-
Canon imageFormula CR-80 - page 1
Please read this manual before operating this scanner . Instructions ...
-
Canon imageFormula CR-80 - page 2
2 Connecting the Scann er to a Computer Connect the CR-50/80 to a computer as fol lows. Make sure to install the software before connectin g the scanner to a computer. • If you connect the computer and turn ON the CR-50 /80 before installing the softwar e, the following wizard screen appears. If this happens, click [Cancel], turn OFF the CR-50/80 ...
-
Canon imageFormula CR-80 - page 3
3 READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE CANON SOFTWARE LICENSE AGR EEMENT IMPORTANT-READ THIS AG REEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT. This legal document is a license agreement between you and CANON ELECTRONICS INC. ( “Canon”). ...
-
Canon imageFormula CR-80 - page 4
4 FCC REGULATIONS (For 120V model) Check Reader, Mode l M111101 /M111102 This device complies with Part 15 of the FCC Rules. Operation is subject to the f ollowing two conditio ns: (1) This device may not cause harmful interferen ce, and (2) this device mu st accept any interference received, including inte rference that may cause undesired operati ...
-
Canon imageFormula CR-80 - page 5
5 Tradem arks • Canon and the Canon logo are registered trademarks, of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of CANON ELECT RONICS INC. • Microsoft, Windows, Windows XP, Windows Vista, a nd Windows 7 are registered trademarks or trademarks of Mic r ...
-
Canon imageFormula CR-80 - page 6
6 INTRODUCTION Thank you for purchasi ng the Canon Check Reader CR-50/80. Please read this manua l thoroughly before using the mac hine in order to familiarize yourself with its capab ilities, and to make the most of its many functions. Manuals for the CR-50/80 The following manuals are provided wit h the CR-50/80. Be su re to read these manuals th ...
-
Canon imageFormula CR-80 - page 7
7 Table of Contents Connecting the Scanner to a Compu ter............. ............. ............. ........ 2 INTRODUCTION ....... .......... ........... .......... ........... .......... ................ ...... 6 Manuals fo r the CR-5 0/80 ............. ........... .......... ............. ......... 6 Symbols Used in This Ma nual .... ........... ...
-
Canon imageFormula CR-80 - page 8
8 Maintenanc e ........... ............. ........... .......... ............. ........... .......... ....... 45 Daily Cleaning .................. ....................... ........................ ............. 4 5 Cleaning the M ain Unit .. ............. ........... ............. ........... ......... 45 Cleaning the Inside of the Scanne r ......... ...
-
Canon imageFormula CR-80 - page 9
9 Important Safety Instructions Handling WARNING ■ Never install and operate the scanner near flammable substa nces, such as alcohol, paint t hinner, benzene, or any other t ype of volatile solution. ■ Never damage or modify the power cord, and never place heavy objects on the power cord. ■ Always make sure that your ha nds are dry when you a ...
-
Canon imageFormula CR-80 - page 10
10 ■ Keep the area around the power outlet clear of all obstacles so you can disconnect the power cord easily at all times. ■ Never spill water or volatile solutions (alcohol, benzene, paint thinner) into the scanner . Doing so may cause a fire or electr ical shock. ■ When the scanner is not being used for a long period of time, disconnect th ...
-
Canon imageFormula CR-80 - page 11
11 Power Supply • Connect only to a power outlet of the ra ted voltage and power supply frequency (either 120V, 60 Hz or 2 20-240V, 50/60 Hz, depending o n your region). • Make sure that the scanner is connected to an indepen dent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cord, make ...
-
Canon imageFormula CR-80 - page 12
12 Introduction to the CR-50/80 This chapter describes the features of the CR-50/80 scanner, what comes packaged in the box, an d the names and functions o f parts on the scanner. The Canon Check Rea der CR-50/80 is a scanner with magneti c heads that can read che cks and other documents that are printed with MICR (Magnetic Ink Character Recognitio ...
-
Canon imageFormula CR-80 - page 13
13 Make sure that you have everything shown below. Check every item you have removed from the box. If any items are missing, contac t your local authorized Canon dealer. NOTE Items included in this package may change without any notice. Packaging: What Is in the Box? CR-50/80 Setup Disc Power Cord *1 Warranty Card *2 USB Cable User Registration Car ...
