...

  • Cisco Broadband Access Center - page 45

    4-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Installing in a La b Environment Using the CLI Step 13 The Shared Secret Password screen appears. Step 14 Enter and confirm the shared secret password. This pas swo rd is a token that a B A CC server uses to authenticate commu ...

  • Cisco Broadband Access Center - page 46

    4-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Installing in a Lab Environment Using the CLI T o install B A CC in a lab en vir onment, complete the steps described in the “Installing from the Command Line” section on page 2-8 : Step 1 The program displ ays this message: ...

  • Cisco Broadband Access Center - page 47

    4-5 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Installing in a La b Environment Using the CLI Step 8 Enter the appropriate KDC Interface Address, FQDN, and Realm information and then press Enter . The program re displays the KDC inform ation and prompts you to confirm this ...

  • Cisco Broadband Access Center - page 48

    4-6 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Configuring Networ k Registrar and a CMTS Caution After installation is complete, you must install your licenses and the chain of certificates or the KDC will not start. Configuring Network Registrar and a CMTS For B A CC to fun ...

  • Cisco Broadband Access Center - page 49

    4-7 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Configuring Ne twork Registra r and a CMTS Step 3 T o configure your CMTS t o insert the DHCP relay agent informati on option in forward ed BOO TREQUEST messages, use th is Cisco IOS command: ip dhcp relay information option T ...

  • Cisco Broadband Access Center - page 50

    4-8 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 4 Insta lling in a Lab Environment Configuring Networ k Registrar and a CMTS ...

  • Cisco Broadband Access Center - page 51

    CH A P T E R 5-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 5 Post-Installation Activities This chapter describes acti vities you can perform after installing B ACC: • Enabling a Network Registrar Spoofing DNS Server , page 5-1 • Config uring the Syslog Utilit y to Recei ve Alerts fr om B A CC, page 5-1 • Uni ...

  • Cisco Broadband Access Center - page 52

    5-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 5 Post -Installation Activi ties Uninstalling Broadband Access Cente r touch /var/log/bpr.log Step 3 Open the /etc/syslog.con f file wi th a text editor . Step 4 Add this line to the /etc/sys log.conf file: local6.info /var/log/bpr.log Note Y ou must insert one o ...

  • Cisco Broadband Access Center - page 53

    5-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 5 Po st-Installation Activities Uninstalling Broadban d Access Center Uninstalling BACC from the Graphical User Interface T o uninstall B A CC using the graphical user int erface: Step 1 Log in as r oot . Step 2 Manually remo ve the conf iguration of th e B A C ...

  • Cisco Broadband Access Center - page 54

    5-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 5 Post -Installation Activi ties Uninstalling Broadband Access Cente r Step 1 Log in as r oot . Step 2 Manually remo ve the conf iguration of th e B A CC extensio ns on the Network Re gistrar serv er . Y ou can do this from any server that has nrcmd inst alled an ...

  • Cisco Broadband Access Center - page 55

    CH A P T E R 6-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 6 Upgrading Broadband Access Center for Cable This chapter describes ho w to upgrade a B A CC 2.5.0.2 or higher installati on to B A CC 2 .7. If you ha ve a B A CC release preceding B A CC 2.5.0.2, you must fi rst upgrade your sy stem to B A CC 2.5.0.2 and ...

  • Cisco Broadband Access Center - page 56

    6-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 6 Upgrad ing Broadband Access Center for Cable Before You Begin Before You Begin The follo wing procedure is required b efore upgrading all components e xcept the RDU. Step 1 Untar the upgrade f ile(27upgrade .tar) o nto the computer where th e B A CC components ...

  • Cisco Broadband Access Center - page 57

    6-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 6 Upgrading Broa dband Access Center for Cabl e Upgrading the Solaris DPE Step 3 Run this command to v erify that the output i ndicates it is B A CC release 2.7: # pkgparam CSCObpr VERSION The version in formation returned should be 2.7 . Note The pre vious ver ...

