Manual NEC GT1150

79 pages 2.61 mb
Download

Go to site of 79

Summary
  • NEC GT1150 - page 1

    LCD Pr ojector GT1150 User’ s Manual Printed in Japan 7N8P0112 GT1150 User's Manual NEC ...

  • NEC GT1150 - page 2

    R M E N U E N T E R C A N C E L SELECT LENS SHIFT LEFT ZOOM FOCUS UP DOW N RIGHT A U T O A D J U S T L A M P S T A T U S P O W E R O N /S T A N D B Y S O U R C E LCD Pr ojector GT1150 User’ s Manual ...

  • NEC GT1150 - page 3

    DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Address: Tel. No.: NEC Techn ...

  • NEC GT1150 - page 4

    E – ii IMPOR T ANT INFORMA TION Precautions Please read this manual carefully bef ore using your NEC GT1150 Pro- jector and keep the man ual handy for future ref erence. Y our serial number is located on the bottom of your GT1150. Record it here: CAUTION T o tur n off main power , be sure to remo v e the plug from pow er outlet. The pow er outlet ...

  • NEC GT1150 - page 5

    E – iii INFORMA TIONS IMPOR T ANTES Précautions V euillez lire ce manuel av ec attention av ant d’utiliser votre projecteur NEC GT1150 et gardez ce manuel à por tée de main afin de pouv oir y recourir facilement. V otre numéro de série est situé sur le fond de v otre GT1150. Repor tez- le ici: A TTENTION P our couper complètement l’ali ...

  • NEC GT1150 - page 6

    E – iv Important Safeguards These safety instructions are to ensure the long lif e of your projector and to prev ent fire and shoc k. Please read them carefully and heed all warnings. Installation 1. For best results , use your projector in a darkened room. 2. Place the projector on a flat, lev el surf ace in a dr y area awa y from dust and moist ...

  • NEC GT1150 - page 7

    E – v Mesures de sécurité importantes Ces instructions de sécur ité garantissent la longé vité de votre projecteur et préviennent les risques d’incendie et de décharge électrique. Lisez- les et respectez les conseils. Installation 1. P our de meilleurs résultats‚ utilisez votre projecteur dans une pièce sombre . 2. Placez le projec ...

  • NEC GT1150 - page 8

    E – vi T ABLE OF CONTENTS 1. INTRODUCTION What's in the Box? ....................................................................................... E-1 Getting to Know Y our GT1150 Projector ...................................................... E-2 Attaching the lens hood cap to the lens hood with the supplied string and rivet ............ ...

  • NEC GT1150 - page 9

    E – 1 What's in the Box? Make sure your bo x contains ev er ything listed. If any pieces are missing, contact y our dealer. Please sav e the original box and packing materials if y ou ev er need to ship your GT1150 Projector . 1. INTRODUCTION R M E N U E N T E R C A N C E L SE LE C T LE N S S H IF T L E F T Z O OM F O C U S U P D O W N R IGH ...

  • NEC GT1150 - page 10

    E – 2 R E M O T E 1 P C C O N T R O L REM OTE 2 A C IN S C , T R IG G E R O U TO U T IN I N D V IL / M O N O L / M O N O R G B 1 R G B 2 V I D E O 1 V I D E O 2 S - V I D E O A U D I O O U T R / C r G / Y B / C b V H /H V M O N IT O R O U T R L /M O N O R L / M O N O R L / M O N O R R M E N U E N T E R C A N C E L S E L E C T L E N S S H IF T L E ...

  • NEC GT1150 - page 11

    E – 3 M E N U E N T E R C A N C E L S E L E C T L E N S S H IF T L E F T Z O O M F O C U S U P D O W N R IG H T A U T O A D J U S T L A M P S T A T U S P O W E R O N /S T A N D B Y S O U R C E Depression for foot (4 locations) Speaker (Left) Remote sensor Speaker (Right) Remote sensor Carrying handle Lamp cover DVI L/MONO L/MONO RGB 1 RGB 2 VIDEO ...

