Manual Canon RE-350

63 pages 0.53 mb
Download

Go to site of 63

Summary
  • Canon RE-350 - page 1

    1 RE-350 Control Interface Commands RE-350 V ideo V isualizer *+,;, VISU AL COMMUNIC ATION SYSTEMS v1.0 ...

  • Canon RE-350 - page 2

    2 1.0 Operations and Functions 1.1 Panel Diagrams ............................................................................................................. ................................ 3 1.2 Description of the Panel Functions ......................................................................................... ................. 4–8 1. ...

  • Canon RE-350 - page 3

    3 Operation Panel Rear Panel 1.1 Panel Diagrams 1.0 Operations and Functions Side Panel 32 33 34 35 36 37 PHASE SC MIC LEVEL MIC H 3 4 1 2 21 22 23 24 25 26 29 30 31 28 27 1 2 3 4 5 6 7 8 9 10 16 15 14 13 12 11 RS-232C AC Outlet AC Inlet OUT IN R L R L Audio Video EXT SYNC RG B RGB OUT ON ON OFF OFF SYNC 75 Ω S-Video 24/96 100/60 ID/0 ID/1 WHITE ...

  • Canon RE-350 - page 4

    4 Button/ Control Knob Key Function RS-232 CONTROL † (Button) Switches the mode from [O N -L INE ] Mode to [O FF -L INE ] Mode or from [O FF -L INE ] Mode to [O N -L INE ] Mode. In the [O FF -L INE ] Mode the RE-350 will send the “ Event Data Packet ” for ‘ Request on line ’ . In the [O N -L INE ] Mode or [N OTIFICA TION ] Mode the RE-350 ...

  • Canon RE-350 - page 5

    5 Button/ Control Knob Key Function B/W (Button) T oggles the video output between color and black & white. Detail (Control Knob) Adjusts the sharpness of the output video image. T urning to the right sharpens the image and turning to the left softens the image. EXP (Control Knob) Adjusts the exposure control. The RE-350 has an auto- IRIS funct ...

  • Canon RE-350 - page 6

    6 Button/ Control Knob Key Function External audio input ( 10 k Ω ) RCA ter minal 3 dB ~ -12 dB Audio output ( 1k Ω ) Composite video input ( BNC terminal 75 Ω ) Composite video output ( BNC terminal 75 Ω ) S-video in ( S-DIN connector 75 Ω ) S-video out ( S-DIN connector 75 Ω ) RGB OUT S-Video In/Out C-Video In/Out Audio In/Out Sync On ...

  • Canon RE-350 - page 7

    7 Function Sets the electronic shutter speed, RS232C communication bit rate and ID number of the RE-350 . Digital Switches [ RS232C communication speed] [Electronic shutter speed] [Identification number ( ID )] Note: The electronic shutter speed will be updated as soon as the digital switch is set. The communication speed switch and ID number switc ...

  • Canon RE-350 - page 8

    8 Button/ Control Knob Key Function SCp90 ° (switch) SCp (Control Knob) 3: 0 degree shift 4: 180 degree shift Sub-car rier phase will be adjustable 0 ~ 90 degree by this knob. Adjust the Horizontal video output phase ( 0 ~ 2 µ sec) on the base of the external signal. Hp (Control Knob) Audio V olume (slider) Audio Input SCp180 ° (switch) 1 : 0 de ...

  • Canon RE-350 - page 9

    9 1.3 Operational Procedures Over view 1.3.1 Procedure for using the Front Panel 1 2 3 4 With the shutter speed switch, set the proper shutter of the RE-350 . T ur n on the main power . Operate designated switches. T ur n of f the main power . 1. The power LED on the RE-350 will be turned on 2. Automatically the RE-350 will be initialized. 3. The W ...

  • Canon RE-350 - page 10

    10 1 2 3 4 5 6 7 With the shutter speed switch, set the shutter of the RE-350 . Set an ID number for this RE-350 using the DIP switches on the rear panel. Set communication speed for RS-232C I/F with the DIP switches on the rear panel. Properly connect the RE-350 to the PC with an approved serial cable. T ur n on the PC . (This operation may be don ...