  • Cisco Broadband Access Center - page 58

    6-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 6 Upgrad ing Broadband Access Center for Cable Upgrading Hardw are DPEs Upgrading Hardware DPEs Y ou may remotely patch your DPE devices, or if you hav e local access to these devices, you can fully reimage them. Refer to the recov ery CD-R OM releas e notes that ...

  • Cisco Broadband Access Center - page 59

    6-5 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 6 Upgrading Broa dband Access Center for Cabl e Upgrading Network Registrar Extensions Upgrading Network Registrar Extensions Use this procedure to upgrade the Netw ork Regi strar extensio ns from B A CC 2.5.0.2, or 2. 6.x to BAC C 2.7: Step 1 Run the 27-upgrad ...

  • Cisco Broadband Access Center - page 60

    6-6 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 6 Upgrad ing Broadband Access Center for Cable Migrating the RDU Data base # pkgparam CSCObpr VERSION The version in formation returned should be 2.7 . Step 4 Go to the /opt /CSCObpr/kdc/internal/bin directory . Provided that the upgrade w as successful, this dir ...

  • Cisco Broadband Access Center - page 61

    6-7 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 6 Upgrading Broa dband Access Center for Cabl e Migrating the RDU Da tabase When running this scri pt, use this syntax: ./migrateDb .sh t emp_dir Where temp_dir identifies the te mporary directory . When performing this migr ation, you must allo w for the av ai ...

  • Cisco Broadband Access Center - page 62

    6-8 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 6 Upgrad ing Broadband Access Center for Cable Migrating the RDU Data base ...

  • Cisco Broadband Access Center - page 63

    CH A P T E R 7-1 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 7 Setting Up a Device Provisioning Engine A Cisco De vice Provis ioning Engine caches pro visioning information and handl es all conf iguration requests including d ownload ing conf iguration f iles to de vices. It is inte grated with the Cisco Netw ork Re ...

  • Cisco Broadband Access Center - page 64

    7-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Logging In Step 2 Attach the other end of the cable to the serial port on the computer that you want to use to con figur e the DPE. Step 3 Proceed to the “Configuri ng and Running a T erminal Emulation Program” sectio ...

  • Cisco Broadband Access Center - page 65

    7-3 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Configuring a De vice Provisioning Engine for Data Step 2 Run the enable command to en ter pri vileged mod e. Y ou must be working in pri vi leged mode to configure the DPE. F or example: localhost> enable The system ...

  • Cisco Broadband Access Center - page 66

    7-4 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Configuring a Device Provisioning Engine for Data Step 1 Assign a stat ic IP address and subnet mask to the f irs t ethernet port on the DPE. F or example, t o assign IP address 10.10.10.1 and the sub net mask 255.255.255 ...

  • Cisco Broadband Access Center - page 67

    7-5 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Configuring a Device Provisioning Engine fo r Voice Technology Configuring a Device Provisioning Engine for Voice Technology This section describes t hose conf igur ation acti vities that must be performed to pr operly ...

  • Cisco Broadband Access Center - page 68

    7-6 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Configuring a D evice Provisioning Engin e for Voice Technolo gy For a lab instal lation, the KDC and DPE are installe d on the same host, and the installatio n program automatically generates a random KDC se rvice k ey f ...

  • Cisco Broadband Access Center - page 69

    7-7 Cisco Broadband Access Center fo r Cable Installa tion Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Debugging Controls Available These commands described in this secti on, provide addi tional confi guration settings. Changing these properties on the DPE-590 causes the chan ge to take ef fect immediately , wi thout a D ...

  • Cisco Broadband Access Center - page 70

    7-8 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Chapter 7 Setting Up a Device Provisioning Engine Debugging Received 0 MTA provisioning failed SNMP informs. Running for 11 days 1 hours 59 mins 15 secs. This command also checks if v oice technolog y provis ioning is running, and displays th e current health of the SNMP ...