  • NEC GT1150 - page 12

    E – 4 Attaching the lens hood cap to the lens hood with the supplied string and rivet 1. Thr ead the string thr ough the hole on the lens hood cap. Lens hood cap String 2. Use the rivet to attach the string to the bottom of the pr ojector . D V I L / M O N O L / M O N O R G B 1 R G B 2 V I D E O 1 V I D E O 2 S - V I D E O A U D I O O U T R / C r ...

  • NEC GT1150 - page 13

    E – 5 E N T E R C A N C E L LENS SHIFT LEFT ZOOM FOCUS UP DOWN RIGHT A U T O A D JU S T L A M P S T A T U S P O W ER O N /S T A N D B Y S O U R C E SELECT M E N U 10 9 8 7 6 5 4 2 3 11 12 13 1 1. Power Button (ON / ST AND BY) Use this button to turn the power on and off when the po wer is sup- plied and the projector is in standby mode. NOTE: T o ...

  • NEC GT1150 - page 14

    E – 6 DVI L/MONO L/MONO RGB 2 RGB 1 VIDEO 1 VIDEO 2 S - VIDEO AUDIO OUT R/Cr G/Y B/Cb V H/HV MONITOR OUT R L/MONO R L/MONO R L/MONO R R 1 5 8 9 11 10 12 13 7 6 3 4 2 1. DVI Connector This connector can be used to accept digital or analog signal output from a computer with a D VI connector. 2. DVI Audio Input Jacks (RCA) These are the left channel ...

  • NEC GT1150 - page 15

    E – 7 REMOTE 1 PC CONTROL R EM O TE 2 AC IN SC, TRIGGER OUT OUT IN IN 3 5 4 1 2 6 9 8 7 LENS SHIFT LEFT ZOOM FOCUS UP DOWN RIG 1. PC CONTROL Connectors (Mini D-Sub 9 pin) For system e xpansion such as PC-Control. IN: connect to the external equipment such as PC. OUT: for daisy-chaining m ultiple projectors and operating them with the same externa ...

  • NEC GT1150 - page 16

    E – 8 OFF + - PICTURE ADJUST ABC DEF GHI JKL MNO PQR STU ,. UNDO CANCEL TEST PICTURE KEYSTONE AMPLITUDE ENTRYLIST SOUND OSD MUTE MAGNIFY HELP INFO. POSITION AUTO PIXEL VWX YZ? WHITE BAL. IMAGE ON POWER MENU ENTER 12 3 45 6 7 0 8 9 ADDRESS PROJECTOR R G B LENS SHUTTER BS + - + - FOCUS ZOOM CTL LENS 2 5 6 7 9 10 12 13 17 20 21 22 24 26 2 5 2 3 1 9 ...

  • NEC GT1150 - page 17

    E – 9 OFF + - PICTURE ADJUST ABC DEF G JKL MN S TU WHITE BAL. IMAGE ON POWER MENU ENTER 12 4 A D D R E S S P R O J E BS 27 28 10. UNDO Press to retur n the adjustments and settings to the pre vious condition. While pressing and holding CTL, pressing this button clears the entire menus or adjustment/setting screen. At this time the adjustments/set ...

  • NEC GT1150 - page 18

    E – 10 7m 30˚ 30˚ Remote Control Pr ecautions • The remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of the main unit, or when there is an obstacle in the path. • When remote control buttons are pressed and held, projector’ s func- tion ke ys may not operate . • Do not ...

  • NEC GT1150 - page 19

    E – 11 Using the Remote Control in Wir ed Operation Connect one end of the supplied remote cable to the REMO TE 2 IN mini jack and the other end to the remote jac k on the remote control. T erminal panel (Left) REMOTE 1 PC CONTROL REMOTE 2 AC IN SC, TRIGGER OUT OUT IN IN O F F + - P IC T UR E A D JU ST ABC DEF GHI JKL MNO PQR STU ,. UNDO CANCEL E ...

  • NEC GT1150 - page 20

    E – 12 2. INST ALLA TION This section describes how to set up your GT1150 projector and ho w to connect video and audio sources. Setting Up Y our GT1150 Projector Y our GT1150 Projector is simple to set up and use. But before y ou get star ted, you must first: List of Screen Sizes Screen size Width (H) Height (V) m feet m feet 40" 0.8 2.7 0. ...