  • Canon RE-350 - page 11

    11 Send designated commands to the RE-350 for control. Set the RE-350 to [O FF -L INE ] Mode. In order to put the RE-350 in [O FF -L INE ] Mode, the following two methods will be available: 1. Push the { RS-232 } button on the front panel. 2. The PC sends the [O FF -L INE ] command to the RE-350 . T urn of f the main power on the RE-350 . The RE-35 ...

  • Canon RE-350 - page 12

    12 1.3.3 Procedure for Using the Contr ol Knobs [O FF -L INE ] Mode [O N -L INE ] Mode [N OTIFICATION ] Mode Mode Meaning Adjusting the value of each control knob. The physical position of each control knob on the front panel is used to measure and adjust it's respective value. Setting the center tar get value for Auto-White Balance. The physi ...

  • Canon RE-350 - page 13

    13 1.3.4 Procedure for Using the {RS-232} Button Function of { RS-232 } button By pressing this button, toggles the RE-350's RS232C I/F from active to inactive for communication with the PC or another controller device. Once the RE-350 detects that the { RS-232 } button was pressed, the RE-350 will send an Event data packet to the PC through t ...

  • Canon RE-350 - page 14

    14 Communication mode [O FF -L INE ] Mode Input signal selection Document Camera Nega/Posi Positive White Balance Locked at the proper white balance Color / B&W Color Focus Stopped at the maximum focus point Zoom Stopped Document lights Of f Back light Of f Electronic shutter speed Depends upon the setting of the digital switches Communication ...

  • Canon RE-350 - page 15

    15 1.7 Packet Discrimination Code Assignment RS-232C Inter face Connection T ransmission Mode ................................................. Full Duplex T ransfer Speed ......................................................... 9600 bps or 2400 bps Star t Bit .................................................................. 1 bit Data Bit ...... ...

  • Canon RE-350 - page 16

    16 Header ID number FP data number Parameter 30h * *h * *h MSH LSH FP Data Packet Format (PC <— RE-350) In [N OTIFICA TION ] Mode, the RE-350 can notify the PC of the condition of each button and LED using this data packet. E-Response Data Packet Format (PC —> RE-350) When the PC receives the “ Event Data Packet ” from the RE-350 , th ...

  • Canon RE-350 - page 17

    17 1.9 The Operational Flow Char t PC Command The RE-350 is under operation. C-response There will be three kinds of communication flow between the RE-350 and the PC as follows: Flow Pattern 1: Command Communication Flow Pattern This flow will be applied when the PC sends a command to the RE-350 to request an operation. Flow Pattern 2: Event Packet ...

  • Canon RE-350 - page 18

    18 Flow Pattern 3: [N OTIFICA TION ] Mode Flow Pattern This flow is applied when the RE-350 is in [N OTIFICATION ] Mode to tell the PC the condition of the buttons and control knobs on the front panel of the RE-350 . FP Data Packet Command The PC will compare the curr ent FP data with the previous FP data to r ecog- nize which button's or cont ...

  • Canon RE-350 - page 19

    19 Zoom 1 Cons-Spd wide Zoom High speed Wide zoom 500 $10 $8* $00 $01 $00 2 Step wide Zooming Step feed wide zooming 2000 $10 $8* $00 $03 $00 3 Cons-Spd T ele Zoom High speed T ele zoom 500 $10 $8* $01 $01 $00 4 Step T ele Zooming Step feed tele zooming 2000 $10 $8* $01 $03 $00 5 Stop Zooming Stop zooming motor 500 $10 $8* $02 $00 $00 6 Access-to-Z ...

  • Canon RE-350 - page 20

    20 Select Input Signal 1 Select Document Video Output Camer a signal 500 $10 $8* $50 $00 $00 2 Select External video Output External signal 500 $10 $8* $50 $01 $00 Light on/off Contr ol 3 Lights On †† T ur n Light On 500 $10 $8* $58 $00 $00 4 Lights Of f †† T ur n Light Of f 500 $10 $8* $58 $01 $00 5 Backlight On †† T ur n Backlight On ...

