Manual LevelOne FBR-1161

58 pages Not applicable
Download

Go to site of 58

Summary
  • LevelOne FBR-1161 - page 1

    FBR-1 161 ADSL2+ Modem Router 1W AN 1LAN 1USB User Manual V1.1 ...

  • LevelOne FBR-1161 - page 2

    ii T able of Content 1. INTRODU CTION................................................... ...................................... ....................................... ....... 1 1.1. O VERVIE W .................. ...................................... ...................................... ...................................... ..... 1 1.2. F EA TU ...

  • LevelOne FBR-1161 - page 3

    iii 4.4.2. IP Filter ............................................ ...................................... ....................................... .............. 42 4.4.3. SNMP ............................................ ...................................... ...................................... ................. 44 4.4.4. UPnP ................... ...

  • LevelOne FBR-1161 - page 4

    1 1. Introduction 1.1. Overview Welcome to the Lev elOne FBR-1 161. Y ou r r outer is an “all- in-one” unit, combining an ADS L modem, ADSL router and Ethernet netw ork switch, providing e verything you need to get the machines on your network con nected to the Internet over your ADSL broadband connection. The FBR-1 161 complies with ADSL2+ sta ...

  • LevelOne FBR-1161 - page 5

    2 machines as a DHCP client to accept a dynamically assigned IP a ddress from DHCP server and reboot. Each time local mach ine is powered up; the router will recognize it and assign an IP address to instan tly connect it to the LAN. For advanced users, Virtual Serv ice f unction allows th e product to provide lim ited visibility to local machines w ...

  • LevelOne FBR-1161 - page 6

    3 1.2. Features  A DSL Multi-Mode St a ndard supports downstream rates of up to 24 Mbps and upstrea m rates of up to 1 Mbps. It also supports rate management that allows ADSL subscribers to select an Internet access speed suiting their need s and budgets. It is compliant w ith Multi-Mode standard (ANSI T1.413, Issue 2; G .dmt(G .992.1); G . lite ...

  • LevelOne FBR-1161 - page 7

    4 www .yahoo.com) and IP address. When a local machine sets its DNS serv er with this router ’ s IP address, every DNS conversion request packet from the PC to this router will be forwarded to the rea l DNS in the outside network.  Dynamic Domain Name S ystem (DDNS) The Dynamic DNS service allows you to a lias a dynamic IP address to a st atic ...

  • LevelOne FBR-1161 - page 8

    5 Supports web based GUI for configuration and management. It is u ser-friendly and comes with on-line help. It also supports remote management capability for remote users to configure and manage th is product.  Firmware Upgradeable Device can be upgraded to the latest firmware through the WEB based GUI. ...

  • LevelOne FBR-1161 - page 9

    6 2. Inst allation 2.1. Import ant No te W arning :  Do not use the F BR-1 161 i n high hum idity or high tem peratures.  Do not use the sam e po wer source f or the FBR-1 161 a s other equipm ent.  Do not open or repair the case yourself. If the F BR-1 161 is too hot, turn off the power imm ediately and have it repaired at a qu alified s ...

  • LevelOne FBR-1161 - page 10

    7 2.3. Front Panel LED Description PPP Lit steady when there is a P PPoA / PPPoE connection. ADSL Lit when successfully connected to an ADSL DSLAM (“linesync”) USB Lit when the USB port is connected to the PC and working properly LAN Lit when connected to an E thernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is T ransm i ...

  • LevelOne FBR-1161 - page 11

    8 2.4. Rear Panel Port Description Switch Power ON/OFF switch POW ER Connect the supplied power adap ter to this jack. RESET After the device is powered on, press it to reset the device o r restore to factory default settings. 0-3 seconds: reset the device 6 seconds a bove: restore to fa ctory default settings (this is used when you can not login t ...

  • LevelOne FBR-1161 - page 12

    9 2.5. Cabling Through USB Port The product can b e us ed as a Netw ork Adapter on your PC. T hat means y ou do no t have to install a network adapter first on your PC before conne cting the ADSL Modem/Router . Just connect the supplied USB cable to the USB port of th e ADSL2+ Modem/Router and connect the other end to the PC. Make sure that your AD ...