  • NEC GT1150 - page 21

    E-13 Lens Shift Adjustable Range Normal Position 0.5V (0.43V) Desktop/Front Vertical 0.5V (0.43V) Normal Position Ceiling/Front Vertical + - + - Normal Position 0.25H Horizontal Lens Shift Range for Desktop and Ceiling Mount Application The diagram below shows the location of the image posit ion in the lens. The lens can be shifted within the shade ...

  • NEC GT1150 - page 22

    E – 14 Optional Lens Installation This section describes how to install the lens. Before installation * Determine the optional lens to be used to obtain a desired projection distance. There are four optional lenses available: GT10RL (Fixed short throw lens) GT19ZL, GT13ZL and GT34ZL (Zoom lens) * Press the power button (ON/ST AND BY) on the proje ...

  • NEC GT1150 - page 23

    E – 15 R E M O T E 1 P C C O N T R O L R E M O T E 2 A C I N S C , T R I G G E R O U T O U T I N I N V I L / M O N O L / M O N O R G B 1 R G B 2 V I D E O 1 V I D E O 2 S - V I D E O A U D I O O U T R / C r G / Y B / C b V H / H V M O N I T O R O U T R L / M O N O R L / M O N O R L / M O N O R R M E N U E N T E R C A N C E L SE LE CT LE NS SH IFT ...

  • NEC GT1150 - page 24

    E – 16 Setting up for Double Stacking in Link Mode Master projector NOTE: SW 1 Level and SW 2 Level of Switcher Control are not available on Link Mode. For doub le stacking, f ollow the instructions described below . 1) Stacking the Projectors 1-1. Place the projectors at the proper height f or best screen to projec- tor relationship . Mak e sure ...

  • NEC GT1150 - page 25

    E – 17 6) Link Mode Setting 6-1 Assign a unique Projector ID f or each projector . 6-1-1. Select [Projector Options] → [Setup] → [Page 6] → [Projector ID]. See page E-49 for specifying ID. 6-1-2. Specify a unique projector ID for each projector . 6-2 Select the same communication speed f or all the projectors. 6-2-1. Select [Projector Optio ...

  • NEC GT1150 - page 26

    E – 18 Desktop Rear Projection Use [Projector Options] → [Setup] → [P age 1] → [Orientation] to se- lect "Desktop Rear". (See page E-47.) D V I L / M O N O L / M O N O R G B 1 R G B 2 V I D E O 1 V I D E O 2 S - V I D E O A U D I O O U T R / C r G / Y B / C b V H / H V M O N I T O R O U T R L / M O N O R L / M O N O R L / M O N O ...

  • NEC GT1150 - page 27

    E – 19 3. BASIC OPERA TION Connecting the Power Cable and T urn on the Projector Before y ou turn on your projector , ensure that the computer or video source is tur ned on and that y our lens cap is removed. 1. Connect the supplied pow er cable to the projector . Plug the supplied pow er cable in the wall outlet. The projector will go into its s ...

  • NEC GT1150 - page 28

    E – 20 T o turn of f the projector: First press the P ower (ON/ST ANDBY) button on the projector cabinet or the POER OFF b utton on the remote control for a minimum of tw o seconds. The po wer indicator will glow or ange. After the projector tur ns off , the cooling fans k eep operating for ONE min ute. NOTE: Do not disconnect the power cable dur ...

  • NEC GT1150 - page 29

    E – 21 Set up the projector 1. T urn on the pr ojector 2. Select your type of pr ojection: Desktop fr ont, ceiling r ear , desktop r ear , and ceiling fr ont. 3. Display the test pattern by pr essing the TEST button on the r e- mote contr ol or using the menu. TEST 4. Adjust the ima ge position and the image size . (1) Press and hold the CTL butt ...

  • NEC GT1150 - page 30

    E – 22 Other adjustments Rotate the projector to make the image square. Use keystone correction f or proper adjustment. Rotate the f our feet to make the image square to the screen. R E M O TE 1 P C C O N T R O L REMOTE 2 A C IN S C , TR IG G E R O U T O U T IN D V I L /M O N O L /M O N O R G B 1 R G B 2 V ID E O 1 V ID E O 2 S - V ID E O A U D I ...