  • Canon RE-350 - page 21

    21 Response without par ameter $A0 $8* $00 $00 $00 Read Zoom position $A0 $8* $10 $00 $** Status of Gr oup A $A0 $8* $20 $** $** Status of Gr oup B $A0 $8* $21 $** $00 Status of Button $A0 $8* $30 $** $** Status of WB contr ol knob $A0 $8* $40 $00 $** Status of EXP contr ol knob $A0 $8* $41 $00 $** Status of Detail contr ol knob $A0 $8* $42 $00 $** ...

  • Canon RE-350 - page 22

    22 2.4 Event Data Packet T able Request OFF Line $20 $8* $00 $01 $00 Request ON Line $20 $8* $00 $00 $00 Request ON line When the { RS-232 } button on the front panel is pushed and the RTS signal line from the PC is on, the RE-350 will send this “ Event Data Packet ” to the PC . If the RE-350 can receive the <Accepted> of the “ E-respon ...

  • Canon RE-350 - page 23

    23 2.5 E-response Data Packet T able E-response Description 1 byte 2 b yte 3 b yte 4 byte 5 b yte Header ID # EVENT# P ara(H) Para(L) Denied $B0 $8* $00 $01 $00 Accepted $B0 $8* $00 $00 $00 Accepted When the PC receives an “ Event Data Packet ” ( ‘ Request ON line ’ or ‘ Request OFF line ’ ) from the RE-350 , the PC should send this E-r ...

  • Canon RE-350 - page 24

    24 2.6 FP Data Packet T able FP data descr iption 1 b yte 2 byte 3 b yte 4 byte 5 b yte Header ID # EVENT# P ara(H) Para(L) Fr ont panel switch inf or mation $30 $8* $00 $** $** FP Data Packet When the RE-350 is in [N OTIFICA TION ] Mode, it will send the “ FP Data Packet ” to the PC . This tells the condition of each button and control knob ev ...

  • Canon RE-350 - page 25

    25 3.0 Descr iption Command Data P ac k et Wide Zoom: Constant Speed • Function: Moves the zoom lens in the wider direction at a constant speed. This operation will be stopped with the reception of the <Stop Zooming> command or if the zoom lens reaches the wide-end limit. • Timing of the “ C-response Packet ” sent to the PC: Right aft ...

  • Canon RE-350 - page 26

    26 T ele Zoom: Constant Speed • Function: Moves the zoom lens in the tele direction at a constant speed. This operation will be stopped with the reception of the <Stop Zooming> command or the zoom lens reaches the tele-end limit. • Timing of the “ C-response Packet ” sent to the PC: Right after the zoom lens star t to move. • The pa ...

  • Canon RE-350 - page 27

    27 Zoom: Stop • Function: Stops the movement of the zooming lens. • Timing of the “ C-response Packet ” sent to the PC: Right after the zoom lens stops to move. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time (msec): 500 millisecond • Command format: Header ID number Command Parameter MSH P ...

  • Canon RE-350 - page 28

    28 Header ID number Command Parameter MSH Parameter LSH $10 $ 8 * $ 0 4 $ 0 0 $ 0 0 Zoom: Request Position • Function: Requests the present position of the zoom lens from the RE-350. • Timing of the “ C-response Packet ” sent to the PC: Right after this command is accepted by the RE-350. • The parameter of the “ C-response Packet ” : ...

  • Canon RE-350 - page 29

    29 Header ID number Command Parameter MSH P arameter LSH $10 $ 8 * $ 0 5 $ 0 0 $ 0 0 Zoom W ide: Constant Speed w/ AF † • Function: Moves the zoom lens in the wider direction at a constant speed. This operation will be stopped with the reception of the <Stop Zooming> command or if the zoom lens reaches the wide-end limit. • Timing of th ...

