English dropdown-ico

Manual Brother DR-3200

11 pages Not applicable
Download

Go to site of 11

Summary
  • Brother DR-3200 - page 1

    BROTHER ® HL-5300 SERIES • TN650 TONER CAR TRIDGE REMANUF ACTURING INSTRUCTIONS BROTHER ® TN650 TONER CAR TRIDGE © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information. Unaut ...

  • Brother DR-3200 - page 2

    Released in April 2009, the Br other HL -5300 series printer is based on a new 32ppm, true 1200 DPI laser engine. These machines hav e a first page out in less than 8.5 seconds and come standard with 1 6 or 32Mb of memor y , depending on the machine. The HL -5300 series also hav e built-in duplexing. Our HL -53 70 machine came with a TN620 car trid ...

  • Brother DR-3200 - page 3

    BASIC BROTHER PRINT THEOR Y As with previous Br other car tridges, the wast e toner is repelled out of the drum car tridge and picked up b y the dev eloper rolle r in the toner cartridge and brought back into supply chamber . That is why there will alwa ys be a good amount of toner left in the supply chamber when the car tridge is finished. This re ...

  • Brother DR-3200 - page 4

    1. V acuum the ext erior of the car tridge. Remo ve the fill plug from the t oner car tridge. Dump the remaining toner and vacuum/blow out the cartridge. Even though the gears are cov ered on these car tridges, we ha ve f ound it best to k eep one hand ov er the gear side to pr otect them. 2 On the non-gear side of the dev eloper roller , remove th ...

  • Brother DR-3200 - page 5

    5. The reset gear is spring-loaded and must be positioned correctly for the print er to accept a ne w car tridge. Our printer came with a TN620 starter car tridge that had a reset gear installed so all car tridges would be able to be recy cled. 6. Remo ve the black plastic spacer fr om the dev eloper roller shaf t. 7 . Remo ve the E-Ring. BRO THER ...

  • Brother DR-3200 - page 6

    8. Remo ve all the remaining gears. Do not lose the reset gear spring! 9. On the gear side of the dev eloper roller , press in on the locking tab and rotate the de veloper r oller lock up. BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark names and artwork are property of thei ...

  • Brother DR-3200 - page 7

    1 0. Remo ve the dev eloper roller . Vacuum the doct or blade and foam f eed r oller clean. Until new blades are a vailable, we do not recommend that the doctor blade be remo ved or the dev eloper roller f elt seals disturbed. The doctor blade can be easily cleaned by first blowing off the excess t oner and then wiping down, using a lint-free cloth ...

  • Brother DR-3200 - page 8

    13. Install the non-gear side axle plat e. Make sure the clear plastic plug f or the optical sensor is locked in the pr oper posit ion. Clean the gears making sure that they ha ve no t oner on them. This is a good time to also check the gear shafts to make sure there is enough grease. If the shaf ts appear dr y , or the grease is contaminated with ...

  • Brother DR-3200 - page 9

    15. Depending on the cartridge you hav e, set the reset gears as shown: For the TN620 . For the TN650 . BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility ...

  • Brother DR-3200 - page 10

    1 6. Install the gear cov er plate and two scre ws: For the TN620 . For the TN650 . 1 7 . On the non-gear side, install the outer axle plate co ver and screw . 18. Fill the car tridge with black toner f or Bro ther 5300 series. BRO THER HL-5300 SERIES • TN650 T ONER CARTRIDGE REMANUF ACTURING INSTRUCTIONS © 2010 UniNet Imaging Inc. All trademark ...

  • Brother DR-3200 - page 11

    19. R eplace the fill plug. Wipe the car tridge down to remo ve an y remaining toner dust. 20. Install the dev eloper roller co ver . TEST P AGES 1. Press the “GO” Button 1x with the fr ont cov er closed and the "READ Y" light on. 2. A test sam ple page will print 3. Press the “GO” Button 2x with the fr ont cov er closed and the & ...

Manufacturer Brother Category Printer drum

Documents that we receive from a manufacturer of a Brother DR-3200 can be divided into several groups. They are, among others:
- Brother technical drawings
- DR-3200 manuals
- Brother product data sheets
- information booklets
- or energy labels Brother DR-3200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Brother DR-3200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Brother DR-3200, service manual, brief instructions and user manuals Brother DR-3200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Brother DR-3200.

Similar manuals

A complete manual for the device Brother DR-3200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Brother DR-3200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Brother DR-3200.

A complete Brother manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Brother DR-3200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Brother DR-3200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Brother DR-3200, that we can find in the current document
3. Tips how to use the basic functions of the device Brother DR-3200 - which should help us in our first steps of using Brother DR-3200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Brother DR-3200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Brother DR-3200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Brother DR-3200?

Use the form below

If you did not solve your problem by using a manual Brother DR-3200, ask a question using the form below. If a user had a similar problem with Brother DR-3200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)