  • NEC GT1150 - page 31

    E – 23 4. CONNECTIONS When used in standalone operation Connecting Y our VCR Or Laser Disc Player Use common RCA cables (not pro vided) to connect your VCR or laser disc play er to your GT1150 Projector . T o make these connections , simply: 1. T urn off the power to your pr ojector and VCR or laser disc player . 2. Connect one end of your RCA ca ...

  • NEC GT1150 - page 32

    E – 24 Connecting Y our DVD Player with Component Output Use the optional Component V cable to connect your D VD pla yer with the component output to your GT1150 Projector . T o make these connections, simply: 1. T urn off the power to your pr ojector and DVD player . 2. Use the optional Component V cable to connect your D VD player to the RGB 1 ...

  • NEC GT1150 - page 33

    E – 25 Connecting Y our PC Or Macintosh Computer Connecting your PC or Macintosh computer to GT1150 Projector will enab le y ou to project y our computer's screen image for an impressiv e presentation. T o connect to a PC or Macintosh : 1. T urn off the power to your pr ojector and computer . 2. Use the supplied RGB signal cable to connect y ...

  • NEC GT1150 - page 34

    E – 26 Connecting an Exter nal Monitor Y ou can connect a separate, e xter nal monitor to your GT1150 projec- tor to simultaneously vie w on a monitor the RGB analog, D VI analog, or component image you're projecting. T o do so: 1. T urn off the power to your pr ojector , monitor and computer . 2. Use a 15-pin cable to connect your monitor t ...

  • NEC GT1150 - page 35

    E – 27 Connecting to a Single W orkstation Y ou can connect a workstation to your GT1150 projector . T o do so: 1. T urn off the power to your pr ojector and workstation. 2. Use a BNC x 5 cable to connect your workstation and the RGB 1 connectors on your pr ojector . 3. T urn on the pr ojector and a workstation. DVI L/MONO L/MONO RGB 2 RGB 1 VIDE ...

  • NEC GT1150 - page 36

    E – 28 REMOTE 1 PC CONTROL REMOTE 2 SC, TRIGGER OUT OUT IN IN RGB 2 RGB 1 VIDEO 1 VIDEO 2 S VIDEO AUDIO OUT R/Cr G/Y B/Cb V H/HV MONITOR OUT L/MONO R L/MONO R L/MONO R L/MONO R When Used with One Switcher (ISS-6020/ISS-6020G) Up to 10 input signals can be accepted when the projector is connected to one Switcher . Using the projector with the Swit ...

  • NEC GT1150 - page 37

    E – 29 When Used with T wo or More Switchers (100 Inputs) Up to 100 inputs can be accepted using the NEC ISS-6020 Switcher . How to make connections: 1 Connect the REMO TE 1 terminal of the master Switcher to the REMO TE 1 of the projector using the optional contr ol cable (15p-15p/CTL-6010). 2 Ne xt connect the REMOTE 2 terminal of the master Sw ...

  • NEC GT1150 - page 38

    E – 30 Set the DIP switch (S8601) of the Switcher as follows: The Projector Slot 1 of the Master Slot 2 of the Master Slot 3 of the Master Slot 4 of the Master Slot 5 of the Master Slot 6 of the Master Slot 7 of the Master Slot 8 of the Master Slot 9 of the Master Slot 10 of the Master Master Slave 1 Slave 2 Slave 3 Slave 4 Slave 5 Slave 6 Slave ...

  • NEC GT1150 - page 39

    E – 31 REMOTE 1 Connector Pin Configuration of Optional CTL-6010 Cable REMOTE 1 connector of the Switcher mini D- sub 15 pin (female) REMOTE 1 connector of the Projector mini D-sub 15 pin (female) Shield (frame ground) Pins without a number are open. 51 42 3 10 11 12 13 14 15 6 97 8 This connector is used f or either connecting the ISS-6020/ISS-6 ...