  • LevelOne FBR-1161 - page 13

    10 3. Basic Inst allatio n The router can be configured with your web browse r . A web browser is inclu ded as a standard application in the following operating systems: W indows 98SE/Me/NT/2000/XP , etc. The product provides a very easy and user-friendly interface for configuration. 3.1. Before Configuration PCs mu st have an Ethernet interface in ...

  • LevelOne FBR-1161 - page 14

    1 1 3.3. Inst alling the USB Driver If you connect the device th rough USB port instead of Ethernet port, for the first time the USB cable i s co nnected to the PC, W indows will automatically detect the dev ice. Follow the steps to inst all the USB driver . 3.3.1. For Windows XP & 2000 S tart W indows. Then insert the installati on CD into the ...

  • LevelOne FBR-1161 - page 15

    12 Then follow screen. T o click the type of setup you prefer , then click Next >. T o setup enough inf ormation of coping the program files then click Next >. ...

  • LevelOne FBR-1161 - page 16

    13 Please plug USB cable into A DSL USB Modem. Then, click “Finish”. ...

  • LevelOne FBR-1161 - page 17

    14 3.3.2. For Windows 98SE & Me S tart W indows. Then insert the installati on CD into the CD-ROM drive. In next window , to specify the CD ROM driver directory and to continue. T o choose the setup language. ”and click “Next >”. (There are three langua ges that user can choose: English. G erman and French) Then follow screen. ...

  • LevelOne FBR-1161 - page 18

    15 T o click the type of setup you prefer , then click Next >. T o setup enough inf ormation of coping the program files. Select “W ant to restart my computer now” and click OK> Then, click “Finish”. ...

  • LevelOne FBR-1161 - page 19

    16 3.4. Configuring Y our PC Network Properties 3.4.1. Windows XP Go to S tart / Control Panel (in Classic V iew). In the Control Panel, double -click on Network Connection s Double-click Local Area Connection. In the Local Area Connection S tatus window , click Properties. Select Internet Protocol (TCP/IP) and click Properties. Select the Obtain a ...

  • LevelOne FBR-1161 - page 20

    17 3.4.2. Windows 2000 1. Go to S tart / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connection s. 2. Double-click Loca l Area Connection. 3. In the Local Area Connection S tatus window click Properties. 4. Select Internet Protocol (TCP /IP) and click Properties. 5. Select the Obtain an IP a ddress automatica ...

  • LevelOne FBR-1161 - page 21

    18 3.4.3. Windows 98SE/Me 1.Go to S tart / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Conf iguration tab. 2.Select TCP/IP ->NE2000 Co mpatible, or the name of your Network Inte rface Card (NIC) in your PC. 3.Select the Obtain an IP address automatically radio button . 4.Then select the DNS Configuratio ...

  • LevelOne FBR-1161 - page 22

    19 3.4.4. Configuring PC in Windows NT4.0 Note:  If you configuring the Network Properties through USB Port, please be note to specif y a DNS IP address in PC and do n ot use “Obtain DN S server a ddress autom aticall y ” 1. Go to S tart / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protoco ls tab. ...

  • LevelOne FBR-1161 - page 23

    20 3.5. LAN and W A N Port A ddresses The parameters of LAN and W AN ports are pre-set in the factory . The default values are shown below . LAN Port W AN Port IP address 192.168.1.254 The PPPoE f unction is enabled to automatically get the WAN port configuration from the ISP , but you have to set the username and password first. Subnet Mask 255.25 ...

  • LevelOne FBR-1161 - page 24

    21 3.7. Configuring with y our Web Bro wser Open your web browser , en ter the IP address of your router , which by defa ult is 192.168.1.254, and click “Go”, a user name and password window prompt will appear . The default username and password are “admin” and “admin”. Congratulation! Y ou are now successfully logon to the ADSL2+ Modem ...

  • LevelOne FBR-1161 - page 25

    22 4. Configurati on At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including:  Quick S tart (wizard setup)  Interface Setup (Internet, LAN)  Advanced Setup (Routing, NA T , ADSL)  Access Management (ACL, IP Filter , SNMP , UPnP , DDNS)  Maintenance ( ...