  • Cisco Broadband Access Center - page 71

    A-1 Cisco Broadband Access Cen ter for Cable Installation Guide 2.7 OL-19105-01 APPENDIX A Network Registrar Configuration File Example This appendix describes the sample configu ration fil es in cluded wi th this insta llation. Thi s file is typical of the f iles you use during the B A C inst allation. Configuration Scripts This section descri bes ...

  • Cisco Broadband Access Center - page 72

    A-2 Cisco Broadband Access Center for Cable Installation Guide 2.7 OL-19105-01 Appendix A Network Registrar Configuration File Example Configuration Scripts Sample Script for DOCSIS Modems and PacketCable MTAs This sample conf iguration nr cmd script ( bpr_cnr_pktcbl_sample_conf ig.nr cmd ) is used for a high-speed data deployment o f DOCSIS modems ...

  • Cisco Broadband Access Center - page 73

    IN-1 Cisco Broadband Access Cen ter fo r Cable Instal lation Guide 2.7 OL-19105-01 INDEX A API RDU 2-1 available disk space 4-1 B BAC administrator’s password 2-3 alert messages 5-1 installati on 1-vii graphica l user inter face 1-4 home and da ta directories 3-2, 3-4, 3-9, 3-12 server requirements 1-2 license ke y 2-3, 4-1 Solaris 8 1-1 Broadban ...

  • Cisco Broadband Access Center - page 74

    Index IN-2 Cisco Broadband Access Cen ter for Cable Installation Guide 2.7 OL-19105-01 DNS DNS server 5-1 enabling a spoofing server 5-1 for the DPE 7-4 Network Registrar 1-3 reload 5-1 server 7-4 DOCSIS configuration management 2-1 Documentation 1-ix conventions 1-viii organization 1-vii related documents 1-ix Domain Name System See DNS DPE comman ...

  • Cisco Broadband Access Center - page 75

    Index IN-3 Cisco Broadband Access Cen ter fo r Cable Instal lation Guide 2.7 OL-19105-01 installati on types 1-4 individual compon ent installation 1-4 lab installation 1-4 Installed Components Sum mary screen 3-5 IP addresses of Primary DHCP Server 3-5, 4-3 of Primary DNS Server 3-5, 4-3 of Secondary DHCP Server 3-5, 4-3 of Secondary DNS Server 3- ...

  • Cisco Broadband Access Center - page 76

    Index IN-4 Cisco Broadband Access Cen ter for Cable Installation Guide 2.7 OL-19105-01 Solaris 1-vii installing B AC 1-vii setting up DPEs 1-vii TFTP server 4-2 Solaris inst allation checklist 2-6 Network Registrar requir ements 1-2 operating system environment 3-1 RDU 2-1, 3-2 T terminal emulation pr ogram 7-2 U uninstall.bin 5-4 uninstall.bin d i ...

Manufacturer Cisco Category Network Router

Documents that we receive from a manufacturer of a Cisco Broadband Access Center can be divided into several groups. They are, among others:
- Cisco technical drawings
- Broadband Access Center manuals
- Cisco product data sheets
- information booklets
- or energy labels Cisco Broadband Access Center
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Broadband Access Center.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Broadband Access Center, service manual, brief instructions and user manuals Cisco Broadband Access Center. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Broadband Access Center.

Similar manuals

A complete manual for the device Cisco Broadband Access Center, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Broadband Access Center by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Broadband Access Center.

A complete Cisco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Broadband Access Center - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Broadband Access Center, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Broadband Access Center, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Broadband Access Center - which should help us in our first steps of using Cisco Broadband Access Center
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Broadband Access Center
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Broadband Access Center in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Broadband Access Center?

Use the form below

If you did not solve your problem by using a manual Cisco Broadband Access Center, ask a question using the form below. If a user had a similar problem with Cisco Broadband Access Center it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)