  • NEC GT1150 - page 40

    E – 32 When used in stand alone operation. Pin No. 14 5 10 3 4,8,12,11 SHORT/OPEN SHORT OPEN SHORT OPEN SHORT OPEN SHORT OPEN FUNCTION External control mode ON External control mode OFF POWER ON POWER OFF PICTURE MUTE ON PICTURE MUTE OFF MUTE SOUND ON MUTE SOUND OFF * When the combinations other than specified in the abo ve tab le are selected, t ...

  • NEC GT1150 - page 41

    E – 33 PC CONTROL REMOTE 2 OUT OUT IN IN Operating Multiple Projector with Remote Contr ol Y ou can operate multiple projectors with the same remote control in wireless oper ation. T o do so: 1. Select [Advanced Menu] → [Pr ojector Options] → [Setup] → [P age 6] → [Pr ojector ID] and assign an ID number to each pr ojector . See also page ...

  • NEC GT1150 - page 42

    E – 34 L/MONO RGB 2 MONITOR OUT R PC CONTROL OUT IN L/MONO RGB 2 MONITOR OUT R PC CONTROL OUT IN Using the PC CONTROL connectors The Link mode function allows y ou to adjust or set multiple projectors using the RGB 2 and the PC CONTROL connectors. Connection for Double Stacking in Link Mode Master projector Bi-directional RS-232C cable (not suppl ...

  • NEC GT1150 - page 43

    E – 35 5. OPERA TION This section describes how to select a computer or video source, ad- just the picture and sound, edit a signal and adjust all other settings and adjustments f or proper projector set-up. General Controls Before y ou tur n on the projector ensure that the computer or video source is turned on and that the lens hood cap is remo ...

  • NEC GT1150 - page 44

    E – 36 Customizing Basic/Custom Menu The Basic/Custom menu can be customized to meet y our requirements. Selecting a menu item from the “Basic/Custom Men u Edit” list, allows you to custom tailor the menu items to y our needs. 1. Select “Basic/Custom Menu Edit” to display the “Basic/Custom Menu Edit” scr een. 2. Use the ▲ or ▼ but ...

  • NEC GT1150 - page 45

    E – 37 List of Direct Button Combinations CTL+ SOURCE (1-10) Switches to any selected signal f ound in the Entry List. T o enable this combination, you must first assign specific remote b uttons f or direct input selection in the Entry Edit window . CTL+ ENTER (While displa ying Entr y list) Displa ys the Entr y Edit Command window . CTL+CANCEL R ...

  • NEC GT1150 - page 46

    E – 38 When Switcher Control is turned on: Advanced Menu Source Select Picture Volume Image Options Projector Options Tools Help Test Pattern 1.RGB1 2.RGB2 3.Video1 4.Video2 5.S-Video 6.DVI (DIGITAL) 7.DVI (ANALOG) 8.PC Card Viewer more Entry List 9.RGB1 (Video) 0.RGB1 (S-Video) RGB2 (S-Video) RGB2 (Video) Brightness / Contrast / Color / Hue / Sh ...

  • NEC GT1150 - page 47

    E – 39 Menu windows or dialog boxes typically have the following elements: Title bar : Indicates the menu title . Highlight: Indicates the selected menu or item. Solid triangle: Indicates fur ther choices are av ailable . A highlighted triangle indicates the item is active. T ab: Indicates a g roup of features in a dialog bo x. Selecting on any t ...

  • NEC GT1150 - page 48

    E – 40 Menu Descriptions & Functions Source Select When Switcher Control is set to "Standalone", you can select a video source such as a VCR, D VD pla yer , laser disc play er , computer , or document camera depending on what is connected to your inputs , or PC Card Viewer (PC card installed). Enables y ou to select a video source s ...

  • NEC GT1150 - page 49

    E – 41 A press of the MENU button displa ys the toolbar; a press of the MENU button again displa ys the Menu and hereafter each press of the MENU button s witches displaying betw een the Menu and the toolbar . Prev Play Jump Setup View Next Stop Select Delete PC Card Viewer This feature enab les y ou to make presentations using a PC card that con ...

  • NEC GT1150 - page 50

    E – 42 Noise Reduction (not av ailable for RGB and PC Car d Viewer) Y ou can select three lev els video noise reduction. NOTE: The lower the Noise Reduction level, the better the image quality by way of higher video bandwidth. Image Options Keystone This feature corrects the k eystone (trapez oidal) distor tion to make the top of the screen longe ...