-
Canon imageFormula CR-80 - page 14
14 This section describes the na mes and functions of each part. Before you connec t the CR-50/80, f amiliarize yourself with it s par ts and their function s. Front View Part Names Document Eject Opening Paper Thickness Adjustment Dial Adjust the gap between the separation roller and feeding roller to the thickness of the paper being fed. (See “ ...
-
Canon imageFormula CR-80 - page 15
15 Ink Cartridge The ink cartridge is not included, and must be purchased separately. (See “About the Ink Cartridge,” on p. 24.) Print Position Adjustment Lever Adjusts the print position. (See “Setting the Ink Cartridge and Adjusting the Print Position,” on p. 24.) Lock Lever Locks the ink cartridge in place. Ink Absorber Absorbs any ink t ...
-
Canon imageFormula CR-80 - page 16
16 Rear View CAUTION To avoid overheating and causing a fire, never block the air vents on the back of the scanner. Connectors/Power Switch Units: millimeters (units in parenthesis are inches) Reading Unit (Access Hatch) Open to clear paper jams or clean the scanner. (See “Clearing Paper Jams,” on p. 40.) Connectors/ Power Switch Power Switch T ...
-
Canon imageFormula CR-80 - page 17
17 Preparation Before Use This chapter describes how to prepare the scanner to sc an documents. Perform the following step s to set up the CR-50/80. R efer to the section for each step f or details about that step. A Check your o perating env ironment. (S ee “Checki ng Your Operatin g Environm ent,” on p. 18.) B Install the so ftware. (See “I ...
-
Canon imageFormula CR-80 - page 18
18 The following computer system re quirements are recommended for using the CR-50/80. Operating Systems: • Microsoft Windows XP (32bit) SP3 or later • Microsoft Windows XP (64bit) SP2 or later • Microsoft Windows Vista (32/64bit) SP1 or later • Microsoft Windows 7 (32/64bit) Specifications: • CPU: Intel Core2 Duo 1.8 GHz or faster • Me ...
-
Canon imageFormula CR-80 - page 19
19 The following software application is provided on the setup disc that is packaged with the scanner. Make sure to open and read the Readme.txt file on th e setup disc before installing the software. Scanning Utility Canon Scanning Utility is an applica tion that provides scanning, file saving, image viewing, printi ng, and various other fun ction ...
-
Canon imageFormula CR-80 - page 20
20 D Click [Acc essories ], and then cl ick [Run]. E Enter “D: SU80set up.exe” in the [ Open] field s, and then click [OK]. Installation starts. F Follow the instructio ns on the scre en to complete the installatio n. IMPORTANT The computer may need to be restarted, after the installation, depending on the operating system. If this is necessa ...
-
Canon imageFormula CR-80 - page 21
21 The only wa y to connect the scanner to your compute r is with a U SB cable. IMPORTANT • Be sure to u se the USB cable bundled with the scanner or a Hi-Speed USB 2.0 compatible cable with the length less than 5 m. • When the application is running, do not turn the scanner O FF or unplug the interface cable. • Do not conn ect multiple CR-50 ...
-
Canon imageFormula CR-80 - page 22
22 Connecting the Power Cord Connect the power cord. Make sure to use only the power cord provided with the scann er. WARNING When connecting the power cord, follow these precautions. Failure to do so may cause a fire or electrical shock. • Never grasp the power plug when y our hands are wet. • Never plug the scanner into a multi plug power str ...
-
Canon imageFormula CR-80 - page 23
23 IMPORTANT • When you tu rn ON the power, the power LED lights and remains lit. • If th e scanner does not work, there is a problem with the sca nner. Turn OFF the power, and contact your local authorized Canon dealer or service representative to have the scanner serviced. WARNING If you hear strange sounds, detect smoke or abnormal heat, sen ...
-
Canon imageFormula CR-80 - page 24
24 This section describes how to prepare the ink cartridge so that yo u can use the imprinter to print text on scanned documents. About the Ink Cartridge The ink cartridge is not included with the scanner. Purchase an ink cartridge separa tely, as sho wn below. Manufacturer : Hewlett Packard Ink Cartridge Blue : C6602B (Canon#3693A002) Ink Cartridg ...
