Manual Craftsman 113.29931

8 pages 0.26 mb
Download

Go to site of 8

Summary
  • Craftsman 113.29931 - page 1

    Owner's Manual II:RRFTSMRN'I RAILS AND FENCE SYSTEM FOR CRAFTSMAN 10 in. TABLE SAWS MODEL NOS. 315.228310, 315.228410, 315.228510, 113.299310, 113.299410, 113.299510 Item No. _929993 TABLE SAW NOT INCLUDED Save this manual for future reference. _, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of thi ...

  • Craftsman 113.29931 - page 2

    READ ALL INSTRUCTIONS • READ THESE INSTRUCTIONS AND THE INSTRUCTIONS FOR YOUR TABLE SAW THOROUGHLY before using accessories. KNOW YOUR POWER TOOL. Read the owner's manual for the Table Saw carefully. Learn the saw's applications and limitations as well as the specific potential hazards related to this tool. KEEP THE WORK AREA CLEAN. Clu ...

  • Craftsman 113.29931 - page 3

    REMOVING THE SWITCH AND RAILS • Remove the front rail end caps. • Under the front rail, loosen the switch screws and slide the switch off of the rail. See Figure 2. Note: Do not remove the switch screws completely. Loosening the screws will allow you to slide the switch off the front rail and the switch will be ready to install on the new front ...

  • Craftsman 113.29931 - page 4

    INSTALLING THE REAR RAIL A'_ WARNING: Front and rear rails must be carefully aligned to reduce the risk of kickback, which can cause serious injury. • From the carton, remove the rear rail and the following hardware: Right and left end caps for rear rail 2 screws (5/32-32 x 1/2 in.) for end caps Note: The square head bolts, washers, and hex ...

  • Craftsman 113.29931 - page 5

    INSTALLING THE FRONT RAIL • Locate the front rail and the following hardware: Right and left end caps for front rail 2 screws (5/32-32 x 1/2 in.) for end caps • Set aside the end caps and two screws until the switch has been installed. Note: The square head bolts, washers, and hex nuts shown at the bottom of figure 6 should still be on the tabl ...

  • Craftsman 113.29931 - page 6

    • Insert the two remaining pan head screws into holes in the fine adjustment knob bracket. • Attach the fine adjustment knob bracket to the bottom of the fence head on the right or the left side of the fence handle. Securely tighten the two screws. BRACKET SCREWS _ _ Fig. 9 MOUNTING THE SWITCH • Locate the switch assembly, The fasteners shoul ...

  • Craftsman 113.29931 - page 7

    ALIGNING THE RIP FENCE AND FRONT RAIL • The rip fence scale indicator is installed on the right side of the rip fence but can be removed and rein- stalled on the left side if needed. If a cutting operation • requires placing the rip fence on the left side of the blade, and you find relocating the indicator necessary, simply unscrew and re-attac ...

  • Craftsman 113.29931 - page 8

    CHECKING RIP FENCE AND. BLADE ALIGNMENT The rip fence is self-aligning but should be checked before first use. _. WARNING: Failure to align the rip fence to the blade can cause jams and kickback, resulting in serious personal injury. • Slide the rip fence to the miter gauge groove, which is parallel to blade. Do not lock the rip fence. • Place ...

Manufacturer Craftsman Category Saw

Documents that we receive from a manufacturer of a Craftsman 113.29931 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 113.29931 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 113.29931
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 113.29931.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 113.29931, service manual, brief instructions and user manuals Craftsman 113.29931. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 113.29931.

Similar manuals

A complete manual for the device Craftsman 113.29931, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 113.29931 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 113.29931.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 113.29931 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 113.29931, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 113.29931, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 113.29931 - which should help us in our first steps of using Craftsman 113.29931
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 113.29931
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 113.29931 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 113.29931?

Use the form below

If you did not solve your problem by using a manual Craftsman 113.29931, ask a question using the form below. If a user had a similar problem with Craftsman 113.29931 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)