  • NEC GT1150 - page 51

    E – 43 First select an appropriate color matrix to fit your component signal for HDTV or SDTV . Then select an appropriate matrix type from B-Y/R-Y , Cb/Cr or Pb/Pr . White Balance (not availab le for PC Card Viewer) This allows you to adjust the white balance . Br ightness for each color (RGB)is used to adjust the blac k lev el of the screen; Co ...

  • NEC GT1150 - page 52

    E – 44 Factory Default Changes all adjustments and setting to the factory preset f or each source individually e xcept Lamp Hour Meter , Projector Usage, Lan- guage and Communication Speed. (T o reset the lamp usage time, see "Clear Lamp Hour Meter" on page E-48.) All Data ............... Reset all the settings for all the signals to th ...

  • NEC GT1150 - page 53

    E – 45 1. Open the On/OFF Timer window . 2. Select EDIT and press ENTER on the remote control to open the EDIT window . 3. Set the W eek, Da y , On-Time and Off-Time using the Select buttons and Source buttons (1 thru 10). T o cancel the on-time or off time, use Delete. 4. Select Set and press the ENTER b utton on the remote control to complete t ...

  • NEC GT1150 - page 54

    E – 46 [Page 3] Projector P ointer : This option is av aiable on the optional presentaion remote control (PR50KIT) only . This enables y ou to select from eight different P ointer icons for the "P ointer" button on y our remote control. After moving y our P ointer icon to the area you want on the screen, press the Magnify button on the ...

  • NEC GT1150 - page 55

    E – 47 Setup Enables y ou to set operating options. Press "OK" to sav e your changes f or all the features of P age1, P age2, P age3, Page 4, P age5 and Page6. [Page 1] Orientation: This reorients your image f or your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and cei ...

  • NEC GT1150 - page 56

    E – 48 [Page 4] Signal Select (RGB connector): Allows you to choose "VIDEO" or "S-VIDEO" f or RGB 1 or 2 con- nector . Normally select "Auto". [Page 3] Auto Adjust (RGB Only): When "A uto Adjust" is set to "On", the projector automatically de- ter mines the best resolution f or the current RGB inp ...

  • NEC GT1150 - page 57

    E – 49 [Page 5] Remote Sensor : This option determines which remote sensors on the projector are enabled in wireless mode . The options are: front, rear , right, or left. All check ed box es indicate that they can accept the infr ared signal from the supplied remote control. S-Video Mode Select: This feature is used to select the S-Video signal d ...

  • NEC GT1150 - page 58

    E – 50 T ools Provides tools f or capturing images and displaying files in a PC Card. NOTE: The "Capture" and "PC Card Files" features are required for a PC card. Capture: Allows you to capture an image from a source that is currently be- ing display ed. The image is sav ed as JPEG in the PC card. When you select Capture from ...

  • NEC GT1150 - page 59

    E – 51 Help Contents: Provides an online help about ho w to use the menus. An under- lined link means that you can mo ve to an adjustment item directly . Selecting the underlined link and pressing ENTER mov es to the corresponding adjustment item. NOTE: The Help Menu may not be displayed correctly when a UXGA signal is displayed. Inf or mation: D ...

  • NEC GT1150 - page 60

    E – 52 Using the PC Card V iewer function NOTE: When using the supplied software (CD-ROM) The software is designed to use with a personal computer only . Do not play the software on CD player . Doing so could cause damage to speakers. Features The Viewer f eature allows slides stored on a PC memory card (re- ferred to as PC card in this man ual) ...

  • NEC GT1150 - page 61

    E – 53 Installing the PC Card V iewer Software Before Installing P erform the follo wing before installing the PC Card Viewer softw are: • If Windo ws is already star ted, exit all applications . Installation may not be performed properly if any applications are running. Installation Install the view er software as described below . T o quit in ...

  • NEC GT1150 - page 62

    E – 54 Operating the PC Card V iewer Function from the Pr ojector (playback) This section describes the operation for sho wing slides of presentation documents created using the PC Card Viewer function with the projec- tor . It is also possible to mak e slides directly from the images projected with the projector . Projecting slides 1. Insert a P ...