  • LevelOne FBR-1161 - page 26

    23 Quick S tart W izard S tep 1. Set your new passw ord. S tep 2: Choose your time zone ...

  • LevelOne FBR-1161 - page 27

    24 S tep 3: Set your Internet connection S tep 4: Restart your ADSL Rou ter ...

  • LevelOne FBR-1161 - page 28

    25 4.2. Interface Setup Click to access the following sub-items that configure the ADSL router: Internet, LAN 4.2.1. Internet ...

  • LevelOne FBR-1161 - page 29

    26 A TM VC Virtual Circuit : VPI (Vi rtual Path Identifier) and VCI (V irtual Channel Ide ntifier) define a virtual circuit. VPI :The valid range fo r the VPI is 0 to 255. Enter the VPI assigned to you. This field may already be conf igured. VCI : The valid range for the VCI is 32 to 65535. Enter the VCI assigned to you. This field may already be c ...

  • LevelOne FBR-1161 - page 30

    27 Dynamic IP A ddress Encapsul ation: 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux , 1483 Routed IP LLC(IPoA), 1483 Routed IP VC-Mux, check your ISP for proper connection type. NA T ( Net work Address T ran slation ) : Select Enable or Disable from the drop-sown list box. Refer to the NA T chapter for more details. Default Route: Select Y es or NO ...

  • LevelOne FBR-1161 - page 31

    28 St atic IP A ddress Encapsul ation: 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux , 1483 Routed IP LLC(IPoA), 1483 Routed IP VC-Mux, check your ISP for proper connection type. St atic IP Address : Enter the IP address of ADSL Router in dotted decimal n otation, it’s assigned by your ISP . IP Subnet Mask : The default is 255.0.0.0. User can chang ...

  • LevelOne FBR-1161 - page 32

    29 PPPoE/PPPo A User Name : Enter the user n ame exactly as your ISP assigned. Password : Enter the password associated with the u ser name above. Encapsul ation : select Bridge in the Mo de field, select either PPPoE LLC, PPPoE VC-Mux, PPPoA LLC and P PPoA VC-Mux , check your ISP for proper connection type. Bridge Interface : Activated acts as mod ...

  • LevelOne FBR-1161 - page 33

    30 St atic IP Address : Enter the IP address of ADSL Router in dotted decimal n otation, it’s assigned by your ISP . IP Subnet Mask : The default is 255.0.0.0. User can change it to other such as 255.255.255.0.T ype the subnet mask a ssigned to you by your ISP (if giv en). Gateway : Y o u m ust specify a gat eway IP address (supplied by your I SP ...

  • LevelOne FBR-1161 - page 34

    31 4.2.2. LAN A Local Area Network (LAN) is a shared communication system to which many compu ters are attached and is limited to the immediate area, usually the same building or floor of a building. Router Local IP IP Address : Enter the IP address of ADSL Router in dotted decimal notation, for example, 192.168.1.254 (fa ctory default). IP Subnet ...

  • LevelOne FBR-1161 - page 35

    32 DHCP DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) a llows individual clients to obtain T CP/IP configuration at st art-up from a server . DHCP : If set to Disabled , the DHCP serv er will be disabled. If set to Enable , your ADSL Modem Series can assign IP addresses, an IP default gateway and DNS servers to W indows OS and o ...

  • LevelOne FBR-1161 - page 36

    33 4.3. Advanced Setup 4.3.1. Firewall Enable the firewall function, it provides Syn Flooding Attack, Ping of Death, T eardrop, Land Attack and Port Scanning protections 4.3.2. Routing If you h ave a nother router w ith a LAN-to-LAN connectio n, you may create a static routing on the router that is the gateway to Int ernet. # Item number Dest IP IP ...

  • LevelOne FBR-1161 - page 37

    34 A DD Route Destination IP A ddre ss This is the destination subnet I P address. IP Subnet Mask It is the destination IP addresses based on above destination subnet IP Gateway I P A ddress This is the gateway IP address to which pack ets are to be forwarded. Metric It represents the cost of transmission for routing purposes. The number need not b ...

