Manual Hobart 4822

8 pages 1.01 mb
Download

Go to site of 8

Summary
  • Hobart 4822 - page 1

    701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com F-35109 (July 2005) MODEL 4822 CHOPPER ML-136125 ML-136126 ...

  • Hobart 4822 - page 2

    – 2 – © HOBART, 2005 Installation, Operation and Care of MODEL 4822 CHOPPER SA VE THESE INSTRUCTIONS GENERAL The 4822 Chopper uses a 1 1 / 2 horsepower motor. It will grind 16 lbs. per minute, first cutting, through a 1 / 8 " plate. The 4822 Chopper, with funnel-shaped cylinder, will grind 20 to 22 lbs. per minute, first cutting, through ...

  • Hobart 4822 - page 3

    – 3 – INST ALLA TION UNPACKING Remove the carton from around the machine. Remove the four bolts holding the machine to the skid. Unpack the chopper cylinder assembly. Immediately after unpacking the chopper, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the ca ...

  • Hobart 4822 - page 4

    – 4 – CLEANING WARNING : UNPLUG CHOPPER POWER CORD BEFORE CLEANING. The chopper must be thoroughly cleaned and sanitized after installation and before being placed into service. Cleaning Supplies (Not Provided) Recommended cleaning and sanitizing supplies include: • A 12" handle nylon brush that will slide through the cylinder • A two ...

  • Hobart 4822 - page 5

    – 5 – ASSEMBL Y Check to assure the hub and hub drive are clean and clear of any obstruction. Insert the cylinder assembly with a slight twisting motion toward the left. The cylinder stop pin will contact the side of the hole that receives it. Tighten the thumb screw. NOTE : Upon disassembly it is only necessary to loosen the thumb screw about ...

  • Hobart 4822 - page 6

    – 6 – MAINTENANCE WARNING : UNPLUG CHOPPER POWER CORD BEFORE CLEANING, SERVICING OR REMOVING PARTS. REPLACE PARTS BEFORE USE. MACHINE CLEAN UP The machine should be thoroughly cleaned at the end of an operating day or after being idle for an extended period of time. Refer to CLEANING for proper procedure. HUB AND CYLINDER DRAIN Hub Drain A drai ...

  • Hobart 4822 - page 7

    – 7 – NO TES ...

  • Hobart 4822 - page 8

    – 8 – FORM 35109 (July 2005) PRINTED IN U.S.A. NO TES ...

Manufacturer Hobart Category Food Processor

Documents that we receive from a manufacturer of a Hobart 4822 can be divided into several groups. They are, among others:
- Hobart technical drawings
- 4822 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart 4822
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart 4822.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart 4822, service manual, brief instructions and user manuals Hobart 4822. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart 4822.

Similar manuals

A complete manual for the device Hobart 4822, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart 4822 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart 4822.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart 4822 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart 4822, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart 4822, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart 4822 - which should help us in our first steps of using Hobart 4822
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart 4822
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart 4822 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart 4822?

Use the form below

If you did not solve your problem by using a manual Hobart 4822, ask a question using the form below. If a user had a similar problem with Hobart 4822 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)