-
Canon imageFormula CR-80 - page 25
25 C Remove the i nk cartridge from its ba g. IMPORTANT Do not touch the ink cartridge contacts. This can cause a bad elec trical contact and reduced print quality. D Grasp the ta g and then pe el off the tape covering the ink jet nozzle. IMPORTANT Do not touch the ink jet nozzle or contacts after peeling off the tag and tape. E Place the ink c art ...
-
Canon imageFormula CR-80 - page 26
26 NOTE Do not use more than one cartridge by rotation. If you do so, application s cannot check the ink level precisely. F Push down the ink cartridge until it clicks in to place. IMPORTANT Make sure that the ink cartridge lock lever locks the ink cartridge into the correct position. G Squeeze the Print Position Adj ustment Lever and move it to ad ...
-
Canon imageFormula CR-80 - page 27
27 H Carefully replac e the Imprinter Cover. I Gently close the Maintenanc e Cover unti l it clicks in to place. ...
-
Canon imageFormula CR-80 - page 28
28 Software This chapter describes how to use the Scanning Utility. This section describes how to start u p the Scanning Utility so that you can use the scanner. Read the Help files for the Scanni ng Utility for information on ho w to use it. How to Use the Scanning Utility This section describes the procedure for using the Scanning Utility. Read t ...
-
Canon imageFormula CR-80 - page 29
29 NOTE The basic operation of the Scanning Utility is noted in the Scanning Utility help file. On the [Help] menu, click [Help] to view the explanation. D Select [Scanner Set ting] from the [File] menu. The Settings dialog box appear s. E Set the scan cond itions and click [OK]. NOTE For information about the settings for the scan conditions, clic ...
-
Canon imageFormula CR-80 - page 30
30 G When scanning is finished, clic k [Exit] on the [File] menu to quit the Scanning Utility. This section describes how to uninstall the Scanning Utility. IMPORTANT Be sure to log on as the Administrator. A Click [Start ], and then click [Contro l Panel]. Uninstalling the Software ...
-
Canon imageFormula CR-80 - page 31
31 B Click [Pro grams], and t hen click [Pr ograms and Fea tures]. NOTE Depending on the status of your computer, the following screen may be displayed. In that case, double-click the [Programs and Features] icon. C Select th e software that you want to r emove from th e list in the dialog bo x, and then c lick [Uninsta ll]. ...
-
Canon imageFormula CR-80 - page 32
32 NOTE When the [User Account Control] dialog box appears, click [Continue]. IMPORTANT If you uninstall the “Scanning Utility for CR-50/80” you also need to uninstall the “Canon Driver for CR-50/80.” D The [Confirm F ile Deletion] dialog box appears. If you selected “Canon Driver fo r CR-50/80,” the above dialog box appears. E Click [Y ...
-
Canon imageFormula CR-80 - page 33
33 Document Feedi ng and Scanning This chapter describes precautions regarding docume nts that can be handled on this sc anner and scanning opera tions. This section describes the types of documents that can be used and how to place them. CAUTION Treat the documents carefully. The paper edges may cut your fingers. Document The CR-50/80 can feed a w ...
-
Canon imageFormula CR-80 - page 34
34 NOTE • Note that mixin g documents of different thickness may cause a malfunction during feeding. • Curled, wrinkled, or fo lded documents may cause an error. If this happens, straighten out the curls, or reduce the number of documents loaded. Using Infrared Double Feed Detection The double feed detection function t hat the scanner is equipp ...
-
Canon imageFormula CR-80 - page 35
35 Placing Documents Note the following poin ts when placing document s on the scanner. • Place the front of the document toward you. • A maximum of 50 documents or a document stack no higher than 5 mm (0.2") can be load ed at one time. • Move the stopper to the edge of the document in the document tray in acc ordance with the doc ument. ...