  • LevelOne FBR-1161 - page 38

    35 4.3.3. NA T The NA T (Network Address Tr anslation - NA T , RFC 1631 ) is th e tran slation of t he IP address of a host in a packet. T he default setting is Dynam ic NAPT . It provides dynamic Network Address T ranslation capa bility between LAN and multip le WAN connections, and the LAN traffic is ro uted to a ppropriate WA N connectio ns base ...

  • LevelOne FBR-1161 - page 39

    36 DMZ The DMZ Host is a loc al computer exposed to the Internet. W hen setting a particular inte rnal IP address as the DMZ Host, all incoming packets w ill be checked by the Firewall and NA T algorithms then passed to the DMZ host, when a packet received does not use a port number used by any other Virtual Server entries. DMZ :  Disabled : As ...

  • LevelOne FBR-1161 - page 40

    37 by and point to your router , w hich then needs t o deliver all traffic to t he pri vate IP addresses used by your PCs. Please see the WA N configuration section of this m anual for more information on NA T . The device can be configured as a virtual server so th at remote users accessing services such as Web or FTP s ervices via the public (WAN ...

  • LevelOne FBR-1161 - page 41

    38 IP Address Mapping Rule Index : Choose the rule numbe r . Rule T y pe : One-to-one : This is the mode maps one loca l IP address to one global IP address. Note that port numbe rs do not change for the One-to-one NA T mapping type. Many-to-One : This is the mode maps multiple local IP addresses to one global IP address. This is equivalent to Many ...

  • LevelOne FBR-1161 - page 42

    39 Local End IP : This is the end Inside Local IP Add ress (ILA). If your rule is for all local IP addresses, then enter 0.0.0.0 as the Loca l S tart IP address and 255.255.255.255 as the Local End IP address. This field is N/A for One-to-one a nd Server mapping types. Public S t art IP : This is th e starting Inside Public IP Address. Enter 0.0.0. ...

  • LevelOne FBR-1161 - page 43

    40 4.3.4. A DSL A DSL Mode : The default setting is Auto Sync-UP . This mode will automatically detect your ADSL, ADSL2+, ADSL2, G .dmt, G .lite, and T1.413. But in some area, multimode cannot detect the ADSL li ne code well. If it i s t he ca se, p lease adjust the ADSL line co de to G .dmt or T1.413 first. If it still fails, plea se try the other ...

  • LevelOne FBR-1161 - page 44

    41 4.4. A ccess Management 4.4.1. A CL Access Control Listing allows you to determine which services/protocols can access which ADSL Modem Series interface from which computers. A CL : Activated to enable A CL f unction A CL Rule Index : Select ind ex from the drop down list box to create ACL rule. A cti ve : Select Y es to enable this ACL rule. Se ...

  • LevelOne FBR-1161 - page 45

    42 4.4.2. IP Filter Y o u may use telnet or W eb to remotely m anage the ADSL Router . User just needs to enable T elnet or W eb a nd giv e it an IP address t hat want to access the ADSL Router . Th e de fault IP 0.0.0.0 allows any client to use this service to rem otely manage the ADSL Router . IP Filter Set Editing IP filter Set Index : This is i ...

  • LevelOne FBR-1161 - page 46

    43 IP Filter Rule Editing IP Filter Rule Index : This is item number A cti ve : Select Y es from the drop down list box to enable IP filter rule. Source IP A ddre ss : The source IP address or range of p ackets to be monitored. Subnet Mask : It is the dest ination IP addresses based on above destination subnet IP Port Number : This Port or Port Ran ...

  • LevelOne FBR-1161 - page 47

    44 4.4.3. SNMP Simple Network Management Protoco l (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. A DSL Mod em series supports SNMP agent functionality which allows a manager station to manage and monitor the router through the ne twork. Get Community : T ype t ...

  • LevelOne FBR-1161 - page 48

    45 4.4.4. UPnP UPnP of fers peer-to-peer network connectivity for PCs and other network devices, alo ng with control and data transfer between devices. UPnP of fers many advantages for users running NA T routers through UPnP N A T Tr aversal, and on supported systems makes tasks such as port forwarding much easier by letting the application control ...

  • LevelOne FBR-1161 - page 49

    46 4.4.5. DDNS The Dynamic DNS function a llows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a static IP address to use a domain name. This is especially useful fo r hosting servers via your ADSL connection, so that anyone wishing to connect to you ma y use your domain name, rather than havin ...