  • NEC GT1150 - page 63

    E – 55 When the tool bar is not displayed: Press select 䊴 or 䊳 , or the FOLDER LIST button on the optional remote control to display f olders from a PC card in the projector’ s PC Card slot. Use the select 䊴 or 䊳 , or the SLIDE +/- button to adv ance to the next f older or return to the pre vious folder . Folder 02 : 0001 / 0008 Folder ...

  • NEC GT1150 - page 64

    E – 56 Capturing Images Displayed on the Pr ojector Storing images displayed on the projector on the PC car d Preparations: Inser t the PC card into the card slot. Inser t the PC card with the side with the inser tion direction arrow on the top. * Press the eject button to eject the card. 1. Project the ima ge you wish to stor e on the pr ojector ...

  • NEC GT1150 - page 65

    E – 57 Uninstalling the PC Card V iewer Software Even if y ou do no w kno w the PC Card Viewer software's file names or where they are stored, the PC Card View er software files can be easily remov ed from the system using the "Install/Uninstall Applications" con- trol panel in Windows. (Nor mally there is no need to perform this o ...

  • NEC GT1150 - page 66

    E – 58 This section describes the simple maintenance procedures you should follo w to replace the lamp and clean the filter . Replacing the Lamp After your lamp has been operating f or 1500 hours (2000 hours : Eco mode) or longer , the “Status” light in the cabinet will go on and the message will appear . Even though the lamp ma y still be wo ...

  • NEC GT1150 - page 67

    E – 59 Cleaning or Replacing the Filter The air-filter sponge keeps the inside of the MultiSync GT1150 Projec- tor free from dust or dir t and should be cleaned after e very 100 hours of operation (more often in dusty conditions). If the filter is dir ty or clogged, your projector ma y overheat. CA UTION • T urn off the power , wait for a full ...

  • NEC GT1150 - page 68

    E – 60 M E N U E N T E R C A N C E L S E L E C T L E N S S H I F T L E F T U P D O W N R I G H T A U T O A D J U S T L A M P S T A T U S P O W E R O N /S T A N D B Y S O U R C E M E N U C A N C E L S E L E C T A U T O A D J U S T S T A T U S P O W E R O N /S T A N D B Y S O U R C E M E N U C A N C E L SELECT A U T O A D J U S T L A M P S T A T U ...

  • NEC GT1150 - page 69

    E – 61 D V I L / M O N O L / M O N O R G B 1 R G B 2 V I D E O 1 V I D E O 2 S - V I D E O A U D I O O U T R / C r G / Y B / C b V H / H V M O N I T O R O U T R L / M O N O R L / M O N O R L / M O N O R R RE M O TE 1 PC C O N TR O L R E M O T E 2 A C IN S C , T R IG G E R O U T O U T IN IN D V I L / M O N O L / M O N O R G B 1 R G B 2 V I D E O 1 ...

  • NEC GT1150 - page 70

    E – 62 7. TROUBLESHOOTING This section helps you resolv e problems you ma y encounter while setting up or using the projector. Standby Normal ON-Timer setting Cooling down Lamp in High-Bright mode Lamp in Eco mode 3 minutes after lamp is turned on in Eco mode Lamp has reached its end of lif e (1500 hours or ov er) Lamp lif e has reached its end o ...

  • NEC GT1150 - page 71

    E – 63 • Is “PC Card Viewer” selected from the Source menu? • Is the PC card seated in the PC CARD slot completely? • Are slide data stored in the PC card? • Hav e the contents of the PC card been destroy ed? • While an image with over 1024 ⳯ 768 dots is projected, sev eral lines of information will be lost. Use the supplied softw ...

  • NEC GT1150 - page 72

    E – 64 8. SPECIFICA TIONS This section provides technical inf or mation about the GT1150 Projector’ s performance. Model Number GT1150 Optical LCD P anel 1.3" p-Si TFT active-matrix with Micro Lens Array , 1024 ⳯ 768 native resolution up to 1600 ⳯ 1200 with Adv anced AccuBlend T echnology Lamp 250 W NSH lamp Lamp Life Eco-mode 2000 hou ...