  • Canon RE-350 - page 30

    30 Header ID number Command Parameter MSH P arameter LSH Focus Near: Constant Speed • Function: Moves the focus lens in the near direction at a constant speed. This operation will be stopped with the reception of the <Stop focusing> command or the focus lens reaches the near -end limit. • Timing of the “ C-response Packet ” sent to th ...

  • Canon RE-350 - page 31

    31 Header ID number Command Parameter MSH P arameter LSH $10 $ 8 * $ 1 2 $ 0 3 $ 0 0 Focus Near: Step • Function: Moves the focus lens in the near direction one step. This operation will be stopped automatically . • Timing of the “ C-response Packet ” sent to the PC: Right after the focus lens stops. • The parameter of the “ C-response ...

  • Canon RE-350 - page 32

    32 Header ID number Command P arameter MSH Parameter LSH $10 $ 8 * $ 1 3 $ 0 3 $ 0 0 Focus Far: Step • Function: Moves the focus lens in the far direction one step. This operation stops automatically . • Timing of the “ C-response Packet ” sent to the PC: Right after the focus lens stops • The parameter of the “ C-response Packet ” : ...

  • Canon RE-350 - page 33

    33 Header ID number Command P arameter MSH Parameter LSH $10 $ 8 * $ 2 0 $ 0 0 $ 0 0 OP A WB (Operate Auto-White Balance) • Function: Instr ucts the auto white balance to find the best white balance. • Timing of the “ C-response Packet ” sent to the PC: Right after having found out the best white balance point or , after 6 seconds, having f ...

  • Canon RE-350 - page 34

    34 Header ID number Command P arameter MSH Parameter LSH $10 $ 8 * $ 2A $ 0 0 $* * Exposure: Manual Access T o • Function: Sets a designated exposure position, which is determined by the parameter of this command. The result is the same as rotating the manual control knob on the fr ont panel. Note: The control knob ’ s physical position is not ...

  • Canon RE-350 - page 35

    35 Detail: Manual Access T o • Function: Sets a designated sharpness position, which is determined by the parameter of this command. The result is the same as rotating the manual control knob on the fr ont panel. Note: The control knob ’ s physical position is not updated by this command. This command simply modifies the target exposure default ...

  • Canon RE-350 - page 36

    36 Set Positive Mode † • Function: Sets the video output to normal (positive). (Also, the Auto-White Balance will be adjusted once.) • Timing of the “ C-response Packet ” sent to the PC: Right after this setting is done. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time (msec): 500 millisecond ...

  • Canon RE-350 - page 37

    37 Set Color Mode • Function: Sets the video output to color . • Timing of the “ C-response Packet ” sent to the PC: Right after this setting is done. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time (msec): 500 millisecond • Command format: Set B/W Mode • Function: Sets the video output to ...

  • Canon RE-350 - page 38

    38 Select External Video • Function: Selects the external video input signal. • Timing of the “ C-response Packet ” sent to the PC: Right after this setting is done. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time (msec): 500 millisecond • Command format: Header ID number Command Parameter M ...

  • Canon RE-350 - page 39

    39 Document Lights: Of f † • Function: T ur ns of f the Document Lights above the document table. (Also, the Auto-White Balance will be adjusted once.) • Timing of the “ C-response Packet ” sent to the PC: Right after turning of f the lights. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time ( ...

  • Canon RE-350 - page 40

    40 Backlight: Of f † • Function: T ur ns of f the document lights above the document table. (Also, the Auto-White Balance will be adjusted once.) • Timing of the “ C-response Packet ” sent to the PC: Right after turning of f the backlight. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time (mse ...

  • Canon RE-350 - page 41

    41 LED: Normal • Function: The LED indicated by the parameter data will be set to normal operation. This command is available in the [N OTIFICATION ] Mode. If the RE-350 receives this command from the PC in another mode, the RE-350 will send a “ C-response Packet ” with the Mode Error r esponse. • The available parameter value: LSH: $00 ~ $ ...