  • LevelOne FBR-1161 - page 50

    47 4.5. Maintenance 4.5.1. A dministra tor In f actory set ting, t he default password is admin, and that for us er is a lso password. Y o u can change the default password to ensure that someone cannot adjust your settings without your permission. Every time you change your password, please record the p assword and keep it at a safe place. New Pas ...

  • LevelOne FBR-1161 - page 51

    48 4.5.2. Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network T ime Protocol (SNTP) to get the current time from an SNTP server outside your network. Choose your local time zone. After a successful connection to the Internet, the router will retrieve the correct local time from the S NTP server you hav ...

  • LevelOne FBR-1161 - page 52

    49 4.5.3. Firmware Y o ur router ’s “ firmware” is the software that allows it to operate and provides all its functionality . Think o f your route r a s a dedicat ed computer , an d the firmware as the software it ru ns. Over time th is software may be improved a nd mod ified, and your router allows you t o upgrade the software it runs to ta ...

  • LevelOne FBR-1161 - page 53

    50 4.5.4. SysRest art Click SysRestart wi th opt ion Current Settings to reboot your router (and re store your last saved configuration). If you wish to restart the router using the factory default settings (for example, af ter a firmware upgrade o r if y ou have saved an incorrect co nfiguration), select Factory Default Settings to reset to factor ...

  • LevelOne FBR-1161 - page 54

    51 4.6. St atus 4.6.1. Device Info Device Information Firmware version : This is the Firmware version MAC A ddress : This is the MAC Address LAN IP Address : LAN port IP address. Sub Net Mask : LAN port IP subnet mask. DHCP Server : LAN port DHCP role - Enabled, Relay or disab led ...

  • LevelOne FBR-1161 - page 55

    52 W AN Virtual Circuit : There are eight groups of PVC can be defined. St atus : “Not connected” or “Connected” Connection T y pe : Name of the WAN connection. IP Address : WAN port IP a ddress. Subnet mask : WA N port IP subnet mask. Default Gateway : The IP address of the default gateway . DNS Server : WAN port DHCP role - Enabled, Relay ...

  • LevelOne FBR-1161 - page 56

    53 4.6.2. System Log Display system logs accumulated up to the present time. Y ou can trace historical information with this function. ...

  • LevelOne FBR-1161 - page 57

    54 4.6.3. St atistics Read-only information he re i ncludes port s tat us and packet speci fic st atistics. Also prov ided are "T ransmit S tatistics" and "Receive S tatistics". Ethernet Interface : This field displays the type of port T ransmit Frames : This field displays the number of frames transmitted in the last second. T ...

  • LevelOne FBR-1161 - page 58

    55 A DSL T ransmit tot al PDUs : This field displays the number of total PDU transmitted in the last second. T ransmit tot al Error Count s : This field display s the number of tota l error transmitted in the last second. Receive tot a l PDUs : This field displays the number of total PDU received in the la st second. Receive tot al Error Count s : ...

Manufacturer LevelOne Category Router

Documents that we receive from a manufacturer of a LevelOne FBR-1161 can be divided into several groups. They are, among others:
- LevelOne technical drawings
- FBR-1161 manuals
- LevelOne product data sheets
- information booklets
- or energy labels LevelOne FBR-1161
All of them are important, but the most important information from the point of view of use of the device are in the user manual LevelOne FBR-1161.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals LevelOne FBR-1161, service manual, brief instructions and user manuals LevelOne FBR-1161. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product LevelOne FBR-1161.

Similar manuals

A complete manual for the device LevelOne FBR-1161, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use LevelOne FBR-1161 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of LevelOne FBR-1161.

A complete LevelOne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual LevelOne FBR-1161 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the LevelOne FBR-1161, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the LevelOne FBR-1161, that we can find in the current document
3. Tips how to use the basic functions of the device LevelOne FBR-1161 - which should help us in our first steps of using LevelOne FBR-1161
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with LevelOne FBR-1161
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of LevelOne FBR-1161 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning LevelOne FBR-1161?

Use the form below

If you did not solve your problem by using a manual LevelOne FBR-1161, ask a question using the form below. If a user had a similar problem with LevelOne FBR-1161 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)