Manual Universal 1005

12 pages 0.16 mb
Download

Go to site of 12

Summary
  • Universal 1005 - page 1

    (E-TBT -HB-1005) 7368.D For assistance in installing, using, or maintaining the TRANSITION Networks Model 1005 Ethernet™ Repeater Hub, contact TRANSITION Networks T echnical Support at: (800) 260-1312 or contact your local distributor . Model 1005 24-Port Ethernet Hub 21 MODEL 1005 REPEA TER HUB SPECIFICA TIONS Standards IEEE 802.2, 802.3 Physica ...

  • Universal 1005 - page 2

    Model 1005 24-Port Ethernet™ Repeater Hub 20 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Compliance Information UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations: This equipment has been tested and ...

  • Universal 1005 - page 3

    T able of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Model 1005 Repeater Hub . . . . . . . . . . . . . . . . . . . . . . .1 Model 1005 Repeater Hub Features . . . . . . . . . . . . . . . . . . . . .1 Networking the Model 1005 Repeater Hub . . . . . . . . . . . . . . . .2 Model 1005 Repeater Hub Connectors, Indic ...

  • Universal 1005 - page 4

    Model 1005 24-Port 18 1 Ethernet™ Repeater Hub 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks Model 1005 24-Port Ethernet™ Repeater Hub. A working knowledge of local area network (LAN) operations, including familiarity with communications protocols u ...

  • Universal 1005 - page 5

    Model 1005 24-Port 2 17 Ethernet™ Repeater Hub Networking the Model 1005 Repeater Hub The Model 1005 Repeater Hub can be installed in an Ethernet network by connecting 10BaseT cable between RJ-45 connectors on the front of the hubs. Additionally, the SIC slot on the back of the hub can be used to connect various media, selectable from among 10Bas ...

  • Universal 1005 - page 6

    Model 1005 24-Port 16 3 Ethernet™ Repeater Hub 1005 Repeater Connectors, Indicators and Switch Connectors Twenty-four (24) RJ-45 10BaseT connectors are located on the front of the Model 1005 Repeater Hub. One (1) power connector is located on the back of the Model 1005 Repeater Hub. NOTE: Slide-In cards (SICs), if installed at the back of the Mod ...

  • Universal 1005 - page 7

    Model 1005 24-Port 4 15 Ethernet ™ Repeater Hub 4. OPERA TION The Model 1005 Repeater Hub requires no intervention beyond occasionally monitoring the Power and Status LEDs. Monitoring Power LED The Power LED displays a steady green light when the Model 1005 Repeater Hub is connected to power. Monitoring Status LEDs The Link/Partition LED displays ...

  • Universal 1005 - page 8

    Model 1005 24-Port 14 5 Ethernet ™ Repeater Hub Connecting Power to Model 1005 Repeater To power ON the Model 1005 Repeater: 1. At Model 1005 Repeater back, locate the Unit power receptacle and associated fuse. 2. Verify that fuse is installed at correct setting for power source voltage. NOTE: The installed fuse rating is indicated by the reading ...

  • Universal 1005 - page 9

    Model 1005 24-Port 6 13 Ethernet ™ Repeater Hub Male AUI Connector/PC Connection The male AUI card (E-AUI- DC-SIC) provides a male AUI connector for connection, through an AUI drop cable, to a 10Base5 port on a powered PC. Fiber Optic Connector/10BaseFL Connection The fiber optic card (E-FRL-SIC) provides one set of transmit (TX) and receive (RX) ...

  • Universal 1005 - page 10

    Model 1005 24-Port 12 7 Ethernet ™ Repeater Hub 3. INST ALLA TION To install the Model 1005 Repeater Hub: • Unpack the Model 1005 Repeater Hub. • Install Model 1005 Repeater Hub on flat surface. • Optionally install Slide In Card. • Connect Cable to SIC and RJ-45 connector. • Connect Model 1005 Repeater Hub to power. Direction is provid ...

  • Universal 1005 - page 11

    T wisted Pair Connector/10BaseT Connection To connect 10BaseT Cable to Model 1005 Repeater RJ-45 connectors: 1. Locate or build 10BaseT cables that are: • 802.3 compliant (See page 18) • correct ( straight through or crossover ) cable configuration for site installation (See page 6) • male RJ-45 plug 2. Connect male RJ-45 plug connector at on ...

  • Universal 1005 - page 12

    Model 1005 24-Port Ethernet ™ Repeater Hub 10 9 Connecting Cable to SIC and RJ-45 Connectors Connections between installed Model 1005 Repeater Hub SICs or between a Model 1005 Repeater Hub SIC and a hub or terminal device include: • Female AUI Connector/10Base5 • Male AUI Connector/PC • RJ Connector/10BaseT • BNC Connector/10Base2 • ST ...

Manufacturer Universal Category Switch

Documents that we receive from a manufacturer of a Universal 1005 can be divided into several groups. They are, among others:
- Universal technical drawings
- 1005 manuals
- Universal product data sheets
- information booklets
- or energy labels Universal 1005
All of them are important, but the most important information from the point of view of use of the device are in the user manual Universal 1005.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Universal 1005, service manual, brief instructions and user manuals Universal 1005. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Universal 1005.

Similar manuals

A complete manual for the device Universal 1005, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Universal 1005 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Universal 1005.

A complete Universal manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Universal 1005 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Universal 1005, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Universal 1005, that we can find in the current document
3. Tips how to use the basic functions of the device Universal 1005 - which should help us in our first steps of using Universal 1005
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Universal 1005
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Universal 1005 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Universal 1005?

Use the form below

If you did not solve your problem by using a manual Universal 1005, ask a question using the form below. If a user had a similar problem with Universal 1005 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)