  • Canon RE-350 - page 42

    42 LED: On • Function: The LED indicated by the parameter data will be turned on. This command is available in the [N OTIFICA TION ] Mode. If the RE-350 receives this command from the PC in another mode, the RE-350 will send a “ C-response Packet ” with the Mode Err or response. • The available parameter value: LSH: $00 ~ $FF • Timing of ...

  • Canon RE-350 - page 43

    43 LED: Of f • Function: The LED indicated by the parameter data will be turned of f. This command is available in the [N OTIFICATION ] Mode. If the RE-350 receives this command from the PC in another mode, the RE-350 will send a “ C-response Packet ” with the Mode Err or response. • The available parameter value: LSH: $00 ~ $FF • Timing ...

  • Canon RE-350 - page 44

    44 LED: Blink • Function: The LED indicated by the parameter data will be made to blink. This command is available in the [N OTIFICATION ] Mode. If the RE-350 receives this command from the PC in another mode, the RE-350 will send a “ C-response Packet ” with the Mode Err or response. • The available parameter value: LSH: $00 ~ $FF • Timi ...

  • Canon RE-350 - page 45

    45 [O N -L INE ] Mode • Function: Sets the RE-350 to [O N -L INE ] Mode. • Timing of the “ C-response Packet ” sent to the PC: Right after this setting is done. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation time (msec): 500 millisecond • Command format: Header ID number Command P arameter MSH P ...

  • Canon RE-350 - page 46

    46 Header ID number Command Parameter MSH P arameter LSH $10 $ 8 * $ 7 0 $ 0 2 $ 0 0 [N OTIFICA TION ] Mode • Function: Sets the RE-350 to [N OTIFICATION ] Mode. • Timing of the “ C-response Packet ” sent to the PC: Right after this setting is done. • The parameter of the “ C-response Packet ” : $0000 fixed • The maximum operation t ...

  • Canon RE-350 - page 47

    47 Status of Group A • Function: T o get the status data of Group A from the RE-350 . • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : The bit assignment to each status to explain the RE-350 ’ s condition. D15 D14 D13 D12 D11 D10 ...

  • Canon RE-350 - page 48

    48 Note: 1 = ON 0 = OFF C MODE 1 and C MODE 0 explain the operational mode of the RE-350 as follows: MODE C MODE 1 C MODE 0 O FF -L INE – –– – O N -L INE 01 N OTIFICATION 10 not used 1 1 Status of Group B • Function: T o get the status data of Group B fr om the RE-350 . • Timing of the “ C-response Packet ” sent to the PC: Right aft ...

  • Canon RE-350 - page 49

    49 Status of the Buttons • Function: T o get the status of the buttons on the operation panel . • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : The bit assignment to each status to explain the RE-350 ’ s condition. D15 D14 D13 D ...

  • Canon RE-350 - page 50

    50 Status of EXP control knob • Function: Gets the position data of the EXP control knob. ( EXP = exposure) • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : MSH: $00 fixed LSH: $00 ~ $FF • The maximum operation time (msec): 100 m ...

  • Canon RE-350 - page 51

    51 Status of A WB result • Function: Gets the position data of the White Balance Manual control knob where Auto-White Balance is completed. • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : MSH: $00 fixed LSH: $00 ~ $FF • The maxi ...

  • Canon RE-350 - page 52

    52 Name of the Equipment • Function: Gets the code name of the equipment which is connected to the PC. The code name of the RE-350 is “ R1 ” . • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : MSH: fixed LSH: fixed The code name ...

  • Canon RE-350 - page 53

    53 Set to Special Mode 1 • Function: Lets the RE-350 transfer to Special Mode 1. The RE-350 will accept this command independently from its ID number . • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : MSH: $00 fixed LSH: $00 fixed ...

  • Canon RE-350 - page 54

    54 Set to Ser vice Mode • Function: Lets the RE-350 transfer to Ser vice Mode. The RE-350 will accept this command independently from its ID number . • Timing of the “ C-response Packet ” sent to the PC: Right after this command is received by the RE-350 . • The parameter of the “ C-response Packet ” : MSH: $00 fixed LSH: $00 fixed ? ...