-
Canon imageFormula CR-80 - page 36
36 Scan Procedure A Pull out the docume nt feed tray. B Carefully al ign the edges of the docum ent. C Load the docu ments with thei r front sides facing right and with their edges f lush against the document load mark. D Adjust the Eject Stopper in ac cordance wi th the documen t. E Instruct s canning to st art from the software applic ation. NOTE ...
-
Canon imageFormula CR-80 - page 37
37 F Scanning s tarts. NOTE When printing with the imprinter, ink may get on the leading edge of the document because the documents are ejected onto the printed surfa ce. Confirming Proper Document Feeding Depending on the thickness of documents scanned with the CR-50/8 0 and the paper thickness settin g, d ouble feeds or feeding errors may occur. ...
-
Canon imageFormula CR-80 - page 38
38 NOTE For instructions on using the scanning utility, see “How to Use the Scanning Utility,” on p. 28. You can also refer to the scanning utility help in the [Help] menu. B Pull out the docume nt feed tray. C Load two documen ts with thei r edges flu sh against th e mark. D Adjust the position o f the eject stopper. (If necessa ry, see the di ...
-
Canon imageFormula CR-80 - page 39
39 NOTE If the sheets do not feed properly (they double-feed or no sheets are fe d), see “Adjusting the Separation Roller Gap,” on p. 52 to adjust for paper thickness. F Exit the scanning utility. ...
-
Canon imageFormula CR-80 - page 40
40 Troubleshooting This chapter describes the problems that might occur in the CR-50/80, and how to remedy them. The following causes and r emedies describe why your computer may not recognize the scanner. If paper has jammed, open the Maintenance Cover and remove the jammed paper. IMPORTANT Do not attempt to pull the jammed paper upwards or backwa ...
-
Canon imageFormula CR-80 - page 41
41 B While lower ing the dow n the OPEN leve r, open the rea ding unit. C Remove the pap er that has ja mmed. If the paper is jammed at the pickup area: Pull the paper forward and clear the jam from the Mainten ance Cover. If the paper is jammed at any other area: Pull the paper forward and clear the jam from the nearest opening. D Gently close the ...
-
Canon imageFormula CR-80 - page 42
42 E Gently close the Maintenanc e Cover unti l it clicks in to place. Check the following conditions, and take t he appropriate action. The power switch is not in the ON p osition. Turn the switch into the ON position. (See “ Turning ON the Power,” on p. 22.) The power cord is not connected into a po wer outlet. Connect the power cord into a p ...
-
Canon imageFormula CR-80 - page 43
43 If the document is not fe d properly or the detection functions do not work properly, remedy the problem by checking the following conditions. Feeding Trouble Condition A paper jam has occurred. Cause and Remedy • Check to make sure that the size an d thickness of the document are within the supported range of the scanner, and if the quality o ...
-
Canon imageFormula CR-80 - page 44
44 If there is a problem with the scanned imag e (the image is not sharp or stripes appear), one of the fol lowing conditions may be a probable cause. Check th e following conditions, and t ake the appropriate action. The scanning glass or rollers are dirty. If the scanning glass or rollers are dirty, the dirt will appear on the scanned image. Clea ...
-
Canon imageFormula CR-80 - page 45
45 Maintenance This chapter describes how to clean and maintain the scanner. To ensure high-quality image scan ning, regularly clean your CR-50/8 0 as described below. CAUTION • Before you cle an the scanner, turn OFF the scanner and computer, and disconnect the power cord from the power outlet. Otherwise, it may cause an electrical shock. • Ne ...
-
Canon imageFormula CR-80 - page 46
46 B While lower ing the ope n lever, open the readin g unit. WARNING Do not use flammable liquids to clean the scanner, including alcohol, benzene, or paint thinner. C Spin the rollers while wiping them cl ean with a firmly wru ng cloth damp ened with wate r or a mild dete rgent. There are 18 roller positions, as shown in the diagram below. NOTE ? ...
-
Canon imageFormula CR-80 - page 47
47 D Use cotton swabs to clean t he entire sca nning glass. There are two scan ning glass areas, o ne on eac h side. Use a cotton swab to wip e dirt from the entire su rface of ea ch. IMPORTANT Scratches on the scanning glass may cause marks on the images and c ould cause feeding errors. If there are scratches on the scanning glass, co ntact your l ...