  • NEC GT1150 - page 73

    E – 65 LCD panels are inherently susceptible to bad pix els. The LCD panel ma y have pix el failures at the r ate of 0.01% or less. We pro vide information about our projectors through the World Wide Web at http://www .nec-pj.com/ The specifications are subject to change without notice. Mechanical Dimensions 16.5" (W) ⳯ 4.7" (H) ⳯ 1 ...

  • NEC GT1150 - page 74

    E – 66 Cabinet Dimensions Unit = inch (mm) M E N U E N T E R C A N C E L SELECT LENS SHIFT LEFT ZOOM FOCUS UP DOWN RIGHT AUTO ADJUST LAMP STATUS POWER ON/ STAND BY SOURCE DVI L/MONO L/MONO RGB 2 RGB1 VIDEO 1 VIDEO 2 S - VIDEO AUDIO OUT R/Cr G/Y B/Cb V H/HV MONITOR OUT R L/MONO R L/MONO R L/MONO R R REMOTE 1 PC CONTROL REMOTE 2 AC IN SC, TRIGGER O ...

  • NEC GT1150 - page 75

    E – 67 D-Sub Pin Assignments Mini D-Sub 15 Pin Connector (RGB2) Pin No. RGB Signal (Analog) YCbCr Signal Video / S-Video 1 Red Cr Composite video 2 Green or Sync on Green Y Y 3B l u e C b C 4 Ground 5 Ground 6 Red Ground Cr Ground Composite Ground 7 Green Ground Y Ground Y Ground 8 Blue Ground Cb Ground C Ground 9 No Connection 10 Sync Signal Gro ...

  • NEC GT1150 - page 76

    E – 68 Function Link mode Menu Source Select All (except PC Card Viewer , which is invalid in Link mode) L Picture All L V olume L Image Options K e ystone N Color T emperature L Lamp Mode N Gamma Correction L Advanced Options Aspect Ratio L Noise Reduction N Color Matrix N White Balance L Switcher Gain N P osition N Overscan L Clock N Resolution ...

  • NEC GT1150 - page 77

    E – 69 Timing Chart Y / N Signal Resolution Frequency H. Refresh Rate Dot Clock ( Dots ) ( kHz ) ( Hz ) ( MHz ) Y NTSC 640 ⳯ 480 15.734 60 - Y P AL 768 ⳯ 576 15.625 50 - Y SECAM 768 ⳯ 576 15.625 50 - Y VESA 640 ⳯ 480 31.47 59.94 25.175 Y IBM 640 ⳯ 480 31.47 60 25.175 Y MAC 640 ⳯ 480 31.47 60 25.175 Y MAC 640 ⳯ 480 34.97 66.67 31.334 ...

  • NEC GT1150 - page 78

    E – 70 Cable Connection Communication Pr otocol Baud rate: 38400 bps Data length: 8 bits P arity: No pa rit y Stop bit: One bit X on/off: None Communications Full duple x procedure: OPTION (D-SUB 9P) T o GND of PC NOTE: Pins 1, 4, 6 and 9 are used inside the projector . PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OF ...

  • NEC GT1150 - page 79

    LCD Pr ojector GT1150 User’ s Manual Printed in Japan 7N8P0112 GT1150 User's Manual NEC ...

Manufacturer NEC Category Projection Television

Documents that we receive from a manufacturer of a NEC GT1150 can be divided into several groups. They are, among others:
- NEC technical drawings
- GT1150 manuals
- NEC product data sheets
- information booklets
- or energy labels NEC GT1150
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC GT1150.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC GT1150, service manual, brief instructions and user manuals NEC GT1150. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC GT1150.

Similar manuals

A complete manual for the device NEC GT1150, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC GT1150 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC GT1150.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC GT1150 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC GT1150, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC GT1150, that we can find in the current document
3. Tips how to use the basic functions of the device NEC GT1150 - which should help us in our first steps of using NEC GT1150
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC GT1150
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC GT1150 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC GT1150?

Use the form below

If you did not solve your problem by using a manual NEC GT1150, ask a question using the form below. If a user had a similar problem with NEC GT1150 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)