  • Canon RE-350 - page 55

    55 5.1 RS-232C Control Cable Pin Assignment 5.0 Contr ol Cable Pin Assignments RE-350 RE-350 ...

  • Canon RE-350 - page 56

    56 RE-350 Control Cable Pin Assignments 9 Pin DSUB RS-232C RE-350 RE-350 ...

  • Canon RE-350 - page 57

    57 Note: RS-232C Specification allows cable length up to 15m, but it should be kept as shor t as possible. The following cables which have the above connections can be used: Apple System Peripheral 8 1.0m InMac 74415 (for Image W riter II) 1.8m RE-350 Control Cable Pin Assignments RS-232C for Macintosh™ Computers ...

  • Canon RE-350 - page 58

    58 Mark Duration period Min. Max. T1 - 300ms T2 0ms 200ms T3 10ms T4-T2 T4 10ms *1 6.1 R TS/CTS Flow Control T iming Char t PC SIDE SIGNAL Command C-Response RTS T1 T2 T3 T4 If the PC is ready to communicate with the RE-350 , the PC should set the RTS line to ON . The RE-350 will recognize that its RS-232C connector is connected to the PC . When th ...

  • Canon RE-350 - page 59

    59 Mark Duration period Min. Max. T5 (9600bps) 3.44ms 300ms (2400bps) 4.58ms 300ms T6 -- 1000ms T7 -- 200ms The PC can suspend the transmission of the “ C-response Packet ” data for the period less than 1000 milliseconds from the RE-350 by setting the RTS signal to OFF . PC SIDE SIGNAL Command T5 T6 T7 C- Response 6.2 R TS flow control timing c ...

  • Canon RE-350 - page 60

    60 Appendix A – Disk Inf or mation RE-350 Software Developer's Disk Installation Description: This disk contains one auto-extracting compressed file which once uncompressed contains 3 separate directories. The 3 directories are APP , 16BITSDK , and 32BITSDK . Within the APP director y is a Demo Application that was created using the document ...

  • Canon RE-350 - page 61

    61 re350.c RE-350 communications driver . re350.h Driver definitions. re350.obj Object file. re350dll.dll Dynamic Link Librar y . re350dll.mak Microsoft C/C++ V ersion 1.52 Project (NMAKE) example.c Sample Windows application. example.obj Object file example.exe Executable Windows Application example.def Module definition file. example.mak Microsof ...

  • Canon RE-350 - page 62

    62 RE-350 16bit Sample Code ( 16BITSDK ) Notes: 1) This example application was written and compiled with Microsoft C/C++ and SDK V ersion 1.52 (16 bits ONLY ). Open the project in Microsoft V isual C/C++ to edit and recompile. The DLL and example application are built separately . Y ou can use RE350DLL.DLL as is by impor ting the functions descri ...

  • Canon RE-350 - page 63

    63 RE-350 32bit Sample Code ( 32BITSDK ) Notes: 1) This example application was written and compiled with Microsoft C/C++ and SDK V ersion 4.0 (32 bits ONL Y). Open the project in Microsoft Visual C/C++ 4.0 to edit and r ecompile. 2) The RE-350 driver ( RE350.DLL ) is located in .EXAMPLERE350 and has been setup as a sub-project of EXAMPLE . It w ...

Manufacturer Canon Category Webcam

Documents that we receive from a manufacturer of a Canon RE-350 can be divided into several groups. They are, among others:
- Canon technical drawings
- RE-350 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon RE-350
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon RE-350.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon RE-350, service manual, brief instructions and user manuals Canon RE-350. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon RE-350.

Similar manuals

A complete manual for the device Canon RE-350, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon RE-350 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon RE-350.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon RE-350 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon RE-350, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon RE-350, that we can find in the current document
3. Tips how to use the basic functions of the device Canon RE-350 - which should help us in our first steps of using Canon RE-350
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon RE-350
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon RE-350 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon RE-350?

Use the form below

If you did not solve your problem by using a manual Canon RE-350, ask a question using the form below. If a user had a similar problem with Canon RE-350 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)