-
Canon imageFormula CR-80 - page 48
48 Cleaning the Magnetic Heads If the magnetic heads are dirty, then MICR characters cannot be scanned correctly. Periodical ly, clean the magnetic heads with a commercially available audio head cle aner. A Hook your fi nger aroun d the open leve r and open th e maintenanc e cover. B Use a commercially available audio head cleaner to clean the magn ...
-
Canon imageFormula CR-80 - page 49
49 Cleaning the Ink Jet Nozzles Ink that collects around the ink jet nozzle s may stain your documents or cause the text to appear as sc ratched. Clean the area arou nd the ink jet nozzles periodicall y. Cleaning the ink jet nozzles is also e fficient action when the printed text becomes fa int. A Hook your fi nger aroun d the open leve r and open ...
-
Canon imageFormula CR-80 - page 50
50 F Carefully replac e the Imprinter Cover. G Gently close the Maintenanc e Cover unti l it clicks in to place. Make the following adjustments to mainta in scanning quality. Replacing the Ink Cartridge The ink cartridge needs to be replaced if the printed text becomes scratchy or faint even if you have cleaned the ink jet nozzle. Replace the ink c ...
-
Canon imageFormula CR-80 - page 51
51 A Hook your fi nger aroun d the open leve r and open th e Maintenance C over. B Remove the Imprin ter Cover. C Squeeze in bot h sides of the p rint positi on adjustmen t lever and move the pri nt cartridg e carriag e to its lowest position. D Push back the in k cartrid ge lock leve r in the dire ction of the arrow in the di agram below, an d pul ...
-
Canon imageFormula CR-80 - page 52
52 E Set the ink cartridge. For more information, see “Setting th e Ink Cartridge and Adjusting the Print Position,” on p. 24. F Carefully replac e the Imprinter Cover. G Gently close the Maintenanc e Cover unti l it clicks in to place. Adjusting the Separation Roller Gap If double feed should occur too often, adjust th e Separation Roller gap ...
-
Canon imageFormula CR-80 - page 53
53 B Pull out the docume nt feed tray. C Load two chec ks or check- stock pape r together. D Slide the two s heets throug h between th e feeding roller and the separa tion rolle r and stop at th e positio n shown below. NOTE If you were unable to slide both sheets th rough the gap between the rollers, turn the paper thickness adjustment dial counte ...
-
Canon imageFormula CR-80 - page 54
54 F Adjust th e gap betwee n the feeding roller an d the separat ion roller to opt imum width. While one sheet remains in place between the roller s, continuousl y attempt to slide t he se cond sheet (in front of the remaining sheet) t o the right, back t hrough the roller gap. Slowl y turn the paper thi ckness adju stment dial clockwise (right) j ...
-
Canon imageFormula CR-80 - page 55
55 Scan ner Speci fic atio ns AC Adapter Specific ations ■ Use th e rec ommen ded operat ing e nviron ment for th e ink cartr idge wh en usi ng the im printer. ■ You ca n us e the fu nctio ns no ted abov e if your sof tware sup ports th em. ■ These functi ons may not w ork depe nding o n your compute r’s capa bilitie s and th e sof tware y ...
-
Canon imageFormula CR-80 - page 56
56 Index A AC Adapter Specifications .................... ........................... 55 Adjusting the Print Position .............................................. 24 Amount loaded ................................................................. 35 C Cleaning Main unit .................................................................... 45 Cleani ...
-
Canon imageFormula CR-80 - page 57
57 P Paper Thickness Adjustment Dial .................................... 14 Power Connector .................................. ........................... 16 Power Cord ................................................................ 13, 22 Power Indicator .......................................................... ...... 14 Power Supply .......... ...
-
Canon imageFormula CR-80 - page 58
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-18 92, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE S UCCESS, NY 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA , ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61 , P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERF ...
Do you have a question concerning Canon imageFormula CR-80?
Use the form below
If you did not solve your problem by using a manual Canon imageFormula CR-80, ask a question using the form below. If a user had a similar problem with Canon imageFormula CR-80 it is likely that he will want to share the way to solve it.